grid-lok · fuji nxt m3 nxt m3 dual nxt m6 nxt m6 dual . i-pulse m series . juki fx 1 fx 2 fx 3 ke...
Post on 19-Apr-2020
5 Views
Preview:
TRANSCRIPT
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
ASM DEK (squeegees)
GHD8112 (Gold modules 12”)
03130368-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 81mm
Height (pins reset): 60mm
Pins count: 46
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed only ifpins should raise in print height.
GHD8118 (Gold modules 18”)
03128499-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 81mm
Height (pins reset): 60mm
Pins count: 70
OR
+KIT_111 (full kit with no modules)
03140727-01
ASM DEK (ProFlow)
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD8712 (Gold modules 12”)
03130475-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 87mm
Height (pins reset): 60mm
Pins count: 46
+
GHD8718 (Gold modules 18”)
03130371-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 87mm
Height (pins reset): 60mm
Pins count: 70
OR
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed only ifpins should raise in print height.
KIT_111 (full kit with no modules)
03140727-01
Ekra
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD8712 (Gold modules 12”)
03130475-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 87mm
Height (pins reset): 60mm
Pins count: 46
INTEGRATION
The full kit consists of KIT_111 plus thedesired number of modules describedhere.
087_BLA board lifters needed.
077_SBA optical sensor needed.
GHD8718 (Gold modules 18”)
03130371-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 87mm
Height (pins reset): 60mm
Pins count: 70
OR
+
087_BLA (03128724-01) 077_SBA (03128500-01)
+
KIT_111 (full kit with no modules)
03140727-01
Ersa
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD9812 (Gold modules 12”)
03136187-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 71mm
Pins count: 46
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
GHD9818 (Gold modules 18”)
03140858-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 71mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules)
03140727-01
Juki GKG
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD6512 (Gold modules 12”)
03148497-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 65mm
Height (pins reset): 47mm
Pins count: 46
GHD6518 (Gold modules 18”)
03148498-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 65mm
Height (pins reset): 47mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
KIT_111 (full kit with no modules)
03140727-01
MPM
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD3912 (Gold modules 12”)
03136183-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 39mm
Height (pins reset): 26mm
Pins count: 46
GHD3918 (Gold modules 18”)
03130467-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 39mm
Height (pins reset): 26mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
KIT_111 (full kit with no modules)
03140727-01
Panasonic
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD4112 (Gold modules 12”)
03132059-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 41mm
Height (pins reset): 28mm
Pins count: 46
GHD4118 (Gold modules 18”)
03131865-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 41mm
Height (pins reset): 28mm
Pins count: 70
OR
+
041_BLA (03148504-01) 077_SBA (03128500-01)
+
INTEGRATION
The full kit consists of KIT_111 plus thedesired number of modules describedhere.
041_BLA board lifters needed.
077_SBA optical sensor needed.
KIT_111 (full kit with no modules) 03140727-01
Speedprint
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD5912 (Gold modules 12”)
03148495-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 59mm
Height (pins reset): 45mm
Pins count: 46
GHD5918 (Gold modules 18”)
03148496-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 59mm
Height (pins reset): 45mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
KIT_111 (full kit with no modules)
03140727-01
Yamaha YSP
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GHD6712 (Gold modules 12”)
03140916-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 67mm
Height (pins reset): 49mm
Pins count: 46
GHD6718 (Gold modules 18”)
03140833-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 67mm
Height (pins reset): 49mm
Pins count: 70
OR
+
+ 067_BLA
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
067_BLA board lifters needed.
No optical sensor needed.
KIT_111 (full kit with no modules) 03140727-01
Yamaha YCP
6 x twin leashes with fittings, for connecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
INTEGRATION
The full kit consists of KIT_111 plus the desirednumber of modules described here.
067_BLA board lifters needed.
No optical sensor needed.
The manual modules are installed stand aloneon the machine table.
077_SBA (03128500-01)
+
GMD6714M (Silver manual modules 14”)
03132676-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 67mm
Height (pins reset): 50mm
Pins count: 27
GMD6714AM (Silver hybrid modules 14”)
03138450-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 67mm
Height (pins reset): 50mm
Pins count: 27
OR
+KIT_111 (full kit with no modules)
03140727-01
GMD7714M (Silver manual modules 14”)
03132685-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 77mm
Height (pins reset): 60mm
Pins count: 27
ASM Siplace F, C, S, HS50 series
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD7714A (Silver automatic modules 14”)
03136228-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 77mm
Height (pins reset): 60mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
ASM Siplace SX1, SX2, D series (single table)
GMD9714M (Silver manual modules 14”)
03128624-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD9714A (Silver automatic modules 14”)
03136230-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
ASM Siplace SX1, SX2, D series (dual table)
GMD9714M (Silver manual modules 14”)
03128624-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD9714A (Silver automatic modules 14”)
03136230-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
+
2 x 077_SBA (03128500-01) +
KIT_211 (full dual kit with no modules)
03136308-01
ASM Siplace X, SX4, HS60 series (four tables)
GMD9714M (Silver manual modules 14”)
03128624-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
INTEGRATION
The full automatic kit consists of 2 x KIT_211 plusthe desired number of modules described here.This kit is capable to coordinate the modules fromtwo independent tables.
No board lifters needed.
4 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD9714A (Silver automatic modules 14”)
03136230-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
+
4 x 077_SBA (03128500-01) +
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
2 x KIT_211 (full dual kit with 0 modules) 03136308-01
Assembleon I-Flex (single table)
GMD1354M (Silver manual modules 14”)
03148512-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 135mm
Height (pins reset): 118mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD1354A (Silver automatic modules 14”)
03148511-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 135mm
Height (pins reset): 118mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Assembleon I-Flex (dual table)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD1354M (Silver manual modules 14”)
03148512-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 135mm
Height (pins reset): 118mm
Pins count: 27
GMD1354A (Silver automatic modules 14”)
03148511-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 135mm
Height (pins reset): 118mm
Pins count: 27
KIT_211 (full dual kit with no modules) 03136308-01
Assembleon GEM
GMD6914M (Silver manual modules 14”)
03132679-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 69mm
Height (pins reset): 52mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD6914A (Silver automatic modules 14”)
03132677-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 69mm
Height (pins reset): 52mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Assembleon AX-201
GMD1154M (Silver manual modules 14”)
03148510-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 115mm
Height (pins reset): 98mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD1154A (Silver automatic modules 14”)
03148509-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 115mm
Height (pins reset): 98mm
Pins count: 27
+
077_SBA (03128500-01)+
KIT_111 (full kit with no modules) 03140727-01
Fuji NXT M3
GMD5310M (Silver manual modules 10”)
03130374-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 19
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD5310A (Silver automatic modules 10”)
03132669-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 19
+
077_SBA (03128500-01)
+
KIT_111 (full kit with no modules) 03140727-01
Fuji NXT M3 (dual lane)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD5310M (Silver manual modules 10”)
03130374-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 19
GMD5310A (Silver automatic modules 10”)
03132669-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 19
KIT_211 (full dual kit with no modules)
03136308-01
Fuji NXT M6
GMD5314M (Silver manual modules 14”)
03128587-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD5314A (Silver automatic modules 14”)
03131866-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules)
03140727-01
Fuji NXT M6 (dual lane)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD5314M (Silver manual modules 14”)
03128587-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 27
GMD5314A (Silver automatic modules 14”)
03131866-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 53mm
Height (pins reset): 36mm
Pins count: 27
KIT_211 (full dual kit with no modules) 03136308-01
I-Pulse
GMD7014M (Silver manual modules 14”)
03138817-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 52mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD7014A (Silver automatic modules 14”)
03148501-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 53mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Juki FX-1, FX-2, KE, JX
GMD9714M (Silver manual modules 14”)
03128624-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD9714A (Silver automatic modules 14”)
03136230-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules)
03140727-01
Juki FX-3 (dual table)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
GMD9714M (Silver manual modules 14”)
03128624-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD9714A (Silver automatic modules 14”)
03136230-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 97mm
Height (pins reset): 80mm
Pins count: 27
+
2 x 077_SBA (03128500-01) +
KIT_211 (full dual kit with no modules) 03136308-01
Panasonic NPM-W
GMD7014M (Silver manual modules 14”)
03138817-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 52mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD7014A (Silver automatic modules 14”)
03148501-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 53mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Panasonic NPM-D (dual lane)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD7014M (Silver manual modules 14”)
03138817-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 52mm
Pins count: 27
GMD7014A (Silver automatic modules 14”)
03148501-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 70mm
Height (pins reset): 53mm
Pins count: 27
KIT_211 (full dual kit with no modules) 03136308-01
Samsung CP-20, CP-45, SM-421
GMD1324M (Silver manual modules 14”)
03132667-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 132mm
Height (pins reset): 115mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD1324A (Silver automatic modules 14”)
03141189-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 132mm
Height (pins reset): 115mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Samsung SM-471
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD1344M (Silver manual modules 14”)
03141332-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 134mm
Height (pins reset): 117mm
Pins count: 27
GMD1344A (Silver automatic modules 14”)
03141190-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 134mm
Height (pins reset): 117mm
Pins count: 27
KIT_211 (full dual kit with no modules) 03136308-01
Samsung SM-481, SM-482
GMD1344M (Silver manual modules 14”)
03141332-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 134mm
Height (pins reset): 117mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD1344A (Silver automatic modules 14”)
03141190-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 134mm
Height (pins reset): 117mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Universal GX-11S, GC-30S, GX-11D, GI-14D, GC-60D, AC-15S,
AC-30S, AI-07S
GMD5714M (Silver manual modules 14”)
03132672-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 57mm
Height (pins reset): 40mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD5714A (Silver automatic modules 14”)
03148514-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 57mm
Height (pins reset): 40mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Universal AC-90T, GC-120Q (dual table)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD5714M (Silver manual modules 14”)
03132672-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 57mm
Height (pins reset): 40mm
Pins count: 27
GMD5714A (Silver automatic modules 14”)
03148514-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 57mm
Height (pins reset): 40mm
Pins count: 27
KIT_211 (full dual kit with no modules) 03136308-01
Yamaha YS12, YS12F, YS12P, YS88, YS100, YG12, YG12F
GMD7614M (Silver manual modules 14”)
03132683-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 76mm
Height (pins reset): 59mm
Pins count: 27
6 x twin leashes with fittings, for connecting themodules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_111 plus thedesired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
GMD7614A (Silver automatic modules 14”)
03132681-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 76mm
Height (pins reset): 59mm
Pins count: 27
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Yamaha YS24, YS24X (dual table)
12 x twin leashes with fittings, for connecting themodules
211_CTL – dual table controller
2 x 006_MAN – manifold
001_DCP – Power supply 230V/24V
Air filter regulator
All necessary tubes and air pipes for kit installation
INTEGRATION
The full automatic kit consists of KIT_211 plus thedesired number of modules described here. This kitis capable to coordinate the modules from twoindependent tables.
No board lifters needed.
2 x 077_SBA optical sensor needed.
The manual modules are installed stand alone onthe machine table.
+
2 x 077_SBA (03128500-01) +
GMD7610M (Silver manual modules 10”)
03132680-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 76mm
Height (pins reset): 59mm
Pins count: 19
GMD7610AM (Silver hybrid modules 10”)
03148520-01 Length: 254mm (10”)
Width: 32mm
Height (pins set): 76mm
Height (pins reset): 59mm
Pins count: 19
KIT_211 (full dual kit with no modules) 03136308-01
Itochu-Takaya (in line machines)
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes forkit installation
GHD6212 (Gold modules 12”) 03148508-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 62mm
Height (pins reset): 44mm
Pins count: 46
+
GHD6218 (Gold modules 18”) 03136227-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 62mm
Height (pins reset): 44mm
Pins count: 70
OR
INTEGRATION
The full kit consists of KIT_111 plusthe desired number of modulesdescribed here.
No board lifters needed.
No optical sensor needed.
GMD6214A (Silver modules 14”)
03148515-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 62mm
Height (pins reset): 45mm
Pins count: 27
OR
KIT_111 (full kit with no modules) 03140727-01
Itochu-Takaya (off line machines)
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes forkit installation
GHD9812 (Gold modules 12”)03136187-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 71mm
Pins count: 46
+
GHD9818 (Gold modules 18”) 03140858-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 71mm
Pins count: 70
OR
INTEGRATION
The full kit consists of KIT_111 plusthe desired number of modulesdescribed here.
No board lifters needed.
077_SBA optical sensor needed.
GMD9814A (Silver modules 14”)
03148522-01 Length: 355mm (14”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 81mm
Pins count: 27
OR
KIT_111 (full kit with no modules) 03140727-01
Itochu-Takaya (Grid-Lok MaxTM for off line machines)
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GLM9812 (Gold Max modules 12”)
03140919-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 58mm
Pins count: 46
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
GLM9818 (Gold Max modules 18”)
03140793-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 98mm
Height (pins reset): 58mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
SPEA (Grid-Lok MaxTM)
6 x twin leashes with fittings, forconnecting the modules
111_CTL – single table controller
006_MAN – manifold for 6 modules
001_DCP – Power supply 230V/24V
002_CON – Remote control unit
Air filter regulator
All necessary tubes and air pipes for kitinstallation
GLM1012 (Gold Max modules 12”)
03140918-01 Length: 305mm (12”)
Width: 32mm
Height (pins set): 110mm
Height (pins reset): 70mm
Pins count: 46
INTEGRATION
The full kit consists of KIT_111 plus the desired number of modules described here.
No board lifters needed.
077_SBA optical sensor needed.
GLM1018 (Gold Max modules 18”)
03140792-01 Length: 457mm (12”)
Width: 32mm
Height (pins set): 110mm
Height (pins reset): 70mm
Pins count: 70
OR
+
077_SBA (03128500-01) +
KIT_111 (full kit with no modules) 03140727-01
Part No. Description Top caps
025_TIP 03128574-01 25 Rubber Compliant Top Caps for GSX
100_TIP 03128754-01 100 Rubber Compliant Top Caps for GSX
025_ETP 03128601-01 25 Rubber Compliant Top Caps (Exp)
025_UTP 03128569-01 25 Universal Compliant Caps for GHD
100_UTP 03128778-01 100 Universal Compliant Caps for GHD
025_TMP 03128582-01 25 Universal Compliant Caps for GMD
100_TMP 03130302-01 100 Universal Compliant Caps for GMD
025_TSP 03128792-01 25 Universal Compliant Caps for GHD 39mm
100_TSP 03130303-01 100 Universal Compliant Caps for GHD 39mm
Top caps, Pin repair kits, Sensors
Part No. Description Pin repair kits
018_PRK 03128623-01 DEK, Ekra, Siemens, MPM Pin Repair Kit, 15 pins
881_PRK 03128779-01 81mm HD Grid-Lok Pin Repair Kit, 25 pins
887_PRK 03128713-01 87mm HD Grid-Lok Pin Repair Kit, 25 pins
009_PRK 03142684-01 Grid-Lok Pin Repair Kit (75mm)
818_PRK 03128733-01 Grid-Lok HD Pin Repair Kit (39mm), 10 pins
062_PRK 03132652-01 Grid-Lok HD Pin Repair Kit (62mm), 25 pins
053_PRK 03132651-01 Grid-Lok Silver Pin Repair Kit, 10 pins
Part No. Description Sensors
077_SBA 03128500-01 Optical Sensor with Magnetic Base
002_SEN 03130458-01 Grid_Lok Optical Sensor
003_SEN E3HT-DS3EZ Photoelectric Switch
Fittings, Controllers, Pin-Lok, Others
Part No. Description Controllers
111_CTL 03130304-01 Single Grid-Lok controller
211_CTL 03132655-01 Double Grid-Lok controller
103_VAL 03137994-01 Valve inside control box 103_CTL
111_VAL 03132654-01 Valve inside control box 111_CTL
103_PSI 03130461-01 Pressure Sensor for 103_CTL
111_PSI 03148506-01 Pressure Sensor for 111_CTL
103_PCB 03142227-01 Programmed Circuit Board for 103_CTL
111_PCB 03148505-01 Programmed Circuit Board for 111_CTL
211_PCB 03148507-01 Programmed Circuit Board for 211_CTL
Part No. Description Others
006_MAN 03128695-01 6 Station Manifold Fully Fitted
002_STO 03128619-01 Magnetic stand off for silver modules - pair
041_BLA 03148504-01 41mm board lifters set - Panasonic
067_BLA 03132653-01 67mm board lifters set - Yamaha
087_BLA 03128724-01 87mm board lifters set - Ekra
002_CON 03128656-01 Grid-Lok Hand Held Controller (Mark 2)
001_DCP 03130298-01 24 Volt Power Supply
518_MAG 03128723-01 18" of Adhesive Magnetic Tape
Part No. Description Fittings
006_SMF 03128699-01 6 Female Silver Quick Connect
006_RMF 03130459-01 6 Female Red Quick Connect
006_AFT 03136066-01 90 Deg. X 1/4" Tube x 1/8" npt
006_FLO 03130301-01 90 Deg. X 1/4" Tube x 1/8" npt Flow Control
018_FLO 03130460-01 Pack of 5 HD Grid-Lok Module Flow Controllers
005_LEA 03130300-01 Twin Tubing w/ fittings, 5 pcs
005_SFT 03139626-01 5/32" Tube x 10-32 Thread Straight Fitting
005_AFT 03144459-01 5/32" Tube x 10-32 Thread 90 Deg. Fitting
Part No. Description Pin-Lok
010_PIP 03132650-01 Pin in paste jig for a 10” silver module
012_PIP 03131335-01 Pin in paste jig for a 12” gold module
014_PIP 03143235-01 Pin in paste jig for a 14” silver module
018_PIP 03131852-01 Pin in paste jig for a 18” gold module
top related