exercise lecture 7 completing exercise - lecture 6 1.create your own blocks 2.insert blocks to your...
Post on 19-Jan-2016
215 Views
Preview:
TRANSCRIPT
Exercise Lecture 7
Completing Exercise - Lecture 6
1.Create Your Own Blocks
2.Insert Blocks to Your New Drawing
3.Using Different Hatching Types
Create new drawing named (My Blocks), Change drawing units to be metric, Draw door & window and create door and window blocks, Open Design Center and go to Home Designer then create tool
palette Insert the following blocks from these palettes.
Create Your Own Blocks
Insert Blocks to Your New Drawing
Open your previous (Ground Floor Plan) drawing,
Insert doors and windows blocks from (My Blocks) Drawing,
Align them in their suitable places,
Insert bathroom blocks as shown in the following drawing,
Using Different Hatching Types
Create new layer (Hatch),
Use suitable hatching types for Bath and Balcony spaces as shown in the following drawing.
top related