how to start using the si6000b
Post on 03-Feb-2016
55 Views
Preview:
DESCRIPTION
TRANSCRIPT
How to start using the Si6000b
polarinstruments.com
•How to graph Zo Vs H
(and predict impedance change due tovariations in laminate thickness)
(This tutorial assumes you have only elementary knowledge of Excel)
polarinstruments.com
In this example find:
•How to graph Zo Vs H
Knowing how Zo varies with H can help you increase yields by makingprocess adjustments to compensate
for base material variation(This tutorial assumes you have only elementary knowledge of Excel)
polarinstruments.com
In this example find:
Please run through all the slides to give yourself an overview.
Then launch the Si6000b, and click the surface microstrip graphic simply work through the examples yourself.
If you are not familiar with some of the features of Excel, you may find it worth taking a brief course to get the best from your Si6000b
polarinstruments.com
How to use this tutorial
•Graphing Zo Vs H
(All the examples that follow use surface microstrip structures which are fully enabled in the evaluation Si6000b)
polarinstruments.com
Example 1
Here’s how to run SI6000 for the first time
its simple to drag and drop the field
solvers in Excel...
Drag function(you must position the cursor carefully
so the black cross appearsas you drag down)
+
Drag function
Click calculator
Watch this area
How Zo changes with core dimensions
•Here is one example of a spreadsheet created by a customer who needed to
use Si6000 to graph impedance sensitivity against structure height..
polarinstruments.com
How creative can you be?
Thank you for taking the time to study this introduction.
If you download the following two presentations youwill find how easy it is to build an example similar to the
previous slide for yourself.
•Si6000Zo vs Er.ppt and Si6000 for your application.ppt
More information: ken.taylor@polarinstruments.com
polarinstruments.com
top related