Eagle Centrifugal Multi-Stage Pumps are designed to handle a wide variety of liquids ranging from light hydrocarbons to viscous crude oils with flow rates to 350 usgpm and pressures to 3500 psig.

The smooth, quiet centrifugal design has no reciprocating components to cause pulsation or knocking. Unlike conventional high pressure plunger pumps, the Eagle MSH series eliminates the need for pulsation dampening equipment or heavy concrete bases. A field changeable rotating assembly and industry standard ANSI dimension mechanical shaft seal chamber ensures minimum service downtime and reduced maintenance costs.

The MSH series is available in two configurations depending on flow and horsepower requirements. The MSH500 is the smaller more economical version designed for applications requiring up

MSH 500/600 SERIES MULTI-STAGE PROCESS PUMP

to 40 horsepower and flows to 175 usgpm. The larger MSH600 is designed for flows up to 350 usgpm and motor horsepower requirements up to 250 BHP.

CONSIDER THE EAGLE MSH SERIES MULTI-STAGE PUMPS

FOR YOUR NEXT HIGH PRESSURE APPLICATION.

MSH600 SERIES MULTI-STAGE PROCESS PUMP

Calgary, Alberta 7025-5 Street S.E. T2H 2G2

eagle-pc.com | info@eagle-pc.com

Phone: 403-253-0100 | Fax: 403-253-8884

FEATURES

Rapid delivery times

Lower initial cost compared to conventional plunger pump systems

Smooth, non-pulsing flow

Low maintenance design

Manufactured and inventoried in Calgary, Alberta

TYPICAL APPLICATIONS Waterflood

Amine Contactor Tower

Produced Water Disposal

LPG Transfer/Boost

Pipeline Feed

Inlet Separators

Frac Water Boosting

PERFORMANCE DATA

MSH500 MSH600

HP 10 – 40 50 – 250

Pressure (psig) 1650 3500

Flow (usgpm) 175 400

Speed (rpm) –––––– 1800 to 4300 ––––––

MECHANICAL SEALS

The MSH series seal chambers allow for a wide variety of seal options including tandem seal arrangements.

Seal Face Materials include: Carbon, Ceramic, Tungsten Carbide, Ni-Resist, Silicon carbide

Secondary Seal (Elastomers): Buna, Viton, AFLAS, Teflon

MATERIALS

Outer Casing Coated Carbon Steel

Impeller case (Diffuser) Ni-Resist

Impellers Ni-Resist

Impeller shaft Monel

Bearing frame shaft (MSH500) 4140 Steel with 316SS Sleeve

Bearing frame shaft (MSH600) H1150 Stainless

Bearing frame case Cast Iron & Carbon Steel

Connections ASTM A105 Steel raised Face Flanges

Base Fabricated Structural Steel

MSH500 SERIESMULTI-STAGE PROCESS PUMP