panel chart
Post on 20-Dec-2015
236 Views
Preview:
DESCRIPTION
TRANSCRIPT
A pleasure to do business with
UN
PA
INT
ED
STA
ND
AR
DC
OL
OR
S
(Colors & Profiles)
ZAMIL STEEL, SAUDI ARABIAPre-Engineered Buildings Division
January 2005
Bare Zincalume (ZA)
Plain Aluminum (PA)
Galvanized Steel (GA)
Frost White (FW)
Cactus Green (CG)
Arabian Beige (AB)
Shasta Blue (SB)
Terra Cotta (TC)
(for mezzanine deck panels only)
Application - Roofs & Walls
Thickness - Zincalume Steel : 0.5 and 0.7 mm (nominal)Aluminum : 0.7 mm
Colors - XRW available in all ZS standard colorsXPD available in Frost White only
Aluminum is available in plain finish or XRW Frost White color
Single Skin Panels
200
100 100
200 200
800 mm PANEL WIDTH
50
EXTERIOR COLOR
200
TYPE ''G'' PROFILE
1000 mm PANEL WIDTH
EXTERIOR COLOR
30
TYPE ''R'' PROFILE
Application - Mezzanine decks
Thickness - Pre-galvanized steel : 0.7 mm
Colors - Unpainted
Application - Tempcon flat skin panel
Thickness - Zincalume steel : 0.5 mm (nominal)
Colors - XRW available in all ZS standard colors
Aluminum is available in plain finish or XRW Frost White color
EXTERIOR COLOR
1000 mm PANEL WIDTH
21.5
TYPE ''T'' PROFILE
1000 mm PANEL WIDTH
250 250 250 250
45 80 80 45EXTERIOR COLOR
34
TYPE ''S'' PROFILE
111111111
333
�
�
�
�
�
�
�
�
�
�
�
�
Roof Panel (Type "S")This newly developed type "S" panel is a superior structuralpanel, whose profile is designed to withstand heavy loads, such as roof snow loads and uplift loads resulting from high velocity (cyclonic) winds. It is the standard Zamil Steel roof panel and is also used as wall panels and as the outer skin of the high-rib Tempcon panel (TCSP).
The type "S" steel panel conforms to ASTM A 792M Grade 345B and is coated with a protective layer of Zincalume which is a 45 % zinc and 55 % aluminum alloy coating (150 g/m2 on both sides). Type "S" steel panels are available in two nominal thicknesses: 0.5 mm and 0.7 mm, and in all standard colors.
The type "S" aluminum panel conforms to ASTM B 209M Alloy 3003 H26 (or Alloy AA3003 H26) and is available in 0.7mm thickness only, and in plain finish or Frost White color. Other Zamil Steel standard colors are available subject to a minimum order of 3,000 m2. Consult a Zamil Steel representative for delivery periods.
Wall and Liner Panel (Type "R")This is the standard panel for exterior walls, interior liners, interior wall partitions and soffits.
The type "R" steel panel conforms to ASTM A 792M Grade 345B: Coating AZ150 or aluminum conforming to ASTM B 209 Alloy 3003 H26 (or Alloy AA3003 H26).
The steel panel is available in 0.5 mm nominal thickness only and in all standard colors. The aluminum panel is available in 0.7 mm thickness and in plain finish or Frost White (FW) color only. 0.5 mm thickness is also available, but its use is restricted to interiorliners.
Mezzanine Deck Panel (Type "G") This deep-ribbed type "G" panel is the standard Zamil Steel deck panel for mezzanines and floor systems. Although exceptionally strong, this panel is used as shuttering for mezzanine reinforced concrete floors and panel is not a substitute for the reinforcement of mezzanine concrete slabs.
The type "G" panel is available only as unpainted in 0.7 mm thick pre-galvanized coated steel conforming to ASTM A 653M SS Grade 550: Coating Z180.
Tempcon Flat Skin Panel (Type "T")This panel is used as the inner skin for high-rib and modified Tempcon panels (TCSP and TCMP) and as the inner and outer skins for low-rib Tempcon panels (TCTP).
The type "T" panel has the same specifications and color availability as that of the type ''S'' panel. When used as an inner skin it is available in Frost White (FW)color only. When used as an outer skin it is available in all standard colors.
Application - Exterior walls soffits, interior liners and partitions
Thickness - Zincalume steel : 0.5 mm (nominal)Aluminum : 0.5 and 0.7 mm
Colors - XRW available in all ZS standard colors
Aluminum is available in plain finish or XRW Frost White color
Aluminum : 0.5 and 0.7 mm
�
�
�
The standard unfaced fiberglass insulation has a density of 12 kg/m3 or 16 kg/m3. Higher densities are available upon request.
Insulation
Density(Kg/m3)
Thickness(mm)
R-Value(m2K/W)
12
16
50
75
100
50
75
100
1.250
1.875
2.500
1.923
2.564
1.282
Insulated Panels
Roof&
Walls
Walls
Roof
Application
Tempcon (Temperature Control Polyurethane Injected) PanelsThese factory-injected polyurethane sandwich panels are available in three different types. The injected polyurethane has a thermal conductivity of 0.018 W/m.K and a density of 40 kg/m3.
Skin TypeOverall
ThicknessA
(mm)
R-Value(m2.K/W) Panel Cross-Section
75 41 2.597
85 51 3.165
100
60
100
4.016
3.333
5.556
60
250 250 250
EXTERIORCOLOR
1000 PANEL WIDTH
250 250 250 250
EXTERIORCOLOR
250 250 250 250
EXTERIORCOLOR
AA
A,B
1000 PANEL WIDTH
250
1000 PANEL WIDTH
85
3.333
75 4.167
4.722
BB
CoreThickness
B(mm)
66
60
94
109
119
134
FASP (Field Assembled Sandwich) PanelsThese panels are composed of two single skin panels (type "S" on the roof and type "R" on the walls), 1.5 mm thick ''Z'' sub-purlins at the roof (sub-girts at the walls) and unfaced fiberglass insulation in between the panels. The depth of the ''Z'' sub-purlins/sub-girts varies depending on the insulation thickness. Available insulation thicknesses are 50 mm, 75 mm and 100 mm.
SELF DRILLING FASTENERSEXTERIOR PANEL
SUB-PURLIN / GIRTA
A
MAIN PURLIN / GIRT
SECTION A-A
INSULATION
INTERIOR PANEL
75 150
300 COVERAGE 300 COVERAGE
EXTRUDED POLYSTYRENE INSULATING BOARD
SCULPTUREDRIB
These panels feature an outside flat surface with concealed fasteners. They are suitable for aesthetical wall and liner applications.
The steel panel is available in 0.5 mm and 0.7 mm nominal thickness and in all Zamil Steel standard colors. The aluminum panel is available in 0.7 mm thickness in Frost White color only. The extruded polystyrene insulating board also provides rigity to the panel. It is 25 mm thick and has an R-value of 0.781 m2.K/W at 24oC mean temperature.
Flat Wall & Liner Panels
TYPE "Dx" (SCUPLTURED)
335 335
1212
25
TYPE "Ex" (FLAT)
TempconPanel
High-Rib''TCSP''
Low-Rib''TCTP''
Modified''TCMP''
''S''
Outer
''T''
AlumFoil
''T''
''T''
''T''
Inner
25
75
The information contained herein is accurate as of the date of its issue. Zamil Steel reserves the right to make changes, without prior notice, when deemed
necessary for the purpose of product improvement or otherwise. Please contact your nearest Zamil Steel representative for current offering.
Panel Specifications
SC = All Standard Colors � FW = Frost White � ZA = Bare Zincalume finish � PA = Plain Aluminum finish � GA = Plain Galvanized finish
Saudi Arabia PO Box 877 Dammam 31421 Phone (966 3) 847 1840 Fax (966 3) 847 1291 saudimarketing@zamilsteel.com www.zamilsteel.com
Paint Systems
XRW (exterior roof and wall) is a 25 micron modified polyester paint system applied on Zincalume coated steel or on plain aluminum. XRW is the standard offering of Zamil Steel for exterior panels. XRW paint is available in all ZS standard colors.
XPD (exterior premium durability) is the well-known PVF2 or PVDF (equivalent to Kynar 500*) paint system applied on Zincalume substrate over steel. This 25 micron thick paint system provides more protection to the panel in terms of longer life, long-term color and gloss finish durability. XPD paint is available in Frost White color only.
Kynar 500 is a Trademark of Atofina Chemicals, Inc.
EAVE GUTTER
DOWNSPOUT
Panel Related Accessories
CURVED EAVE
RIDGE PANEL
EXTERIOR COLOR
EXTERIOR COLOR
EXTERIOR COLOR25
25
16827.5
180
154
SEAM
105
INS
IDE
73INSIDE
EXTERIOR COLOR
Eave gutters, downspouts, curved eaves, wall flashingsand trims are produced from the same material (base metal, thickness, substrate coating, paint finish and color) as the wall panels of the building.
Ridge panels and roof panel related accessories are pro-duced from the same material as roof panels.
Base Metal
Steel
Aluminum
0.7
0.5
0.7
0.5
NominalThickness
(mm)
MetalSubstrate
Zincalume
Zincalume
Galvanized
None
MaterialSpecification
ASTM A 792MGrade 345B
ASTM A 792MGrade 345BCoating AZ150
Coating AZ150
ASTM B 209MAlloy 3003Temper H26(or Alloy AA3003 H26)
ASTM A 653MSS Grade 550Coating Z180
XRW
Paint Finish Colors
SC R
Panel Type Areas of Application
Roof & walls
Walls, liners, partitions & soffits
Mezzanine decks
None ZA S Roof
XRW SC S Roof & walls
SC T Tempcon skins
None ZA S Roof
XRW SC S
XPD FW S
None GA G
Walls & interior linersXRW FW R, T
Walls & interior linersNone PA R, T
None PA S, T, Dx, Ex Roof & walls
XRW SC S, T, Dx, Ex Roof & walls
top related