in e swellseal 8v

7/21/2019 In E Swellseal 8V

http://slidepdf.com/reader/full/in-e-swellseal-8v 1/2

Installation Instructions

1. Remove dust, dirt and

loose parts by brushing

rmly.

4. Press Swellseal 3V / 8V

rmly into the glue.

3. Unroll the Swellseal

3V / 8V in the middle of the

 joint.

2. dry: apply a 3 cm wide

strip of neoprene glue in

the middle of the joint.

wet: apply a 3 cm wide strip

of Swellseal Mastic WA inthe middle of the joint.

5. Roll ends are simply

butted together. No lateral

overlap.

Q   u  a  l   i   t    y    A

  s  s  u  r  a  n  c  eISO 9001

Q   u  a  l   i   t    y    A

  s  s  u  r  a  n  c  eISO 9001

7/21/2019 In E Swellseal 8V

http://slidepdf.com/reader/full/in-e-swellseal-8v 2/2

Industriepark 8 • B-2220 Heist-op- den-Berg • Belgium

Tel.: +32 (0)15 24 93 60 • Fax: +32 (0 )15 24 80 72

Email: conchem@deneef.net • www.deneef.net

The provided information is the result of study and experience. All details are given in good faith, but are in no case to be considered as a warranty, nor makeus assume any responsibility, even in case of detraction of third party’s rights.

v. 05072004-01