quality report - amazon s3...generated with pix4dmapper pro version 4.2.27 quality report important:...
Post on 13-Mar-2020
1 Views
Preview:
TRANSCRIPT
Generated with Pix4Dmapper Pro version 4.2.27
Quality Report
Important: Click on the different icons for:
Help to analyze the results in the Quality Report
Additional information about the sections
Click here for additional tips to analyze the Quality Report
Summary
Project 2018_08_21_johnsonquarry_aeriaxProcessed 2018-08-21 16:58:26Camera Model Name(s) senseFlyAeriaX_18.5_6000x4000 (RGB)Average Ground Sampling Distance (GSD) 3.59 cm / 1.41 in
Area Covered 0.156 km2 / 15.6037 ha / 0.06 sq. mi. / 38.5776 acresTime for Initial Processing (without report) 27m:15s
Quality Check
Images median of 85469 keypoints per image
Dataset 136 out of 140 images calibrated (97%), all images enabled
Camera Optimization 2.88% relative difference between initial and optimized internal camera parameters
Matching median of 15261.5 matches per calibrated image
Georeferencing yes, no 3D GCP
Preview
Figure 1: Orthomosaic and the corresponding sparse Digital Surface Model (DSM) before densification.
Calibration Details
Number of Calibrated Images 136 out of 140Number of Geolocated Images 140 out of 140
Initial Image Positions
Figure 2: Top view of the initial image position. The green line follows the position of the images in time starting from the large blue dot.
Computed Image/GCPs/Manual Tie Points Positions
Uncertainty ellipses 1000x magnified
Figure 3: Offset between initial (blue dots) and computed (green dots) image positions as well as the offset between the GCPs initial positions (blue crosses) andtheir computed positions (green crosses) in the top-view (XY plane), front-view (XZ plane), and side-view (YZ plane). Red dots indicate disabled or uncalibrated
images. Dark green ellipses indicate the absolute position uncertainty of the bundle block adjustment result.
Absolute camera position and orientation uncertainties
X [m] Y [m] Z [m] Omega [degree] Phi [degree] Kappa [degree]Mean 0.004 0.004 0.003 0.002 0.002 0.001Sigma 0.003 0.002 0.001 0.001 0.000 0.000
Overlap
Number of overlapping images: 1 2 3 4 5+
Figure 4: Number of overlapping images computed for each pixel of the orthomosaic. Red and yellow areas indicate low overlap for which poor results may be generated. Green areas indicate an overlap of over 5 images for every pixel. Good
quality results will be generated as long as the number of keypoint matches is also sufficient for these areas (see Figure 5 for keypoint matches).
Bundle Block Adjustment Details
Number of 2D Keypoint Observations for Bundle Block Adjustment 2047066Number of 3D Points for Bundle Block Adjustment 718662Mean Reprojection Error [pixels] 0.188
Internal Camera Parameters
senseFlyAeriaX_18.5_6000x4000 (RGB). Sensor Dimensions: 23.456 [mm] x 15.637 [mm]
EXIF ID: senseFlyAeriaX_18.5_6000x4000
FocalLength
PrincipalPoint x
PrincipalPoint y R1 R2 R3 T1 T2
Initial Values 4732.300 [pixel]18.500 [mm]
3000.000 [pixel]11.728 [mm]
2000.000 [pixel]7.819 [mm] 0.000 0.000 0.000 0.000 0.000
Optimized Values 4868.925 [pixel]19.034 [mm]
3014.967 [pixel]11.786 [mm]
2025.098 [pixel]7.917 [mm] -0.017 -0.034 0.137 0.000 0.001
Uncertainties (Sigma) 0.138 [pixel]0.001 [mm]
0.092 [pixel]0.000 [mm]
0.083 [pixel]0.000 [mm] 0.000 0.001 0.001 0.000 0.000
CorrelatedIndepend en t
F
C0x
C0y
R1
R2
R3
T1
T2
The correlation between camera internal parametersdetermined by the bundle adjustment. White indicates a fullcorrelation between the parameters, ie. any change in one canbe fully compensated by the other. Black indicates that theparameter is completely independent, and is not affected byother parameters.
The number of Automatic Tie Points (ATPs) per pixel, averaged over all images of the camera model,is color coded between black and white. White indicates that, on average, more than 16 ATPs havebeen extracted at the pixel location. Black indicates that, on average, 0 ATPs have been extracted atthe pixel location. Click on the image to the see the average direction and magnitude of the re-projection error for each pixel. Note that the vectors are scaled for better visualization. The scale barindicates the magnitude of 1 pixel error.
2D Keypoints Table
Number of 2D Keypoints per Image Number of Matched 2D Keypoints per ImageMedian 85469 15261Min 67713 871Max 91507 29937Mean 84510 15052
3D Points from 2D Keypoint Matches
Number of 3D Points ObservedIn 2 Images 522606In 3 Images 96457In 4 Images 36926In 5 Images 18801In 6 Images 11189In 7 Images 7239In 8 Images 5055In 9 Images 3516In 10 Images 2753In 11 Images 2123In 12 Images 1692In 13 Images 1383In 14 Images 1162In 15 Images 969In 16 Images 802In 17 Images 660In 18 Images 591In 19 Images 510In 20 Images 467In 21 Images 378In 22 Images 343In 23 Images 296
In 24 Images 294In 25 Images 279In 26 Images 236In 27 Images 205In 28 Images 214In 29 Images 181In 30 Images 171In 31 Images 174In 32 Images 125In 33 Images 107In 34 Images 85In 35 Images 96In 36 Images 76In 37 Images 76In 38 Images 67In 39 Images 49In 40 Images 43In 41 Images 50In 42 Images 31In 43 Images 33In 44 Images 29In 45 Images 26In 46 Images 25In 47 Images 18In 48 Images 19In 49 Images 7In 50 Images 6In 51 Images 9In 52 Images 3In 53 Images 2In 54 Images 2In 55 Images 4In 56 Images 2
2D Keypoint Matches
Uncertainty ellipses 1000x magnified
Number of matches25 222 444 666 888 1111 1333 1555 1777 2000
Figure 5: Computed image positions with links between matched images. The darkness of the links indicates the number of matched 2D keypoints between theimages. Bright links indicate weak links and require manual tie points or more images. Dark green ellipses indicate the relative camera position uncertainty of the
bundle block adjustment result.
Relative camera position and orientation uncertainties
X [m] Y [m] Z [m] Omega [degree] Phi [degree] Kappa [degree]Mean 0.009 0.009 0.005 0.004 0.004 0.002Sigma 0.003 0.003 0.002 0.002 0.001 0.001
Geolocation Details
Absolute Geolocation Variance
Min Error [m] Max Error [m] Geolocation Error X [%] Geolocation Error Y [%] Geolocation Error Z [%]- -0.05 0.00 0.75 0.75-0.05 -0.04 0.00 0.00 0.00-0.04 -0.03 2.26 1.50 0.00-0.03 -0.02 2.26 0.00 5.26-0.02 -0.01 17.29 18.05 13.53-0.01 0.00 30.83 26.32 30.830.00 0.01 33.83 33.83 30.830.01 0.02 6.02 15.79 15.040.02 0.03 3.76 3.01 3.760.03 0.04 2.26 0.75 0.000.04 0.05 0.75 0.00 0.000.05 - 0.75 0.00 0.00Mean [m] 0.000035 -0.000009 -0.000106Sigma [m] 0.013019 0.011915 0.011398RMS Error [m] 0.013019 0.011915 0.011399
Min Error and Max Error represent geolocation error intervals between -1.5 and 1.5 times the maximum accuracy of all the images. Columns X, Y, Z show thepercentage of images with geolocation errors within the predefined error intervals. The geolocation error is the difference between the initial and computed image
positions. Note that the image geolocation errors do not correspond to the accuracy of the observed 3D points.
Relative Geolocation Variance
Relative Geolocation Error Images X [%] Images Y [%] Images Z [%][-1.00, 1.00] 93.23 96.99 99.25[-2.00, 2.00] 99.25 99.25 100.00[-3.00, 3.00] 100.00 100.00 100.00Mean of Geolocation Accuracy [m] 0.024939 0.024939 0.028238Sigma of Geolocation Accuracy [m] 0.000457 0.000457 0.000720
Images X, Y, Z represent the percentage of images with a relative geolocation error in X, Y, Z.
Geolocation Orientational Variance RMS [degree]Omega 4.553Phi 5.201Kappa 17.439
Geolocation RMS error of the orientation angles given by the difference between the initial and computed image orientation angles.
Initial Processing Details
System Information
HardwareCPU: Intel(R) Xeon(R) CPU E3-1505M v6 @ 3.00GHzRAM: 32GBGPU: NVIDIA Quadro M2200 (Driver: 23.21.13.9158)
Operating System Windows 10 Pro for Workstations, 64-bit
Coordinate Systems
Image Coordinate System WGS84Output Coordinate System WGS 84 / UTM zone 18N
Processing Options
Detected Template Mappingdefault*Keypoints Image Scale Full, Image Scale: 1Advanced: Matching Image Pairs Aerial Grid or CorridorAdvanced: Matching Strategy Use Geometrically Verified Matching: noAdvanced: Keypoint Extraction Targeted Number of Keypoints: Automatic
Advanced: CalibrationCalibration Method: StandardInternal Parameters Optimization: AllExternal Parameters Optimization: AllRematch: Auto, yes
Point Cloud Densification details
Processing Options
Image Scale multiscale, 1/2 (Half image size, Default)Point Density OptimalMinimum Number of Matches 33D Textured Mesh Generation noLOD Generated: noAdvanced: Image Groups group1Advanced: Use Processing Area yesAdvanced: Use Annotations yesTime for Point Cloud Densification 28m:17sTime for Point Cloud Classification NATime for 3D Textured Mesh Generation NA
Results
Number of Generated Tiles 1Number of 3D Densified Points 7738761
Average Density (per m3) 83.27
DSM, Orthomosaic and Index Details
Processing Options
DSM and Orthomosaic Resolution 1 x GSD (3.59 [cm/pixel])
DSM Filters Noise Filtering: yesSurface Smoothing: yes, Type: Sharp
Raster DSMGenerated: yesMethod: Inverse Distance WeightingMerge Tiles: yes
OrthomosaicGenerated: yes Merge Tiles: yesGeoTIFF Without Transparency: noGoogle Maps Tiles and KML: yes
Time for DSM Generation 05m:23sTime for Orthomosaic Generation 18m:22sTime for DTM Generation 00sTime for Contour Lines Generation 00sTime for Reflectance Map Generation 00sTime for Index Map Generation 00s
top related