palaxpress ultra - the innovative high performance acrylic
Post on 22-Oct-2021
1 Views
Preview:
TRANSCRIPT
Implant Based Denture
Full Denture
Partial Denture
PalaXpress® ultra - the innovative high performance acrylic for all applications!
PalaXpress ultra, the new class of dental acrylic impressions with excellent performance values. The high-performance acrylic meets the requirements of the ISO 20795-2008 and exceeds the required values.
PalaXpress sets new standards by acheiving the highest fracture resistance in its class! No other cold-curing denture acrylic on the market comes anywhere near this level. Your advantage: extremely durable dentures, fewer complaints of microscopic fissures or breakages, thus satisfied customers and patients.
©2012 Heraeus Kulzer, LLC 300 Heraeus Way, South Bend, IN 46614 Phone: (800) 431-1785 Fax: (877) 271-5211 www.heraeusdentalusa.com
Your Advantage:The new PalaXpress ultra is durable, reliable and flexible - in all situations.
with PalaXpress ultra and Premium. Stephan Berger and Frank Seifert, Heraeus Kulzer GmbH.
with PalaXpress ultra and Premium. Dieter Ehret, Heraeus Kulzer GmbH.
with PalaXpress ultra and Premium. Stephan Berger and Frank Seifert, Heraeus Kulzer GmbH.
F
Pre damage
conventional acrylic
Paladon ultra
Conventional cold curing acrylic
PalaXpress Ultra
Flexural strength and modulus of elasticity in MPa | water absorption µg/mm3
PalaXpress ultra
DIN EN ISO
20795-1:2008
Normal value for cold
curing acrylic Normal value for heat
curing acrylic
Source:
Heraeus Kulzer GmbH
Research and development
Flexural Strengthensures that dentures are durable in
the long term without loss of
performance
Modulus of elasticity ensures that dentures withstand
stress and do not become brittle.
Water absorptionensures less discoloration and high
form stability.
> 60> 65
> 1500> 2000
< 32
71 2135
21,4
> 1,9
3
2,5
2
1,5
1
0,5
0
Selectaplus Probase Cold
Probase
Hot
Lucitone
199
ISO - Norm
Fracture toughness Kmax in MPa · √m
Source:Heraeus Kulzer GmbH Research and development
PalaXpress
ultra
1,75 1,63
2,512,30
1,70
New class of cold cure acrylics Heat curing acrylicCold curing acrylics
PalaXpress Ultra
surpasses competitor
values (cold curing
acrylics) by up to 50%
and far exceeds the
ISO standard.
70 60
Source: Heraeus Kulzer GmbH, Research & Development, documentation available
Flexural Strength in MPa
The Innovation: Added performance thanks to NanoPearls. PalaXpress ultra’s performance is based on a patented filler material. The so called NanoPearls are tiny natural rubber-based building blocks which delay the formation of microscopic fissures and are responsible for the enormous fracture resistance of this denture acrylic. The Nano-Pearls are formed when PalaXpress ultra powder and liquid are mixed. This means: a completely new type of denture acrylic.
The Biocompat-ibility Internationally Recognized Standards Fulfilled Completely! An increasing number of technicians and patients complain about allergic reactions. That is why we subjected PalaXpress ultra to rigorous legally stipulated tests (cytotoxicity / inhibition of cell growth, acute toxicity, sensitization, intracutaneous reactivity, genotoxicity) at an early stage. The certified result: PalaXpress ultra was classified as biocompatible (according to DIN EN ISO 10993 & DIN EN ISO 7405).
Breakage Test: A strict test according to ISO/CD standards! The test which proved the 50% greater fracture resistance is subject to a strict ISO standard (ISO/CD 20795-1) of the International Organization for Standardization. An object made from the test material is marked with a predetermined breakage point. Both small plates shown are right before breakage. The test makeup shows convincinly that Palaxpress ultra bends much more and therefore breaks much later. This means: proven higher performance.
Flexural Strength at a high level! PalaXpress ultra fulfills not only all demands of the voluntary ISO 1567: 1999 standard. In fact, the result exceeds these strict requirements. The flexural strength is 10 MPa (Mega Pascal) above the standard value (70 vs. 60 MPa) This means: No loss of performance and in
top related