installation manual for using your throttle v3€¦ · installation manual for using your tq thank...
Post on 30-Apr-2020
3 Views
Preview:
TRANSCRIPT
INSTALLATION MANUAL FOR USING YOUR THROTTLE V3
Version 1.3.3
28. April 2016 www.cockpitforyou.com
Torsten Müller
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 2 von 21
Installation manual for using your TQ
Thank you for purchasing the motorized version V3 of our new COCKPITFORYOU 737
throttle quadrant. It has been assembled and tested with the greatest care. To make
the installation as convenient as possible for you, we tried to describe the installation
process in great detail. Should you still experience difficulties with the setup or
operation of your throttle quadrant, please do not hesitate to contact us via email or
phone. In the near future we will release a video setup tutorial in addition to this manual
that will guide you through all the necessary steps.
We hope you will have as much fun flying your new TQ as we had engineering and assembling it.
1. Before getting started
download CFY_TQ.zip
download vJoy.rar
2. Connecting your Throttlew
Your motorized butterfly comes with 1 Ethernet
port and 1 female PC power supply.
PC power supply (100-240V / 50-60Hz)
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 3 von 21
Ethernet cable:Plug in the Ethernet cable into a free port of an Ethernet switch.
Minimum requirement for switch is 100 Mbit.
3. installation software
1. Create new folder "CFY" on drive C:
2. Extract CFY_TQ.zip to C: CFY 3. In the folder C:\CFY double click the file "vJoy_216_150815". Installation may
take 5 minutes. Restart computer. If installation seems to be halted after approx 5 minutes you can restart computer.
4. In the folder C:\CFY double click the file "setup"
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 4 von 21
Change the installation folder in "C: CFY" Press “Next” and follow installation instructions
5. Open the folder "C: CFY \ V1.3.3 Copy file "CFY QT_CONFIG"
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 5 von 21
6. Open the folder "C: CFY and Insert File "CFY QT_CONFIG"
7. Please read the file “Releasenote.txt” carefully.
8.When PC PSU for TQ is turned on and TQ is connected via ethernet cable
start "CFY_TQ Console"
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 6 von 21
Press “Understood”
The calibration is Carried out (at first start)
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 7 von 21
The "TQ V3" is ready
8. Start your flight simulator The "TQ V3" connects to your flight simulator
9. Start your AddOn Software None or “TQ V3” connects to proSim737 or SimAvionics or PM
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 8 von 21
10. Sign the Trim button on the Yoke (Soon automatically)
Open FSUIPC, select “Buttons + Switches”
Press the Nose up trim switch on your yoke
Check the „Select for FS control“ box
Select “Offset Word Set” from the list
Set the first offset to x9093 and the parameter to 2
The Control sent when the button is released:
Select “Offset Word Set” from the list
Set the first offset to x9093 and the parameter to 0
Press “OK” to save these changes
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 9 von 21
Open FSUIPC, select “Buttons + Switches”
Check the “Select for FS control“ box
Select “Offset Word Set” from the list
Set the first offset to x9093 and the parameter to 1
The Control sent when the button is released:
Select “Offset Word Set” from the list
Set the first offset to x9093 and the parameter to 0
Press “OK” to save these changes
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 10 von 21
All automatically created joystick assignments in FS delete !!!
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 11 von 21
Advanced settings:
FS2004 without AddOn => no adjustments necessary / FSUIPC must be installed
FS FSX without AddOn => no adjustments necessary / FSUIPC must be installed
FS P3D without AddOn => no adjustments necessary / FSUIPC must be installed
FS XPlane without AddOn => no adjustments necessary / XPUIPC must be installed
PM => no adjustments necessary / FSUIPC must be installed
IFly => see item 11 / FSUIPC must be installed
Sim-Avionics => see item 12 / FSUIPC or XPUIPC (XPlane) must be installed
PMDG NGX => see item 13 / FSUIPC must be installed
ProSim737 => see item 14 / FSUIPC must be installed
11. For IFly
IFly to FSUIPC installed.
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 12 von 21
12. For Sim-Avionics
13. For PMDG_NGX Current FSUIPC4 version! As of today: 4,949 FSUIPC4 Current SimConnect version!
Configuring the PMDG ini open Windows Explorer
open Computer , Drive (where FSX is instaled), FSX,
open folder "PMDG"
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 13 von 21
open folder "PMDG 737 NGX"
open "737NGX_Options.ini"
Writing at the end of the text following this:
[SDK] EnableDataBroadcast=1
Please check carefully !!!
The text must be written exactly !!!
In small and capital letters Be sure !!!
The text must be written exactly !!!
In small and capital letters Ensure !!!
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 15 von 21
14. For ProSim737 Open ProSim737 Configuration Site Drivers
Site Switches MCP/Throttle
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 17 von 21
MCP Speed hold Pushed FSUIPC 8 bit U 0x9015 MCP VNAV Pushed FSUIPC 8 bit U 0x9016
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 18 von 21
MCP Speed FSUIPC 8 bit U 0x9019 MCP VNAV FSUIPC 8 bit U 0x902
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 19 von 21
Site Gates
Autopilot pitch CMD FSUIPC 8 bit U 0x9010
Throttle Servo Power left FSUIPC 8 bit U 0x9003 Throttle Servo Power right FSUIPC 8 bit U 0x9004
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 20 von 21
Site Levers
Set up and calibrate Flap axis
Set up and calibrate Spoiler axis
V3 TQ Installation Manual - version 2016-04-28
SiteSeite 21 von 21
“Sit back relax and enjoy your flight.“
This is it. By now your 737 throttle quadrant should be up and running. In case you have any further
questions or you are experiencing difficulties, please do not hesitate to contact us via email or phone.
Torsten Müller
Berlin, Germany 2016
top related