material handling solutions - techno · pdf filematerial handling solutions ... foot mounted...
Post on 25-Mar-2018
215 Views
Preview:
TRANSCRIPT
0.25-50 TONS
Material Handling Solutions
FEATURES:
LED LOAD DISPLAY UNIT WITH
LOAD CONTROLLER
RADIO REMOTE CONTROL (R. R. C.)
ANTI COLLISION SYSTEM
DSL SHROUDED SYSTEMS
CONTROL PANEL FEATURES TO SHOW
PAINTS
Applications:
Steel Plants
Power Plants
Oil & Gas
Construction Site
Factories
Ware Houses
Heavy Fabrication Units
Railway Yards
Transporters
Mine Quarries
Harbors
Large Water Works
Marine
Other Industries
Wire Rope Hoist
Tackle the load
With “TACKLERS”
Wire Rope Hoist
The Rope Hoists have a
machined steel frame.
The Rope Drum is made from
seamless pipes / steel plate
grooved to take full lift
without over-winding.
The Drum Shaft has ball
bearings to ensure smooth
running with gears fitted on
anti-friction ball bearings in
oil bath lubrication.
The Motor confirms as per IS-
325.
The Wire Ropes are designed
as per IS-2266 specifications.
The Forged Hooks abide to
IS-15560 or equivalent.
The Rope Guides are
attached to prolong rope life.
Types of Electric Wire Rope Hoist Products:
Class: II A; II B, II C As per IS: 2148
ROPE DRUM FRAME 6 x 37 construction special plought hempcore flexible steel wire rope, having safety factor of 6 for class II and 7 for class III duty, is provided on the hoist. Galvanized and other construction of rope can be provided for special application.
All steel fabricated machined and bolted type. The gear box is rigidly alligned with the end load plates by substaintially holding the transfer members which also form the motor platform for foot mounted motors.
MOTOR ROPE DRUM Foot Mounted squirrel cage induction motor designed and manufacturerd to IS 325 of reputed make are used, Motors are totally enclosed, half hour rated, with high starting torque, specially designed and built for hoist duty. The motors suitable for frequent start stop as well as braking and are provided with class ‘B’ insulation.
The rope drum is made of sturdy seamless pipe or fabricated from steel plates and is grooved to take the full lift without overwinding. Large drum diameter to rope ration reduce wear and cable fatigue. The drum shaft revolves in ball bearing, ensuring smooth running.
BRAKE ROPE GUIDE Disc shoe type spring loaded brakes are provided for heavy duty operation. Brakes are mouted on the non-driving end of the motor and are easily accessible.
Standard “TACKLERS” Hoist carries rope guide and pressure ring as standard feature. Cast iron fully en-circling guide ring fixed aroud the grooves of the drum to ensure correct rope lay.
TROLLEY FLAME PROOF HOIST
Cross Travel Trolley are designed to suit standard Rolled Steel Joist or box girder. The trolley frame is rigidly bolted with hoist frame through series of hoies. Adjustments of flange widht, C.T. Wheels are with ball bearing and mounted on EN 8 Steel axles.
“TACKLERS” Wire Rope Hoist are specially built with flame proof electricals to suit hazardous area in chemical plants, confirming to IS 2148, all electricals are duly certified by Central Mining Research Station, Dhanbad for classified gas groups I, IIA, IIB & IIC.
CONTROLS FLAME PROOF HOIST / CRANES
Every hoist is provided with a control panel comprising of standard make heavy duty, direct – on line reversing type air brake contactors, transformer and fuses. Doust proof M.S. sheet metal cabinet.
Above “TACKLERS” products are with flame proof electricals confirm to IS 2148, also duly certified by CMRS, Dhanbad and are suitable for Gas Grop I, IIA, IIB & IIC.
GEARS BOTTOM BLOCK
Alloy steel hobbed teeth helical spur gears with solid pinions runnings on ball / roller bearing with oil bath lubrication.
Bottom Hook Assembly consisting of drop forged steel hook mounted on thrust Ball Bearings, with large diameter sheave and hook plates made our of steel.
PUSH BUTTON STATION LIMIT SWITCH
P.B. Switch of reputed make is used. 2 stations (Up-Down) & 4 stations (Up-Down & Left-Right).
To avoid overwinding or overlowering of wire rope, limit switches are provided with each hoist, which ensures the highest & lowest position of load hook.
TECHNICAL DATA OF WIRE ROPE HOISTS CAPACITY 0.25T 0.5T 1T 1.5T 2T 3T 5T 7.5T 10T 15T 17.5T 20T 25T
STD. LIFT (M) 6 6 6 6 6 6 6 6 6 6 6 6 6
HOISTING SPEED (MPM) 3.5/5 3.5/4 3.5/4 3.5/4 3.5/4 3.5 3.5 3.5 3 2.5 1.5-2 1.5-2 1.5-2
MOTOR (HP) 0.25 0.75 1.5 2 3 5 6 7.5 10 12.5 20 20 25
CROSS TRAVEL
SPEED (MPM) 12/15 15/17 15/17 15/17 15/17 15/17 15/17 15 15 15-17 15-17 15-17 15-17
MOTOR (HP) 0.15 0.25 0.25 0.25 0.5 0.5 0.75 0.75 1 1.5 2 2 1.5X2
NO. OF FALL 2 2 2 2 2 2 4 4 4 4/6 4 4 4
HEAD ROOM (HD) 500 635 635 635 650 1000 1050 1350 1350 1700 1700 2000 2000
TOTAL LENGTH (L) 515 680 680 680 930 1095 1195 1090 1440 1755 1800 1800 1900
TOTAL WIDTH (W) 385 570 570 570 620 870 870 1100 1100 1530 1550 1550 1550
TOTAL HEIGHT (H) 385 780 790 800 875 1170 1170 1600 1850 1900 1350 1350 1550
A 365 470 470 520 520 685 785 900 950 1150 1150 1300 1300
B 135 125 125 125 150 220 220 300 300 345 350 350 350
C 115 140 140 140 170 190 190 190 190 200 350 350 350
D 345 440 470 440 580 700 650 850 850 1040 1050 1050 1050
E 340 425 425 425 465 420 465 455 500 500 800 800 800
F 150 200 200 200 250 260 260 260 330 330 480 480 480
WEIGHT (KGS.) 55 175 180 190 265 480 560 980 1060 2000 2300 2500 3500
LAYOUT DRAWING OF WIRE ROPE HOIST & FALLS:
* Extra Lift can be given as per Customer’s Requirement * 30 and 40 Tons dimensions can be available on Customer’s Requirement
This Technical Specifications are as per standard Hoist. German type and Low Space Hoist specification on request.
All dimensions are approximate in mm. The Design, materials and specifications subject to change for improvements without notice.
Crane Crab End Carriages / End Truck Electric Panel Features:
Dust proof Panel enclosure made from
16 SWG sheet metal with appropriate
gasket.
Degree of Protection available as per
application and environment
Condition. IP-65, CE CERTIFIED.
Air Filters are provided in the case of
exhaust fan requirement.
All wiring is conducted in superior
quality PVC cable boxes.
Proper installation and lifting
arrangement are provided.
Plate for component mounting is used
of 10 SWG sheet metal.
All wires are used of reputed make
and 1.1 KV voltage grade.
PVC Insulated sleeve lugs are used to
avoide intershort on component and
as well as for safety purpose.
Insulation test on 1.1 K.V. HV Tester is
conducted.
DSL Box type Shrouded System
C-Rail Festoon System T-Track System
Push Button Stations Anti Collision Devices LED Load Display Indicator
Radio Remote Control
TECHNO INDUSTRIES
Plot No.: 613, Phase – IV, Nr. Neeka Tube Cross Road, G.I.D.C. Vatva, Ahmedabad – 382445, Gujarat, India. Mobile: +91-9328739901, +91-9825442511 Phone: +91-79-40323330 / 25830742 Fax No: +91-079-25831839 E-Mail: info@technoind.com Website: www.technoind.com
Crane Kits:
top related