for replacement use · 2015. 5. 10. · vrv iii-q for replacement use enables the system capacity...
Post on 02-Feb-2021
0 Views
Preview:
TRANSCRIPT
-
Dealer
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.
Cautions on product corrosion
Warning Daikin Industries, Ltd.’s products are manufactured for export to numerous countries throughout the world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a particular country. Prior to purchase, please therefore confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation.
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
Specifications, designs and other content appearing in this brochure are current as of August 2010 but subject to change without notice.
JMI-0107 JQA-1452
Organization:DAIKIN INDUSTRIES, LTD.AIR CONDITIONING MANUFACTURING DIVISION
Scope of Registration:THE DESIGN/DEVELOPMENT AND MANUFACTURE OF COMMERCIAL AIR CONDITIONING, HEATING, COOLING, REFRIGERATING EQUIPMENT, COMMERCIAL HEATING EQUIPMENT, RESIDENTIAL AIR CONDITIONING EQUIPMENT, HEAT RECLAIM VENTILATION, AIR CLEANING EQUIPMENT, MARINE TYPE CONTAINER REFRIGERATION UNITS, COMPRESSORS AND VALVES.
Organization:DAIKIN INDUSTRIES(THAILAND) LTD.
Scope of Registration:THE DESIGN/DEVELOPMENTAND MANUFACTURE OF AIR CONDITIONERS AND THE COMPONENTS INCLUDING COMPRESSORS USED FOR THEM
All of the Daikin Group’s business facilities and subsidiaries in Japan are certi�ed under the ISO 14001 international standard for environment management.
All rights reservedPrinted in Vietnam 05/13/005 VK
HEAD OFFICE
VAÊN PHOØNG CHÍNH
CHI NHAÙNH HAØ NOÄI
CHI NHAÙNH ÑAØ NAÜNG
COÂNG TY COÅ PHAÀN VIEÄT KIMUmeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan
Taàng 14-15, toøa nhaø Nam AÙ, 201-203 Caùch Maïng Thaùng 8, P.4, Q.3, TP.HCMTel: (08) 62 504 888 Fax: (08) 62 504 999
Tel: (04) 35 657 677 Fax: (04) 35 657 688
Tel: (0511) 362 4250 Fax: (0511) 362 4251
www.daik in .com.vn
Taàng 12, toøa nhaø Ocean Park Tower, 1 Ñaøo Duy Anh, Quaän Ñoáng Ña, Haø Noäi
Taàng 12, Loâ A2.1, Ñöôøng 30/4, P. Hoøa Cöôøng Baéc, Q. Haûi Chaâu, TP. Ñaø Naüng
PCV1213
FOR REPLACEMENT USE
Cooling Only 50 Hz
1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.
Cautions on product corrosion
Warning Daikin products are manufactured for export to numerous countries throughout the world. Prior to purchase, please confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation.
Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.
Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.
Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.
If you have any enquiries, please contact your local importer, distributor and/or retailer.
JMI-0107 JQA-1452
Organization:DAIKIN INDUSTRIES, LTD.AIR CONDITIONING MANUFACTURING DIVISION
Scope of Registration:THE DESIGN/DEVELOPMENT AND MANUFACTURE OF COMMERCIAL AIR CONDITIONING, HEATING, COOLING, REFRIGERATING EQUIPMENT, HEATING EQUIPMENT, RESIDENTIAL AIR CONDITIONING EQUIPMENT, HEAT RECLAIM VENTILATION, AIR CLEANING EQUIPMENT, COMPRESSORS AND VALVES.
Organization:DAIKIN INDUSTRIES(THAILAND) LTD.
Scope of Registration:THE DESIGN/DEVELOPMENTAND MANUFACTURE OF AIR CONDITIONERS AND THE COMPONENTS INCLUDING COMPRESSORS USED FOR THEM
All of the Daikin Group’s business facilities and subsidiaries in Japan
international standard for environment management.
All rights reservedPrinted in Vietnam 07/12/001 VK
HEAD OFFICE
HNÍHC GNØOHP NÊAV
IÄON ØAH HNÙAHN IHC
GNÜAN ØAÑ HNÙAHN IHC
MIK TÄEIV NÀAHP ÅOC YT GNÂOCUmeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan
MCH.PT ,3.Q ,4.P ,8 gnùahT gnïaM hcùaC 302-102 ,ÙA maN øahn aøot ,51-41 gnàaTTel: (08) 62 504 888 Fax: (08) 62 504 999
Tel: (04) 35 657 677 Fax: (04) 35 657 688
Tel: (0511) 356 1543 Fax: (0511) 356 1526
www.daik in .com.vn
iäoN øaH ,aÑ gnáoÑ näauQ ,hnA yuD oøaÑ 1 ,rewoT kraP naecO øahn aøot ,21 gnàaT
gnüaN øaÑ .PT ,uâahC iûaH näauQ ,hnirT uhC nahP 771
iáohp nâahp ùyl iïaÑ
-
21
Quicker, easier installation of energy-saving air conditioningVRV III-Q for replacement use can be installed using existing refrigerant piping thanks to
its unique refrigerant control system with no special equipment or installation work
required. This enables renovation of the air conditioning system to be carried out quickly
and smoothly and minimises interference with operations and users in the building.
Enables smooth replacement of air conditioning with less effect on operations and users in the building.
Reuse of existing refrigerant piping
Airtightness test
Vacuum drying
Conventional installation process for replacement of air conditioning
Refrigerant recovery and units removalRefrigerant recovery and units removal
Carry-in and installation of units
Airtightness test
Vacuum drying
Quicker installation
Quicker installation
1
2
3
4
5
6
7
8
1
2
3
4
5
Quicker and higher quality installation
Installation processfor replacement with
Introduction
Replace
Replace Replace Replace
QuickQuick QualityQualityThe conceptIn the past, special equipment and work was needed to clean pipes when using existing piping, but this is no longer required. A new function automatically deals with dirt (contamination) inside piping during refrigerant charging, eliminating the work involved in cleaning.
Simple use of existing refrigerant piping.
The exact volume of refrigerant required, which can be difficult to assess for existing piping, is measured automatically. Charging from a gas cylinder with the exact volume necessary supports high-quality installation with fewer problems.
With just a single switch for test operation, refrigerant charging and removal of contamination (dirt inside piping) are carried out at the same time and the exact volume required is determined, simplifying the installation process.
Refrigerant charging completed with just one switch.
Automatic measurement of the exact volume necessary for refrigerant charging.
Removal of existing piping
Installation of new piping and wiring
Refrigerant charging and volume measurement
Test operation
Carry-in and installation of units
Automatic test operation
Reuse of existing piping
After replacement
Before replacement
Automatic refrigerant pipe cleaning
Automatic refrigerant charge
* For reuse of existing refrigerant piping, it is possible to use piping or branched piping capable of handling 3.3 MPa or more. Heat insulation is necessary for liquid piping and gas piping.
* It is possible to keep R-22 indoor units from K-series and later version. It is not possible to combine old R-22 and new R-410A indoor units in one system due to incompatibility of communication.
-
High COP
Benefits of system replacement
Design flexibility
System flexibility
43
Saves energy with high COP An increased number of connectable indoor units in a single system
Enables increased capacity
System can be upgraded using existing piping
Significantly more compact outdoor unit enables the effectiveuse of limited space!
1
Cooling operation (10 HP)
2
3
4
4.27
3.66
2.38 2.37
3005 mm750 mm
1240 mm 765 mm
Compact design enables the effective use of space taken up by existing machinery
More indoor units can be connected in a single system, enabling consolidation of existing piping!
78.4 Pa
ConventionalVRV K PLUS series: RX16K(model from 16 years previous)16 HP outdoor unit
16 HP outdoor unit
58% less space
High external static pressure 78.4 Pa
Up to 64connectable
Before replacement10 HP
16 HP
After replacement
4.0 HP x 4 units
2.5 HP x 4 units
Installation space Installation space
2.25 m2
49.0 Pa 78.4 Pa
0.95 m2
Easier discharge hood connection
(field setting)
Where several systemsused to be required ...
Condensed intoa single system
Reuse of existing piping
We have reached a higher level of efficiency, thanks to advanced features such as the heat exchanger, the grille and the dual DC fans.
The number of connectable indoor units has been drastically increased from 30 to 64.
VRV III-Q for replacement use enables the system capacity to be increased without changing the refrigerant piping. For example, it is possible to install a 16 HP VRV III-Q using the refrigerant piping of an 10 HP R-22 system.
81% increase
Comparison of VRV III-Q and VRV K series
Small and light, significantly reducingconstraints during carry-in
Conventional VRV K series(model from 16 years previous)
External static pressure
Easy installation on each floor for use in tall buildings
Carry-in possible using ordinary elevators
Can be carried on a fork-lift without a pallet
Easy belt suspension
indoor unitsUp to 30connectable
indoor units
ConventionalVRV K PLUS series: RX24–30K(model from 16 years previous)
54% increase
• Cooling operating conditions: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB.
Conventional VRV K seriesRSX8, 10K
(model from 16 years previous)
Cooling operation (8 HP)
Simple to deploy even in long, wide buildings with many small rooms
RQQ8, 10P
: RQQ16P
: RQQ40–48P
Pipe size: 28.6, 12.7
Pipe size: 28.6, 12.7
* For reuse of existing refrigerant piping, it is possible to use piping or branched piping capable of handling 3.3 MPa or more. Heat insulation is necessary for liquid piping and gas piping.
Sang HaRectangle
-
Lineup
Outdoor unit combinations
System lineup for replacement use System lineup for replacement use
65
Outdoor units Indoor units
FXFQ25/32/40/50/63/80/100/125PVE FXZQ20/25/32/40/50MVE
FXDQ20/25/32PBVE(T) FXDQ40/50/63NBVE(T)
FXMQ20/25/32/40/50/63/80/100/125/140PVE
FXMQ200/250MAVEFXHQ32/63/100MAVE
FXCQ20/25/32/40/50/63/80/125MVE
FXKQ25/32/40/63MAVE
30, 32 HP26, 28 HP
42, 44 HP34, 36, 38, 40 HP 46, 48 HP
8, 10,12 HP 14, 16 HP 18, 20, 22, 24 HP
Connection unit seriesFloor Standing Concealed Floor Standing
Ceiling Mounted Cassette Corner
Ceiling Mounted Duct
Ceiling Suspended Cassette
Ceiling Mounted Cassette(Round Flow)
Ceiling Suspended Wall Mounted
Ceiling Mounted Cassette(Double Flow)
900/1,100 mm width type–with drain pump–without drain pump
Slim Ceiling Mounted Duct700 mm width type–with drain pump–without drain pump
Ceiling Mounted Cassette(Compact Multi Flow)
Air treatment equipment
Outdoor-Air Processing Unit Heat Reclaim Ventilator with DX-Coil and Humidifier
Heat Reclaim Ventilator
* It is possible to keep R-22 indoor units from K-series and later version. It is not possible to combine old R-22 and new R-410A indoor units in one
system due to incompatibility of communication.
RQQ8PY1RQQ10PY1RQQ12PY1
RQQ18PY1RQQ20PY1
RQQ14PY1RQQ16PY1
RQQ22PY1RQQ24PY1
RQQ34PY1RQQ36PY1
RQQ42PY1RQQ44PY1
RQQ46PY1RQQ48PY1
RQQ38PY1RQQ40PY1
RQQ26PY1RQQ28PY1
RQQ30PY1RQQ32PY1
FXAQ20/25/32/40/50/63PVE
FXMQ125/200/250MFV1 VKM50/80/100GA(M)V1VAM150/250/350/500/650/800/1000/1500/2000GJVE
FXLQ20/25/32/40/50/63MAVE FXNQ20/25/32/40/50/63MAVE FXUQ71/100/125MAV1Connection unitBEVQ71/100/125/MAVE
Maximum number ofconnectable indoor units
Total capacity index of connectable indoor units*2 *3
Combination (%)
50% 100% 130%
HP Combination
RQQ8PY1
RQQ10PY1
RQQ12PY1
RQQ14PY1
RQQ16PY1
RQQ8PY1 + RQQ10PY1
RQQ8PY1 + RQQ12PY1
RQQ10PY1 + RQQ12PY1
RQQ12PY1 + RQQ12PY1
RQQ10PY1 + RQQ16PY1
RQQ12PY1 + RQQ16PY1
RQQ14PY1 + RQQ16PY1
RQQ16PY1 + RQQ16PY1
RQQ10PY1 + RQQ10PY1 + RQQ14PY1
RQQ10PY1 + RQQ10PY1 + RQQ16PY1
RQQ10PY1 + RQQ12PY1 + RQQ16PY1
RQQ12PY1 + RQQ12PY1 + RQQ16PY1
RQQ10PY1 + RQQ16PY1 + RQQ16PY1
RQQ12PY1 + RQQ16PY1 + RQQ16PY1
RQQ14PY1 + RQQ16PY1 + RQQ16PY1
RQQ16PY1 + RQQ16PY1 + RQQ16PY1
260
325
390
455
520
585
650
715
780
845
910
975
1,040
1,105
1,170
1,235
1,300
1,365
1,430
1,495
1,560
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1,000
1,050
1,100
1,150
1,200
100
125
150
175
200
225
250
275
300
325
350
375
400
425
450
475
500
525
550
575
600
Model name
RQQ8PY1
RQQ10PY1
RQQ12PY1
RQQ14PY1
RQQ16PY1
RQQ18PY1
RQQ20PY1
RQQ22PY1
RQQ24PY1
RQQ26PY1
RQQ28PY1
RQQ30PY1
RQQ32PY1
RQQ34PY1
RQQ36PY1
RQQ38PY1
RQQ40PY1
RQQ42PY1
RQQ44PY1
RQQ46PY1
RQQ48PY1
8 HP
10 HP
12 HP
14 HP
16 HP
18 HP
20 HP
22 HP
24 HP
26 HP
28 HP
30 HP
32 HP
34 HP
36 HP
38 HP
40 HP
42 HP
44 HP
46 HP
48 HP
13
16
19
22
26
29
32
35
39
42
45
48
52
55
58
61
64
Outdoor unit multi connection piping kit*1
–
–
–
–
–
BHFP22P100
BHFP22P151
Capacityindex
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
1,000
1,050
1,100
1,150
1,200
*1 For multiple connections of 18 HP systems and above, the outdoor unit multi connection piping kit (separately sold) is required.*2 Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor units.*3 When outdoor-air processing units and standard indoor units are connected, the total connection capacity index of the outdoor-air processing units must not
exceed 30% of the capacity index of the outdoor units. And the connection ratio must not exceed 100%.
-
Guidelines for reuse of existing refrigerant piping Specifications
Outdoor units
p
q
k
First outdoor branch
fa
b
Firstindoor branch
Multiple use
*The rest of indoor units are the same as for single use.
a
i
s
r
hgf
edcbFirst indoor branch
Single use
Colours in the diagram above are merely for identifying pipes referenced with symbols such as a .
*1 Piping between REFNETs depends on total capacity index of indoor units connected below each REFNET. It cannot exceed piping size of upstream side.*2 Piping from REFNET to indoor unit depends on the capacity of the connected indoor unit. It cannot exceed piping size of upstream side.
Maximumallowablelevel difference
Maximumallowablepiping length
Between the outdoor unitsand the indoor units
Between the indoor units
Between the outdoor units (Multiple use)
Between the first indoor branch and the farthest indoor unit
Between the outdoor branch and the last outdoor unit
Total piping length
Refrigerant piping length
15 m
5 m
—
—
q
s
a+b+c+d+e+f+g+h+i
a+f+g+h+i
f+g+h+i
k+p
150 m 175 m
300 m
40 m
10 m 13 m
Actualpiping length
Equivalentpiping length Example
Level Difference Example
50 m rIf the outdoor unit is above.
If the outdoor unit is below. 40 m r
Reusability of existing piping for VRVIII-Q
Piping limits for reuse of existing piping
8 HP10 HP12 HP14 HP16 HP18 HP20 HP22 HP24 HP26 HP28 HP30 HP32 HP34 HP36 HP38 HP40 HP42 HP44 HP46 HP48 HP
< 100100 ≤ X < 150150 ≤ X < 160160 ≤ X < 200200 ≤ X < 290290 ≤ X < 330330 ≤ X < 420420 ≤ X < 480480 ≤ X < 640640 ≤ X < 900900 ≤ X < 920920 ≤ 20–40 class
50 class63 class80 class
100–125 class140 class200 class250 class
: Piping size of conventional R-22 model: Piping size of conventional R-410A model: Standard piping size of VRVIII-Q
: Possible: Standard piping size of VRV III-Q. However, when equivalent piping length between outdoor unit and indoor unit is 90 m or more, size of main piping must be increased.: Not possible
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
15.9 (Brazing)
28.6 (Brazing)
12.7 (Brazing)
28.6 (Brazing)
87
Cooling Only
Power supply
R-410A
–5 to 43
Hermetically sealed scroll type
Ivory white (5Y7.5/1)
3-phase 4-wire system, 380–415 V, 50 Hz
90.6
19.1 (Brazing)
34.9 (Brazing)
63
355+355
5-100
90.0
Power supply 3-phase 4-wire system, 380–415 V, 50 Hz
R-410A
((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
78,000
310,000
Hermetically sealed scroll type
Ivory white (5Y7.5/1)
233+233
11.7+11.7
15.9 (Brazing)
28.6 (Brazing)
62
218+269
56.2
15.9 (Brazing)
28.6 (Brazing)
63
269+269
61.9
15.9 (Brazing)
34.9 (Brazing)
63
269+269
67.4
19.1 (Brazing)
34.9 (Brazing)
63
269+355
73.5
19.1 (Brazing)
34.9 (Brazing)
63
269+355
79.0
19.1 (Brazing)
34.9 (Brazing)
63
355+355
85.5
(1,680X1,240X765)+(1,680X1,240X765)(1,680X930X765)+(1,680X1,240X765)
8-100 7-100 6-100 6-100 5-100 5-100
55.9 61.5 67.0 73.0 78.5 85.0
((1.4+4.5)X1)+((2.3+4.5)X1)
((2.3+4.5)X1)+((2.3+4.5)X1)
((1.4+4.5)X1)+((2.7+4.5+4.5)X1)
((2.3+4.5)X1)+((2.7+4.5+4.5)X1)
((1.4+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
48,300
192,000
53,200
211,000
58,000
230,000
63,300
251,000
67,900
270,000
73,500
292,000
180+200 185+200 200+200 185+233 200+233 233+233
10.8+11.7 11.7+11.7 11.7+11.7 11.7+11.711.7+11.7 11.7+11.7
15.4 17.8 20.2 21.3 23.7 25.2 27.2
3.6X1 (1.4+4.5)X1
10.8 11.7
218 269
57 58
1,680X930X765
180 185
269
60
200
20-100 14-100
22.5
76,800
19,400
28.2
96,200
24,300
(1.4+4.5+4.5)X1
355
60
233
22.4 28.0
14-100
33.7
115,000
29,000
33.5
10-100
40.2
137,000
34,600
40.0
11.7 11.7
(2.3+4.5)X1
1,680X1,240X765
9.5 (Brazing)
19.1 (Brazing)
9.5 (Brazing)
22.2 (Brazing)
12.7 (Brazing)
28.6 (Brazing)
12.7 (Brazing)
28.6 (Brazing)
5.24 7.64 10.1 11.6
RQQ8PY1 RQQ10PY1 RQQ12PY1 RQQ14PY1
(2.7+4.5+4.5)X1
355
60
233
10-100
45.3
155,000
39,000
45.0
11.7
13.6
RQQ16PY1MODEL
MODEL Combination units
RQQ20PY1 RQQ22PY1
RQQ8PY1RQQ12PY1
(1,680X930X765)+(1,680X930X765)
61
218+269
50.7
9-100
50.4
(3.6X1)+((1.4+4.5)X1)
(3.6X1)+((2.3+4.5)X1)
43,600
173,000
180+185
10.8+11.7
12.9
RQQ18PY1
RQQ8PY1RQQ10PY1
RQQ10PY1RQQ12PY1
RQQ24PY1 RQQ26PY1
RQQ12PY1RQQ12PY1
RQQ10PY1RQQ16PY1
RQQ28PY1 RQQ30PY1
RQQ12PY1RQQ16PY1
RQQ14PY1RQQ16PY1
RQQ32PY1
RQQ16PY1RQQ16PY1
Cooling capacity (*1)(*2) Btu/h(*1)
(*1)kW
(*2)
kcal/h(*1)
Refrigerant
Machine weight kg
dB(A)
Dimensions (HXWXD) mm
m3/min
Capacity control
Compressor
Sound level
Operation range °CDB
Operation range °CDB –5 to 43
%
Power consumption (*2) kW
Power consumption (*2) kW
Airflow rate
Casing colour
Pipingconnections
Motor output kW
Type
Type
Liquid
Gasmm
Cooling capacity (*1)(*2) Btu/h(*1)
(*1)kW
(*2)
kcal/h(*1)
Capacity control
Compressor
%
Casing colour
Motor output kW
Type
Refrigerant
Machine weight kg
dB(A)
Dimensions (HXWXD) mm
m3/min
Sound level
Airflow rate
Pipingconnections
Charge kg
Type
Liquid
Gasmm
Charge kg
6.4 9.5 12.7 15.9Liquid
Piping sizeGas
19.1 22.2 12.7 15.9 19.1 22.2 25.4 28.6 34.9 41.3 54.1
Type of piping
Main piping
From REFNETto REFNET *1
From REFNETto indoor unit*2
Capacity
Note: Specifications are based on the following conditions;•Cooling:(*1) Indoor temp.: 27°CDB, 19.5°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
(*2) Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.
-
109
Cooling Only
19.1 (Brazing)
34.9 (Brazing)
136
19.1 (Brazing)
41.3 (Brazing)
65
355+355+355
3-100
135
Power supply 3-phase 4-wire system, 380–415 V, 50 Hz
R-410A
((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
117,000
464,000
Hermetically sealed scroll type
Ivory white (5Y7.5/1)
233+233+233
11.7+11.7+11.7
19.1 (Brazing)
41.3 (Brazing)
64
269+269+355
102
19.1 (Brazing)
41.3 (Brazing)
65
269+269+355
108
19.1 (Brazing)
41.3 (Brazing)
65
269+269+355
113
19.1 (Brazing)
41.3 (Brazing)
65
269+355+355
119
19.1 (Brazing)
41.3 (Brazing)
65
269+355+355
125
19.1 (Brazing)
41.3 (Brazing)
65
355+355+355
131
(1,680X1,240X765)+(1,680X1,240X765)+(1,680X1,240X765)
(1,680X930X765)+(1,680X1,240X765)+(1,680X1,240X765)
4-100 4-100 4-100 4-100 4-100 3-100
101 107 112 118 124 130
((1.4+4.5)X1)+((2.3+4.5)X1)+
((2.7+4.5+4.5)X1)
((2.3+4.5)X1)+((2.3+4.5)X1)+
((2.7+4.5+4.5)X1)
((1.4+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
((2.3+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
((1.4+4.5+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)
87,700
348,000
92,900
368,000
97,200
386,000
102,000
406,000
108,000
427,000
113,000
447,000
185+185+233 185+200+233 200+200+233 185+233+233 200+233+233 233+233+233
11.7+11.7+11.7 11.7+11.7+11.7 11.7+11.7+11.7 11.7+11.7+11.711.7+11.7+11.7 11.7+11.7+11.7
28.9 31.4 33.8 34.9 35.3 38.8 40.8
MODELCombination units
RQQ36PY1 RQQ38PY1
RQQ10PY1RQQ10PY1RQQ16PY1
(1,680X930X765)+(1,680X930X765)+(1,680X1,240X765)
64
269+269+355
96.6
5-100
96.0
((1.4+4.5)X1)+((1.4+4.5)X1)+
((1.4+4.5+4.5)X1)
((1.4+4.5)X1)+((1.4+4.5)X1)+
((2.7+4.5+4.5)X1)
83,200
329,000
185+185+233
11.7+11.7+11.7
26.9
RQQ34PY1
RQQ10PY1RQQ10PY1RQQ14PY1
RQQ10PY1RQQ12PY1RQQ16PY1
RQQ40PY1 RQQ42PY1
RQQ12PY1RQQ12PY1RQQ16PY1
RQQ10PY1RQQ16PY1RQQ16PY1
RQQ44PY1 RQQ46PY1
RQQ12PY1RQQ16PY1RQQ16PY1
RQQ14PY1RQQ16PY1RQQ16PY1
RQQ48PY1
RQQ16PY1RQQ16PY1RQQ16PY1
–5 to 43
Cooling capacity (*1)(*2) Btu/h(*1)
(*1)kW
(*2)
kcal/h(*1)
Capacity control
Compressor
%
Casing colour
Motor output kW
Type
Refrigerant
Machine weight kg
dB(A)
Dimensions (HXWXD) mm
m3/min
Sound level
Airflow rate
Pipingconnections
Charge kg
Type
Liquid
Gasmm
Specifications Option List
Outdoor units Outdoor units
Control Systems
No.
3
2
REFNET joint
4 Central drain pan kit
Pipe size reducer
REFNET header1
Outdoor unit multi connection piping kit
Distributivepiping
KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T
KHRP26M73TP, KHRP26M73HP
RQQ24PY1RQQ26PY1RQQ28PY1
RQQ30PY1RQQ32PY1
KWC26C280X2 KWC26C450X2
BHFP22P100 BHFP22P151
5 Digital pressure gauge kit BHGP26A1X2 BHGP26A1X3
RQQ34PY1RQQ36PY1RQQ38PY1RQQ40PY1
RQQ42PY1RQQ44PY1
RQQ46PY1RQQ48PY1
KWC26C280X2KWC26C450
KWC26C280KWC26C450
KWC26C280KWC26C450X2
KWC26C450X3
KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)KHRP26M72H (Max. 8 branch), KHRP26M73H (Max. 8 branch)
Type
Item
No.
1REFNET header
REFNET joint
2
KHRP26M22H (Max. 4 branch)KHRP26M33H (Max. 8 branch)
KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)KHRP26M72H (Max. 8 branch)
KHRP26A22T, KHRP26A33T
Outdoor unit multi connection piping kit
RQQ8PY1RQQ10PY1RQQ12PY1
RQQ14PY1RQQ16PY1
RQQ18PY1RQQ20PY1RQQ22PY1
— BHFP22P100
KHRP26A22T, KHRP26A33T, KHRP26A72T
—
3 Central drain pan kit KWC26C450 KWC26C280X2KWC26C280
4 Digital pressure gauge kit BHGP26A1 BHGP26A1X2
Distributivepiping
Type
Item
Building Management System
•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-conditioning systems through LONWORKS® communication.DMS504B514
3
•Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET communication ports. Not usable independently.DAM411B513-1
No. Item Model No. Function
*2 Interface for use in LONWORKS®
•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-conditioning systems through BACnet® communication.DMS502B51
•Additional 64 groups (10 outdoor units) is possible. Max. 7 iTM plus adaptors can be connected to intelligent Touch Manager.DCM601A52
*1 Interface for use in BACnet®
Optional DIII board
KJB411A
•Expansion kit, installed on DMS502B51, to provide 16 more wattmeter pulse input points. Not usable independently.DAM412B51Optional Di board
•8 pairs based on a pair of On/Off input and abnormality input.DEC101A51Di unit2-5
3-2
1-2
1
Electrical box with earth terminal (4 blocks)
DCS601A521-1 •Additional 64 groups (10 outdoor units) is possible.
•Wall embedded switch box.
DCS601C51 •Air-Conditioning management system that can be controlled by a compact all-in-one unit.intelligent Touch Controller DIII-NET plus adaptor
intelligent Touch Controller
Hardware
HardwareBasic
DCM601A51 •Air-conditioning management system that can be controlled by touch screen.intelligent Touch Manager
DCM601A53 •Max. 5 intelligent Touch Managers can be integrated.iTM integrator
HardwareBasic
Option
iTM plus adaptor
•Building energy consumption is visualised. Wasted air-conditioning energy can be found out.DCM008A51iTM energy navigator
•Power consumption of indoor units are calculated based on operation status of the indoor unit andoutdoor unit power consumption measured by kWh metre.DCM002A51
iTM power proportional distribution
2
2-2
2-1
2-4
2-3
Hardware
Software
Option
•4 pairs based on a pair of On/Off input and abnormality input.DEC102A51Dio unit2-6
•Interface between the central monitoring board and central control units.DCS302A525 Unification adaptor forcomputerised control
Air Conditioning Network Service System (Optional Maintenance Service) is also available.
Power consumption (*2) kW
Operation range °CDB
Note: Specifications are based on the following conditions;•Cooling:(*1) Indoor temp.: 27°CDB, 19.5°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.
(*2) Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.
Notes: *1. BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).
*2. LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries. *3. Installation box for adaptor must be obtained locally.
Communication line
Contact/analoguesignal
intelligent Touch Manager
top related