model: pkucg2x - microsoftmodel: pkucg2x chrysler 2nd gen and gm passkey 3+ type rf transponder...
Post on 17-Mar-2020
7 Views
Preview:
TRANSCRIPT
INSTALLATION GUIDE
MODEL: PKUCG2XCHRYSLER 2ND GEN AND GM PASSKEY 3+ TYPE RF TRANSPONDER BYPASS
PRODUCT FEATURESGM:Cover all new GM equipped with the GM PASS- Key III PlusChrysler:Built in MUX Wire (2nd start & 2nd accessory) activation output to streamline installationActivates Chrysler starter low circuit (MUX) required on most late model Chrysler & Dodge vehicles
- Compatible with any remote car starter- Compatible with manufacturer’s anti-theft & content theft security system- Maintains integrity of manufacturer’s anti-theft immobilizer system- No extra key required for operation- Easy programming
PRODUCT DESCRIPTIONGM PASS- Key III Plus, bypass for vehicles equipped with the new style hybrid Passlock (resistance) and Passkey 3+ (transponder) type anti-theft system.
Chrysler transponder bypass kit for all 2nd generation encrypted Sentry key immobilizer. The PKUCG2X also features an extra output designed to activate the Chrysler MUX circuit. Compatible with the CHWFR for 2008+ Chrysler vehicles equipped with laser style key.
transponder
PK
BYPASS
† Buick, Cadillac, Chrysler, Chevrolet, Jeep, Suzuki, Saturn, Mitsubishi, Dodge, GM, Pontiac and Hummer are registered trademarks and property of their respective companies.
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
2008 2007 2006 2005 2004 2003
Enclave D
D D D
D
Lucerne
CTS
DTS D
D
D
D
DD D
D
D
D
D
D
Escalade
SRX
Avalanche
CobaltEquinox
D
ExpressVan D
HHR D D D
Impala D D D
Malibu D D D D
MalibuMAXX D D D D
MonteCarlo D D
Silverado D D
Suburban D D
Tahoe D D
300/300c C A / B
A / B A / B
A / B A / B A / B A / B A / B A / B
A A
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / B
A / BA / B
A / B A / B
A / BA / BA / BA / B
A / B
A / B A / B
A / B
A / B
A / B A / B
A / BA / B
A / BA / BA / B
A / BA / B
B B B A A
A / BA / B
A / B
A / B
B
B
B
B A A A
A / BA / B
A / B
A / B
Aspen
Pacifica
PTCruiser
SebringConvertible
SebringSedan
Town&Country C
Avenger
Caliber
Caravan C
Charger C
Dakota
Durango
GrandCaravan C
Magnum C
Nitro
RAM
2008 2007 2006
Acadia D D
Savana D
Sierra D D
Yukon D
D
D
H2
Commander
Compass
GrandCherokee C
GrandCherokeeLimited C
Liberty
Patriot
Wrangler
WranglerUnlimited
Raider
G5 D D
G6 D D
Pursuit D D
Solstice D D
Torrent D D
Aura D D
Outlook D D
Sky D D
VUE D
XL7 D D
A / B A / B
A / B
A / B
A / B
2005
D
D
D
D
Because the vehicles, note that there are 4 different wiring diagrams. The chart below will tell you by vehicle which wiring diagram to use.
PKUCG2X is compatible with a large number of
VEHICLE COMPATIBILITY CHART AND INSTALLATION TYPEPage 1 to 8
Buick
Cadillac
Chevrolet
Chrysler
Dodge
Suzuki
Saturn
Pontiac
Mitsubishi
Jeep
Hummer
GMC
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
Re
d
Gre
en
Blu
e
Vio
let
Bla
ck
Vio
let/
Wh
ite
Pin
k
Pin
k/W
hite
B
row
n
Ora
ng
e
10 PIN HARNESS
(-)
To G
round W
hen
Runnin
g O
utp
ut (s
tatu
s)
Gro
und
Batt +
12v
Input
Input
Input
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
or Alarm System
Remote Control
WIR
E G
UID
E:
CO
NN
EC
TIO
NS
To
pro
gra
m t
he m
od
ule
, see p
ag
e 7
Secti
on
B
Se
cti
on
C
INSTALL “A”: CHRYSLER 2ND GENERATION TRANSPONDER without OEM ALARM ONLY
Se
cti
on
A-
3 o
r 5 t
urn
s of
loop a
re r
eq
uire
d.
- Y
ou c
an p
rogra
m t
he t
ran
spo
nd
er
on
ly o
nce
.-
Do n
ot
inst
all
on m
eta
l su
rfa
ce.
10 P
IN H
AR
NE
SS
(-)
/
(+)
I/O
S
TA
TU
SW
IRE
CO
LO
R S
PE
CIF
IC W
IRE
CO
NN
EC
TIO
N L
OC
AT
ION
Co
nn
ect
Lo
cati
on
C
onsta
nt (+
) 12 V
olt S
ourc
e
Chassis
Gro
und
Leg
en
d:
R
CS
= R
em
ote
Co
ntr
ol S
yste
m N
/C =
N
o C
on
necti
on
N
/A =
No
t A
pp
licab
le
Bro
wn
RC
S
Red
Input
Input (+
)
Vehic
le
Bla
ck
Input
(-)
V
ehic
le
PIN
#
1 9 10
(-)
FU
NC
TIO
NS
Gro
un
d o
ut
wh
en
ru
nn
ing
(st
atu
s) f
rom
re
mo
te s
tart
er
Turn
ON
module
Pow
er
Sourc
e
Gro
und S
ourc
e
+1
2V
DC
Page 2 to 8
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
Re
d
Blu
e
Bla
ck
Bro
wn
Ora
ng
e
10 PIN HARNESS
(-)
To G
round W
hen
Runnin
g O
utp
ut (s
tatu
s)
Gro
und
Batt +
12v
Input
Input
Input
N/C
N/C
or Alarm System
Remote Control
WIR
E G
UID
E:
CO
NN
EC
TIO
NS
Secti
on
B
Secti
on
C
Se
cti
on
A-
3 o
r 5 turn
s of lo
op a
re r
equired.
- Y
ou c
an p
rogra
m the tra
nsp
onde
r only
once
.-
Do n
ot in
stall
on m
eta
l surf
ace
.
10 P
IN H
AR
NE
SS
Cu
t W
ire
Vio
let/
Bro
wn
*So
me v
eh
icle
do
no
t h
ave S
tart
er
wir
e
Gre
en
(+
) S
tart
er
Input
Vio
let
Vio
let/
Wh
ite
Pin
k
Pin
k/W
hite
MU
X to V
iole
t/B
row
n B
CM
sid
e
MU
X to V
iole
t/B
row
n K
EY
sid
e
Igniti
on in
+
Dis
arm
in -
N/A
N/A
Input
Input
(-)
/(+
) I/O
S
TA
TU
SW
IRE
CO
LO
R S
PE
CIF
IC W
IRE
CO
NN
EC
TIO
N L
OC
AT
ION
Co
nn
ect
Lo
cati
on
C
onst
ant (+
) 12 V
olt
Sourc
e
Chass
is G
round
Leg
en
d:
R
CS
= R
em
ote
Co
ntr
ol S
yste
m N
/C =
N
o C
on
necti
on
N
/A =
No
t A
pp
licab
le
Gre
en
Bro
wn
RC
S
Vio
let/W
hite
Vio
let
Red Input
Input
(+)
V
ehic
le
Bla
ck In
put
(-)
V
ehic
le
Pin
k/W
hite
Pin
k
PIN 1 2 4 5 6 7 9 10
(-)
FU
NC
TIO
NS
Gro
un
d o
ut
wh
en
ru
nn
ing
(st
atu
s) f
rom
re
mo
te s
tart
er
Turn
ON
module
Pow
er
Sourc
e
Gro
und S
ourc
e
Sta
rte
r O
utp
ut
fro
m r
em
ote
sta
rte
r (R
CS
)
Co
nn
ect
to
MU
X w
ire
, o
n B
CM
sid
e (
Vio
let/
Bro
wn
)S
tart
er/
2n
d S
tart
& A
cce
sso
ry (
Re
sist
an
ce)
Act
iva
tion
Sta
rte
r/2
nd
Sta
rt &
Acc
ess
ory
(R
esi
sta
nce
) A
ctiv
atio
nC
on
ne
ct t
o M
UX
wire
, o
n K
EY
sid
e (
Vio
let/
Bro
wn
)D
isa
rm O
utp
ut
rem
ote
sta
rte
r (R
CS
)
Ign
itio
n O
utp
ut
rem
ote
sta
rte
r (R
CS
)
N/A
N/A
N/A
N/A
Vehic
le
Vehic
le
Dis
arm
Fa
cto
ry A
larm
RC
S
Input
(-)
Act
iva
te I
gn
itio
nIn
put
(+)
RC
S
Se
con
d S
tart
Act
iva
tion
Input
(+)
Vehic
le
INSTALL “B”: CHRYSLER 2ND GENERATION TRANSPONDER with OEM ALARM and Multiplex ignition
+1
2V
DC
Page 3 to 8
To
pro
gra
m t
he
m
od
ule
, s
ee
pa
ge
7
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
INSTALL “C”: FOR CHRYSLER & DODGE & JEEP 2008 VEHICLES
10 PIN HARNESS
Se
cti
on
A
- 3 o
r 5 t
urn
s of
loop a
re r
equ
ire
d.
- Y
ou c
an p
rogra
m t
he t
ransp
ond
er
on
ly o
nce
.-
Do n
ot
inst
all
on m
eta
l surf
ace
.
Re
d
Gre
en
Blu
e
Vio
let
Bla
ck
Vio
let/
Wh
ite
Pin
k
Pin
k/W
hite
Bro
wn
Ora
ng
e
Gro
und
Batt 1
2v
+
Input
Input
Input
Input
Outp
ut
Outp
ut
Input
Sta
rter
in +
Igniti
on O
ut +
Igniti
on
Acc
ess
ory
N/C
N/C
N/C
(+)
(-)
(-)
N/C
N/C
N/C
(+)
(+)
(+)
(+)
(-)
To G
round W
hen R
unnin
g O
utp
ut (s
tatu
s)
+1
2V
DC
or Alarm System
Remote Control
Whi
te
Blu
e
Bla
ck
Red
See n
ext
page f
or
inst
alli
ng
inst
ruct
ion o
f th
e K
ey
Inte
rface
m
odule
into
key
barr
el.
Page 4 to 8
*C
HW
FR
is
not
inclu
ded
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
STEP 5
STEP 4STEP 1 STEP 2
Remove the wireless ignition node from the
dashboard. (Disassemble the dash to access the
ignition barrel)
STEP 8
STEP 6 STEP 7
Slide open the cover of the wireless ignition node.
Cut the lip off the cover.
Insert the CHWFR circuit board as shown.
Ensure the board is well aligned.
CHWFR circuit
Align the circuit board with the 6 pins on the wireless ignition node.
CHWFR
Using supplied screw ONLY, apply LOCTITE to screw and secure* wafer into PCB as per
diagram. Reassemble key module and install back into the vehicle.
* Be sure not to over tighten the screw as damage to the factory circuit board may occur.
Use a flat screw driver to lift out the 2 tabs on each side of the cover.
STEP 3
Install key interface into wireless ignition node
(-) /(+)
I/O STATUS
WIRECOLOR
SPECIFIC WIRE CONNECTION LOCATIONConnectLocation
Constant (+) 12 Volt Source Chassis Ground
Legend: RCS = Remote Control System N/C = No Connection N/A = Not Applicable
Blue
Green
Brown RCS
Orange
Red Input
Input
(+) Vehicle
Black Input (-) Vehicle
Pink
PIN
#
1
2
3
7
8
9
10
(-)
FUNCTIONS
Power Source
Ground Source
Connect to (-) When Running (status), output of RCS
Activate the module .Remote Starter Interface
Input (+) RCS Connect to Starter wire at Remote Starter or CHWFR Starter input +
Vehicle Output (+) Connect to PIN 1 at ignition barrel (See FIG.: 2) Ignition output
RCS Input (+) Connect to ignition wire at Remote Starter or CHWFR Ignition input
Vehicle Output (+) Connect to PIN 2 at ignition barrel (See FIG.: 2) Accessory output
WIRE GUIDE: CONNECTIONS Section B
10 PIN HARNESS
Page 5 to 8
Section C
To program the module, see page 7
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
IGN
ON
OF
F
Turn the key off and remove the key.Remove the brown wire from ground and connect to (-) ground when running (status) output from remote starter.
Section C
The PKUCG2X is compatible with 2004 Dodge Durango. However, all Durango’s built prior to 5 / 17 / 2004 must get a WCM module upgrade wich will correct a problem preventing the vehicle from learning additional keys. Chrysler is correcting this issue only when a Durango owner requests a new transponder key. The PKUCG2X must be programmed as would an additional key. The WCM replacement part number is 56038675AS.
A) P ound the vehicle's ignition cylinder as shown.
B) Plug the 2 pin loop antenna ring connector into the 2 pin connector of the module.
lace the loop antenna ring arNoteMove antenna loop as close to the front of the ignition cylinder (factory receiver ring) as possible.
IGN
IGN
IGN
IGN
IGN
ON
ON
ON
ON
ON
OF
FO
FF
OF
FO
FF
OF
F
KEY#1
KEY#1
KEY#2
KEY#2
Insert the first valid key into the ignition switch and turn it ON for at least 5 seconds, but no longer than 15 seconds.
Turn the ignition switch OFF and remove the first key.
Within 5 seconds insert the second valid key and turn the ignition switch ON.
After 10 seconds a chime will sound and the security light will begin to flash. Turn the ignition switch OFF and remove the second key.
Security
2
3
4
5
6
7
8
1
Remove cover and PC board from factory remote
*Remove the screw immediatly on the back of factory remote as shown on illustration at step 6
Within 20 seconds from step 5, jump the brown wire (ground when running output (-) status) of the PKUCG2X to ground.
Programming is now completed. You can close the remote and re-install the screw.
To groundBrown
9
For Durango 2004 built before 17/05/04
PROGRAMMING MODE FOR CODED CHRYSLER
KEY with INTEGRATED REMOTE
*You will need 2 valid keys
Page 6 to 8
Then, insert key (with the PC board removed) to the ignition position for a period of 10 sec, you will hear a chime, the light will turn on for 3 sec. Keep the key at this position for 5 sec.
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
87
87A
30
8685
RelayR
ed
Gre
en
Blu
e
Vio
let
Bla
ck
Vio
let/
Wh
ite
Pin
k
Pin
k/W
hite
B
row
n
Ora
ng
e
10 PIN HARNESS
(-)
To G
round W
hen R
unnin
g O
utp
ut (s
tatu
s)
Gro
und
Batt +
12v
Input
Input
Input
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
N/C
Ignition (See next page for wire color)
+12v Constant
Accessory (See next page for wire color)
5V Reference (See next page for wire color)
+12v constant
fused
Cut
RCS
INSTALL “D”GM VEHICLES EQUIPPED WITH THE GM PASS-KEY III PLUS
Se
cti
on
A
- 3 o
r 5 turn
s of lo
op a
re r
equired.
- Y
ou c
an p
rogra
m the tra
nsp
onder
only
once
.-
Do n
ot in
stall
on m
eta
l surf
ace
.
9.6
K
Re
sist
or
2n
d a
cc.
Acc
ess
ory
Ign
itio
n
+S
tart
er
Ground out (-) status
6.3
K
Re
sist
or
BC
M
+1
2V
DC
The R
esi
stor
code w
ire s
how
s 12V
for
key
sense
, 5V
during a
ccess
ory
and ig
niti
on, and ju
st u
nder
4V
during
crank.
This
is d
ue to the ig
niti
on s
witc
h s
hort
ing a
1300 o
hm
resi
stor
betw
een the R
esi
stor
code &
the 5
v R
efe
rence w
ires.
This
dia
gra
m k
eeps
the v
ehic
le fro
m s
ettin
g o
ff c
odes.
Alth
ough these
codes
do n
ot bring u
p
any
lights
on th
e d
ash
they
are
stil
l sto
red in
to th
e c
om
pute
r of th
e v
ehic
le. If a
deale
r hooks
up a
sca
n tool t
hey
will
see this
and w
ill b
e a
ble
to b
lam
e it
on the r
em
ote
sta
rt. F
or
trouble
shootin
g a
vehic
le that use
s th
is d
iagra
m
that w
ill n
ot re
mote
sta
rt the v
ehic
le w
ould
only
require b
ypass
, ig
niti
on &
acc
ess
ory
, and tach
to c
rank
the
vehic
le a
nd s
tart
. M
ake
sure
you h
ave
the ig
niti
on, and test
the tach
sourc
e. D
o n
ot tr
y to
rem
ote
sta
rt w
ithout
wirin
g this
dia
gra
m o
r th
ose
codes
will
be s
tore
d in
to the v
ehic
les
com
pute
r.
Page 7 to 8
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
(-) /(+)
I/O STATUS
WIRECOLOR
SPECIFIC WIRE CONNECTION LOCATIONConnectLocation
WIRE GUIDE: CONNECTIONS 10 PIN HARNESS
Constant (+) 12 Volt Source Chassis Ground
Legend: RCS = Remote Control System N/C = No Connection N/A = Not Applicable
Brown RCS
Red Input
Input
(+) Vehicle
Black Input (-) Vehicle
PIN
#
1
9
10
Section B
(-)
FUNCTIONS
Ground out when running (status) from remote starter Turn ON module
Power Source
Ground Source
1- Insert key and turn to “ON” position.2- Turn “OFF” and remove.3- Within 10 seconds, remote start the vehicle.Module is now programmed.
TRANSPONDER PROGRAMMING
Section C
Vehicle Wiring Reference Chart
Model Year
Resistor
Code
Voltage
Reference Ignition
Enclave 2008 White White/Black Pink Lucerne 2006-2008 White White/Black Pink
CTS 2008 White White/Black PinkDTS 2006-2007 White White/Black Pink
Escalade 2007-2008 Pink/Black White PinkSRX 2007-2008 White White/Black Pink
Avalanche 2007-2008 Pink/Black White Pink
Cobalt 2006-2008 White White/Black YellowEquinox 2007-2008 White White/Black Pink
Express Van 2008 Pink White Pink HHR 2006-2008 White White/Black Yellow
Impala 2006-2008 White White/Black Pink Malibu 2004-2008 White White/Black Pink
Monte Carlo 2006-2007 White White/Black Pink Silverado 2007-2008 Pink/Black White Pink Suburban 2007-2008 Pink/Black White Pink
Tahoe 2007-2008 Pink/Black White Pink
Acadia 2007-2008 White White/Black Pink
Savana Van 2008 Pink White PinkSierra 2007-2008 Pink/Black White Pink
Yukon 2007-2008 Pink/Black White Pink
H2 2008 Pink/Black White Pink
G5 2007-2008 White White/Black Yellow
G6 2005-2008 White White/Black PinkPursuit G5 2006-2008 White White/Black Yellow
Solstice 2006-2008 White White/Black YellowTorrent 2007-2008 White White/Black Pink
Aura 2007-2008 White White/Black PinkOutlook 2007-2008 White White/Black PinkSky 2007-2008 White White/Black Yellow
VUE 2008 White White/Black Pink
XL7 2007-2008 White White/Black Pink
Buick
Cadillac
Chevrolet
GMC
Suzuki
HUMMER
Pontiac
Saturn
Page 8 to 8
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
LIMITED ONE-YEAR CONSUMER WARRANTY
For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.
This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.
TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06
PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2 , 4 1 5 , 0 1 1 ; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA
This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.
MODEL: pkucg2xRev.: 20091028
© 2008 Directed Electronics. All rights reserved.
top related