for replacement use · 2015. 5. 10. · vrv iii-q for replacement use enables the system capacity...

Dealer

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.

Cautions on product corrosion

Warning Daikin Industries, Ltd.’s products are manufactured for export to numerous countries throughout the world. Daikin Industries, Ltd. does not have control over which products are exported to and used in a particular country. Prior to purchase, please therefore confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation.

Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.

Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.

Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any enquiries, please contact your local importer, distributor and/or retailer.

Specifications, designs and other content appearing in this brochure are current as of August 2010 but subject to change without notice.

JMI-0107 JQA-1452

Organization:DAIKIN INDUSTRIES, LTD.AIR CONDITIONING MANUFACTURING DIVISION

Scope of Registration:THE DESIGN/DEVELOPMENT AND MANUFACTURE OF COMMERCIAL AIR CONDITIONING, HEATING, COOLING, REFRIGERATING EQUIPMENT, COMMERCIAL HEATING EQUIPMENT, RESIDENTIAL AIR CONDITIONING EQUIPMENT, HEAT RECLAIM VENTILATION, AIR CLEANING EQUIPMENT, MARINE TYPE CONTAINER REFRIGERATION UNITS, COMPRESSORS AND VALVES.

Organization:DAIKIN INDUSTRIES(THAILAND) LTD.

Scope of Registration:THE DESIGN/DEVELOPMENTAND MANUFACTURE OF AIR CONDITIONERS AND THE COMPONENTS INCLUDING COMPRESSORS USED FOR THEM

All of the Daikin Group’s business facilities and subsidiaries in Japan are certi�ed under the ISO 14001 international standard for environment management.

All rights reservedPrinted in Vietnam 05/13/005 VK

HEAD OFFICE

VAÊN PHOØNG CHÍNH

CHI NHAÙNH HAØ NOÄI

CHI NHAÙNH ÑAØ NAÜNG

COÂNG TY COÅ PHAÀN VIEÄT KIMUmeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan

Taàng 14-15, toøa nhaø Nam AÙ, 201-203 Caùch Maïng Thaùng 8, P.4, Q.3, TP.HCMTel: (08) 62 504 888 Fax: (08) 62 504 999

Tel: (04) 35 657 677 Fax: (04) 35 657 688

Tel: (0511) 362 4250 Fax: (0511) 362 4251

www.daik in .com.vn

Taàng 12, toøa nhaø Ocean Park Tower, 1 Ñaøo Duy Anh, Quaän Ñoáng Ña, Haø Noäi

Taàng 12, Loâ A2.1, Ñöôøng 30/4, P. Hoøa Cöôøng Baéc, Q. Haûi Chaâu, TP. Ñaø Naüng

PCV1213

FOR REPLACEMENT USE

Cooling Only 50 Hz

1. Air conditioners should not be installed in areas where corrosive gases, such as acid gas or alkaline gas, are produced.2. If the outdoor unit is to be installed close to the sea shore, direct exposure to the sea breeze should be avoided. If you need to install the outdoor unit close to the sea shore, contact your local distributor.

Cautions on product corrosion

Warning Daikin products are manufactured for export to numerous countries throughout the world. Prior to purchase, please confirm with your local authorised importer, distributor and/or retailer whether this product conforms to the applicable standards, and is suitable for use, in the region where the product will be used. This statement does not purport to exclude, restrict or modify the application of any local legislation.

Ask a qualified installer or contractor to install this product. Do not try to install the product yourself. Improper installation can result in water or refrigerant leakage, electrical shock, fire or explosion.

Use only those parts and accessories supplied or specified by Daikin. Ask a qualified installer or contractor to install those parts and accessories. Use of unauthorised parts and accessories or improper installation of parts and accessories can result in water or refrigerant leakage, electrical shock, fire or explosion.

Read the User's Manual carefully before using this product. The User's Manual provides important safety instructions and warnings. Be sure to follow these instructions and warnings.

If you have any enquiries, please contact your local importer, distributor and/or retailer.

JMI-0107 JQA-1452

Organization:DAIKIN INDUSTRIES, LTD.AIR CONDITIONING MANUFACTURING DIVISION

Scope of Registration:THE DESIGN/DEVELOPMENT AND MANUFACTURE OF COMMERCIAL AIR CONDITIONING, HEATING, COOLING, REFRIGERATING EQUIPMENT, HEATING EQUIPMENT, RESIDENTIAL AIR CONDITIONING EQUIPMENT, HEAT RECLAIM VENTILATION, AIR CLEANING EQUIPMENT, COMPRESSORS AND VALVES.

Organization:DAIKIN INDUSTRIES(THAILAND) LTD.

Scope of Registration:THE DESIGN/DEVELOPMENTAND MANUFACTURE OF AIR CONDITIONERS AND THE COMPONENTS INCLUDING COMPRESSORS USED FOR THEM

All of the Daikin Group’s business facilities and subsidiaries in Japan

international standard for environment management.

All rights reservedPrinted in Vietnam 07/12/001 VK

HEAD OFFICE

HNÍHC GNØOHP NÊAV

IÄON ØAH HNÙAHN IHC

GNÜAN ØAÑ HNÙAHN IHC

MIK TÄEIV NÀAHP ÅOC YT GNÂOCUmeda Center Bldg., 2-4-12, Nakazaki-Nishi, Kita-ku, Osaka, 530-8323 Japan

MCH.PT ,3.Q ,4.P ,8 gnùahT gnïaM hcùaC 302-102 ,ÙA maN øahn aøot ,51-41 gnàaTTel: (08) 62 504 888 Fax: (08) 62 504 999

Tel: (04) 35 657 677 Fax: (04) 35 657 688

Tel: (0511) 356 1543 Fax: (0511) 356 1526

www.daik in .com.vn

iäoN øaH ,aÑ gnáoÑ näauQ ,hnA yuD oøaÑ 1 ,rewoT kraP naecO øahn aøot ,21 gnàaT

gnüaN øaÑ .PT ,uâahC iûaH näauQ ,hnirT uhC nahP 771

iáohp nâahp ùyl iïaÑ

21

Quicker, easier installation of energy-saving air conditioningVRV III-Q for replacement use can be installed using existing refrigerant piping thanks to

its unique refrigerant control system with no special equipment or installation work

required. This enables renovation of the air conditioning system to be carried out quickly

and smoothly and minimises interference with operations and users in the building.

Enables smooth replacement of air conditioning with less effect on operations and users in the building.

Reuse of existing refrigerant piping

Airtightness test

Vacuum drying

Conventional installation process for replacement of air conditioning

Refrigerant recovery and units removalRefrigerant recovery and units removal

Carry-in and installation of units

Airtightness test

Vacuum drying

Quicker installation

Quicker installation

1

2

3

4

5

6

7

8

1

2

3

4

5

Quicker and higher quality installation

Installation processfor replacement with

Introduction

Replace

Replace Replace Replace

QuickQuick QualityQualityThe conceptIn the past, special equipment and work was needed to clean pipes when using existing piping, but this is no longer required. A new function automatically deals with dirt (contamination) inside piping during refrigerant charging, eliminating the work involved in cleaning.

Simple use of existing refrigerant piping.

The exact volume of refrigerant required, which can be difficult to assess for existing piping, is measured automatically. Charging from a gas cylinder with the exact volume necessary supports high-quality installation with fewer problems.

With just a single switch for test operation, refrigerant charging and removal of contamination (dirt inside piping) are carried out at the same time and the exact volume required is determined, simplifying the installation process.

Refrigerant charging completed with just one switch.

Automatic measurement of the exact volume necessary for refrigerant charging.

Removal of existing piping

Installation of new piping and wiring

Refrigerant charging and volume measurement

Test operation

Carry-in and installation of units

Automatic test operation

Reuse of existing piping

After replacement

Before replacement

Automatic refrigerant pipe cleaning

Automatic refrigerant charge

* For reuse of existing refrigerant piping, it is possible to use piping or branched piping capable of handling 3.3 MPa or more. Heat insulation is necessary for liquid piping and gas piping.

* It is possible to keep R-22 indoor units from K-series and later version. It is not possible to combine old R-22 and new R-410A indoor units in one system due to incompatibility of communication.

High COP

Benefits of system replacement

Design flexibility

System flexibility

43

Saves energy with high COP An increased number of connectable indoor units in a single system

Enables increased capacity

System can be upgraded using existing piping

Significantly more compact outdoor unit enables the effectiveuse of limited space!

1

Cooling operation (10 HP)

2

3

4

4.27

3.66

2.38 2.37

3005 mm750 mm

1240 mm 765 mm

Compact design enables the effective use of space taken up by existing machinery

More indoor units can be connected in a single system, enabling consolidation of existing piping!

78.4 Pa

ConventionalVRV K PLUS series: RX16K(model from 16 years previous)16 HP outdoor unit

16 HP outdoor unit

58% less space

High external static pressure 78.4 Pa

Up to 64connectable

Before replacement10 HP

16 HP

After replacement

4.0 HP x 4 units

2.5 HP x 4 units

Installation space Installation space

2.25 m2

49.0 Pa 78.4 Pa

0.95 m2

Easier discharge hood connection

(field setting)

Where several systemsused to be required ...

Condensed intoa single system

Reuse of existing piping

We have reached a higher level of efficiency, thanks to advanced features such as the heat exchanger, the grille and the dual DC fans.

The number of connectable indoor units has been drastically increased from 30 to 64.

VRV III-Q for replacement use enables the system capacity to be increased without changing the refrigerant piping. For example, it is possible to install a 16 HP VRV III-Q using the refrigerant piping of an 10 HP R-22 system.

81% increase

Comparison of VRV III-Q and VRV K series

Small and light, significantly reducingconstraints during carry-in

Conventional VRV K series(model from 16 years previous)

External static pressure

Easy installation on each floor for use in tall buildings

Carry-in possible using ordinary elevators

Can be carried on a fork-lift without a pallet

Easy belt suspension

indoor unitsUp to 30connectable

indoor units

ConventionalVRV K PLUS series: RX24–30K(model from 16 years previous)

54% increase

• Cooling operating conditions: Indoor temp. of 27°CDB, 19°CWB, and outdoor temp. of 35°CDB.

Conventional VRV K seriesRSX8, 10K

(model from 16 years previous)

Cooling operation (8 HP)

Simple to deploy even in long, wide buildings with many small rooms

RQQ8, 10P

: RQQ16P

: RQQ40–48P

Pipe size: 28.6, 12.7

Pipe size: 28.6, 12.7

* For reuse of existing refrigerant piping, it is possible to use piping or branched piping capable of handling 3.3 MPa or more. Heat insulation is necessary for liquid piping and gas piping.

Sang HaRectangle

Lineup

Outdoor unit combinations

System lineup for replacement use System lineup for replacement use

65

Outdoor units Indoor units

FXFQ25/32/40/50/63/80/100/125PVE FXZQ20/25/32/40/50MVE

FXDQ20/25/32PBVE(T) FXDQ40/50/63NBVE(T)

FXMQ20/25/32/40/50/63/80/100/125/140PVE

FXMQ200/250MAVEFXHQ32/63/100MAVE

FXCQ20/25/32/40/50/63/80/125MVE

FXKQ25/32/40/63MAVE

30, 32 HP26, 28 HP

42, 44 HP34, 36, 38, 40 HP 46, 48 HP

8, 10,12 HP 14, 16 HP 18, 20, 22, 24 HP

Connection unit seriesFloor Standing Concealed Floor Standing

Ceiling Mounted Cassette Corner

Ceiling Mounted Duct

Ceiling Suspended Cassette

Ceiling Mounted Cassette(Round Flow)

Ceiling Suspended Wall Mounted

Ceiling Mounted Cassette(Double Flow)

900/1,100 mm width type–with drain pump–without drain pump

Slim Ceiling Mounted Duct700 mm width type–with drain pump–without drain pump

Ceiling Mounted Cassette(Compact Multi Flow)

Air treatment equipment

Outdoor-Air Processing Unit Heat Reclaim Ventilator with DX-Coil and Humidifier

Heat Reclaim Ventilator

* It is possible to keep R-22 indoor units from K-series and later version. It is not possible to combine old R-22 and new R-410A indoor units in one

system due to incompatibility of communication.

RQQ8PY1RQQ10PY1RQQ12PY1

RQQ18PY1RQQ20PY1

RQQ14PY1RQQ16PY1

RQQ22PY1RQQ24PY1

RQQ34PY1RQQ36PY1

RQQ42PY1RQQ44PY1

RQQ46PY1RQQ48PY1

RQQ38PY1RQQ40PY1

RQQ26PY1RQQ28PY1

RQQ30PY1RQQ32PY1

FXAQ20/25/32/40/50/63PVE

FXMQ125/200/250MFV1 VKM50/80/100GA(M)V1VAM150/250/350/500/650/800/1000/1500/2000GJVE

FXLQ20/25/32/40/50/63MAVE FXNQ20/25/32/40/50/63MAVE FXUQ71/100/125MAV1Connection unitBEVQ71/100/125/MAVE

Maximum number ofconnectable indoor units

Total capacity index of connectable indoor units*2 *3

Combination (%)

50% 100% 130%

HP Combination

RQQ8PY1

RQQ10PY1

RQQ12PY1

RQQ14PY1

RQQ16PY1

RQQ8PY1 + RQQ10PY1

RQQ8PY1 + RQQ12PY1

RQQ10PY1 + RQQ12PY1

RQQ12PY1 + RQQ12PY1

RQQ10PY1 + RQQ16PY1

RQQ12PY1 + RQQ16PY1

RQQ14PY1 + RQQ16PY1

RQQ16PY1 + RQQ16PY1

RQQ10PY1 + RQQ10PY1 + RQQ14PY1








260

325

390

455

520

585

650

715

780

845

910

975

1,040

1,105

1,170

1,235

1,300

1,365

1,430

1,495

1,560

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

950

1,000

1,050

1,100

1,150

1,200

100

125

150

175

200

225

250

275

300

325

350

375

400

425

450

475

500

525

550

575

600

Model name

RQQ8PY1

RQQ10PY1

RQQ12PY1

RQQ14PY1

RQQ16PY1

RQQ18PY1

RQQ20PY1

RQQ22PY1

RQQ24PY1

RQQ26PY1

RQQ28PY1

RQQ30PY1

RQQ32PY1

RQQ34PY1

RQQ36PY1

RQQ38PY1

RQQ40PY1

RQQ42PY1

RQQ44PY1

RQQ46PY1

RQQ48PY1

8 HP

10 HP

12 HP

14 HP

16 HP

18 HP

20 HP

22 HP

24 HP

26 HP

28 HP

30 HP

32 HP

34 HP

36 HP

38 HP

40 HP

42 HP

44 HP

46 HP

48 HP

13

16

19

22

26

29

32

35

39

42

45

48

52

55

58

61

64

Outdoor unit multi connection piping kit*1

–

–

–

–

–

BHFP22P100

BHFP22P151

Capacityindex

200

250

300

350

400

450

500

550

600

650

700

750

800

850

900

950

1,000

1,050

1,100

1,150

1,200

*1 For multiple connections of 18 HP systems and above, the outdoor unit multi connection piping kit (separately sold) is required.*2 Total capacity index of connectable indoor units must be 50%–130% of the capacity index of the outdoor units.*3 When outdoor-air processing units and standard indoor units are connected, the total connection capacity index of the outdoor-air processing units must not

exceed 30% of the capacity index of the outdoor units. And the connection ratio must not exceed 100%.

Guidelines for reuse of existing refrigerant piping Specifications

Outdoor units

p

q

k

First outdoor branch

fa

b

Firstindoor branch

Multiple use

*The rest of indoor units are the same as for single use.

a

i

s

r

hgf

edcbFirst indoor branch

Single use

Colours in the diagram above are merely for identifying pipes referenced with symbols such as a .

*1 Piping between REFNETs depends on total capacity index of indoor units connected below each REFNET. It cannot exceed piping size of upstream side.*2 Piping from REFNET to indoor unit depends on the capacity of the connected indoor unit. It cannot exceed piping size of upstream side.

Maximumallowablelevel difference

Maximumallowablepiping length

Between the outdoor unitsand the indoor units

Between the indoor units

Between the outdoor units (Multiple use)

Between the first indoor branch and the farthest indoor unit

Between the outdoor branch and the last outdoor unit

Total piping length

Refrigerant piping length

15 m

5 m

—

—

q

s

a+b+c+d+e+f+g+h+i

a+f+g+h+i

f+g+h+i

k+p

150 m 175 m

300 m

40 m

10 m 13 m

Actualpiping length

Equivalentpiping length Example

Level Difference Example

50 m rIf the outdoor unit is above.

If the outdoor unit is below. 40 m r

Reusability of existing piping for VRVIII-Q

Piping limits for reuse of existing piping

8 HP10 HP12 HP14 HP16 HP18 HP20 HP22 HP24 HP26 HP28 HP30 HP32 HP34 HP36 HP38 HP40 HP42 HP44 HP46 HP48 HP

< 100100 ≤ X < 150150 ≤ X < 160160 ≤ X < 200200 ≤ X < 290290 ≤ X < 330330 ≤ X < 420420 ≤ X < 480480 ≤ X < 640640 ≤ X < 900900 ≤ X < 920920 ≤ 20–40 class

50 class63 class80 class

100–125 class140 class200 class250 class

: Piping size of conventional R-22 model: Piping size of conventional R-410A model: Standard piping size of VRVIII-Q

: Possible: Standard piping size of VRV III-Q. However, when equivalent piping length between outdoor unit and indoor unit is 90 m or more, size of main piping must be increased.: Not possible

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

X

15.9 (Brazing)

28.6 (Brazing)

12.7 (Brazing)

28.6 (Brazing)

87

Cooling Only

Power supply

R-410A

–5 to 43

Hermetically sealed scroll type

Ivory white (5Y7.5/1)

3-phase 4-wire system, 380–415 V, 50 Hz

90.6

19.1 (Brazing)

34.9 (Brazing)

63

355+355

5-100

90.0

Power supply 3-phase 4-wire system, 380–415 V, 50 Hz

R-410A

((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

78,000

310,000



233+233

11.7+11.7

15.9 (Brazing)

28.6 (Brazing)

62

218+269

56.2

15.9 (Brazing)

28.6 (Brazing)

63

269+269

61.9

15.9 (Brazing)

34.9 (Brazing)

63

269+269

67.4

19.1 (Brazing)

34.9 (Brazing)

63

269+355

73.5

19.1 (Brazing)

34.9 (Brazing)

63

269+355

79.0

19.1 (Brazing)

34.9 (Brazing)

63

355+355

85.5

(1,680X1,240X765)+(1,680X1,240X765)(1,680X930X765)+(1,680X1,240X765)

8-100 7-100 6-100 6-100 5-100 5-100

55.9 61.5 67.0 73.0 78.5 85.0

((1.4+4.5)X1)+((2.3+4.5)X1)

((2.3+4.5)X1)+((2.3+4.5)X1)

((1.4+4.5)X1)+((2.7+4.5+4.5)X1)

((2.3+4.5)X1)+((2.7+4.5+4.5)X1)

((1.4+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

48,300

192,000

53,200

211,000

58,000

230,000

63,300

251,000

67,900

270,000

73,500

292,000

180+200 185+200 200+200 185+233 200+233 233+233

10.8+11.7 11.7+11.7 11.7+11.7 11.7+11.711.7+11.7 11.7+11.7

15.4 17.8 20.2 21.3 23.7 25.2 27.2

3.6X1 (1.4+4.5)X1

10.8 11.7

218 269

57 58

1,680X930X765

180 185

269

60

200

20-100 14-100

22.5

76,800

19,400

28.2

96,200

24,300

(1.4+4.5+4.5)X1

355

60

233

22.4 28.0

14-100

33.7

115,000

29,000

33.5

10-100

40.2

137,000

34,600

40.0

11.7 11.7

(2.3+4.5)X1

1,680X1,240X765

9.5 (Brazing)

19.1 (Brazing)

9.5 (Brazing)

22.2 (Brazing)

12.7 (Brazing)

28.6 (Brazing)

12.7 (Brazing)

28.6 (Brazing)

5.24 7.64 10.1 11.6

RQQ8PY1 RQQ10PY1 RQQ12PY1 RQQ14PY1

(2.7+4.5+4.5)X1

355

60

233

10-100

45.3

155,000

39,000

45.0

11.7

13.6

RQQ16PY1MODEL

MODEL Combination units

RQQ20PY1 RQQ22PY1

RQQ8PY1RQQ12PY1

(1,680X930X765)+(1,680X930X765)

61

218+269

50.7

9-100

50.4

(3.6X1)+((1.4+4.5)X1)

(3.6X1)+((2.3+4.5)X1)

43,600

173,000

180+185

10.8+11.7

12.9

RQQ18PY1

RQQ8PY1RQQ10PY1

RQQ10PY1RQQ12PY1

RQQ24PY1 RQQ26PY1

RQQ12PY1RQQ12PY1

RQQ10PY1RQQ16PY1

RQQ28PY1 RQQ30PY1

RQQ12PY1RQQ16PY1

RQQ14PY1RQQ16PY1

RQQ32PY1

RQQ16PY1RQQ16PY1

Cooling capacity (*1)(*2) Btu/h(*1)

(*1)kW

(*2)

kcal/h(*1)

Refrigerant

Machine weight kg

dB(A)

Dimensions (HXWXD) mm

m3/min

Capacity control

Compressor

Sound level

Operation range °CDB

Operation range °CDB –5 to 43

%

Power consumption (*2) kW


Airflow rate

Casing colour

Pipingconnections

Motor output kW

Type

Type

Liquid

Gasmm


(*1)kW

(*2)

kcal/h(*1)

Capacity control

Compressor

%

Casing colour

Motor output kW

Type

Refrigerant

Machine weight kg

dB(A)


m3/min

Sound level

Airflow rate

Pipingconnections

Charge kg

Type

Liquid

Gasmm

Charge kg

6.4 9.5 12.7 15.9Liquid

Piping sizeGas

19.1 22.2 12.7 15.9 19.1 22.2 25.4 28.6 34.9 41.3 54.1

Type of piping

Main piping

From REFNETto REFNET *1

From REFNETto indoor unit*2

Capacity

Note: Specifications are based on the following conditions;•Cooling:(*1) Indoor temp.: 27°CDB, 19.5°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

(*2) Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.

109

Cooling Only

19.1 (Brazing)

34.9 (Brazing)

136

19.1 (Brazing)

41.3 (Brazing)

65

355+355+355

3-100

135

Power supply 3-phase 4-wire system, 380–415 V, 50 Hz

R-410A

((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

117,000

464,000



233+233+233

11.7+11.7+11.7

19.1 (Brazing)

41.3 (Brazing)

64

269+269+355

102

19.1 (Brazing)

41.3 (Brazing)

65

269+269+355

108

19.1 (Brazing)

41.3 (Brazing)

65

269+269+355

113

19.1 (Brazing)

41.3 (Brazing)

65

269+355+355

119

19.1 (Brazing)

41.3 (Brazing)

65

269+355+355

125

19.1 (Brazing)

41.3 (Brazing)

65

355+355+355

131

(1,680X1,240X765)+(1,680X1,240X765)+(1,680X1,240X765)

(1,680X930X765)+(1,680X1,240X765)+(1,680X1,240X765)

4-100 4-100 4-100 4-100 4-100 3-100

101 107 112 118 124 130

((1.4+4.5)X1)+((2.3+4.5)X1)+

((2.7+4.5+4.5)X1)

((2.3+4.5)X1)+((2.3+4.5)X1)+

((2.7+4.5+4.5)X1)

((1.4+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

((2.3+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

((1.4+4.5+4.5)X1)+((2.7+4.5+4.5)X1)+((2.7+4.5+4.5)X1)

87,700

348,000

92,900

368,000

97,200

386,000

102,000

406,000

108,000

427,000

113,000

447,000

185+185+233 185+200+233 200+200+233 185+233+233 200+233+233 233+233+233

11.7+11.7+11.7 11.7+11.7+11.7 11.7+11.7+11.7 11.7+11.7+11.711.7+11.7+11.7 11.7+11.7+11.7

28.9 31.4 33.8 34.9 35.3 38.8 40.8

MODELCombination units

RQQ36PY1 RQQ38PY1


(1,680X930X765)+(1,680X930X765)+(1,680X1,240X765)

64

269+269+355

96.6

5-100

96.0

((1.4+4.5)X1)+((1.4+4.5)X1)+

((1.4+4.5+4.5)X1)

((1.4+4.5)X1)+((1.4+4.5)X1)+

((2.7+4.5+4.5)X1)

83,200

329,000

185+185+233

11.7+11.7+11.7

26.9

RQQ34PY1



RQQ40PY1 RQQ42PY1



RQQ44PY1 RQQ46PY1



RQQ48PY1


–5 to 43


(*1)kW

(*2)

kcal/h(*1)

Capacity control

Compressor

%

Casing colour

Motor output kW

Type

Refrigerant

Machine weight kg

dB(A)


m3/min

Sound level

Airflow rate

Pipingconnections

Charge kg

Type

Liquid

Gasmm

Specifications Option List

Outdoor units Outdoor units

Control Systems

No.

3

2

REFNET joint

4 Central drain pan kit

Pipe size reducer

REFNET header1

Outdoor unit multi connection piping kit

Distributivepiping

KHRP26A22T, KHRP26A33T, KHRP26A72T, KHRP26A73T

KHRP26M73TP, KHRP26M73HP


RQQ30PY1RQQ32PY1

KWC26C280X2 KWC26C450X2

BHFP22P100 BHFP22P151

5 Digital pressure gauge kit BHGP26A1X2 BHGP26A1X3

RQQ34PY1RQQ36PY1RQQ38PY1RQQ40PY1

RQQ42PY1RQQ44PY1

RQQ46PY1RQQ48PY1

KWC26C280X2KWC26C450

KWC26C280KWC26C450

KWC26C280KWC26C450X2

KWC26C450X3

KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)KHRP26M72H (Max. 8 branch), KHRP26M73H (Max. 8 branch)

Type

Item

No.

1REFNET header

REFNET joint

2

KHRP26M22H (Max. 4 branch)KHRP26M33H (Max. 8 branch)

KHRP26M22H (Max. 4 branch), KHRP26M33H (Max. 8 branch)KHRP26M72H (Max. 8 branch)

KHRP26A22T, KHRP26A33T

Outdoor unit multi connection piping kit


RQQ14PY1RQQ16PY1


— BHFP22P100

KHRP26A22T, KHRP26A33T, KHRP26A72T

—

3 Central drain pan kit KWC26C450 KWC26C280X2KWC26C280

4 Digital pressure gauge kit BHGP26A1 BHGP26A1X2

Distributivepiping

Type

Item

Building Management System

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-conditioning systems through LONWORKS® communication.DMS504B514

3

•Expansion kit, installed on DMS502B51, to provide 2 more DIII-NET communication ports. Not usable independently.DAM411B513-1

No. Item Model No. Function

*2 Interface for use in LONWORKS®

•Interface unit to allow communications between VRV and BMS. Operation and monitoring of air-conditioning systems through BACnet® communication.DMS502B51

•Additional 64 groups (10 outdoor units) is possible. Max. 7 iTM plus adaptors can be connected to intelligent Touch Manager.DCM601A52

*1 Interface for use in BACnet®

Optional DIII board

KJB411A

•Expansion kit, installed on DMS502B51, to provide 16 more wattmeter pulse input points. Not usable independently.DAM412B51Optional Di board

•8 pairs based on a pair of On/Off input and abnormality input.DEC101A51Di unit2-5

3-2

1-2

1

Electrical box with earth terminal (4 blocks)

DCS601A521-1 •Additional 64 groups (10 outdoor units) is possible.

•Wall embedded switch box.

DCS601C51 •Air-Conditioning management system that can be controlled by a compact all-in-one unit.intelligent Touch Controller DIII-NET plus adaptor

intelligent Touch Controller

Hardware

HardwareBasic

DCM601A51 •Air-conditioning management system that can be controlled by touch screen.intelligent Touch Manager

DCM601A53 •Max. 5 intelligent Touch Managers can be integrated.iTM integrator

HardwareBasic

Option

iTM plus adaptor

•Building energy consumption is visualised. Wasted air-conditioning energy can be found out.DCM008A51iTM energy navigator

•Power consumption of indoor units are calculated based on operation status of the indoor unit andoutdoor unit power consumption measured by kWh metre.DCM002A51

iTM power proportional distribution

2

2-2

2-1

2-4

2-3

Hardware

Software

Option

•4 pairs based on a pair of On/Off input and abnormality input.DEC102A51Dio unit2-6

•Interface between the central monitoring board and central control units.DCS302A525 Unification adaptor forcomputerised control

Air Conditioning Network Service System (Optional Maintenance Service) is also available.


Operation range °CDB

Note: Specifications are based on the following conditions;•Cooling:(*1) Indoor temp.: 27°CDB, 19.5°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.

(*2) Indoor temp.: 27°CDB, 19°CWB, Outdoor temp.: 35°CDB, Equivalent piping length: 7.5 m, Level difference: 0 m.•Sound level: Anechoic chamber conversion value, measured at a point 1.5 m downward from the unit centre. During actual operation, these values are normally somewhat higher as a result of ambient conditions.

Notes: *1. BACnet® is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE).

*2. LONWORKS® is a trademark of Echelon Corporation registered in the United States and other countries. *3. Installation box for adaptor must be obtained locally.

Communication line

Contact/analoguesignal

intelligent Touch Manager

for replacement use · 2015. 5. 10. · vrv iii-q for replacement use enables the system capacity...

Documents