internal combustion engine plant diesel power plant

INTERNAL COMBUSTION ENGINE PLANT - DIESEL POWER PLANT

Introduction – IC Engines, types, construction– Plant layout with auxiliaries – fuel supply system, air starting equipment, lubrication and cooling system – super charging.

Prepared by : B Venkatesh

ANNAMACHARYA INSTITUTE OF TECHNOLOGY & SCIENCES::RAJAMPET

(AUTONOMOUS)DEPARTMENT OF MECHANICAL ENGINEERING

DIESEL POWER PLANT Layout

This system supplies necessary air to the engine for fuel combustion. It consists of pipes for the supply of fresh air to the engine manifold. Filters are provided to remove dust particles from air which may act as abrasive in the engine cylinder.

COOLING SYSTEM

Air Cooling system

Lubricating System The system minimises the wear of rubbing surfaces of the engine.

It comprises of lubricating oil tank, pump, filter and oil cooler. The lubrication oil is drawn from the lubricating oil tank by the pump and is passed through filter to remove impurities .The clean lubrication oil is delivered to the points which require lubrication. The oil coolers incorporated in the system keep the temperature of the oil low.

Performance Testing of Diesel Engine Power Plant

References

1. Power Plant Engineering : C. Elanchezhian, L. Saravanakumar, B. Vijaya Ramnath

2. POWER PLANT ENGINEERING :MANOJ KUMAR GUPTA

3. Power Plant Engineering : Hegde R.K.4. Power Plant Engineering (WBSCTE): Samsher

Gautam5. Power System Engineering: R.K. Rajput6. Power System Engineering: IGNOU material