gas laws. warm up take out your notebook. write the unit topic (gas laws) on a new page. copy down...

GAS LAWS

WARM UP

Take out your notebook. Write the Unit topic (Gas Laws) on a new page. Copy down these topic objectives.

UNIT 6 OBJECTIVES:At the end of this unit I will be able to:

Explain the relationships among pressure, temperature, volume, and quantity of gas – both qualitative and quantitative

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS DATA

TRACKING / RETESTING

UNIT 6 INTRO VOCABULARY BASIC CONCEPTS

KINETIC MOLECULAR THEORY

ANNOUNCEMENTS All missing assignments are now

OVERDUE!!!

That means (from the curriculum) we should be able to:

Identify characteristics of ideal gases. Apply general gas solubility characteristics. Apply the following formulas and concepts of kinetic

molecular theory. 1. 1 mole of any gas at STP=22.4 L 2. Ideal gas equation (PV=nRT), Combined gas law (P1V1/T1 =

P2V2/T2) and applications holding one variable constant: for PV=k, P1V1 = P2V2; for V/T=k, V1/T1= V2/T2; for P/T=k, P1/T1 = P2/T2. Note: Students should be able to derive and use these gas laws, but are not necessarily expected to memorize their names.

3. Avogadro’s law (n/V=k), n1/V1 = n1/V2

4. Dalton’s law (Pt=P1+P2+P3 …)

5. Vapor pressure of water as a function of temperature (conceptually).

Sooooo…

Yessss…it’s a lot of math, but it’s also a lot of fun stuff like: Crushing a soda can using water Inflating balloons without blowing them up Figuring out how to change a gas to a liquid

without cooling it down

UNIT 6 SUBTOPIC 1:

THE KINETIC MOLECULAR

THEORY- Diffusion- States of matter

MATTER

All matter is made up of extremely tiny particles (atoms, molecules, etc).

There are three states of matter. They are solid, liquid and gases.

Particles are constantly moving

Particle Movement Demo

Our aim is to observe how particles move.

At your stations: Place one drop of dye in each beaker of

water. Observe how the color spreads through the

water.

Kinetic Molecular Theory:

Gas particles… are moving constantly and their

movement is random. bump into each other and that collision

affects how and where they move.

The collisions transfer motion and energy

When heat energy is added to a system, the temperature AND speed of the particles increase.

Unit 6 Worksheet 1QUIETLY, Answer questions 1-3.

PRESSURE – a force caused by the collisions between gas particles and the sides of their container

How does pressure cause this to happen?

http://www.youtube.com/watch?v=Bi6sDTXE9TE

So what is the relationship between pressure, volume and number of particles?

Gas Laws DemoPay careful attention and make notes. Party Time, Excellent:

Pressure vs Number of Particles

Hot Air Ballooning: Pressure vs Temperature

Amazing Marshmallows: Pressure vs Volume

Party Time, Excellent: Pressure vs Number of Particles

Compare the number of particles before and after the demonstration. Has the number of particles increased or decreased?

Has pressure increased or decreased? What is the relationship between

pressure and number of particles?

Hot Air Ballooning: Pressure vs Temperature

What happens to the balloon as temperature increases?

What is the relationship between pressure and temperature?

Amazing Marshmallows: Pressure vs Volume

What happens to the volume of the marshmallow as we increase pressure (pushing the syringe down)?

What happens to the volume of the marshmallow as we decrease the pressure (pulling the syringe up)?

Consensus: (Copy the annotated diagrams.)

When the # of particles

increases, pressure

increases.

When temperature increases,

Pressure increases.

When volume increases,

Pressure decreases.

Exit Quiz

If temperature increases, what happens to the state of matter of a solid?

If volume decreases, what happens to the state of matter of a liquid?

If pressure increases, what happens to the state of matter of a liquid?

WARM UP

Do question 1 on the worksheet you received as you came in to class.

Mole boxes on the front desk please!!!

Review Of Yesterday

Solid vs. Liquid vs. Gas Describe Particle Movement

Temperature effects Kinetic Molecular Theory

Gas particle movement Particle interaction Heat

Review Cont.

Expansion and Contraction: Matter heats up Moves faster EXPANDS -

Takes up more space Matter cools down Moves slower

CONTRACTS Takes up less space

The hotter molecules get, the faster molecules move, the further apart they move from each other.

Thermometers: http://www.youtube.com/watch?v=nCQVTTKu0Xc

WARM UP

Collect your progress report, a test and a data analysis sheet.

Complete both sides of your data analysis sheet.

Staple your test and data analysis sheet together.

Make sure to turn in your missing work!!!

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS DATA TRACKING PRESSURE

CONVERSIONS GAS LAWS

COMBINED GAS LAW

IDEAL GAS LAW

ANNOUNCEMENTS All missing assignments are now

OVERDUE!!!

Consensus When drum is heated, the water inside

heats up and evaporates to form water vapor.

When the drum is placed in ice, the water vapor quickly condenses into liquid water.

The rapid condensation reduces the pressure in the drum and the atmospheric pressure is so much greater that it crushes the drum!!

Atmospheric pressure = the pressure exerted by the atmosphere

Volume, Pressure and Temperature Activity

Have one member from your group collect the activity sheet from my desk.

Complete all activities on the sheet When you get to the section where heat

is needed, come to my desk.

How do we measure pressure?(Gas Conversions)

There are several units for pressure, and we can use their equal values to convert from one to the next.

These units include:

Gas Units

kPa kilopascals Used frequently by meteorologists

torr Torr Named after the Italian scientist Evangelista Torricelli

atm atmospheres Sea level is 1 atm

mmHg millimeters of Mercury Hg is the atomic symbol for Mercury

psi pounds per square inch This is what is usually used to measure the air pressure in

a car tire!

How do they relate?

1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

WRITE THESE IN YOUR NOTES!!

Got it?

Let’s use the values you just copied to convert!

DIMENSIONAL ANALYSIS!!! (Just like 1-step conversions!)

EXAMPLE: Convert 12 psi to torr.Step 1 – Write out your units for a conversion

Step 2 – Fill in the numbers

THAT’S IT!

Still scratching your head?

Convert 2.2 atm to kPa.Step 1 – Write out your units for a

conversion

Step 2 – Fill in the numbers

A FEW MORE, REALLY I PROMISE

Convert 844 torr to atm:

Convert 10,450,217 mmHg to torr:

You try!

Answer questions 5 & 6 on Unit 6 Worksheet 1. Do this individually and do not talk to anyone else!

WARM UPConvert 3 atm to:

Torr kPa Psi mmHg

1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS GAS LAWS

COMBINED GAS LAW

IDEAL GAS LAW

ANNOUNCEMENTS Grades may not necessarily be

uploaded because of a PowerSchool glitch. Keep checking back.

Yes!!! I am still collecting missing work!!! TURN IT IN!

Remember the PATCH program? They are looking for male juniors. Visit my website to apply.

Now, how can we determine numerically what the pressure or volume or temperature of a system is?

Use the Gas Laws (see your pink sheet): Charles Law, Boyle’s Law Ideal Gas Law Combined Gas Law etc

Notes: Combined Gas Law

Four variables used in gas law problems:

V = volume of the gas (L) T = temperature (K)

K stands for Kelvin. K = oC+273

n = number of particles (moles)

P = pressure (atmospheres)

Notes: Combined Gas Law

Earlier, we found the relationship between all these variables.

1) Pressure and Temperature are POSITIVELY related (when one goes up, so does the other).

2) Pressure and the number of particles (n) are POSITIVELY related.

3) Pressure and volume are NEGATIVELY related (when one goes up, the other goes down)!!

What does this all boil down to? THE COMBINED GAS LAW!!!

2

22

1

11

T

VP

T

VP

ALERT!! T must ALWAYS be in Degrees KELVIN

(ie celsius +273)

Process of solving a problem

Step 1: Identify which variables the problem gives you. For some problems this will be easy, but you

really have to look through word problems!! Clues—First: initial, beginning, start Clues—Second: then, secondly, after, new Look for the verb! If something is happening, you

have a __________ then ___________ situation.

Step 2: Cross out any variables you don’t need

Step 3: Solve the remaining equation

Examples

The pressure inside of a 5.1 L container is 3.2 atm. The container expands to a volume of 8.8 L. What is the new pressure inside the balloon?

1) P1 = 3.2 atm V1 = 5.1 L P2 = ? V2 = 8.8 L

Step 1: Identify which variables the problem gives you.

Step 2: Cross out any variables you don’t need

Step 3: Solve the remaining equation

Examples

Bria has a 3.2L balloon of hydrogen gas at 23 C. She leaves the balloon in her blazing hot car, and the temperature increases to 72 C. What is the new volume of the balloon?

1) V1 = 3.2 L T1= 23 C V2 = ? T2 = 72 C

You must convert to Kelvin!!!

You must convert to Kelvin!!!

Partner Practice

The pressure inside a 0.83 L hot air balloon is 4.31 atm. If the volume increases to 1.44 L, what is the new pressure inside the balloon?

P1 = 4.31 atm V1 = .83 L P2 = ? V2 = 1.44 L

Partner Practice

A sample of gas occupies of volume of 5.5 L. After being compressed to a volume of 3.9 L, the new temperature of the sample of gas is 273 K. What was the initial temperature of the gas?

V1 = 5.5 L T1= ? V2 = 3.9 L T2 = 273K

You try!

Do #1-7 on Unit 6 Worksheet 2

WARM UP

The temperature inside my refrigerator is about 40 Celsius. If I place a balloon in my fridge that initially has a temperature of 220 C, a volume of 0.5 liters, and a pressure of 3 atm, what will be the volume of the balloon when the pressure decreases to 2 atm and the temperature decreases to 40 Celsius?

V1 = 0.5 L T1=220 C P1= 3 atm V2 = ? T2 = 40 C

P2=2 atm

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS GAS LAWS

COMBINED GAS LAW

IDEAL GAS LAW

ANNOUNCEMENTS Grades may not necessarily be

uploaded because of a PowerSchool glitch. Keep checking back.

Yes!!! I am still collecting missing work!!! TURN IT IN!

Remember the PATCH program? They are looking for male juniors. Visit my website to apply.

Last time we looked at:

The combined gas law:

Today we look at the IDEAL GAS LAW.

2

22

1

11

T

VP

T

VP

Notes: Ideal Gas Law

PV = nRT“piv nert”

This equation is used to predict any of these variables when the others are held constant.• P = pressure (atm)• V = volume (L)• n = number of particles (moles)• T = temperature (KELVIN!)• R = gas constant - 0.0821 L atm

/mole K OR - 8.31 L kPa / mole K OR - 62.4 L mmHg / mole K

When Do I Use Which?

Use “Ideal Gas Law” when solving for a variable and everything is held constant… used “Combined Gas Law” when something is changing and you are asked for “new” pressure, for example.

Think Combined … Change

Let me show you:

.89 moles of a colorless gas occupy a volume of 84.1 L and a pressure of 3.6 atm. What is the temperature of the gas?

Individual Practice

If I have an unknown quantity of gas held at a temperature of 1195 K in a container with a volume of 25 liters and a pressure of 560 atm, how many moles of gas do I have?

Partner Practice

If I have 8 moles of a gas at a pressure of 1.6 atm and a volume of 6 L, what is the temperature?

WARM UP 15 MINUTES

1. A sample of gas at 288 K occupies a volume of 65 L. The gas is compressed to a volume of 48 L. What is the new temperature of the gas?

2. How many torr are there in 304 kPa?3. If I have 4 moles of a gas at a pressure of

1.6 atm and a volume of 6 L, what is the temperature?

PV = nRT1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

2

22

1

11

T

VP

T

VP

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS PROJECT!!! GAS LAWS

DALTON’S LAW GAS

STOICHIOMETRY

ANNOUNCEMENTS

I am still collecting missing work!!! TURN IT IN!

Tomorrow’s tutoring starts at 3pm and ends at 3:30 (I have a meeting after school). Thursday’s tutoring will be the regular time: 2:30 – 3:30.

Would you like to be a PTSA ambassador? See me during the break for details.

SCHEDULE FOR NEXT 7 DAYS:

Monday 11.16:Dalton’s Law; Applications; Practice

Tuesday 11.17: Review Unit 6 Wednesday 11.18: Test Unit 6 Thursday 11.19: Review Units 1-4 Friday 11.20: Review Unit 5 Monday 11.23: CIA Cycle 3 Tuesday 11.24: Icy Hot Lab

PROJECT: SCIENTIFIC DIVERSITY

Due: Monday 11.30.15 Create a product highlighting a

scientist from a country that you are connected to (your birth country, USA, your parents’ birth country, etc).

Your product should include: The scientist’s name; A picture of the scientist; The scientist’s country and flag of that

country The scientist’s major accomplishments /

research; The importance of that scientist’s work; And your connection to the country.

Notes: Partial Pressure

Dalton's Law of Partial Pressure = The pressure of a mixture of gases

is equal to the sum of the pressures of all of the individual gases alone.

PressureTotal = Pressure1 + Pressure2 ... Pressuren

IT’S NOTES TIME!!!

HONORS ONLY: Partial Pressure & Moles

1. A container holds three gases: oxygen, carbon dioxide, and helium. The partial pressures of the three gases are 2.00 atm, 3.00 atm, and 4.00 atm, respectively. What is the total pressure inside the container?

2. A container with two gases, helium and argon, is 30.0% by volume helium. Calculate the partial pressure of helium and argon if the total pressure inside the container is 4.00 atm.

3. A tank contains 480.0 grams of oxygen and 80.00 grams of helium at a total pressure of 7.00 atmospheres. Calculate the following1. How many moles of O2 are in the tank?2. How many moles of He are in the tank?3. Total moles of gas in tank.4. Mole fraction of O2.5. Mole fraction of He.6. Partial pressure of O2.7. Partial pressure of He.

HONORS ONLY: Gas Stoichiometry

1. Ammonium sulfate, an important fertilizer, can be prepared by the reaction of ammonia with sulfuric acid according to the following balanced equation:

2 NH3 (g) + H2SO4 (NH4)2SO4 (aq)

Calculate the volume of NH3 (in liters) needed at 20ºC and 25.0 atm to react with 150 kg of H2SO4.

2. If 45.0 L of natural gas, which is essentially methane (CH4), undergoes complete combustion at 2 atm

and 20ºC, how many grams of each product are formed?

LET’S PRACTICE:

Unit 6 Worksheet 5. Work in groups, on your own, or up front

with me. Whatever you choose, make sure that I

cannot hear your group’s voices.

Turn in the completed worksheet at the end of class.

WARM UP 15 MINUTES

1. A sample of gas at 144 K occupies a volume of 5 L. The gas is compressed to a volume of 3 L. What is the new temperature of the gas?

2. How many torr are there in 152 kPa?3. If I have 2 moles of a gas at a pressure of 16 atm

and a volume of 3 L, what is the temperature? 4. What is the total pressure of a container with

equal amounts of hydrogen and nitrogen if the nitrogen has a pressure of 3 atm?

Pressure total = P1 + P2 + P3…Pn

PV = nRT1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

2

22

1

11

T

VP

T

VP

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS REVIEW & 1-on-

1 MEETINGS Topic Review Practice

ANNOUNCEMENTS

I am still collecting missing work!!! TURN IT IN!

Today’s tutoring starts at 3pm and ends at 3:30 (I have a meeting after school). Thursday’s tutoring will be the regular time: 2:30 – 3:30.

Would you like to be a PTSA ambassador? See me for details.

ANNOUNCEMENTS

U6 (Gas Laws) Test tomorrow. CIA Cycle 3 Test Monday

REVIEW PART 1:

Follow the instructions on your group’s paper to complete a topic review. You will be presenting to the class after 15 minutes.

REVIEW PART 2:

Visit each station Complete at least 3 questions from

each station. You may get help from your

classmates if you get stuck. I will be meeting with you to discuss

your progress while you do your review.

WARM UP 15 MINUTES

1. P1=6atm V1=65L T1=15oC P2=3atmV2=30L T2=???

2. What is the pressure inside a 55L container with 3moles of gas at a temperature of 35oC?

3. How many psi are there in 10 atm?4. What is the total pressure inside a 2L container

at 300K where there are equal amounts of 3 gases, each having a pressure of 7atm?

Pressure total = P1 + P2 + P3…Pn

PV = nRT1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

2

22

1

11

T

VP

T

VP

WARM UP 15 MINUTES

1. P1=600torr V1=65L T1=15oCP2=300torr V2=30L T2=???

(Hint: Convert torr to atm first.)2. A mixture of gases contains 0.5 moles of Neon,

0.396 moles of Argon and 0.714 moles of Xenon. Calculate the partial pressure of the gases if the total pressure is 2 atm at a certain temperature.

(Hint: Use mole fractions.)

Pressure total = P1 + P2 + P3…Pn

PV = nRT1 atm = 760 torr = 101.325 kPa = 760 mmHg = 14.7 psi

2

22

1

11

T

VP

T

VP

AGENDA

EQ: How do different

variables (volume, pressure, temperature, number of particles) affect the movement of gases?

WARM UP ANNOUNCEMEN

TS SYRIAN

REFUGEES TEST

ANNOUNCEMENTS

I am still collecting missing work!!! TURN IT IN! Thursday’s tutoring will be the regular time:

2:30 – 3:30. If you are interested in working as a Vance

PTSA Ambassador, please collect the application form from me. Also let me know what lunch you have. We will start working tomorrow during lunches.

Remember: CIA Cycle 3 Test: Monday 11.23.15 Project Due on Monday 11.30.15

TEST DAY!!! No communication

between students. No phones are allowed (no

headphones either – I should not see your phone out).

You may use the pink reference sheets, pencils / pens, and nothing else!

Write all your answers on the question paper.