noise canceling in 1-d data: presentation #10 seri rahayu abd rauf fatima boujarwah juan chen liyana...

Noise Canceling in 1-D Data: Presentation #10

Seri Rahayu Abd RaufFatima BoujarwahJuan ChenLiyana Mohd SharippArti Thumar

M2

Mar 28rd, 2005Chip Level Layout 2

Overall Project Objective: Implementing Noise Cancellation Algorithm in Hardware

Project Manager: Bobby Colyer

Status

• Design proposal (Done)

• Architecture proposal (Done)

• Size Estimates and Floorplan (Done)

• Gate Level Design

- Schematics (Done)

• To be done:– Layout (93%)– Spice simulation (85%)

Design Decisions

• Redesigned the bottom fpAdder to better fit the new floorplan.

• Changed the wiring of the inputs and outputs of the toplevel registers and muxes.

Previous Floorplan

New and Improved Floorplan

Layer Masks - Poly

Layer Masks - Metal 1

Layer Masks – Metal 2

Layer Masks – Metal 3

Layer Masks – Metal 4

The Chip

• Dimension– Width = 377.19µ– Height = 303.3450µ

• Area = 114418.701µ²

• Transistor count = 25859 • Density = 0.226 trans/µ²• Aspect ratio = 1: 1.24

Floating Point Multiplier

10-bit Wallace Tree Multiplier

20 bit output

2 10-bit inputs

Side components of the Multipliers

Center Side

Inputs

Output

fpMult: Simulation Results (Extracted RC)

Bits 8-15

Simulation Results (Schematics with Load Caps)

Bits 8-15

Floating Point Adder

fpAdder Components

AlignShift: Simulation Results (ExtractedRC)

Registers• 2 types of registers

16 bit Register: Simulation Results (ExtractedRC)

16 bit Register: Simulation Results (Schematic)

16-bit 2-1 Mux

Simulation Results (ExtractedRC)

Simulation Results (Schematics with Load)

ROM

Simulation Results (Schematics with Load)

ROM Analysis

• Rise Time = 672.21 ps

• Fall Time = 620.4 ps

Questions?