in e swellseal 8v
DESCRIPTION
In E Swellseal 8VTRANSCRIPT
7/21/2019 In E Swellseal 8V
http://slidepdf.com/reader/full/in-e-swellseal-8v 1/2
Installation Instructions
1. Remove dust, dirt and
loose parts by brushing
rmly.
4. Press Swellseal 3V / 8V
rmly into the glue.
3. Unroll the Swellseal
3V / 8V in the middle of the
joint.
2. dry: apply a 3 cm wide
strip of neoprene glue in
the middle of the joint.
wet: apply a 3 cm wide strip
of Swellseal Mastic WA inthe middle of the joint.
5. Roll ends are simply
butted together. No lateral
overlap.
Q u a l i t y A
s s u r a n c eISO 9001
Q u a l i t y A
s s u r a n c eISO 9001
7/21/2019 In E Swellseal 8V
http://slidepdf.com/reader/full/in-e-swellseal-8v 2/2
Industriepark 8 • B-2220 Heist-op- den-Berg • Belgium
Tel.: +32 (0)15 24 93 60 • Fax: +32 (0 )15 24 80 72
Email: [email protected] • www.deneef.net
The provided information is the result of study and experience. All details are given in good faith, but are in no case to be considered as a warranty, nor makeus assume any responsibility, even in case of detraction of third party’s rights.
v. 05072004-01