msh 500/600 series multi-stage process pump · 2019-03-07 · msh 500/600 series multi-stage...
Post on 31-Jul-2020
10 Views
Preview:
TRANSCRIPT
Eagle Centrifugal Multi-Stage Pumps are designed to handle a wide variety of liquids ranging from light hydrocarbons to viscous crude oils with flow rates to 350 usgpm and pressures to 3500 psig.
The smooth, quiet centrifugal design has no reciprocating components to cause pulsation or knocking. Unlike conventional high pressure plunger pumps, the Eagle MSH series eliminates the need for pulsation dampening equipment or heavy concrete bases. A field changeable rotating assembly and industry standard ANSI dimension mechanical shaft seal chamber ensures minimum service downtime and reduced maintenance costs.
The MSH series is available in two configurations depending on flow and horsepower requirements. The MSH500 is the smaller more economical version designed for applications requiring up
MSH 500/600 SERIES MULTI-STAGE PROCESS PUMP
to 40 horsepower and flows to 175 usgpm. The larger MSH600 is designed for flows up to 350 usgpm and motor horsepower requirements up to 250 BHP.
CONSIDER THE EAGLE MSH SERIES MULTI-STAGE PUMPS
FOR YOUR NEXT HIGH PRESSURE APPLICATION.
MSH600 SERIES MULTI-STAGE PROCESS PUMP
Calgary, Alberta 7025-5 Street S.E. T2H 2G2
eagle-pc.com | info@eagle-pc.com
Phone: 403-253-0100 | Fax: 403-253-8884
FEATURES
Rapid delivery times
Lower initial cost compared to conventional plunger pump systems
Smooth, non-pulsing flow
Low maintenance design
Manufactured and inventoried in Calgary, Alberta
TYPICAL APPLICATIONS Waterflood
Amine Contactor Tower
Produced Water Disposal
LPG Transfer/Boost
Pipeline Feed
Inlet Separators
Frac Water Boosting
PERFORMANCE DATA
MSH500 MSH600
HP 10 – 40 50 – 250
Pressure (psig) 1650 3500
Flow (usgpm) 175 400
Speed (rpm) –––––– 1800 to 4300 ––––––
MECHANICAL SEALS
The MSH series seal chambers allow for a wide variety of seal options including tandem seal arrangements.
Seal Face Materials include: Carbon, Ceramic, Tungsten Carbide, Ni-Resist, Silicon carbide
Secondary Seal (Elastomers): Buna, Viton, AFLAS, Teflon
MATERIALS
Outer Casing Coated Carbon Steel
Impeller case (Diffuser) Ni-Resist
Impellers Ni-Resist
Impeller shaft Monel
Bearing frame shaft (MSH500) 4140 Steel with 316SS Sleeve
Bearing frame shaft (MSH600) H1150 Stainless
Bearing frame case Cast Iron & Carbon Steel
Connections ASTM A105 Steel raised Face Flanges
Base Fabricated Structural Steel
MSH500 SERIESMULTI-STAGE PROCESS PUMP
top related