programming an rotary encoder

No Sofware, No Apps, No Installations!

Learn How to Program your Encoder with the UBIFAST Configuration Tool

Program your Encoder in 8 Easy Steps!

Try it!Quick and

Easy!

Step 1Connect the Hardware

Power Device

Step 2Use a WiFi Enabled Device

Works with PC‘s, Tablet‘s and Smartphone‘s WiFi

Step 3Confi guration Instructions for Smart Phones

Connect to Wifi HotspotChoose POSITAL Confi guration Tool

at the network list

Open the WebbrowserGo to ubifast.fraba

Click Next and Start Confi guration

Step 4Confi gure Desired Incremental Parameters

Pulses Per Revolution (PPR)Any value between 1 and 16384 pulses

Incremental Pulse Direction„A before B“ or „B before A“

Incremental Output DriverPush-Pull (HTL) / 8 – 30 V Supply Voltage

RS422 (TTL) / 5 V Supply Voltage or

RS 422 (TTL) / 8–30 V Supply Voltage

Click Next

Step 5Enter Absolute Parameters

Singleturn Resolution 256 steps (8bit) to 65536 steps (16 bit)

Number of Turns 1 turn (singleturn) to

65536 turns (16 bit multiturn)

Code Binary or Gray Code Output

Preset Value 0 to maximum resolution

Click Next

Step 6Review Parameters

Verify the Incremental and Absolute parameters

Click „Confi gure“ to start programming the encoder

Step 7Your Confi guration was Successfull

Step 8Email Parameter to POSITAL for Future References