Pearl® Waterless Car

Wash Exterior Treatment

Welcome to Pearl Waterless International where we would

like to share with you the user, vehicle and environment

friendly process of exterior car cleaning and polishing, using

our waterless range of products. Whether you are familiar or

new to Waterless Car Wash systems our products are ideal

for commercial use and own car maintenance. Through

many years of experience in dealing with enquiries and auto

cleaning operations worldwide, we wish to provide you with

our successful process in order to deliver the perfect

showroom finish every time.

In line with all car care and valeting services the first stage should

always be a thorough inspection of the vehicle and where possible

out of direct sunlight. Make sure the vehicle is free from thick caked

on mud or sand around skirts, wheels and arches. If required, gently

rinse heavy muddy localized areas with minimal water usage.

Begin with Pearl Universal Cleaner and moderately mist spray all

wheel rims and tyre walls. Making your way around the vehicle

inspect the exterior paintwork for any ingrained dirt, tar, tree sap,

insect remains and bird droppings. Mist spray those areas also with

Universal Cleaner and leave for a short time to allow product to break

affecting substance down. Universal is tough on these substances

but gentle on surfaces and the environment.

Then starting with the roof, lightly spray half a section with Pearl Advanced Ultra Nano or Pearl

Professional ensuring adequate coverage. Run off and product drops indicate too much usage

and dry areas indicate too little. Average usage 160ml per saloon car.

Fold 2 Microfibre Cloths (MF) in half and half again to give you many clean surfaces to work with

and then spray one MF with either Advanced Ultra Nano or Professional to moisten, including the

localised areas pre-sprayed with Universal, such as grille and wind mirror castings prone for

ingrained insect splatter.

Then with little to no pressure carefully glide the moistened MF over the pre-treated panel in

straight lines, lifting product and dirt from the paintwork.

Using your second folded, dry and clean MF quickly buff the area to remove any residue and

create instant mirror gloss shine. Ensure your buffing MF remains completely dry.

Carry out this process until you have covered all the exterior surfaces from top to bottom working

around the vehicle as you go. Adopting the same process as before, simply spray wipe and buff

the area with separate MF`s. It is important to understand the effects of Wax contact with the

Windscreen (Pearl Advanced Ultra Nano contains premium Waxes). On glass use pre-sprayed

cloth to remove dirt or if too soiled lightly spray a fresh MF and wipe over glass ensuring to buff

with clean dry cloth, removing all residue to leave highly polished surface.

Using the MF that has been used to clean the vehicles surfaces, it is

time to revisit the pre-sprayed wheels. Firstly wipe over rims and tyre

walls to remove Universal residue, brake dust and dirt, then apply

Eco Tyre Shine using a sweeping motion to coat the tyre wall, simply

wipe and overspray and leave to air dry.

We understand the importance of correct methods and techniques to

maximise performance of products to deliver the very best results.

Our outlined procedure is a helpful guide however we fully

understand and appreciate that many detailers and users have or will

create their own system or process. What is most important is to

enjoy using our products and results by creating maximum shine in

minimum time whilst saving precious resources.

PearlWaterlessInternational.com

Visit