mtech 2017 - fakultet strojarstva i brodogradnje · kekez krešimir, pažameta dražen, pavlek...
Post on 29-Aug-2019
215 Views
Preview:
TRANSCRIPT
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
October 04-07, 2017, Zadar, Croatia ORGANISED BY
Croatian Society for Materials andTribology – HDMT
Croatian Center for Nondestructivetesting – CENI
Croatian Society for Heat Treatment and Sufrace Engineering – HDTOIP
Croatian Society for materials protection–HDZaMa
WITH THE SUPPORT OF PARTNERS
STUDENT SPONSORS
SPONSORED BY
MTECH 2017
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
PROGRAM COMMITTEE:
Željko Alar (President), Vesna Alar, Franjo Cajner, Danko Ćorić, Gorazd Fajdiga
(UNI LJ), Imre Felde (UNI OBUDA), Hrvoje Ivanković (FKIT), Ivan Juraga, Ivica Kladarić
(SFSB), Darko Landek, Igor Majnarić (GRF), Damir Markučič, Božidar Matijević, Helena
Otmačić Ćurković (FKIT), Duško Pavletić (RITEH), Zdravko Schauperl, Božo Smoljan
(RITEH), Josip Stepanić, Ivan Stojanović, Vinko Šimunović, Johann Wilhelm Erning
(BAM), Angela Topić (FSR Mostar), Mato Pavlović (BAM Berlin).
ORGANIZING COMMITTEE:
Matija Sakoman (President), Tamara Aleksandrov Fabijanić, Antonio Ivanković, Dario
Iljkić, Suzana Jakovljević, Dragutin Juraj, Krešimir Kekez, Tomislav Kezele, Saša
Kovačić, Ivan Kumić, Marin Kurtela, Morana Mihaljević, Andrijana Milinović, Miroslav
Omelić, Tihomir Polanović, Marijana Serdar, Mateja Šnajdar Musa.
TECHNICAL COMMITTEE:
Ljiljana Pedišić (INA), Džo Mikulović (MESA Electronic GmbH), Roman Tomat (Schunk
Wien GmbH), Mladen Stupnišek (Feliks Metal), Zdravko Prošić (PRO-C.T.I.), Jerko Prlić
(Anton Paar Croatia), Marko Ebert (EBERT), Dario Karlovčan (Oprema pod tlakom
d.o.o.), Ante Dizdar (OPT d.o.o.), Marko Rakvin (TUV Croatia), Branko Šeparović
(Altmont), Zvonimir Ivković (ĐĐ TEP), Martin Miculinić (ZIT), Damir Pinotić (STSI),
Mladen Franjković (STSI), Karla Rončević (Helios), Ivana Radić Boršić (Cortec
Corporation Europe), Robert Iveković (IVEKOVIĆ-TZM).
TOPICS:
Materials and processes, Materials characterization, Nanomaterials and
nanotechnology, Metallurgy, Friction, wear and lubrication, Coatings, Advanced
surface modification and coating technologies, Vacuum heat treatment, Heat treating
equipment, Quenchants and quenching technology, Mathematical modelling and
process simulation of heat treatment, Corrosion, Corrosion protection methods,
Corrosion resistant materials, Non-destructive testing and evaluation, In-service
inspection, Certification and accreditation, Measurement and quality assurance.
Conference Chairman
Prof. dr. sc. Željko Alar
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
VENUE AND DATE:
MTECH International Conference will be held at Hotel Kolovare in Zadar, from 4-7 October, 2017. HOTEL KOLOVARE is located near historical sights of the ancient city of Zadar. City of Zadar is know as cultural, economic and administrative center of Northern Dalmatia.
LOCATION OF CONFERENCE HOTEL:
Hotel KOLOVARE is located at Bože
Peričića 14, 23 000 Zadar, Croatia
HOW TO REACH THE CONFERENCE HOTEL:
BY PLANE: The Zadar airport - Zemunik (ZAD) is very well connected to bigger towns of Croatia
and Europe and it is situated only 20 minutes by car far from Zadar.
BY CAR: You can come to Zadar from several directions and the highway A1, route Zagreb -
Split, is the quickest and best of all. The best exit from the highway is at the knot Zadar east or
Zadar west. If you are coming from Rijeka, you can take the Adria road - route D8.
BY FERRY: If you are coming from the direction of Italy, the shortest possible route is through
Ancona by ferry to Zadar.
BY BUS: Zadar is the centre of north Dalmatia and very well connected with other Croatian and
bigger European towns.
CONFERENCE HALLS:
A total of 4 conferece halls will be used for the purpose of the conference:
KOLOVARE Hall – Opening ceremony, Invited lectures, Gala Dinner
Meeting room 1 - Lectures
Meeting room 2 – Poster session, Coffee breaks, Sponsor exibition
Meeting room 3 - Lectures
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
DAY 0 – TUESDAY 3.10.2017.
20.00 h WELCOME RECEPTION for Workshop participants
By the pool area of Hotel Kolovare
DAY 1 – WEDNESDAY 4.10.2017.
10.00 h Workshops http://mtech.com.hr/workshops
Meeting room 1, 2, 3, KOLOVARE HALL
20.00 h WELCOME RECEPTION for Conference participants
By the pool area of Hotel Kolovare
DAY 2 – THURSDAY 5.10.2017.
8.30-9.00 h REGISTRATION DESK Hotel reception
9.00-9.20 h OPENING CEREMONY Kolovare HALL
9.20-10.30 h INVITED & COMMERCIAL LECTURES
Kolovare HALL
10.30-11.00 h COFFEE BREAK Meeting room 2
11.00-13.00 h LECTURES Meeting room 1 & 3
13.00-14.30 h LUNCH BREAK -
14.30-16.30 h LECTURES Meeting room 1 & 3
16.30-18.00 h POSTER SESSION, EXIBITION & COFFEE
Meeting room 2
19.00 h ZADAR CITY TOUR & WINERY ŠKAULJ
In front of Hotel Kolovare
DAY 3 – FRIDAY 6.10.2017.
9.00-10.30 h INVITED & COMMERCIAL LECTURES
Kolovare HALL
10.30-11.00 h COFFEE BREAK Meeting room 2
11.00-13.00 h LECTURES Meeting room 1 & 3
13.00-14.30 h LUNCH BREAK -
14.30-16.30 h LECTURES Meeting room 1 & 3
16.30-18.00 h POSTER SESSION, EXIBITION & COFFEE
Meeting room 2
20.00 h GALA DINNER Kolovare HALL
DAY 4 – SATURDAY 7.10.2017.
10.00h FULL DAY EXCURSION TO KORNATI NATIONAL PARK
In front of Hotel Kolovare
PROGRAMME OVERVIEW
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
DAY 2 – THURSDAY 5.10.2017.
TIME / EVENT / LOCATION
8.30-9.00 h REGISTRATION DESK Hotel reception
9.00-9.20 h OPENING CEREMONY Kolovare HALL
9.20-10.30 h INVITED & COMMERCIAL LECTURES
Kolovare HALL
INVITED LECTURE: Dr. rer. nat. Johann Wilhelm Erning
INVITED LECTURE: Dr. Imre Felde
COMMERCIAL LECTURE: Kontroltest International d.o.o.
10.30-11.00 h COFFEE BREAK Meeting room 2
11.00-13.00 h LECTURES Meeting room 1 & Meeting room 3
Meeting room 1
Smoljan, Božidar, Iljkić Dario, Smokvina Hanza Sunčana, Štic Lovro, Borić Andrej, Rubeša Domagoj: PREDICTION OF STEEL PROPERTIES DURING CONTROLLED COOLING OF STEEL HOT ROLLED BARS
Mandić Davor, Alar Željko: ANALYSIS OF COMPLIANCE FOR EVALUATION OF INSTRUMENTED IMPACT TEST DATA
Kladarić Ivica, Kladarić Slavica, Milinović Andrijana: NORMALIZACIJSKO ŽARENJE MARAGING ČELIKA
Matijević Božidar, Murilo Borges Masalskas, Lauralice de Campos Franceschini Canale: MECHANICAL PROPERTIES OF HOT WORK TOOL STEELS SUBMITTED TO HARDENING FROM DIFFERENT HEAT TREATMENT FURNACES
Jandrlić Ivan, Rešković Stoja, Lazić Ladislav, Alar Željko, Udiljak Toma, Brlić Tin: POSSIBILITY OF USING THERMOGRAPHY AND DIGITAL IMAGE CORRELATION FOR DETERMINATION OF STRESS AND STRAIN DISTRIBUTION IN DEFORMATION ZONE
Landek Darko, Alar Vesna, Kovačić Saša, Baršić Gorana: INFLUENCE OF SURFACE PREPARATION ON THE PROPERTIES OF A NITROCARBURIZED LAYER
Meeting room 3
Serdar Marijana, Bjegović Dubravka: PONAŠANJE BETONSKIH STUPOVA ARMIRANIH KOROZIJSKI OTPORNIM ČELIKOM U REALNOM MORSKOM OKOLIŠU
Šimunović Vinko, Juraga Ivan, Stojanović Ivan, Kurtela Marin, Klasnić Antonio: NAPETOSNA KOROZIJA NEHRĐAJUĆIH ČELIKA – ANALIZE SLUČAJEVA I MOGUĆNOSTI IZBJEGAVANJA
Rozing Goran, Alar Vesna, Heffer Goran, Vidaković Ivan: ISTRAŽIVANJE OTPORNOSTI MARTENZITNIH KOROZIJSKI POSTOJANIH ČELIKA U UVJETIMA KOMBINIRANOG TROŠENJA
Kekez Krešimir, Pažameta Dražen, Pavlek Mario: REHABILITACIJA SPREMNIKA TOPLINE „PAMETNOM“ KATODNOM ZAŠTITOM
Ivan Stojanović, Vesna Alar, Kurtela Marin, Ivanek Tomislav: UTJECAJ PARAMETARA ANODIZACIJE ALUMINIJA NA SVOJSTVA OKSIDNE PREVLAKE
Ivica Garašić, Zoran Kožuh, Ivan Jurić, Ivan Torer: PRIMJENA MAG CBT POSTUPKA ZA ADITIVNU PROIZVODNJU ELEKTRIČNIM LUKOM I ŽICOM
FULL PROGRAMME
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
DAY 2 – THURSDAY 5.10.2017.
TIME / EVENT / LOCATION
13.00-14.30 h LUNCH BREAK -
14.30-16.30 h LECTURES Meeting room 1 & Meeting room 3
Meeting room 1
Fajdiga Gorazd, Kovačič Aljaž, Šubic Barbara: ANALYSIS OF WOODEN BASED HYBRID BEAMS
Starčević Valnea, Opačak Ivan, Putnik Ivan, Grgić Ivan, Marušić Vlatko, Pecić Vladimir, Marić Dejan: SPECIFICAL PROPERTIES OF 13CRMO4-5 BOILER STEELS
Grgic Ivan, Putnik Ivan, Opacak Ivan, Starcevic Valnea, Ivandic Zeljko, Samardzic Ivan: EXPERIMENTAL AND NUMERICAL MODELING OF TENSILE AND BEND TESTING OF 13CrMo4-5 BOILER STEEL
Grilec Krešimir, Žmak Irena: DREVNI ŽELJEZNI MATERIJALI
Sakoman Matija, Ćorić Danko, Aleksandrov Fabijanić Tamara: EFFECTS OF Co CONTENT ON THE WC GRAIN SIZE AND HARDNESS OF CEMENTED CARBIDE
Meeting room 3
Marić Vjera, Stupičić Robert, Stojanović Ivan: UTJECAJ PRIPREME OŠTROG RUBA U SKLADU SA ZAHTJEVOM IMO MSC.215 (82)
Hudec Bojan, Martinez Sanja: KARAKTERIZACIJA ELEKTROKEMIJSKOG SENZORA ZA NADZOR STANJA ZAŠTITNIH PREMAZA U ZONI ZAPLJUSKIVANJA OD OBALNIH OBJEKATA
Grudić Veselinka, Knežević Bojana, Martinez Sanja: PRIRODNI MED KAO KOROZIJSKI INHIBITOR ZA UGLJIČNI ČELIK U OTOPINI KLORIDA
Kristan Mioč Ekatarina, Katić Vedrana, Otmačić Ćurković Helena: KOROZIJSKA ZAŠTITA SAMOORGANIZIRAJUĆIM FILMOVIMA ORGANSKIH KISELINA
Leutar Ivan, Jakopčić Mirko: DUGOROČNA ZAŠTITA SLOŽENIH TEHNIČKIH SUSTAVA PRIMJENOM ISPARAVAJUĆIH INHIBITORA KOROZIJE
Bavarian Behzad, Reiner Lisa, Samimi Babak, Miksic Boris, Rogan Ivan: UTJECAJ VELIČINE PRAŠKA HLAPLJIVIH INHIBITORA KOROZIJE NA EFIKASNOST INHIBITORA
16.30-18.00h POSTER SESSION, EXIBITION & COFFEE
Meeting room 2
Macura Vladimir, Aleksandrov Fabijanić Tamara, Alar Željko: ODREĐIVANJE MODULA ELASTIČNOSTI ČELIKA
Pisk Matija, Aleksandrov Fabijanić Tamara, Sakoman Matija: MJERITELJSKE KARAKTERISTIKE REFERENTNIH PLOČICA TVRDOĆE PO VICKERSU
Kalanj-Matković Eugen, Aleksandrov Fabijanić Tamara , Sakoman Matija: INSTRUMENTIRANA METODA UTISKIVANJA NA NANOSTRUKTURIRANIM TVRDIM METALIMA
Petruša Jelena, Žmak Irena: POLYMER COMPOSITES IN RACING MOTORCYCLE BODYWORK
19.00 h ZADAR CITY TOUR & WINERY ŠKAULJ
in front of Hotel Kolovare
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
DAY 3 – FRIDAY 6.10.2017.
TIME / EVENT / LOCATION
9.00-10.30 h INVITED & COMMERCIAL LECTURES
Kolovare HALL
INVITED LECTURE: Dr. Ing. Mato Pavlović
INVITED LECTURE: Prof.dr.sc. Dragutin Lisjak
COMMERCIAL LECTURE: Anton Paar Croatia d.o.o.
10.30-11.00 h COFFEE BREAK Meeting room 2
11.00-13.00 h LECTURES Meeting room 1 & Meeting room 3
Meeting room 1
Katić Marko, Šokac Mario, Budak Igor: PRIMJENA RAČUNALNE TOMOGRAFIJE KOD PROIZVODA OD RAZLIČITIH MATERIJALA
Sperling Philip: A NEW GENERATION OF X-RAY COMPUTED TOMOGRAPHY DEVICES FOR QUALITY ASSURANCE AND METROLOGY INSPECTION IN THE FIELD OF ADDITIVE MANUFACTURING AND OTHER SCIENCES Rakvin Marko, Perkušić Velimir, Markučič Damir, Kezele Tomislav: MJERENJE DEBLJINE STIJENKE CIJEVI MALOG PROMJERA
Mihaljević Morana, Markučič Damir: MJERENJE ULTRAZVUČNE BRZINE ETALONA V1 PREMA ZAHTJEVIMA NORME HRN EN ISO 2400
Omelić Miroslav, Korenjak Edgar: ISPITIVANJE ZAVARENIH SPOJEVA TERMOPLASTIČNIH MATERIJALA
Vukoja Matija, Markučič Damir, Mihaljević Morana: ANALYSIS OF THE STANDARD REQUIREMENTS FOR CHARACTERIZATION PROCEDURES FOR ULTRASONIC THICKNESS GAUGES
Meeting room 3
Topić Angela, Bauer B., Kožuh Z., Knezović N.: UTJECAJ ZAŠTITNOG PLINA NA KOROZIJSKU POSTOJANOST I GEOMETRIJU SPOJA KOD LASERSKOG ZAVARIVANJA DUPLEX ČELIKA
Obralić Ema, Ćatić Sead, Martinez Sanja: PRIMJENA ELEKTROHEMIJSKE IMPEDANCIJSKE SPREKTROSKOPIJE ZA OCJENU UČINKA POSTUPKA ČIŠĆENJA NEHRĐAJUĆEG ČELIKA
Strelar Ivan: ZAŠTITA IZMJENJIVAČA TOPLINE OD KOROZIJE
Majnarić Igor, Štukar Iva, Alar Vesna, Stojanović Ivan: MEHANIČKA POSTOJANOST CMYK UV INKJET PREMAZA IZVRŠENOG CROSS CUT METODOM UZ PRIMJENU SLIKOVNE ANALIZE
Stojanović Ivan, Juraj Dragutin: TOČNOST I POUZDANOST MJERENJA DEBLJINE ZAŠTITNIH PREMAZA NEDESTRUKTIVNIM METODAMA NA VRUĆE POCINČANIM ČELIČNIM PODLOGAMA
Primorac Ivan, Horvatić-Novak Amalija, Grilec Krešimir, Jakovljević Suzana: STRUCTURE ANALYSIS OF METAL FOAM USING CT DEVICE
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
DAY 3 – FRIDAY 6.10.2017.
TIME / EVENT / LOCATION
13.00-14.30 h LUNCH BREAK -
14.30-16.30 h LECTURES Meeting room 1 & Meeting room 3
Meeting room 1
Ayday Aysun: WEAR BEHAVIOR OF MICRO ARC OXIDATION COATINGS ON BIOMEDICAL Ti6AL4V ALLOY
Bogdanić Dino, Horvat Tomislav, Jačan Jurica, Landek Darko: UTJECAJ POSTUPAKA PREVLAČENJA NA INTEGRITET POVRŠINE TI6AL4V LEGURE Smolčić Juraj, Stepić Antonio, Kumić Ivan: IMPLANT'S SURFACE MORPHOLOGY AND ROUGHNESS INFLUENCE ON BONDING WITH BONE CEMENT Šaka Marko, Kumić Ivan: RESEARCH AND DEVELOPMENT OF PLASMA NITRIDING AND PACVD TREATMENTS IN THE REPUBLIC OF CROATIA Radas Patrik, Lubina Josip, Kovačić Saša, Landek Darko: UTJECAJ ORIJENTACIJE POVRŠINE ALATNOG ČELIKA ZA TOPLI RAD NA DEBLJINU I PRIONJIVOST PREVLAKE PACVD TIN Meeting room 3
Surma Robert, Godec Damir, Pilipovic Ana: 3D PRINTED PARTS REINFORCED WITH FIBERGLASS
Bratošević Mladen, Sabbioncello Bartul, Rožić Matija, Varšić Nevenko: RAZVOJ I IZRADA GUMENIH ODBOJNIKA ZA PROJEKT VRATA VENECIJE Čujić Iva, Aleksandrov Fabijanić Tamara, Kovačić Saša: INSTRUMENTIRANA METODA UTISKIVANJA PACVD PREVUČENIH NANOSTRUKTURIRANIH TVRDIH METALA Ormuž Jan Karl, Radonić Luka, Šnajdar Musa Mateja: KONSOLIDACIJA ALUMINIJA IZ PRAHA POMOĆU BP -ECAP METODE Juroš Ljerka, Pustički Danijel, Šnajdar Musa Mateja: ANALIZA UTJECAJA ECAP POSTUPKA NA MIKROSTRUKTURU ALUMINIJA Kesner Martina, Sakoman Matija, Ćorić Danko: GUSTOĆA I POROZITET NANOSTRUKTURIRANIH TVRDIH METALA KONSOLIDIRANIH POSTUPKOM TEORETSKE GUSTOĆE 16.30-18.00h POSTER SESSION,
EXIBITION & COFFEE Meeting room 2
Sambolek Anamarija, Majić Renjo Marijana, Majer Ozren: SILICONE ADHESION ON THE PLASMA TREATED PIEZO CERAMICS
Bašić Bojan, Rede Vera, Majić Renjo Marijana: UTJECAJ OPTEREĆENJA NA TVRDOĆU NISKOLEGIRANOG ČELIKA 39NiCrMo3
Stojanović Ivan, Ante Milić: VODORAZRJEDIVI PREMAZI S INHIBITOROM KOROZIJE
Korenjak Edgar, Omelić Miroslav: ISPITIVANJE ODLJEVAKA ULTRAZVUČNOM METODOM
Žukina Mihaela, Mihaljević Morana, Horvatić Novak Amalija: ULTRAZVUČNO MJERENJE DEBLJINE ZRAKOPLOVNIH PROZORA
20.00 h GALA DINNER Kolovare HALL
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
Dr. rer. nat. Johann Wilhelm Erning
Works at Bundesanstalt für Materialforschung und –prüfung (BAM), Berlin, Germany. Studied Chemistry in Cologne and Bonn. Worked for the research centre Jülich from 1993 – 1996. Worked as post-doc at South Westphalia University of Applied Sciences from 1996-1998. Currently working at Bundesanstalt für Materialforschung und –prüfung (BAM) since 1998. Topics: electrochemistry, metals in contact with drinking water, failure analysis. Participation in various committees at EFC, CEN, DIN, DVGW…
Prof.dr.sc. Dragutin Lisjak
Professor Dragutin Lisjak received his doctorate at the Faculty of Mechanical Engineering and Naval Architecture In Zagreb at the Department of Materials with the topic "Application of Artificial Intelligence Method in materials selection". For many years he has been dealing with materials selection problems and Material databases. He was a leader and participant in several scientific Projects related to the mentioned issue. Current areas of his interest are machine learning methods, evolutionary algorithms, multi-criteria decision-making and optimization business processes.
Dr. Imre Felde
Dr. Imre Felde was born 19.07.1973. in Hungary. He achieved his PhD in Materials Science and Technology from Miskolc University (Hungary) in 2007. From 1995. to 2008. he was head of department and from 2008 to 2012. CEO of Bay Zoltán Foundation for Applied Research, Budapest, Hungary. From 2012. he is Vice Dean of Faculty of Informatics , Obuda Univesity in Budapest, hungary. He has published more than 100 scientific and technical papers in field of engineering, computer science, mathemathics and process modeling. He is member of editorial board of Strojniski Vestnik-Journal of Mechanical Engineering, International Journal of Microstructure and Mechanical Properties, Surface Engineering and Hindawi Advanced Materials Science and Technology.
Dr. Ing. Mato Pavlović
Born in 1971, is a researcher with over 10 years of experience in the field of non-destructive testing, especially ultrasonic testing (UT), working at the BAM in Berlin, Germany. His current research interests include the theoretical modeling and simulation, and reliability analysis of UT systems. His work concentrates on the investigation of UT systems for the automated inspection of high-speed train axles. Furthermore, he looks into the advanced phased-array UT system used for the inspection of canisters for the permanent storage of spent nuclear fuel. He also worked for German Society for Non-destructive Testing (DGZfP) - Education and Training Ltd. as an NDT reliability advisor, developing guidelines for the reliability evaluation of NDT systems. Prior to joining BAM, he worked as a research and development engineer at Soko Z.I. developing a flight simulator. Mato Pavlovic has a degree (Dipl.-Ing) in Mechanical Engineering from the University of Zagreb, Croatia and a postgraduate degree (Dr.-Ing.) in Material Science from the University of Saarland, Germany.
INVITED LECTURERS
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
www.mtech.com.hr/workshops
WORKSHOP 1
APPLICATION OF CORROSION INHIBITORS FOR PROTECTION OF STRUCTURES AND FACILITIES IN
MARINE ENVIRONMENT
WORKSHOP 2
REQUIREMENTS FOR QUALITY ASSURANCE OF NDT TESTING RESULTS
WORKSHOP 3
SPECIFICITIES OF HEAT TREATMENT AND APPLICATION OF SURFACE ENGINEERING IN TOOL MAKING
WORKSHOP 4
ADVANCES IN THE FIELD OF MECHANICAL PROPERTIES TESTINGS, AND CALIBRATION OF THE
TESTING EQUIPMENT
WORKSHOP 5
METALLOGRAPHIC TECHNIQUES IN APPLICATION
WORKSHOPS
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
OFFICIAL LANGUAGES:
Official languages of the Conference are Croatian and English.
CONFERENCE BADGE:
Everyone is kindly requested to wear her/his name badge during the Conference as it
provides access to the scientific sessions, poster session, lunches, coffee breaks and
conference gala dinner.
LUNCHES AND COFFEE BREAKS:
Lunches will be served during the conference days at the hotel restaurant. Coffee breaks
will be served at the conference Meeting room II according to the program timetable.
TECHNICIANS SERVICE:
All speakers should check and upload their presentations at the Registration desk (in the
lobby of Kolovare Hotel) at the latest in the breaks just before the relevant session.
Technical support will be at your service during the opening hours of the Registration
desk.
DURATION OF PRESENTATION:
Due to the tight presentation schedule each participant selected for presentation is kindly
asked to present his work in 12 min. Additional 3 min is left for the discussion of each
presentation. All speakers are kindly asked to prepare the presentation in English in a
Power Point format and to save it on a USB memory device.
POSTER PRESENTATION:
Posters will be exhibited in the conference Meeting room II.
All authors participating at MTECH 2017 with posters have to print posters and bring
them to the conference. The Conference Secretariat will provide pins, glue tape and
assistance for posters set-up. Poster size should be 70 cm x 100 cm (that is width x height;
portrait format). Organizing Committee is unfortunately not able to offer a Poster Printing
Service.
REGISTRATION:
All participants at MTECH 2017 have to register via http://mtech.com.hr/registration.
1st August 2017 - preliminary program and early registration discount payment -10%
www.mtech.com.hr
INTERNATIONAL CONFERENCE ON MATERIALS
corrosion, heat treatment, testing and tribology, 2017
ZADAR CITY TOUR & WINERY ŠKAULJ:
Date and time: Thursday, 05th October, 19.00
For those eager to discover beauties of Zadar, a City Tour will be organized starting from Hotel
Kolovare. After the Tour a transfer via Coaches is planed to Winery Škaulj, where the traditional dinner
and tasting of rewarded wines will be held.
EXCURSION TO KORNATI NATIONAL PARK:
Date and time: Saturday, 07th October, 10.00
To make your stay in Zadar pleasant, we have planned an additional social event. Please consider
joining us during the full day excursion, which will start from the hotel reception, on Kornati National
Park. These islands are the most indented group of islands in the European Mediterranean of the most
exceptional landscape value which was given the status of a national park in 1980. More than three
quarters of the Park’s surface belong to the sea, whereas the land part consists of 89 islands, islets and
reefs in the total surface of 50 km2.
CONFERENCE WELCOME DRINK:
Date and time: Wednesday, 04th October, 20:00
Venue: Hotel Kolovare, Zadar, terrace
The Organizers invite all guests to enjoy a breathtaking panorama, together with the appropriate
welcome drink and snack in the pool area of the Hotel Kolovare.
Dress code: Casual
CONFERENCE GALA DINNER:
Date and time: Friday, 06th October, 20:00
Venue: Hotel Kolovare, Zadar
The Organizers welcome all participants to spend a charming evening on the terrace and in the
Kolovare Hall. The unique location, excellent cuisine, professional service and special care for details,
make the hotel Kolovare an ideal place for the conference banquet. Discover the romantic ambience
with the sounds of the traditional music and variety of uniques flavors which charm even the most
discerning guests!
Dress code: Formal
top related