fume hood - pt lab technologi...
Post on 25-May-2018
215 Views
Preview:
TRANSCRIPT
Fume Hood FGL Series
Green Product
High durability
NO rusty
Termite resistant
Chemical Resistant
Suitable for any appli-
cation.
Hot Welding process
Simple maintenance
Knock down type
Fume Hood
Activity in the laboratory is a lot of activity that
involves several factors such as chemicals (acids,
alkalis, organic solvents, non-organic solvents,
oxidizing and so on), temperature, humidity and so on.
The use of suitable material is a must in the products
that will be used in the laboratory.
the use of consideration, in addition to match the
laboratory activities, we are also considerations
about the environment. industrial process becomes an
important part in protecting and maintaining the
environment. so the selection of an option-based
plastic material.
The plastic that we use is a special plastic that is
used to contact the strong acids, strong bases,
organic solvents, oxidator and physical properties
suitable for the needs of the laboratory.
FGL Series fume hood is a need to react to a variety
of hazardous chemicals. FGL series has the following
specifications.
Fume Hood
FGL Series
Application:
General laboratory
School
University
Exterernal laboratory
Food industry
Polymer industry
Water laboratory
Environment labora-
tory
PT LAB TECHNOLOGI INDONESIA
JL Swadaya Raya Kp. Muara bers RT 02/04 Suka hati karadenan Cibinong Bogor
Telp. 021 292 10 773 | Fax. 021 292 10 773
Website. Www.labtech-indonesia.com
Specification
Brand LABTECH
Series FGL 12C FGL 16C FGL 18C
Dimension 1200X800X2400 1600X800X2400 1800X800X2400
Material Copolymer Polypropylene material based
Top Table (Optional) Phenolic resin thickness 6 mm
Laboratory Grade solid Phenolic core, high pressure composite panel.
Specifically designed for wet laboratory environments and engineered
to profide maximum chemical and stain resistant characteristic
Baffles weldable (semi- crystalline) thermoplastics polypropylene, smooth
surface, chemical resistant.
Cabinet Storage High Strength polymer polypropylene or Metal powder coating
Electrical requirements 220V, 50 Hz, 1 phase
Fluorecent Lamp favor proof Light output 1025 lm
Direct Centrifugal Fan 0.5 HP-1 Phase 1 HP-3 Phase 1.5 HP-3 Phase
Fan Speed 1400-2800 RPM. Polypropylene Chemical Resistant Impeller and Hosing,
Electric Motor, Knock Down
PVC Ducting Diameter 6", Max 4m Diameter 6", Max 4m Diameter 10", Max 4m
Front Access Door Control for maintenance and adding fixtures
Acrilyc Glass Thicknes 6 mm with frame
Automatic Door Optional Optional Optional
top related