model: pkucg2x - microsoftmodel: pkucg2x chrysler 2nd gen and gm passkey 3+ type rf transponder...

INSTALLATION GUIDE

MODEL: PKUCG2XCHRYSLER 2ND GEN AND GM PASSKEY 3+ TYPE RF TRANSPONDER BYPASS

PRODUCT FEATURESGM:Cover all new GM equipped with the GM PASS- Key III PlusChrysler:Built in MUX Wire (2nd start & 2nd accessory) activation output to streamline installationActivates Chrysler starter low circuit (MUX) required on most late model Chrysler & Dodge vehicles

- Compatible with any remote car starter- Compatible with manufacturer’s anti-theft & content theft security system- Maintains integrity of manufacturer’s anti-theft immobilizer system- No extra key required for operation- Easy programming

PRODUCT DESCRIPTIONGM PASS- Key III Plus, bypass for vehicles equipped with the new style hybrid Passlock (resistance) and Passkey 3+ (transponder) type anti-theft system.

Chrysler transponder bypass kit for all 2nd generation encrypted Sentry key immobilizer. The PKUCG2X also features an extra output designed to activate the Chrysler MUX circuit. Compatible with the CHWFR for 2008+ Chrysler vehicles equipped with laser style key.

transponder

PK

BYPASS

† Buick, Cadillac, Chrysler, Chevrolet, Jeep, Suzuki, Saturn, Mitsubishi, Dodge, GM, Pontiac and Hummer are registered trademarks and property of their respective companies.

MODEL: pkucg2xRev.: 20091028

© 2008 Directed Electronics. All rights reserved.

2008 2007 2006 2005 2004 2003

Enclave D

D D D

D

Lucerne

CTS

DTS D

D

D

D

DD D

D

D

D

D

D

Escalade

SRX

Avalanche

CobaltEquinox

D

ExpressVan D

HHR D D D

Impala D D D

Malibu D D D D

MalibuMAXX D D D D

MonteCarlo D D

Silverado D D

Suburban D D

Tahoe D D

300/300c C A / B

A / B A / B

A / B A / B A / B A / B A / B A / B

A A

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / B

A / BA / B

A / B A / B

A / BA / BA / BA / B

A / B

A / B A / B

A / B

A / B

A / B A / B

A / BA / B

A / BA / BA / B

A / BA / B

B B B A A

A / BA / B

A / B

A / B

B

B

B

B A A A

A / BA / B

A / B

A / B

Aspen

Pacifica

PTCruiser

SebringConvertible

SebringSedan

Town&Country C

Avenger

Caliber

Caravan C

Charger C

Dakota

Durango

GrandCaravan C

Magnum C

Nitro

RAM

2008 2007 2006

Acadia D D

Savana D

Sierra D D

Yukon D

D

D

H2

Commander

Compass

GrandCherokee C

GrandCherokeeLimited C

Liberty

Patriot

Wrangler

WranglerUnlimited

Raider

G5 D D

G6 D D

Pursuit D D

Solstice D D

Torrent D D

Aura D D

Outlook D D

Sky D D

VUE D

XL7 D D

A / B A / B

A / B

A / B

A / B

2005

D

D

D

D

Because the vehicles, note that there are 4 different wiring diagrams. The chart below will tell you by vehicle which wiring diagram to use.

PKUCG2X is compatible with a large number of

VEHICLE COMPATIBILITY CHART AND INSTALLATION TYPEPage 1 to 8

Buick

Cadillac

Chevrolet

Chrysler

Dodge

Suzuki

Saturn

Pontiac

Mitsubishi

Jeep

Hummer

GMC



Re

d

Gre

en

Blu

e

Vio

let

Bla

ck

Vio

let/

Wh

ite

Pin

k

Pin

k/W

hite

B

row

n

Ora

ng

e

10 PIN HARNESS

(-)

To G

round W

hen

Runnin

g O

utp

ut (s

tatu

s)

Gro

und

Batt +

12v

Input

Input

Input

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

or Alarm System

Remote Control

WIR

E G

UID

E:

CO

NN

EC

TIO

NS

To

pro

gra

m t

he m

od

ule

, see p

ag

e 7

Secti

on

B

Se

cti

on

C

INSTALL “A”: CHRYSLER 2ND GENERATION TRANSPONDER without OEM ALARM ONLY

Se

cti

on

A-

3 o

r 5 t

urn

s of

loop a

re r

eq

uire

d.

- Y

ou c

an p

rogra

m t

he t

ran

spo

nd

er

on

ly o

nce

.-

Do n

ot

inst

all

on m

eta

l su

rfa

ce.

10 P

IN H

AR

NE

SS

(-)

/

(+)

I/O

S

TA

TU

SW

IRE

CO

LO

R S

PE

CIF

IC W

IRE

CO

NN

EC

TIO

N L

OC

AT

ION

Co

nn

ect

Lo

cati

on

C

onsta

nt (+

) 12 V

olt S

ourc

e

Chassis

Gro

und

Leg

en

d:

R

CS

= R

em

ote

Co

ntr

ol S

yste

m N

/C =

N

o C

on

necti

on

N

/A =

No

t A

pp

licab

le

Bro

wn

RC

S

Red

Input

Input (+

)

Vehic

le

Bla

ck

Input

(-)

V

ehic

le

PIN

#

1 9 10

(-)

FU

NC

TIO

NS

Gro

un

d o

ut

wh

en

ru

nn

ing

(st

atu

s) f

rom

re

mo

te s

tart

er

Turn

ON

module

Pow

er

Sourc

e

Gro

und S

ourc

e

+1

2V

DC

Page 2 to 8



Re

d

Blu

e

Bla

ck

Bro

wn

Ora

ng

e

10 PIN HARNESS

(-)

To G

round W

hen

Runnin

g O

utp

ut (s

tatu

s)

Gro

und

Batt +

12v

Input

Input

Input

N/C

N/C

or Alarm System

Remote Control

WIR

E G

UID

E:

CO

NN

EC

TIO

NS

Secti

on

B

Secti

on

C

Se

cti

on

A-

3 o

r 5 turn

s of lo

op a

re r

equired.

- Y

ou c

an p

rogra

m the tra

nsp

onde

r only

once

.-

Do n

ot in

stall

on m

eta

l surf

ace

.

10 P

IN H

AR

NE

SS

Cu

t W

ire

Vio

let/

Bro

wn

*So

me v

eh

icle

do

no

t h

ave S

tart

er

wir

e

Gre

en

(+

) S

tart

er

Input

Vio

let

Vio

let/

Wh

ite

Pin

k

Pin

k/W

hite

MU

X to V

iole

t/B

row

n B

CM

sid

e

MU

X to V

iole

t/B

row

n K

EY

sid

e

Igniti

on in

+

Dis

arm

in -

N/A

N/A

Input

Input

(-)

/(+

) I/O

S

TA

TU

SW

IRE

CO

LO

R S

PE

CIF

IC W

IRE

CO

NN

EC

TIO

N L

OC

AT

ION

Co

nn

ect

Lo

cati

on

C

onst

ant (+

) 12 V

olt

Sourc

e

Chass

is G

round

Leg

en

d:

R

CS

= R

em

ote

Co

ntr

ol S

yste

m N

/C =

N

o C

on

necti

on

N

/A =

No

t A

pp

licab

le

Gre

en

Bro

wn

RC

S

Vio

let/W

hite

Vio

let

Red Input

Input

(+)

V

ehic

le

Bla

ck In

put

(-)

V

ehic

le

Pin

k/W

hite

Pin

k

PIN 1 2 4 5 6 7 9 10

(-)

FU

NC

TIO

NS

Gro

un

d o

ut

wh

en

ru

nn

ing

(st

atu

s) f

rom

re

mo

te s

tart

er

Turn

ON

module

Pow

er

Sourc

e

Gro

und S

ourc

e

Sta

rte

r O

utp

ut

fro

m r

em

ote

sta

rte

r (R

CS

)

Co

nn

ect

to

MU

X w

ire

, o

n B

CM

sid

e (

Vio

let/

Bro

wn

)S

tart

er/

2n

d S

tart

& A

cce

sso

ry (

Re

sist

an

ce)

Act

iva

tion

Sta

rte

r/2

nd

Sta

rt &

Acc

ess

ory

(R

esi

sta

nce

) A

ctiv

atio

nC

on

ne

ct t

o M

UX

wire

, o

n K

EY

sid

e (

Vio

let/

Bro

wn

)D

isa

rm O

utp

ut

rem

ote

sta

rte

r (R

CS

)

Ign

itio

n O

utp

ut

rem

ote

sta

rte

r (R

CS

)

N/A

N/A

N/A

N/A

Vehic

le

Vehic

le

Dis

arm

Fa

cto

ry A

larm

RC

S

Input

(-)

Act

iva

te I

gn

itio

nIn

put

(+)

RC

S

Se

con

d S

tart

Act

iva

tion

Input

(+)

Vehic

le

INSTALL “B”: CHRYSLER 2ND GENERATION TRANSPONDER with OEM ALARM and Multiplex ignition

+1

2V

DC

Page 3 to 8

To

pro

gra

m t

he

m

od

ule

, s

ee

pa

ge

7



INSTALL “C”: FOR CHRYSLER & DODGE & JEEP 2008 VEHICLES

10 PIN HARNESS

Se

cti

on

A

- 3 o

r 5 t

urn

s of

loop a

re r

equ

ire

d.

- Y

ou c

an p

rogra

m t

he t

ransp

ond

er

on

ly o

nce

.-

Do n

ot

inst

all

on m

eta

l surf

ace

.

Re

d

Gre

en

Blu

e

Vio

let

Bla

ck

Vio

let/

Wh

ite

Pin

k

Pin

k/W

hite

Bro

wn

Ora

ng

e

Gro

und

Batt 1

2v

+

Input

Input

Input

Input

Outp

ut

Outp

ut

Input

Sta

rter

in +

Igniti

on O

ut +

Igniti

on

Acc

ess

ory

N/C

N/C

N/C

(+)

(-)

(-)

N/C

N/C

N/C

(+)

(+)

(+)

(+)

(-)

To G

round W

hen R

unnin

g O

utp

ut (s

tatu

s)

+1

2V

DC

or Alarm System

Remote Control

Whi

te

Blu

e

Bla

ck

Red

See n

ext

page f

or

inst

alli

ng

inst

ruct

ion o

f th

e K

ey

Inte

rface

m

odule

into

key

barr

el.

Page 4 to 8

*C

HW

FR

is

not

inclu

ded



STEP 5

STEP 4STEP 1 STEP 2

Remove the wireless ignition node from the

dashboard. (Disassemble the dash to access the

ignition barrel)

STEP 8

STEP 6 STEP 7

Slide open the cover of the wireless ignition node.

Cut the lip off the cover.

Insert the CHWFR circuit board as shown.

Ensure the board is well aligned.

CHWFR circuit

Align the circuit board with the 6 pins on the wireless ignition node.

CHWFR

Using supplied screw ONLY, apply LOCTITE to screw and secure* wafer into PCB as per

diagram. Reassemble key module and install back into the vehicle.

* Be sure not to over tighten the screw as damage to the factory circuit board may occur.

Use a flat screw driver to lift out the 2 tabs on each side of the cover.

STEP 3

Install key interface into wireless ignition node

(-) /(+)

I/O STATUS

WIRECOLOR

SPECIFIC WIRE CONNECTION LOCATIONConnectLocation

Constant (+) 12 Volt Source Chassis Ground

Legend: RCS = Remote Control System N/C = No Connection N/A = Not Applicable

Blue

Green

Brown RCS

Orange

Red Input

Input

(+) Vehicle

Black Input (-) Vehicle

Pink

PIN

#

1

2

3

7

8

9

10

(-)

FUNCTIONS

Power Source

Ground Source

Connect to (-) When Running (status), output of RCS

Activate the module .Remote Starter Interface

Input (+) RCS Connect to Starter wire at Remote Starter or CHWFR Starter input +

Vehicle Output (+) Connect to PIN 1 at ignition barrel (See FIG.: 2) Ignition output

RCS Input (+) Connect to ignition wire at Remote Starter or CHWFR Ignition input

Vehicle Output (+) Connect to PIN 2 at ignition barrel (See FIG.: 2) Accessory output

WIRE GUIDE: CONNECTIONS Section B

10 PIN HARNESS

Page 5 to 8

Section C

To program the module, see page 7



IGN

ON

OF

F

Turn the key off and remove the key.Remove the brown wire from ground and connect to (-) ground when running (status) output from remote starter.

Section C

The PKUCG2X is compatible with 2004 Dodge Durango. However, all Durango’s built prior to 5 / 17 / 2004 must get a WCM module upgrade wich will correct a problem preventing the vehicle from learning additional keys. Chrysler is correcting this issue only when a Durango owner requests a new transponder key. The PKUCG2X must be programmed as would an additional key. The WCM replacement part number is 56038675AS.

A) P ound the vehicle's ignition cylinder as shown.

B) Plug the 2 pin loop antenna ring connector into the 2 pin connector of the module.

lace the loop antenna ring arNoteMove antenna loop as close to the front of the ignition cylinder (factory receiver ring) as possible.

IGN

IGN

IGN

IGN

IGN

ON

ON

ON

ON

ON

OF

FO

FF

OF

FO

FF

OF

F

KEY#1

KEY#1

KEY#2

KEY#2

Insert the first valid key into the ignition switch and turn it ON for at least 5 seconds, but no longer than 15 seconds.

Turn the ignition switch OFF and remove the first key.

Within 5 seconds insert the second valid key and turn the ignition switch ON.

After 10 seconds a chime will sound and the security light will begin to flash. Turn the ignition switch OFF and remove the second key.

Security

2

3

4

5

6

7

8

1

Remove cover and PC board from factory remote

*Remove the screw immediatly on the back of factory remote as shown on illustration at step 6

Within 20 seconds from step 5, jump the brown wire (ground when running output (-) status) of the PKUCG2X to ground.

Programming is now completed. You can close the remote and re-install the screw.

To groundBrown

9

For Durango 2004 built before 17/05/04

PROGRAMMING MODE FOR CODED CHRYSLER

KEY with INTEGRATED REMOTE

*You will need 2 valid keys

Page 6 to 8

Then, insert key (with the PC board removed) to the ignition position for a period of 10 sec, you will hear a chime, the light will turn on for 3 sec. Keep the key at this position for 5 sec.



87

87A

30

8685

RelayR

ed

Gre

en

Blu

e

Vio

let

Bla

ck

Vio

let/

Wh

ite

Pin

k

Pin

k/W

hite

B

row

n

Ora

ng

e

10 PIN HARNESS

(-)

To G

round W

hen R

unnin

g O

utp

ut (s

tatu

s)

Gro

und

Batt +

12v

Input

Input

Input

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

N/C

Ignition (See next page for wire color)

+12v Constant

Accessory (See next page for wire color)

5V Reference (See next page for wire color)

+12v constant

fused

Cut

RCS

INSTALL “D”GM VEHICLES EQUIPPED WITH THE GM PASS-KEY III PLUS

Se

cti

on

A

- 3 o

r 5 turn

s of lo

op a

re r

equired.

- Y

ou c

an p

rogra

m the tra

nsp

onder

only

once

.-

Do n

ot in

stall

on m

eta

l surf

ace

.

9.6

K

Re

sist

or

2n

d a

cc.

Acc

ess

ory

Ign

itio

n

+S

tart

er

Ground out (-) status

6.3

K

Re

sist

or

BC

M

+1

2V

DC

The R

esi

stor

code w

ire s

how

s 12V

for

key

sense

, 5V

during a

ccess

ory

and ig

niti

on, and ju

st u

nder

4V

during

crank.

This

is d

ue to the ig

niti

on s

witc

h s

hort

ing a

1300 o

hm

resi

stor

betw

een the R

esi

stor

code &

the 5

v R

efe

rence w

ires.

This

dia

gra

m k

eeps

the v

ehic

le fro

m s

ettin

g o

ff c

odes.

Alth

ough these

codes

do n

ot bring u

p

any

lights

on th

e d

ash

they

are

stil

l sto

red in

to th

e c

om

pute

r of th

e v

ehic

le. If a

deale

r hooks

up a

sca

n tool t

hey

will

see this

and w

ill b

e a

ble

to b

lam

e it

on the r

em

ote

sta

rt. F

or

trouble

shootin

g a

vehic

le that use

s th

is d

iagra

m

that w

ill n

ot re

mote

sta

rt the v

ehic

le w

ould

only

require b

ypass

, ig

niti

on &

acc

ess

ory

, and tach

to c

rank

the

vehic

le a

nd s

tart

. M

ake

sure

you h

ave

the ig

niti

on, and test

the tach

sourc

e. D

o n

ot tr

y to

rem

ote

sta

rt w

ithout

wirin

g this

dia

gra

m o

r th

ose

codes

will

be s

tore

d in

to the v

ehic

les

com

pute

r.

Page 7 to 8



(-) /(+)

I/O STATUS

WIRECOLOR

SPECIFIC WIRE CONNECTION LOCATIONConnectLocation

WIRE GUIDE: CONNECTIONS 10 PIN HARNESS

Constant (+) 12 Volt Source Chassis Ground

Legend: RCS = Remote Control System N/C = No Connection N/A = Not Applicable

Brown RCS

Red Input

Input

(+) Vehicle

Black Input (-) Vehicle

PIN

#

1

9

10

Section B

(-)

FUNCTIONS

Ground out when running (status) from remote starter Turn ON module

Power Source

Ground Source

1- Insert key and turn to “ON” position.2- Turn “OFF” and remove.3- Within 10 seconds, remote start the vehicle.Module is now programmed.

TRANSPONDER PROGRAMMING

Section C

Vehicle Wiring Reference Chart

Model Year

Resistor

Code

Voltage

Reference Ignition

Enclave 2008 White White/Black Pink Lucerne 2006-2008 White White/Black Pink

CTS 2008 White White/Black PinkDTS 2006-2007 White White/Black Pink

Escalade 2007-2008 Pink/Black White PinkSRX 2007-2008 White White/Black Pink

Avalanche 2007-2008 Pink/Black White Pink

Cobalt 2006-2008 White White/Black YellowEquinox 2007-2008 White White/Black Pink

Express Van 2008 Pink White Pink HHR 2006-2008 White White/Black Yellow

Impala 2006-2008 White White/Black Pink Malibu 2004-2008 White White/Black Pink

Monte Carlo 2006-2007 White White/Black Pink Silverado 2007-2008 Pink/Black White Pink Suburban 2007-2008 Pink/Black White Pink

Tahoe 2007-2008 Pink/Black White Pink

Acadia 2007-2008 White White/Black Pink

Savana Van 2008 Pink White PinkSierra 2007-2008 Pink/Black White Pink

Yukon 2007-2008 Pink/Black White Pink

H2 2008 Pink/Black White Pink

G5 2007-2008 White White/Black Yellow

G6 2005-2008 White White/Black PinkPursuit G5 2006-2008 White White/Black Yellow

Solstice 2006-2008 White White/Black YellowTorrent 2007-2008 White White/Black Pink

Aura 2007-2008 White White/Black PinkOutlook 2007-2008 White White/Black PinkSky 2007-2008 White White/Black Yellow

VUE 2008 White White/Black Pink

XL7 2007-2008 White White/Black Pink

Buick

Cadillac

Chevrolet

GMC

Suzuki

HUMMER

Pontiac

Saturn

Page 8 to 8



LIMITED ONE-YEAR CONSUMER WARRANTY

For a period of ONE YEAR from the date of purchase of a Directed Electronics remote start or security product, Directed Electronics. (“DIRECTED”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote start accessory piece (hereinafter the “Part”), which proves to be defective in workmanship or material under normal use, provided the following conditions are met: the Part was purchased from an authorized DIRECTED dealer; and the Part is returned to DIRECTED, postage prepaid, along with a clear, legible copy of the receipt or bill of sale bearing the following information: consumer’s name, address, telephone number, the authorized licensed dealer’s name and complete product and Part description.

This warranty is nontransferable and is automatically void if the Part has been modified or used in a manner contrary to its intended purpose or the Part has been damaged by accident, unreasonable use, neglect, improper service, installation or other causes not arising out of defect in materials or construction.

TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE AND WARRANTY OF NON INFRINGEMENT OF INTELLECTUAL PROPERTY, ARE EXPRESSLY EXCLUDED; AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON OR ENTITY TO ASSUME FOR IT ANY DUTY, OBLIGATION OR LIABILITY IN CONNECTION WITH ITS PRODUCTS. DIRECTED HEREBY DISCLAIMS AND HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING DEALERS OR INSTALLERS. IN THE EVENT OF A CLAIM OR A DISPUTE INVOLVING DIRECTED OR ITS SUBSIDIARY, THE PROPER VENUE SHALL BE SAN DIEGO COUNTY IN THE STATE OF CALIFORNIA. CALIFORNIA STATE LAWS AND APPLICABLE FEDERAL LAWS SHALL APPLY AND GOVERN THE DISPUTE. THE MAXIMUM RECOVERY UNDER ANY CLAIM AGAINST DIRECTED SHALL BE STRICTLY LIMITED TO THE AUTHORIZED DIRECTED DEALER’S PURCHASE PRICE OF THE PART. DIRECTED SHALL NOT BE RESPONSIBLE FOR ANY DAMAGES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR THE LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE. NOTWITHSTANDING THE ABOVE, THE MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR AT DIRECTED’S OPTION THE PART AS DESCRIBED ABOVE.

Some states do not allow limitations on how long an implied warranty will last or the exclusion or limitation of incidental or consequential damages. This warranty gives you specific legal rights and you may also have other rights that vary from State to State. DIRECTED does not and has not authorized any person or entity to create for it any other obligation, promise, duty or obligation in connection with this Part.920-0007 07-06

PROTECTED BY U.S. PATENTS: 5,719,551; 6,011,460 B1 *;6,243,004 B1; 6,249,216 B1; 6,275,147 B1; 6,297,731 B1; 6,346,876 B1; 6,392,534 B1; 6,529,124 B2; 6,696,927 B2; 6,756,885 B1; 6,756,886 B2; 6,771,167 B1; 6,812,829 B1; 6,924,750 B1; 7,010,402 B1; 7,015,830 B1; 7,031,826 B1; 7,046,126 B1; 7,061,137 B1; 7,068,153 B1; 7,205,679 B1; CDN. PATENT: 2,320,248; 2,414,991; 2 , 4 1 5 , 0 1 1 ; 2,415,023; 2,415,027; 2,415,038; 2,415,041; 2,420,947; 2,426,670; 2,454,089 EUROPEAN PATENT:1,053,128 PAT. PENDING: 2,291,306; MADE IN CANADA

This Interface kit / Data Bus Interface part has been tested on the listed vehicles. Other vehicles will be added to the select vehicle list upon completion of compatibility testing. Visit website for latest vehicle application guide. DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the bypass kit / data bus interface part(s) be held liable for any consequential damages sustained in connection with the part(s) installation. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other individual to assume obligation or liability in relation to the interface kit / data bus interface part(s) other than its replacement. N.B.:Under no circumstances shall the manufacturer and distributors of this product be liable for consequential damages sustained in connection with this product and neither assumes nor authorizes any representative or other person to assume for it any obligation or liability other than the replacement of this product only.



model: pkucg2x - microsoftmodel: pkucg2x chrysler 2nd gen and gm passkey 3+ type rf transponder...

Documents