© 2020 Daikin North America, LLC

New Daikin One+ InitialSoftware Update

AUGUST 11, 2020

© 2020 Daikin North America, LLC 2

Have a setup board/backboard to work with.

© 2020 Daikin North America, LLC 3

Install baseplate of the Daikin One+ to the board.

© 2020 Daikin North America, LLC 4

Attach power supply to the baseplate.

NOTE:• Each Thermostat requires

24VAC/DC.

© 2020 Daikin North America, LLC 5

Attach thermostat to the baseplate and apply power.

© 2020 Daikin North America, LLC 6

Connect to the network and software will update automatically.

Note: For thermostats with software version 2.1.X or newer

© 2020 Daikin North America, LLC 7

Connect to the network and software will update automatically (con’t).

© 2020 Daikin North America, LLC 8

Connect to the network and software will update automatically (con’t).

© 2020 Daikin North America, LLC 9

Connect to the network and software will update automatically (con’t).

Note: Once connected to the internet this screen should show

© 2020 Daikin North America, LLC 10

Connect to the network and software will update automatically (con’t).

Note: Once connected to Dakin Cloud you will see these screens.

1. 2.

3. 4.

© 2020 Daikin North America, LLC 11

Verify the thermostat software is updated to the latest (v2.1.16 on 10/19/2020).

Click on Continue

Select P1/P2 option

Verify software is updatedClick on Learn More

Click on Continue

Click on Continue

© 2020 Daikin North America, LLC 12

Connect to the network and software will update automatically.

Note: For thermostats with software 1.6.X or older

© 2020 Daikin North America, LLC 13

Connect to the network and software will update automatically (con’t).

© 2020 Daikin North America, LLC 14

Connect to the network and software will update automatically (con’t).

Update will begin downloading.

Note: Once Wi-Fi connection is established and connected the update will be detected and load automatically.

© 2020 Daikin North America, LLC 15

When update is complete the System will automatically reboot. After it restarts you should see this welcome screen.

© 2020 Daikin North America, LLC 16

LEARN MORE AT WWW.DAIKINONE.COM

New Daikin One+ Initial� Software UpdateHave a setup board/backboard to work with.Install baseplate of the Daikin One+ to the board.Attach power supply to the baseplate. Attach thermostat to the baseplate and apply power.Connect to the network and software will update automatically.Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Connect to the network and software will update automatically (con’t). Verify the thermostat software is updated to the latest (v2.1.16 on 10/19/2020).Connect to the network and software will update automatically.Connect to the network and software will update automatically (con’t).Connect to the network and software will update automatically (con’t).Slide Number 15Slide Number 16