falcon iii booklet - hobbicomanuals.hobbico.com/gbg/gbga0050-manual.pdf · using this instruction...

FALCON III

©copyright 1992

2

3

4

Sheet 5001 B (1 Req’d)

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

3. When all the parts are ready for hinging thenre-mount the hinge with a pin inserted in thecenter. when satisfied that all parts are alignedproperly, remove pin. Apply 3 to 4 drops of thinCA glue to the exposed hinge line. Turn overand apply another 3 to 4 drops to the hinge lineof the other surface.

Allow 10 minutes for the CA to cure, beforeflexing the surface.

Work the surface up and down to remove anystiffness you may feel.

23

24

25

26

For your next model kit, consider the Anniversary Edition Piper Cub, a realistic model that assem-bles quickly, and includes cowling, engine detail, windows, engine mount, and complete hardware.Build either the full length wing, for a scale-like floater, or the “clipped” wing, for an aerobatic thriller.

The Super Chipmunk is a terrific first low-wing model. All the thrills without the chills! Turn it looseand this easy to handle Sunday flyer will put on an airshow with all the flash and flair of its full-sizecousin. Optional flaps offer an added dimension of realism. Kit includes cowl, wheel pants, full-colordecals, and complete hardware.

CARL GOLDBERG PRODUCTS,Ltd.P.O. Box 818 4462 Oakwood Road Oakwood GA 30566

Phone # 678-450-0085 Fax # 770-532-2163 www.carlgoldbergproducts.com