new daikin one+ initial software update · 2020. 10. 14. · © 2020 daikin north america, llc new...
Post on 13-Feb-2021
0 Views
Preview:
TRANSCRIPT
-
© 2020 Daikin North America, LLC
New Daikin One+ InitialSoftware Update
AUGUST 11, 2020
-
© 2020 Daikin North America, LLC 2
Have a setup board/backboard to work with.
-
© 2020 Daikin North America, LLC 3
Install baseplate of the Daikin One+ to the board.
-
© 2020 Daikin North America, LLC 4
Attach power supply to the baseplate.
NOTE:• Each Thermostat requires
24VAC/DC.
-
© 2020 Daikin North America, LLC 5
Attach thermostat to the baseplate and apply power.
-
© 2020 Daikin North America, LLC 6
Connect to the network and software will update automatically.
Note: For thermostats with software version 2.1.X or newer
-
© 2020 Daikin North America, LLC 7
Connect to the network and software will update automatically (con’t).
-
© 2020 Daikin North America, LLC 8
Connect to the network and software will update automatically (con’t).
-
© 2020 Daikin North America, LLC 9
Connect to the network and software will update automatically (con’t).
Note: Once connected to the internet this screen should show
-
© 2020 Daikin North America, LLC 10
Connect to the network and software will update automatically (con’t).
Note: Once connected to Dakin Cloud you will see these screens.
1. 2.
3. 4.
-
© 2020 Daikin North America, LLC 11
Verify the thermostat software is updated to the latest (v2.1.16 on 10/19/2020).
Click on Continue
Select P1/P2 option
Verify software is updatedClick on Learn More
Click on Continue
Click on Continue
-
© 2020 Daikin North America, LLC 12
Connect to the network and software will update automatically.
Note: For thermostats with software 1.6.X or older
-
© 2020 Daikin North America, LLC 13
Connect to the network and software will update automatically (con’t).
-
© 2020 Daikin North America, LLC 14
Connect to the network and software will update automatically (con’t).
Update will begin downloading.
Note: Once Wi-Fi connection is established and connected the update will be detected and load automatically.
-
© 2020 Daikin North America, LLC 15
When update is complete the System will automatically reboot. After it restarts you should see this welcome screen.
-
© 2020 Daikin North America, LLC 16
LEARN MORE AT WWW.DAIKINONE.COM
New Daikin One+ Initial� Software UpdateHave a setup board/backboard to work with.Install baseplate of the Daikin One+ to the board.Attach power supply to the baseplate. Attach thermostat to the baseplate and apply power.Connect to the network and software will update automatically.Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Verify the thermostat software is updated to the latest (v2.1.16 on 10/19/2020).Connect to the network and software will update automatically.Connect to the network and software will update automatically (con’t).Connect to the network and software will update automatically (con’t).Slide Number 15Slide Number 16
top related