iec 61850-3 ethernet switch - ctc u
Post on 18-Nov-2021
6 Views
Preview:
TRANSCRIPT
www.ctcu.comCTC UNION TECHNOLOGIES CO., LTD.8F, No.60, Zhouzi St. Neihu, Taipei 114, Taiwan TEL : +886 2 2659-1021 FAX : +886 2 2659-0237 sales@ctcu.com
R
03/2017 V1.0
Copyright 2017 CTC UNION TECHNOLOGIES CO., LTD.CTC UNION and the CTC UNION logo are trademarks of CTC UNION TECHNOLOGIES CO., LTD. All rights reserved. All other trademarks are the property of their respective owners.Specifications & design are subject to change without prior notice. Please visit CTC UNION website for more details.
IEC 61850-3 Ethernet Switch
Industrial Product DM
Communication exTension Conversion Power substation
IEEE 1588V2
EN50121-4UL60950-1 IEC61850-3 u-Ring IEEE 1588v2 GOOSESmartViewNegativevoltage
In power substation environments, where electromagnetic
interference is very high, the IPS series of Ethernet switches,
complying with IEC61850-3 and IEEE 1613 standards, are
especially designed for power substation. In smart grid applica-
tions, zero packet loss must be maintained with wide tempera-
ture tolerances to ensure reliable packet transmissions.
Features• Redundant & wide range power inputs (isolated 24/48VDC,110/220V DC/AC)
• u-Ring (up-to 5 rings) for redundancy cabling
• Cable diagnostic, Green Ethernet
• SmartConfigTM for quick & easy mass configuration
• SmartViewTM for centralized management
• Supports negative power input with isolated RS-232 console port
(for example in telecom system)
• SNMP, Web, Telnet, CLI, IPV6, DHCP, RMON, MIB II, QoS, CoS, Security,
IGMP, VLAN, LACP, IEEE1588 V2
Key FeaturesGOOSE Message
For mission-critical applications, GOOSE messages can be placed into the highest QoS priority so as to avoid packet loss and delay.
• IPS series Ethernet switches can communicate with GOOSE multicasts. • Critical communications are prioritized with the highest QoS priority.
• Achieve zero packet loss to ensure reliable transmissions.
Hydroelectric Power Stations Wind Power Plant Solar Energy Power Plant Power Substation
IEEE 1588 PTP V2Ethernet equipment has become a widely accepted commodity as it replaces traditional and expensive legacy technology. The multitude of nodes needed to be synchronized as precisely as possible over the network are ever increasing. IEEE1588 PTP V2 is a packet based network protocol that carries time stamps in Ethernet format. The applications requiring this technology fall within the major markets for smart grids and telecommunication networks.
• Ordinary-Boundary
• Peer to Peer Transparent Clock
• End to End Transparent Clock
• Master
• Slave
IEEE 1588 PTP v2 Application in Power substation & Smart Grid
Backbone Network
Primary ReferenceClock (PRC)
IEEE 1588 v2IEEE 1588 v2
PowerSubstation
Solar Energy Power Plant
Wind PowerPlant
Supports 5 operating mode
Model List
GOOSE
Model Managed TotalPort
RJ45 Port FiberRedundant Input Power
Certification10/100
Base-TX10/100/1000
Base-T100/1000 Base-X
IEC61850-3IEEE1613
RailwayEN50121-4
Safety UL60950-1
EN61000-6-2EN61000-6-4
CE, FCC
IPS-G803SM 11 8 3 SFP 110/220V AC/DC or 24/48, -48V DC
IPS-803GSM 11 8 3 SFP 110/220V AC/DC or 24/48, -48V DC
top related