packign specifications

Technical Data Sheet

Rigid mono PVC film laminated with PE film and then coated with PVdC. This highly crystalline

coating provides a significantly higher barrier against water vapour and PE layer gives necessary

flexibility to structure that helps in smooth cavity formation during thermoforming.

PROPERTIES

Construction 250µ PVC/25µ PE/40 g/m2 PVdC 10mil PVC/1mil PE/40 g/m

2 PVdC

Color Clear Clear

Density of PVC 1.35 g/cm3 1.35 g/cm

3

PVdC GSM Tolerance ± 7.5% ± 7.5%

Total Thickness 299µ 0.0117’’

Thickness Tolerance ± 7% ± 7%

Total GSM 400.5 ± 7% 400.5 ± 7%

Yield 2.49m2/kg (± 7%) 1751 in

2/lb (± 7%)

Dimensional Stability -8% max.(10min @ 140oC) -8% max. (10min @ 284

oF)

+3% max. +3% max.

Thermoforming range 100 o

C – 160 oC 212

oF – 320

oF

Tensile Strength min. 500kg/cm2 min. 7110 psi

Elongation min. 30% min. 30%

Vicat Softening Point 74 o

C – 76 oC 165.2

oF – 168.8

oF

Of base PVC

MVTR (38oC, 90% RH) 0.65 g/m

2/day 0.042 g/100 in

2/day

OTR (23oC, 50% RH) 0.55 cc/m

2/day 0.035 cc/100 in

2/day

Toxicity Non-toxic Non-toxic

FPTL 250 025 040 C1 TRIPAC 40

Regulatory Complies with the requirements of the European

Pharmacopeia and with the Commission Regulation (EU)

No. 10/2011.

Complies with the relevant US Code of Federal Regulations

CFR 21 and with the US Pharmacopeia where applicable.

Complies with the Directive 94/62/EC and with US CONEG

Regulations.

Formulation registered with US FDA, DMF 15884 Type III.

Production and quality controls according to cGMP.

Issued on: September 01, 2010.

Revision 02: Oct 2011.