2.Connect PC to Appliance

Connect a network cable directly from a DHCP enabled port on your configuring PC to the RJ-45 port on the appliance.Do not connect the PC or appliance to the local network at this point.

Connect to RJ-45 port

3. Open Web Browser

Open the web browser on the connected PC and type this IP address: 169.254.1.250.

If you get a message indicating a connection or security error, refer to Troubleshooting on the other side of this sheet for instructions.

4. Login to the Application

When the log in screen appears, enter the login name and password as “admin” then click Sign in.

The Avigilon™ Access Control Manager application main menu appears.

5. Accept EULABefore you can use the Avigilon™ Access Control Manager system, you must accept the end user license agreement.

1. Click the link below the END USER LICENSE NOT YET ACCEPTED error message.

2. Review the end user license agreement (EULA) then enter your name and company.

3. Click Accept.

This package includes:

1. Avigilon™ Access Control Manager Professional Appliance

8. Connect Appliance to Network

After the appliance restarts, disconnect the appliance from your configuring PC and move the appliance to its final location in the system.

1. Using a standard Ethernet cable, connect one end of the RJ-45 to an available RJ-45 port on the appliance.

2. Connect the other end of the Ethernet cable to the network.

For more information about configuring your system, see the Help files provided with the Avigilon™ Access Control Manager application.

1. Plug In the ApplianceWith the included power cord, plug the power plug into the back of the appliance and the electric plug into a wall outlet or surge protector.

6. Configure Port Settings

From the Avigilon™ Access Control Manager application main menu, perform these tasks:

1. From the top right corner, click Appliance. 2. Click the Ports tab. 3. From the Ethernet Configure page,

enter the required values. These include: Name, IP Address, and Network Gateway.

4. Click the Save button.

Consult your IT manager for the IP Address and Network Gateway values appropriate to your installation.

If you do not need to change the appliance hostname, manually restart the appliance now.

7. Edit HostnameThe default hostname for each appliance is ACM. If you need to set a specific hostname for the appliance, do so at this point before the appliance is connected to the network.

1. Select the Appliance tab.

2. Enter a new Host Name.

3. Click the Save button.

The appliance automatically restarts.Network Cable

Avigilon™ Access Control Manager ProfessionalGetting Started Guide

QUICK START GUIDE

Connect Power Cord

2. Power Cord

QUICK START GUIDE

Troubleshooting4. Click the “Confirm Security Exception” button

Click “Continue to this website (not recommended).”

Click the “Continue” button

Click the “Proceed anyway” button

When using Safari:

2. If a security exception screen appears...

1. Click the “Or you can add an exception...” link

2. Click the “Add Exception...” button

3. Click the “Get Certificate” button

1. If the Access Control Manager application site is not found and one of these messages appears

When using Chrome:

A. If the Link LED on your router is not lit, make sure the Ethernet cable is connected properly.

B. If a browser error message appears (like one of the messages shown above), check to ensure the network IP address is not set to 169.254.1.250 because that is the default IP address for the Access Control Manager Appliance port.

C. To ensure the cable is properly connected and there is no conflict with the IP address, type “ping 169.254.1.250“ at a DOS command prompt. If there is no response, please double check the connection and IP address. If the connection and IP address are correct, please call Avigilon Technical Support for assistance.

When using Firefox:

When using Internet Explorer:

When using Firefox:

When using Chrome:

When using Safari:

When using Internet Explorer:

Avigilon™ Access Control Manager Professional

© 2016 Avigilon Corporation. All rights reserved.AVIGILON, the AVIGILON logo, and AVIGILON CONTROL CENTER are trademarks of Avigilon Corporation. Other product names mentioned herein may be the trademarks of their respective owners. The absence of the symbols ™ and ® in proximity to each trademark in this document is not a disclaimer of ownership of the related trademark. Avigilon Corporation protects its innovations with patents issued in the United States of America and other jurisdictions worldwide. www.avigilon.com/patents Unless stated explicitly and in writing, no license is granted with respect to any copyright, industrial design, trademark, patent or other intellectual property rights of Avigilon Corporation or its licensors.

920-0121A-Rev2 | Oct 2016