pearl® waterless car wash exterior treatment
Post on 16-Jul-2015
35 Views
Preview:
TRANSCRIPT
Pearl® Waterless Car
Wash Exterior Treatment
Welcome to Pearl Waterless International where we would
like to share with you the user, vehicle and environment
friendly process of exterior car cleaning and polishing, using
our waterless range of products. Whether you are familiar or
new to Waterless Car Wash systems our products are ideal
for commercial use and own car maintenance. Through
many years of experience in dealing with enquiries and auto
cleaning operations worldwide, we wish to provide you with
our successful process in order to deliver the perfect
showroom finish every time.
In line with all car care and valeting services the first stage should
always be a thorough inspection of the vehicle and where possible
out of direct sunlight. Make sure the vehicle is free from thick caked
on mud or sand around skirts, wheels and arches. If required, gently
rinse heavy muddy localized areas with minimal water usage.
Begin with Pearl Universal Cleaner and moderately mist spray all
wheel rims and tyre walls. Making your way around the vehicle
inspect the exterior paintwork for any ingrained dirt, tar, tree sap,
insect remains and bird droppings. Mist spray those areas also with
Universal Cleaner and leave for a short time to allow product to break
affecting substance down. Universal is tough on these substances
but gentle on surfaces and the environment.
Then starting with the roof, lightly spray half a section with Pearl Advanced Ultra Nano or Pearl
Professional ensuring adequate coverage. Run off and product drops indicate too much usage
and dry areas indicate too little. Average usage 160ml per saloon car.
Fold 2 Microfibre Cloths (MF) in half and half again to give you many clean surfaces to work with
and then spray one MF with either Advanced Ultra Nano or Professional to moisten, including the
localised areas pre-sprayed with Universal, such as grille and wind mirror castings prone for
ingrained insect splatter.
Then with little to no pressure carefully glide the moistened MF over the pre-treated panel in
straight lines, lifting product and dirt from the paintwork.
Using your second folded, dry and clean MF quickly buff the area to remove any residue and
create instant mirror gloss shine. Ensure your buffing MF remains completely dry.
Carry out this process until you have covered all the exterior surfaces from top to bottom working
around the vehicle as you go. Adopting the same process as before, simply spray wipe and buff
the area with separate MF`s. It is important to understand the effects of Wax contact with the
Windscreen (Pearl Advanced Ultra Nano contains premium Waxes). On glass use pre-sprayed
cloth to remove dirt or if too soiled lightly spray a fresh MF and wipe over glass ensuring to buff
with clean dry cloth, removing all residue to leave highly polished surface.
Using the MF that has been used to clean the vehicles surfaces, it is
time to revisit the pre-sprayed wheels. Firstly wipe over rims and tyre
walls to remove Universal residue, brake dust and dirt, then apply
Eco Tyre Shine using a sweeping motion to coat the tyre wall, simply
wipe and overspray and leave to air dry.
We understand the importance of correct methods and techniques to
maximise performance of products to deliver the very best results.
Our outlined procedure is a helpful guide however we fully
understand and appreciate that many detailers and users have or will
create their own system or process. What is most important is to
enjoy using our products and results by creating maximum shine in
minimum time whilst saving precious resources.
PearlWaterlessInternational.com
Visit
top related