packign specifications
TRANSCRIPT
Technical Data Sheet
Rigid mono PVC film laminated with PE film and then coated with PVdC. This highly crystalline
coating provides a significantly higher barrier against water vapour and PE layer gives necessary
flexibility to structure that helps in smooth cavity formation during thermoforming.
PROPERTIES
Construction 250µ PVC/25µ PE/40 g/m2 PVdC 10mil PVC/1mil PE/40 g/m
2 PVdC
Color Clear Clear
Density of PVC 1.35 g/cm3 1.35 g/cm
3
PVdC GSM Tolerance ± 7.5% ± 7.5%
Total Thickness 299µ 0.0117’’
Thickness Tolerance ± 7% ± 7%
Total GSM 400.5 ± 7% 400.5 ± 7%
Yield 2.49m2/kg (± 7%) 1751 in
2/lb (± 7%)
Dimensional Stability -8% max.(10min @ 140oC) -8% max. (10min @ 284
oF)
+3% max. +3% max.
Thermoforming range 100 o
C – 160 oC 212
oF – 320
oF
Tensile Strength min. 500kg/cm2 min. 7110 psi
Elongation min. 30% min. 30%
Vicat Softening Point 74 o
C – 76 oC 165.2
oF – 168.8
oF
Of base PVC
MVTR (38oC, 90% RH) 0.65 g/m
2/day 0.042 g/100 in
2/day
OTR (23oC, 50% RH) 0.55 cc/m
2/day 0.035 cc/100 in
2/day
Toxicity Non-toxic Non-toxic
FPTL 250 025 040 C1 TRIPAC 40
Regulatory Complies with the requirements of the European
Pharmacopeia and with the Commission Regulation (EU)
No. 10/2011.
Complies with the relevant US Code of Federal Regulations
CFR 21 and with the US Pharmacopeia where applicable.
Complies with the Directive 94/62/EC and with US CONEG
Regulations.
Formulation registered with US FDA, DMF 15884 Type III.
Production and quality controls according to cGMP.
Issued on: September 01, 2010.
Revision 02: Oct 2011.