hmc916 (v00.0410) - obsolete - analog devices
Post on 10-Nov-2021
2 Views
Preview:
TRANSCRIPT
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 1
HMC916LP3ESMT MMIC x3 ACTIVE
FREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
v00.0410
General Description
Features
Functional Diagram
Output power: 2 dBm
spurious suppression: >15 dBc
ssB phase Noise: -152 dBc/Hz @ 100 kHz Offset
single supply: +5V @ 83 mA
16 lead 3x3 mm sMt package: 9 mm²
Electrical Specifications, TA = +25° C, Vcc= 5V [1]
Typical Applicationsthe HMC916lp3e is ideal for:
• Microwave radio & VsAt
• Military radios, radar & eCM
• test instrumentation
the HMC916lp3e is an active x3 frequency mult- iplier in a 3x3 mm leadless qFN surface mount package. power output is 2 dBm typical from a single +5V supply and varies little vs. input power, temperature and supply voltage. suppression of undesired fundamental and spurious is 15 dBc typical with respect to output signal level. the low additive ssB phase noise of -152 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. the HMC916lp3e is ideal for use in lO multiplier chains allowing reduced parts count versus traditional approaches.
parameter Min. typ. Max. units
Frequency range, input 2.66 - 5.33 GHz
Frequency range, Output 8 - 16 GHz
input power range 0 5 10 dBm
Output power range 2 dBm
spurious -15 dBc
input return loss 13 dB
Output return loss 15 dB
ssB phase Noise (100 kHz offset) pin = +5 dBm -152 dBc/Hz
supply Current (icc) 83 mA
[1] All data shown is single ended operation.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 2
Output Power vs.Temperature @ 0 dBm Drive Level [1]
Output Power vs. Supply Voltage @ 0 dBm Drive Level [1]
Spurious Output vs. FinPin = +5 dBm [1]
Output Power vs. Drive Level [1]
Output Return Loss vs. Temperature [1]Input Return Loss vs. Temperature [1]
HMC916LP3Ev00.0410
SMT MMIC x3 ACTIVEFREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
-6
-4
-2
0
2
4
6
7 8 9 10 11 12 13 14 15 16 17
+25C+85C-40C
OU
TP
UT
PO
WE
R (
dBm
)
OUTPUT FREQUENCY (GHz)
-6
-4
-2
0
2
4
6
7 8 9 10 11 12 13 14 15 16 17
0 dBm+ 5 dBm+ 10 dBm
OU
TP
UT
PO
WE
R (
dBm
)
OUTPUT FREQUENCY (GHz)
-6
-4
-2
0
2
4
6
7 8 9 10 11 12 13 14 15 16 17
4.75V5.0V5.25V
OU
TP
UT
PO
WE
R (
dBm
)
OUTPUT FREQUENCY (GHz)
-80
-70
-60
-50
-40
-30
-20
-10
0
10
2.5 3 3.5 4 4.5 5 5.5
1rst Harmonic2nd Harmonic3rd Harmonic
4th Harmonic5th Harmonic6th Harmonic
OU
TP
UT
LE
VE
L (d
Bm
)
INPUT FREQUENCY (GHz)
-20
-15
-10
-5
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
+25C+85C -40C
RE
TU
RN
LO
SS
(dB
)
FREQUENCY (GHz)
-35
-30
-25
-20
-15
-10
-5
0
7 8 9 10 11 12 13 14 15 16 17
+25C+85C -40C
RE
TU
RN
LO
SS
(dB
)
FREQUENCY (GHz)
[1] All data shown is single ended operation.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 3
SSB Phase Noise vs. PinFout = 12 GHz, T = 25 °C [1]
Absolute Maximum Ratings
eleCtrOstAtiC seNsitiVe DeViCeOBserVe HANDliNG preCAutiONs
HMC916LP3Ev00.0410
SMT MMIC x3 ACTIVEFREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
rF input (Vcc = +5V) +20 dBm
Vcc +6.0V
storage temperature -65 to +150 °C
esD sensitivity (HBM) 100V
Icc vs. Temperature [1]
Junction temperature to Maintain1 Million Hour MttF
150 °C
Nominal Junction temperature(t = 85 °C)
101.4 °C
thermal resistance(Junction to GND paddle, 5V supply)
39.5 °C/W
Operating temperature -40 °C to + 85 °C
Reliability Information
[1] All data shown is single ended operation.
-160
-150
-140
-130
-120
1.0e+2 1.0e+3 1.0e+4 1.0e+5 1.0e+6 1.0e+7
0 dBm 5 dBm
10 dBm
SS
B P
HA
SE
NO
ISE
(dB
c/H
z)
OFFSET FREQUENCY (Hz)
75
80
85
90
4.7 4.8 4.9 5 5.1 5.2 5.3
+25C+85C -40C
OP
ER
AT
ING
CU
RR
EN
T (
mA
)
Vcc (V)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 4
Outline Drawing
NOtes:
1. leADFrAMe MAteriAl: COpper AllOY
2. DiMeNsiONs Are iN iNCHes [MilliMeters]
3. leAD spACiNG tOlerANCe is NON-CuMulAtiVe.
4. pAD Burr leNGtH sHAll Be 0.15mm MAXiMuM.
pAD Burr HeiGHt sHAll Be 0.05mm MAXiMuM.
5. pACKAGe WArp sHAll NOt eXCeeD 0.05mm.
6. All GrOuND leADs AND GrOuND pADDle Must Be
sOlDereD tO pCB rF GrOuND.
7. reFer tO Hittite AppliCAtiON NOte FOr suGGesteD
lAND pAtterN.
part Number package Body Material lead Finish Msl rating package Marking [1]
HMC916lp3e roHs-compliant low stress injection Molded plastic 100% matte sn Msl1 [2] 916XXXX
[1] 4-Digit lot number XXXX[2] Max peak reflow temperature of 260 °C
Package Information
HMC916LP3Ev00.0410
SMT MMIC x3 ACTIVEFREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 5
Pin Description
HMC916LP3Ev00.0410
SMT MMIC x3 ACTIVEFREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
pin Number Function Description interface schematic
1, 4 - 9, 12, 13, 15, 16
GNDthese pins and exposed paddle must
be connected to rF/DC ground.
2rFNiN
(or GND)
this pin is AC coupled and matched to 50 ohms, and is 180° out of phase with pin 3 for differential opera-
tion. rF/DC ground for single ended operation.
3 rFiN this pin is AC coupled and matched to 50 ohms
10 rFOut this pin is AC coupled and matched to 50 ohms
11 rFNOutthis pin is AC coupled and matched to 50 ohms, and is 180° out of phase with pin 10 for differential opera-
tion. terminate in 50 ohms for single ended operation.
14 Vcc supply voltage +5V
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Fr
eq
. Mu
ltip
lie
rs
- A
Ct
iVe
- s
Mt
5
5 - 6
Evaluation PCB
item Description
J1 - J3 pCB Mount sMA Connector
J4, J5 DC pin
C1 100 pF Capacitor, 0402 pkg.
C2 1000 pF Capacitor, 0402 pkg.
C3 4.7 µF Capacitor, 0402 pkg.
u1 HMC916lp3e x3 Active Multiplier
pCB [2] 128702 eval Board
[1] reference this number when ordering complete evaluation pCB
[2] Circuit Board Material: rogers 4350
the circuit board used in the application should be generated with proper rF circuit design tech-niques. signal lines should have 50 Ohm imped-ance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from Hittite upon request.
List of Materials for Evaluation PCB 128383 [1]
HMC916LP3Ev00.0410
SMT MMIC x3 ACTIVEFREQUENCY MULTIPLIER, 8 - 16 GHz OUTPUT
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D
top related