enterpriseone xe product costing and manufacturing accounting

Post on 01-Jan-2017

215 Views

Category:

Documents

2 Downloads

Preview:

Click to see full reader

TRANSCRIPT

EnterpriseOne XeProduct Costing and Manufacturing Accounting PeopleBook

September 2000

J.D. Edwards World Source Company

7601 Technology Way

Denver, CO 80237

Portions of this document were reproduced from material prepared by J.D. Edwards.

Copyright J.D. Edwards World Source Company, 2000

All Rights Reserved

SKU XeEAMA

J.D. Edwards is a registered trademark of J.D. Edwards & Company. The names of all other products and services of J.D. Edwards used herein are trademarks or registered trademarks of J.D. Edwards World Source Company.

All other product names used are trademarks or registered trademarks of their respective owners.

The information in this guide is confidential and a proprietary trade secret of J.D. Edwards World Source Company. It may not be copied, distributed, or disclosed without prior written permission. This guide is subject to change without notice and does not represent a commitment on the part of J.D. Edwards & Company and/or its subsidiaries. The software described in this guide is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement. J.D. Edwards World Source Company uses automatic software disabling routines to monitor the license agreement. For more details about these routines, please refer to the technical product documentation.

OneWorld Xe (09/00)

Table of Contents

Overviews 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -���#������"�� $' ������������������������������������������������������������������������������������������

-���#�����"�����#�����������# $' �������������������������������������������������������#��������#"�����#�� $'2������������������������������������������������������������������(�#�� ���#"�����#�� $'&�����������������������������������������������������������������������3#��� �4����#�����*���# $'&���������������������������������������������������������������� �"�� $'!������������������������������������������������������������������������������������������

-����#��(�#"��5����������#"#"���(����#��� $'!������������������������������������������6����#���#"�������7���+��#�"���(�����#"�������"�� $'$$����������������������

��#���-�#���#"�� $'$$������������������������������������������������������������������������������������1��#�� $'$ ������������������������������������������������������������������������������������������������������6����#���#"��������#������(�����#"���-�#���#"�� $'$8������������������������(�#�� �(�����#"���-�#���#"�� $'$2����������������������������������������������������������������(��"��"����++��#"�����#�7��������# $'$&��������������������������������������������������

���"���#"���.�#������#����������(�#�� ���#"�� $'$!��������������������. � $'$���������������������������������������������������������������������������������������������������������7��������"�� $'�$����������������������������������������������������������������������������������������

6����#���#"�� $'�$����������������������������������������������������������������������������������1�#�6�#��������� $'�$������������������������������������������������������������������

7���+��#�"���(�����#"�� $'������������������������������������������������������������������1�#�6�#��������� $'��������������������������������������������������������������������

Setup

Product Costing and Manufacturing Accounting Setup 2–1. . . . . . . . . 9���#���"���9����+"�������� �' ��������������������������������������������������������������

�3��� �5���##"���9����#�:��*�#������+����#���:" ��+�7�#�"� �'2��##"���9����#"���-�+���#"�� �'!��������������������������������������������������������������������

��##"���9��(�����#"�����#�;���#"#"��+���#��������# �'!������������������##"���9��-#�����#�<��� �'%����������������������������������������������������������������������##"���9��7�#����������#�+��-#�� �'$�������������������������������������������������

6���"�����#"���+����#�)��""�� �'$&����������������������������������������������##"���9��7���+��#�"������#��# �'$&��������������������������������������������������������##"�������#������)�#������1��#������ �'��������������������������������������������("��"���=� ���#��9����+"������#���������# �'�&��������������������������

��##"���9���"�� �#���)�#��+����*����#� �' $����������������������������������������������

��##"���9��>���� �<������ ������ �' 2������������������������������������������������������

)��"��"���7���+��#�"���((- �' %����������������������������������������������������������������������

6���"�����#"���+��7���+��#�"���((- �'82����������������������������������

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

Costing 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ���#�"��#��������#"��? '��������������������������������������������������������������������������"�� �#�������1�@�����# ' �������������������������������������������������������������������#�"�(�#�� ���#"��? ' �������������������������������������������������������������������������������#�(����#���������#? '8������������������������������������������������������������������

)��"��"���:" ��+�7�#�"� �����)��#"�� '2����������������������������������������������������

)��"��"�����#"���"��:" ��+�7�#�"� '2����������������������������������������������������)��"��"���)��#"���-�+���#"�� '���������������������������������������������������������������

���#"����"�� �#�����# '$ ��������������������������������������������������������������������������������

���#"���#�����#"����3���#"���)���# '$8������������������������������������������������6���"�����#"���+����#"����3���#"�� '$&������������������������������������

���#"������"�� �#���)� �� '$&������������������������������������������������������������������������ �#"���A"� � '$!������������������������������������������������������������������������������������#"������� '$!����������������������������������������������������������������������������������7�#��)��#"�� '$�����������������������������������������������������������������������������������9�"#��+�7����������"�� '$�������������������������������������������������������������

6���"�����#"��5���#��"�� �#"�� '$���������������������������������������������������������*"����"#���"�� �#�����#���������# '� ��������������������������������������������������

)��"��"�������)��""����"�� �#�����#���������# '� ������������������������6���"�����#"���+����#���������# '�!��������������������������������������

)��"��"���#�����#��"�� �#"���)���# '����������������������������������������������������)��"��"�����#���:" ��+�7�#�"� '����������������������������������������������������������6���"�����#"���+����#���:" ��+�7�#�"� �B6 ���&C ' 2��������������������)��"��"�������#���)��#"�� ' &��������������������������������������������������������������������

6���"�����#"���+����#���)��#"���-�D�"� '8�����������������������������9���#"���1�@�����# '8$������������������������������������������������������������������������������������

6���"�����#"���+��1�@���9���#��B) �� 2C '88����������������������������������)��"��"�����#"���-�+���#"�� '8!��������������������������������������������������������������������

)��"��"���1�@�����#���������# '8!������������������������������������������������������)��"��"���#���-#���<���� '8%����������������������������������������������������������������������

6���"�����#"���+��-#���<�����-�D�"� '2$����������������������������������)��"��"���#����"�� ��<��� ���#���:" ��+�7�#�"� �)���# '2$������������������

6���"�����#"���+����#���:" ��+�7�#�"� �)���# '2�������������������)��"��"���#���7� #"E<��� ���#���:" ��+�7�#�"� �)���# '2�������������������

6���"�����#"���+��7� #"E<��� ���#���:" �)���# '2 ������������������)��"��"���#�����#���������#�)���# '28����������������������������������������������

6���"�����#"���+����#���������#�)���# '28��������������������������)��"��"���#�����#���������#0<�����-�#��"#��)���# '22��������������������

6���"�����#"���+����#���������#0<�����-�#��"#� '22������������*"����"#��(��"#"��� ���#"���1��#�� '2!��������������������������������������������������

����"�����# '2!������������������������������������������������������������������������������������������6���"�����#"���+���������#�=� �� '2���������������������������������������

����"���1�@�����#�#���"�� �#�����# '2���������������������������������������������6���"�����#"���+����#��"�� �#"���)�+�� '2�����������������������������

9���#"����� ������6"���������# '2%����������������������������������������������������6���"�����#"���+��9���#���� ������6"��0��# '2%����������������

9���#"���6����#���# '&�����������������������������������������������������������������������������6���"�����#"���+����������#�7�"�#������ '& ��������������������������

�����"���-#�����#�<��� '& ����������������������������������������������������������������������6���"�����#"���+��-#�����#�<��� ������"�� '&8����������������������

Table of Contents

OneWorld Xe (09/00)

(�� �"����3#����#�+��7���+��#�"���(�#�� ���#"�� '&2����������������������������

��*"����"#���#��������#"���"���)63����"�����# '&!����������������������������

9���#���"���:�#���6����#���#"�� '&���������������������������������������������������9���#���"�����#"���+��F"#�-#�� '&��������������������������������������������������������#��������#"���+�����+"�����-#�� '&%��������������������������������������������������

�3��� �5���#"��������+"�����-#�� '!�������������������������������������������������*"����"#���#��������#"���"��6����7���+��#�"�� '!$������������������

)��"��"���6����#���#"���+��6���� '! ��������������������������������������)��"��"���6����#���#"���+��-����"��# '!8������������������������������������)��"��"���6����#���#"���+����E0:�E6����# '!&��������������������������

�3��� �5�1��#�����#�6����#�������E0:�E6����#���#"�� '!&�3��� �5��3#����#�+����E0:�E6����# '!&������������������������������

)��"��"�������#���6��� '��������������������������������������������������������������6���"�����#"���+����#���)��#"��06����-�D�"� '������������������##"���9��#�����E0:�E6����#�6 ���"�����. � '������������������������������

)��"��"���6����#���#"���+��6����#�:" ��+�7�#�"� '%���������������������

Daily

Manufacturing Accounting 4–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (�����#"���1�������#� 8'&������������������������������������������������������������������������

����(�����#"����D��#"�� 8'&���������������������������������������������������������������������#�-�#������#��+�(�����#? 8'!��������������������������������������������������������������(�����#�����(�����#�4��.� 8'����������������������������������������������������������������#�-���. �����(�����#"��? 8'$$��������������������������������������������������������������

��. ��������� 8'$���������������������������������������������������������������������������������6�#"�����"#����� 8'$�����������������������������������������������������������������������������

�E(�����# 8'$ ������������������������������������������������������������������������������������������������>���� �<����������#"�� 8'$8������������������������������������������������������������

���#�(��7���+��#�"���=�"����? 8'$2�����������������������������������������������������������#"���1 ���+��7���+��#�"���(�����#"�� 8'$!����������������������������������

9���#���"�����*�����"��(�����#"�� 8'$%������������������������������������������������

(.��#�#���6�#�<"#�����)��#"�� 8'$%�������������������������������������������������������������#��������#"�� 8'����������������������������������������������������������������������������������(�#�� ���#"�� 8'��������������������������������������������������������������������������������������

���#�G�����������A���)��"������*����? 8'�$�����������������������������������#�(��9�������#���9�"#? 8'�$�������������������������������������������������������������������#�G�����������A���-���7�#�"� ? 8'�������������������������������������������������#�G�����������A���)�����G�������;���#"#"�? 8'� ������������������

�#��������#"�� 8'�8��������������������������������������������������������������������������������(�#�� ���#"�� 8'�8������������������������������������������������������������������������������������

���#�G�����������A���)���"�����#"�������#"��? 8'�8�����������������������#�G�����������A���)�������������#�����? 8'�2���������������������������#�G�����������A���)��������� �#"��? 8'�2����������������������������������

�#��������#"�� 8'�&��������������������������������������������������������������������������������(�#�� ���#"�� 8'�&������������������������������������������������������������������������������������

���#"�������� ���#"� 8'�!����������������������������������������������������������������������������������

9���#���"�������� ���#"������#�������E�"��6��� 8'�!������������������#�" ����������������� ���#"� 8'�%������������������������������������������������

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

���#"�������� ���#"��+����*�"��6���������� �#"�� 8' ��������������#������(�����#"�� 8' $��������������������������������������������������������������������������(�#�� �(�����#"�� 8' �������������������������������������������������������������������������������

6���"�����#"���+������� ���#"��+���-6������� �#"���B) $���C 8' �����������������������������������������������������������������������������������������������������)��"��"���6����#"�����# 8' &��������������������������������������������������������������������

6���"�����#"���+��6����#"�����#�-�D�"� 8' %�������������������������������#"�������� ���#"��+��=�"���� 8'8�����������������������������������������������������

�#��������#"�� 8'8���������������������������������������������������������������������������������(�#�� ���#"�� 8'8�������������������������������������������������������������������������������������

6���"�����#"���+������� ���#"��+��=�"�����B) $��8C 8'8$����������)��"��"���>���� �<�����:�#��� 8'82��������������������������������������������������������������

6�#"���#��#���>���� �<���� 8'8%����������������������������������������������������������������������

6�#"���7���+��#�"�������� ���#"� 8'8%��������������������������������������������������6���#�6��� 8'2�����������������������������������������������������������������������������������6�#�6��� 8'2�����������������������������������������������������������������������������������������

6�#"�����"#�)���# 8'2�����������������������������������������������������������������������6�#"�������� �)���# 8'2 ����������������������������������������������������������������

6���"�����#"���+��6�#�>���� �<���� 8'2 ����������������������������������)��"��"���#���-#���<����0(�����#�-�#��"#��)���# 8'22��������������������������

6���"�����#"���+��-#���<����0(�����#�-�#��"#� 8'2&����������������)��"��"���)���#�+��7���+��#�"���(�����#"�� 8'2&������������������������������

)��"��"�����*�����(�#"�"#��.�(����# 8'2!������������������������������������)��"��"�����*�����(�#"�"#��.��9�"# 8'2!����������������������������������������)��"��"������"���"���=�"���� 8'2!����������������������������������������������������)��"��"���6 ������=�"���� 8'2!����������������������������������������������������������)��"��"����++"�"�����=�"���� 8'2���������������������������������������������������������)��"��"�����#� 0�-6������#���=�"���� 8'2�������������������������������������)��"��"������� �#�����*�����=� ��#"�� 8'2���������������������������������)��"��"�����*�����(����#�=�"���� 8'2%��������������������������������������)��"��"���(�����#"����������B� ������*����C 8'2%��������������)��"��"���6������6"���=�"���� 8'2%��������������������������������������������������)��"��"���7�#�"� �9����=�"���� 8'&�������������������������������������������������)��"��"���<�.��)�#��=�"���� 8'&$��������������������������������������������������������)��"��"�����*�����<�.���++"�"���� 8'&$����������������������������������������

Appendices

Appendices A–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (�����"3�(5��� �� �#"���"����#�)� �� (' ����������������������������������������������������

(�����"3�:5�6������6"���=�"���� :'$����������������������������������������������������������

�3��� �5�6������6"���=�"���������7�#�"� �:���� :'$��������������������

Index

1–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Overviews

6����#���#"���"����"���#��#���#��+�����+"#�. ������+��#�"������"�����#�(+#�������������#��"�������#����������������" ����#����������#�� ��#"�����#��������������#��������"�� ����#���������+��#�"���������#"���#���

����"������"#��+�#���+� ��"���#��"�5

� -���#������"��

� 6����#���#"�����������+��#�"���������#"�������"��

Product Costing and Manufacturing Accounting

1–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Industry Overview

��"�����#��"�#����������#��#���"���#��������#����"�#����"#�������#��#"�����������+��#�"���������#"����-�����"#"����#�"�����#����# "������� "���"�����#�"�������#���#"�����������+��#�"���������#"�������� �������������� �#"���#������-����#��(�#"���

����"���#������"������"#��+5

� -���#�����"�����#�����������#

� -����#��(�#"��5����������#"#"���(����#���

Industry Environment and Concepts

="#�� �����������"@�#"�����#������+�������#� �D��#"��������5�(��������#"����#�����+"#����� �?�(���������+"#�. ���������� ��.�?��������#����D��#"�����������"@�#"�����#����������#����+���#�. "�"���#�����#��+��"���.�"����������"����� ��� �����������#����+��#��*"���#������##��#��"����"�#���+���#"������"����"����������+������"������#�����#��������"�#����������#����+������#"�����#�#��#��"��#�.����#��+������"#��#�������"@�#"��H�� ���

���"#"��� �������"@�#"��������.�����#����"������#�������"#"��#�+���#"��� ������-�+���#"���"��.#�"����+�����������"��#�������"@�#"�������+������� ����������#��"������#���"#���#����������"��#"��������#���+���#"��� ����������������� ��.���+"#�+��������"�+���#"���#������#������++"�"��# ������"���"�+���#"�������������#���#���������"������"���"�������+��#�"������"���"����"���#"� ����"���"���������#"���� ���"��������#"������#� ������D�� "#�����������#����"����� ��. ����E+���#"��� "�#���#"���#��#��"��#��� #�"�����#�������������������������#���#�

7���������"@�#"���������+"�"��������+"�"�������"�+���#"���"��������"#�"��#�����#��"�H�#��#���������������"���� ����##��#"���#����*"��"�+���#"������" �. ������+���#"��� �.�����"����������"��#"���"�+���#"��#������#���#������#"�� � ��� ��7�*�#������#"#"�������"������#�.�"����#���� �@������#���������������#"���������*������++"�"��#������+��##"������#��*"�������������"����������( ��+�#������#"�"#"��� #"��#� ���++��#�#��.�##��� "����(������"@�#"��������#�������#�����#��+���"���.�"���"+�"#������#�*�����������������#�����#���������#���

Product Costing and Manufacturing Accounting

1–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����"@�#"�������� "@"���#��#�� �.� ������#"#"������������"����*�#��������������������#���+�����+������.�"������#"����7�#�.�"�����#"�"#"����#.��+ �3". ���������������#��#"� �� ������*�#����������"@�#"�����#.������������+�#�#��"��������#��#�#��������+�������#���I"��"+"���#�+��J#�*������"+#�+���������+���#������"�"���I#"�"� �����J��������#� �;�� "#�7��������#�#�� ����"��������"���"�#������+��������������#��#"� ���������.����"��������������#�������#������"���#"����#�#"#"�� ��������#� ��#��*"�����#������������� ���� �"��"#�����"@�#"���"��+���"���������#��#�������*�����"++������"��"����"�������#"��������������������"#"�� ���++��#�#�������"@�#"��H���#������"�������." "#������#������"@�#"��H�+"����"� �.�##��� "���

1�����+"����"� �#�����"�#���������"@�#"�����*"���#��"������"#�.�##��� "����#�����������#����#�" ���"�+���#"���+��"��"�"��� ������#���#�����"�+���#"�����#�.��.�*��������#����"�����#���������#� ��� �#�����#���������������#"�"#���++��#���#���������#����������������#"�"#������"�#� ��

��������#".�#"��������"#�"���������"@�#"�����#�.������". ��+��#���#�#� ��#��+�#�����#"�"#"��#��#�#������������#���1���3��� ���#���"�"#"� ���#��+���"#����"��#�.�������."��#"����+�#���+� ��"�����#��"�����"#"���#��#�����#�� �"#����#5

� ���� "����#

� 6����#"�����#

� ����������#

� �����#�#"�����#

� ���"�����#

(�������+�����"�������#"����"#�"��������+��#�"�������������#�����#������"�#����"#��#��#�"#�������������#"���#��#�������+���������"�#����#�#��#����������#�����������������#�+��"��#������� �������#�����#��+#���"#���

�������#������+"����������"��#������"���#�� �#�����"#������#�����#����"#".�#���������#�������#"��������7���+��#�"���������#"������"+"�� ����"#����#������#�����"�����"�������+��#�"�����#"�"#"���������"�����������#��"#����#�� �#�����������#�� ��� #�#���3���#����� #�

������#��������#�����#��.�� "�����#�+�������"���������"�#��#�����������#���#"�����#�����:�����"+�"�����#��������#�+���������#���"�����������"����"�����#���������#��������#��"�����.�����#��A�������������#�"�.�����#�#��#�����#�� ���#��+�#��������#��+#����������+"�"��������+��#�"���"#�������� #��+�#��������"���� ������������#�#����������#���#���#�*������� "������"��������#"�������"#�"��#��������+����#�#��������#H���#���� �������.�����A�������#����.��"��#��"������������"+"����#������"�����(������"@�#"���"����. ��#���� ���"������"��"+�"#�������#�*�������#���#����"��� �������������#����"�"��#���

Industry Overview

1–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����������"#�"��#�������"@�#"���#��#��++��#�#�����#��+�#��������#���#�.�"��� ����"����#��"�"���������� ��#"���#������#��A�����#�#������#��"����"�����#������� ���#��#���"#���������"��������#��A������ ��#����� "�"��#�#������#�#��#������#������� ���#�����"#���������������� ��.������". ��+�#�����#�#��#������"����+���#��#����H���#"�"#���)����"���#�����#��+���"��.�"����+ ��#��"��# �����#���.�##��� "����+�#�������"@�#"������#��"�E�"��#����"D���+����#������#"����������/�#E"�E#"�����#���� ��"�������� ���#�"��#����#��#��#��++��#�#�����#��+�#��������#�#��#�����#������������"@�#"��H���� �"�#����������#���"#�"��������.������"�����E�� ��E������#�*����"�#��"�� ���� #�"������������� ���#��������� #"��#� ��������#��������#H���#�#��#�����#����

�"#��#���"������������#�����"#����#������"@�#"����������������"��+�#��*"���#����3���#�����#��+�"#������� ���#�����#�� ���#�#��#����"������#��������#"�"#���������3���#���������#�� ���#����*��������������������#����#��"���#"+������+��"��������#��A�������#������#�������"�#��� ���#�������#��� ���#���#�#��#�����������"��������+"#�." "#���������"�#�"�����������"#H���"#"���"��#�����*�#� ����

Standard Costing Systems

����"@�#"���#��#����#��������#"����#�������#��*����"+"����#�+ ��+��������"����������#"���#��"����#�������"�� ���#����3���#�����#��+ �.�����#�"� �����������������.��������"#������"�#����"D���"��"++���#+���#���#����"D����+���#"�"#�E.������#"������"����������#���#���#����#"�"#��"������� "������#���#��������#��"����#��������#���"#��#�������#"������������#�. "�����#���#"��#�#����#��"���#"+��� ���#���������#�#���"��"�"��� ���#�#��#���*��������"#��H���#�����"�� ���#����#����� �� �#���#�"� �� �.�����������������#��>���� ����������"@�#"���+"���"#�������#�������"@���3#����#�#��#���#�� ��.���� �� �#����������#� ���������� ��#"�"#������� #����#������#�#� ��+�� ��+�#������#�"�#�����#"���.�� "����������#���������#������ �+� �"��� ���"���+�#���#�#��"����� �����#����#"����#��"��

(+#���������� �#�������#"�����#"�"#"�������"���#"+����"�����.�#�����#������#��"����#��������#�����#����� ����#�. "����#�������#�#�������#"�������������� �������+���"���������.��"���#"+"����1���3��� ������"�������� �������#��"������"��.�#�����#����"�"�� �+�@���B�3���#��C#�������� �������#���." ��+���#�"� ���#�#��#��"��#��3"#����#"����+#��#��+�@������������#�. "�������"�"�*�������������"���"�����"������A������� ���������#���." ��+���#�"� �#��#�����#� "#�#��#�"������#���+������*�����(���#���"�����.�#�����#����#���"�*���������� ��������"�����(��#�����"������"��#�.��.�#�����#�����*����H��"�"�� ���#� "#�����#��+"�� � "#��+������#�"����#��#�����*��������"�"�*�������#�����#�� ��"�������������"����������"���� ������������#�#������#���������"������"�������"�������#"��������"���#"+������#��#��"��#��D�"��+�#�����#� ���#��������#"���"�"��� �+�����#"#"������#�E.��������+��#�"��"���#"������� ���+���"��#���������������+��#�"����������#�. "����#�����#�����.��#��*���#�������#�#��� "+����� ���+�#��������#��������#+��" ��

Product Costing and Manufacturing Accounting

1–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Actual Costing Systems

����"@�#"���#��#�������#�����������#"���.��#��*"�����#�� ���#�+����#"��������������"@��#��������#�����"#����#���#�������"������(�#�� ���#"����������#��"������#���������#��.�#�#�����#��������� �#����#�#���#"���#��#�#���������#�������#�#��������#"��������=�"�����.�#�����#����#"��#�����#�����#�����#�� ���#������#��3"#�.�����#�����#�� ���#�"����#"��� ������#���#��.������#�����#�����#��� �#����+��#������#����#"������ �"�����"�� ������#�"� ����� �.����#���#��������� �#���1������+��#�"������"�����#���������*�E#�E���������. �E#�E�����#�"��""." "#��"�"���#��#�.�������+�#�����"." "#��#��#���#����� "���. ��"#������"���#"�� ��:����������������#��"��#�����+�������#�����+��#����"��#�����#����#��������#�.������������#"����"#���"��#�.��"���". ��#����#��"�����#���+��#��#��#�"�+ ���������#���������"@�#"������"���#�������#�� ���#"���"�#�����+�#��������#"���"�� ����#������+�������"#��"#�����������#��"��#��������#��# ����������"�������"��+ ��#��#"���

(�����"#"��� �.���+"#�#���"�����#�� ���#"���"�#����." "#��#����� ���"����#��.���������#�� ���#����"������#�����#������#����������#����#�+��� �.������"#"��� ���#���������#�����+ ��#���� ��#�"����"�#� ���-����#����#"�"#��"���#����#�#�������#����� ���+���������"#"��� �"����#���#����#"��#��#����������

������ ������� ��#��"��"���#"��.���+"#���#�+���#�"�#�����+���#"��.��������������#���"�#"����++��#�#�#� ���#�� ���#��-���#"��#��#���� ��"#�������"#"���+���3��� �����"�������#������"�����#� �������������#�"@���.���"�� ��+ ��#��#"�����#���"��#���������#�� ���#"����#���#����"���#�����#�����#���#��� ����1��#����"���#"���#����#�����"���#���#�"����"���"����"�#�������#��#�����#���#�������"������

External Need to Track Costs

�3#��� ���#"#"���+#����D�"��"���#"��#�����"#�����"+"�������+�����#"����������#"#"��"�� ������� �#��������"��B�����������"��#��#�"�+ �������������#"�� �"���#"�C�����#���������D�"������� +E��� �#"���������"#�"����+��������7��������"@�#"��������#�#��#��"����� "�����.���#"�"��#"���"����"#�#"���������������-�����"#�#"�����������"���+-�����"#�#"���#�#��#��#�����"@�#"���������#�. "����.�"���������#���"���#�������+�������������������#�#"���#������#�#�����������7�� ���#"�"��#"���"������"#�#"���������"���#�����������������(������"@�#"����#���#��"���"+�"#�������+����#"�"��#"���"������#"������"#"��� ������*����"+������"��������#�"�#������ ����+"�"��������#���#�����#�. "�"�����#����+��������#"���+����#��"�E�"�����#"�"#"������� "�/�#"+"��#"���+��"�� ����#"������"#�"����������7��������"@�#"��"�� ����#�� +E"��������#�������#�����������. �����������#�� "�"��#��������+���#��"�#��� �#��#�������"@�#"���������"+������#"������������D�"����#��3"#������� #"��#����� �"�#��������#��#���"�+����������"�#�"������������ E�������"@�#"���#��#��" ����#"����#��.�����"�. ����#�������#���+�#����+�#��#���*�#���� ��������� �.� ��� ��

Industry Overview

1–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Conclusion

����"@�#"���#��#����"�#��#���"�����"���#������ #���+�#��"���#"�����"@�#"����������������"� "@�����#�������" �. ���7�#����"�� ����#�. "�"���#����"#�"��+������"@�#"��� ���� #����#�. "�"�������"�� ����#"��������������������#�����#������� #�������#"����#���������#�. "�"���"#�"��+����� ��#"����������������#�����"#�#�������"@�#"���"��##�"�"���#���� #"��#����� ��+���"�#�"�"�����"����"��������+�"#�#���#���*�#�

-+�#�������"@�#"��H���� �"�� ��������#"����#���#"�� ���#� ��� �����������#��� �������#��#���#"������ �"���#��� ��"�� ����#�����#��+������#����������"�������"����.�#�#��#���#��+ ��#�� ��+�#�����"���+��#��#��#����"��#���#�#� ���#���+" ���(�� �"���� ��"�� ����������#"�"#��#��#���"#"�� �������#"�� ���++��#���#�#��#��"��#�����#�� ��.�������� ����#��#�������������#����������." "#��#��.��*���#������������+"����3#����#����. ������#��"��#��"���#"+��������� ��#����#"�"#"��#��#������ ��. ��#��#�����������#��"���#"+�����������"��������#��"��#��� #�"��#����." "#��#��#���"�.�"���"��#���� �.� �������"#������#��.��������#�������*�#�� ����

Idea to Action: The Competitive Advantage

����+� ��"������#��"�� �"���"������+��#�"���������#"����#���.�"����#"��#��#��#�� ����������. ��������#����#������"���#���#�

����� ������

��� �� � ��� � ��

������ � ������� ��

� ����� �� � �����

6����#���#"���������"���������#"���+���#"��

#�������#������ ���"������� �#����#"������

������#"����""." "#���#������ ��� ��+�#�������"@�#"���

��#��������" ���"����"�� �� �������������� ���+

�����#�����#��������������#���

����� �����"���#����." "#��#���#��������#���#

"�+���#"���.������������#�" �

����� � �������������� �����"������#"����

�""." "#���+������#���#�����������#"�������

�����#���+������"�#���+���#"���#�������#�#��

��#��"�����"�� ������������#�#����*�

.�##�E"�+��������""���

Product Costing and Manufacturing Accounting

1–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ������

����� ��� �� �����

�������

6����#���#"���.��"#��5�#���"#��H���#�����.��.�*��

�����#����������"+"��� ����#�"�+ ����"�����#�

��#��������" ���"����"�� �� �������������� ���+

�����#�����#��������������#���

����� �����"���#����." "#��#���#��������#

"�+���#"���.������������#�" �"�+���#"���

����� � �������������� �����"���"������

��������"����#��""." "#��+��.�##�E"�+��������������#

���""������"������#".�#��#��"���������������"�

��#��"�"�����#�#����#����

������� �� ��� �����

�� ������� �� ���

������ �� �� ���

������� ���������! ��

��� �� ��������

������ �������� ���

����������" ���

�� �� �� ���

��������������#��#��������������#�����������#"��

������ ����������������#�#�������#�#����#���.�

�"���(�#���#"��(�����#"���-�#��#"���B((-C�����>0<

� �������

(����#��������#"���������+���#"�"#��������" �. �

��#���#"�� ���"#���#��D�""������������#"���������

#�������#������������#�

1��������#��"#"���3"#�+��"������#��������#"��

�����#��.�������#���

����� � �������������� �����"���"������

��������"����#��""." "#��+��.�##�E"�+��������������#

���""������"������#".�#��#��"���������������"�

��#��"�"�����#�#����#����

#��� � ����

������� ������� ��

������ ������� �����

� ���������

A���������"���������"�#�"�������#���#"������

������#"���#��#����"#�"����"�� ����#�.���#�����"��

�����#�������#�������#�#��� "+����� ���+�����"#���

����� � �������������� �����"���#����." "#��#�

�"���������/�#���#�����������#"��������#����"�#�"�

��������#���������� �#����#��"#���#�������#���"�� �

��#�.������"��." "#�����#".�#��#��������������"��

���#"�����������������#�

Industry Overview

1–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ������

$�� ������� ����

��������� ��� ��������

���� � ���� ������ "

��� �� �� ��� ���

��������� ����%���

���� ��� ���� �����

� ������

&�� ���� � ��

��������� ������ �� ���

���%���� ��

��������� �������"

9��#���(��������6"�"����#���"�����/���#"����"#��#��

�� �����+"���#���#���#�����#�������#������#"�� �

�"�"����#�� ��������#���:���������+"���#"�����

��#��"�����#�#���#"����+������� ��#��"��"���#�

������"������"�������������"�"���#�����"��

��#�����"#����#���#"���"���D��#���#�����#"���

����� � �������������� �����"���"������

��������"����#��""." "#��+��.�##�E"�+��������������#

���""������������������E����"��� ���#"���

��� �� ��� ������

������ ������ �����

���������� �����

������� �����������

&�� ���� � ��

��������� ������ ��

�������� �����"

����7���+��#�"���(�����#"����#������"���������+

#������ �.����#�#��#�����.����������#������#

��+���������"������+#���������#"��������

����� � �������������� �����"��������#�����

#"�� �������"���������+�#��������������#

��+����������"������#".�#��#�����������#�

��#���E� �#�����#�

Product Costing and Manufacturing Accounting

1–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Product Costing and Manufacturing AccountingOverview

7�"�#�"�"��������#���������� �#��������+�#����� ����+�"����#���"������+#�����/����������+���#�.�"����#������F���"���#���������+�������+"#�. ��#��*�����"���"������"�#����#�����+���#"��������#�"�"����#���"#��������D�"�* ����� �#��������+"#��

����6����#���#"����#���� �������#��#��������#"������#�"�+���#"����-#� ���� ������#���������������#�.�����"�"���"�+���#"���#������������H�.�"���� �����"#�������#�������#���#"��������������� ��#��#��+� ��"�������+��#�"���������#����#��"���#���"����#�#�������������H.�##��� "��5

� 7���+��#�"���.����#�B�"��#� �.���"��"��#� �.��������������C

� 6����#���"���B��"�����������+��#�"������"���"��C

� (�����#"���B������"��.�������#� "�����"#��C

(+#�������#�. "����#�"��#���6����#���#"����#����#���7���+��#�"��(�����#"����#���#��*�#�����#�����#������"������������#����+��#�"���#����#"���#��#�������� � �����

System Integration

6����#���#"�������7���+��#�"���(�����#"������#����+�#����#���#��#���"�� �����"��#�����#��"��)�D�"����#�6 ���"��������3���#"���B�)63C��#����

�)63�"���� ���E ��������+��#�"����#���#��#�+��� "@�����������������#"���� ���"��������#���"�� ����#�#"����+�#����� ����9��#����)63�#���#������"��#������"����#������� �.��������#���� "��������#�����"���#����������������� ��

Product Costing and Manufacturing Accounting

1–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"����"���������#����#���#��#���*������)63�����#����D�����"����"���#�������"�� ����#���

ResourceRequirements Planning

(System 33)

ERPxEnterprise Requirements Planning and Execution

Tactical Plan

Operational Plan

Execution

Rough Cut CapacityPlanning (System 33)

CapacityRequirements Planning

(System 33)

Finite Scheduler

ManufacturingAccounting (System 31)

Shop Floor Management(System 31)

Procurement (Systems 40 and 43)

Material RequirementsPlanning (System 34)

Master ProductionScheduling (System 34)

Distribution RequirementsPlanning (System 34)

Inventory Management(System 41)

Sales Order Management(Systems 40 and 42)

Forecasting (System 36)

Configuration Management(System 32)

Product Costing (System 30)

Strategic Business Plan

Product Data Management(Systems 30 and 48)

Product Costing and Manufacturing Accounting Overview

1–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#�"��+���#"����"#�"��#���6����#���#"�������7���+��#�"���(�����#"���#������ ����"#���#���������������#���������5

� 6����#���#��7��������#

� �����1 ���7��������#

� �D�"����#06 ��#�7�"�#������

� 6���

� >���� �(�����#"��

A������ ���������.�"������#���"����+�#�����#�������#��"�#�. ���������#����"�#���#��"#��6����#���#"�������7���+��#�"���(�����#"���

Features

����6����#���#"�������7���+��#�"���(�����#"����#������"���+ �3"." "#��#����������#����������+��#�"������"�����#��������+�#���.���+"#����+��#����+�#�����#�����5

'��� ����� ���� � ����

�� ���%��

��+"���������"�#�"������� "�"#������.���+���#

��������#�+��#��*"������"+"����#��������+�"��#�

#�3�����#�������� ��#"�"#��

'��� ����� ���� ������

�������

��+"�������� "�"#������.���+���#���#����#�����"�

��#�"�� �#"������ ���������#�� ���#"���

'��� ����� ���� �������

�� �����

( ���#����#�+��#�������#��#�������"+"��"#��������

+��#�������#����������"#����#��3#�������E���#�

�� �� �#�����"#"��� ���#�

(��� ������� 6"�#������� �#���#��+����#�#���������� ����#��"#�

������#�.�+���"�� ����#"��������������

��� �� ������� ������ �� �� �#��#���#�#� ���#�"� ���#�.���#"��"���#���." ��+

��#�"� �+��� �"#����������"���#���#�#� ���#��+�#��

��������#�

(��� ������� )��������� �#��"�� �#"����+���#�.�+������� "�����#��"

����#�����#���+�@���#������

#���%������ ����� 7�"�#�"����#�"�+���#"����#�#���.����0� ��#� ��� �#�

� ���+����#���"������#��"++���#� ���#"���+��"���#"��

����+��#����"#���

Product Costing and Manufacturing Accounting

1–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)������ )��"���+���*"����+���"����5

� ���"���"��� 6 ������ (�#�� �B��#�"� ����� �.�C� �#��

*����� ����� ���

�������

���#����#�" �����������/���� ���#"��+����*����

���#������� ����"�����

*����� ����� ��� ����

����� �� ���� ��������

���������

���#����#�" �����������/���� ���#"��+����*�"�

����������� �#"���

+������� �������

������� ,++�- ������

�����������#�#�����"+"���������#�

������� 6"�#����#� "#"�����#�" �����#�������"�����+����*

�������#������� ��

Product Costing and Standard Accounting Integration

6����#���#"���� �����"��"+"���#�� ��"��#�������+��#�"������"�����#��1�#��������#"����.�+�����������"�� ����#�����7���+��#�"���(�����#"���#����������#��#������#�+��#��������#�#��#������������������ �� �#�#������#��������#����"���#���+� ��"�������#�"��#�������+��#�"�����"�����#5�

� ��#����#"���B���#�����#���"#����� ����#�#��������?C

� =�"��������#"���B��#�� �����#��������#C

� 6����#�����/�.���#"���B��#�" ���"�+���#"��C�+����#�"� � �.�������������

-+��������#��������#�B�!C���#���#�����+#�������� �� �#��������#��������#��� ���"����"�� �#����������������#"+"����"#��#����� #�������#��#�. "��+�@���#��������#���������#��( �����+ ���#����#"�����#����+�@���#������+���� �� �#"������"����"��#�������#��#����#"���"���������� � ������������#���.�"��+�����"����#����� ��#"���

�#��������#"���"���#���� "��. ��+�������������"#��#�. ����#����� "## ���#���"�����+�����������+��#�"������#�����#����������"���"#���"�"�� ������#"���#�++��+#������#��������#�������#"���

Product Costing and Manufacturing Accounting Overview

1–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Actual Accounting Integration

��������������"���#�����#����#�����#����� ��#����#�� ���#��������#������5

� ��"��#�(��������#���#����B��C

� (�#�� ����7���+��#�"���<�#����#���#����BB�%C

A�������"�� ����#���#�� ���#"����"#��#���7���+��#�"���(�����#"����#���"#���#��"���#���6����#���#"����#���

7����������"���������#�������������������1 ���7��������#��#�����#�#�����#��������������#�� ��������������+��#�"�����#��-+���������#�� ���#"����#����#����� �� �#��#�����#��+�#��������#�.�" #��������*�������#������� ��.�������#�����#�� �������������#�����#�� �D���#"#���+"������#�������#�������#��#�����#�.�������#�����#�����#�"�+���#"���

(�#�� ���#"���"���+���#"����+�#���7���+��#�"���(�����#"����#���������#�#��6����#���#"����#����-+����������#�� ���#"�������������#������#���#��������#���#�+�������"#���#��#���������+��#���.�����������#���#��" �.��� �� �#��������#�����*����#���������� �#"����������(������������������#����������."��#"����+���#�� ���#���"#�������#��������#���"#����(���������"��������+�#�����#�� ���#"�����#�����" ����#�#���#����"#��3#���������������#���"#���� ��+��#������������#"���

������������� �#����*�����+��"#���#��#����#����������B��C�����#�� �����+��#�"��� �#��B�%C���#���#�����#����#��5

� �� �� �#����������#���"#�+��#���"#���.�����������+ �����#"�"#"�

� )��� �����������"����#���+��"#����"�����#���#�����%

� �� �� �#����������#��#�����"��#������������#

� 9���#��#�����#�<�����#�. ���"#��#���������"#���#

(��������#"���"��+#�����+� �+��������"���������#���������+#���.�#���#"��"+"���# ���(�#�� ���#"���"���+� �+��������"��#��#5

� ���"����������+��#���#�����

� ���#��D��#�#"��

� G������#�#��#���������+#�������"��"+"���# �

Product Costing and Manufacturing Accounting

1–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Achieving Effective Cost Management

7�#��+�#�����/������������#���#��"#�"����������+��#�"�������������#".�#��"�+���#"���#�����������#���#"�����#"�"#"�������#���+�����++��#�#������ ����������+���������+��#�"���.����#�

����+� ��"���#�. �� "#��3��� ���+�����#���#��"#�"����#��"�� ������������#�������#��+�#���6����#���#"�������7���+��#�"���(�����#"����#���#��#����++��#���.��#��#�����#���#�

.��� /����� ������"������"���"��������"�����". ��+�����"��

#��#5

� ����." ��+���#�"� �"����� �#�� ������*�E.���"�+���#"���"������#�� �������"���"��������������B���C������.���

#�*���"�#��������#

����� ����� ��+�������#".�#��"���#��#�"�+���#"��

����"���#���#���*�#������ ���#��� �#�#�#����"�

����+��#�"����1���++��#"�����#����������#��#���� �

+������#����"���#"�� �����������. ��+����#�

#���������

/�����

��������+��#�"������"���"��������"�����". ��+�

"���#"+�"��5

� ����#������� �������#���3"#"��������� 7���+��#�"����������� (����#��"�+���#"����.��#���*����#�

0������� ���������"�������#���#���#����"��5

� (����#����� "����#� (����#��#����#�#"�����#

#��������� 7���+��#�"�������#"������"����"#� �"�+���#"���#��#��

��#"����++�#��1���3��� ���#������#5

� -���#�#��"���#��"����#"�� �����������#�������� -���#"+�������"������"��"��#���." ��+���#�"� ����

��#"��

(��� +������ ������#�������#"���#�++���#5

� �����#��#�� �"#����������#� -���#"+������� ��������"�"#�#"����������� 6������#"�� ����"��������#�B#��������#����

����#���#C

Product Costing and Manufacturing Accounting Overview

1–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����� ��#���"������ ��.�����"�������������+"���������������������+��#�"�����#��"�� ��"��5

� �����B���������+#��C��������������#

� G������� "�"#�����

� �����#�����#��+�������"#���"��+ ��#��

� G�������������#�+�� �.���#��������*����#���������

A����"��#�� ��������#��#����#��"�� ��"���#�������������+"�����#5

� 4�#�� ���#�������" �. ��.�+�������"�"#"� ���#�� ���

� A������������"�����#���"#��+�������

� A�����������"������#� �����#� �.������������#�

� 4��������#������#�����#���"����#"�� ��������

� �#�������������#���#���+�D���# ��

� -#��������.����������#������ �#���+���#���." ��+���#�"� �"����#��� �#��#�����#��

� �#���"��#�����#"�����#�������.������������"����#��� �#���#�����#��

Considerations between Standard and Actual Costing

(������������ �����"���#������"#���#����������#�� ���#"���������"�����"#�����������D�"����#��A�����#���"�����������"���#"����������*"��#������""���#�����#����������#�� ���#"�������������#"��������"#�"��#�����""�����*"����#���+� ��"��� "#�"���#"+"�����"���#"���� ����#�#��#�������������6����#���#"�������7���+��#�"���(�����#"���"������� ��K�5

�������� ��� �����

�������

��������� ��K����"����+�#����� ������7��������#

�������+"���#����� "��#"��������#�+� ������#���#�

��#�� ���#������#����B������%C�

��������+��#�"�����"�����������B6 $��8C������� �

���������#������� �������������#�#����

#���������

����������

1����#�� ���#"�����#����B������%C������������

��������5

� 9"����� ��"�� �� ��� �." ��+���#�"� ��"+�������." ��+���#�"�

� 9"����"��#������+��#�"��� 9"������"����#����������*��#���������#"��

����������#�����#���+�� �"�+���#"������#�����*���

� ���� �#"�������*�����#���� ������ �#����� ���#"��

Product Costing and Manufacturing Accounting

1–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������� �������

����������

������"�����#�� ���#"�����#����B������%C�������� �5

� :�������#��#�#��+�"���"����#���+������������#���#����#�����#��+������� ��B��>�C��"��#��� #"����� "�. ��"�+���#"���"��#�����"�����������#"���

� 7���� ���#�#�����#�� ���#�+��#����"���� ���#"���#��D�� �#���#��������#�#��� ���+��#��"��#�#��*��

� 9���#����#��#�����"���+�����"�� �"����#���"��#�.������#"��������"���#�����"#���#�����#��#����

(���� ���������� A������ ����"�#�"��"����#�����#� ��� ��#�#���"#���

.���������� ���#"��� ��� �B-����#�����#�<��� � C�+�

.�#��� #�"+��"�����#�� ���#���#����B������%C�

Tables

����+� ��"���"��� "#��+�#���#�. ��#��#��������#�������#�6����#���#"������7���+��#�"���(�����#"���

+����� �������

,12324-

���#�"����#���#"���+���������"��������"������.� ����

B��#��������� �#"��C����"�#�. �����#�"�������������

������#�� �����#������. ������+"�� ����������#����#"��

�������#�. ��

+����� 5�����

,12366-

���#�"����#�" ���#����#"���"��#�������� � �����

+����� #�����

,12326-

���#�"��������#���+"�"#"����"�� ��"������.�����

���"�#"���

+������ ����

,12626-

���#�"��"�+���#"����.��#���#�������� "������ �����

���������#�

+�������

+������

�������� ,++�-

)�����

,17238-

���#�"��������#����.��#��#��������#�����#��/����

��#"�����������������#�#��#����������#�

����� (�����

,12266-

���#�"���#��E�����#���.�#���������"�+���#"���

"�� ��"���#���.�#������.���.�#���#�#�������.�#�����#����#��

Product Costing and Manufacturing Accounting Overview

1–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��� �� #������

#�����

,19224-

���#�"��"�+���#"����#�#���.�"�����"#� ��� ��.��#�." ��+

��#�"� ��������D���#"#"���+���������#�������#�����

#�"�"�+���#"���#���� �� �#����#�"� ���#�

�����:0��� #�����

,17624-

��+"���������"�#�"������������� ��#E ��� �"�+���#"���

������.����E ��� ���#����������

������ '� #�����

,1222;-

-���#"+"��"�+���#"����.��#�.�"�����"#���������������

�����������#�����������"�����#��#���.�"�����"#�

(��� (�������

,19224;-

���#�"��#��������#������3#����#�

(��� 5�����

,17628-

���#�"��#�������"@���"#�����#�����"����#����� ��#"��

��#����

/<����� ����

���� ,16926-

���#�"��#���"�+���#"���.�������#����D�"����#�." "��

� ��#"���������"��#���7���+��#�"������#��#��#���

=����

#������:�����

,122636-

���#�"���#������+��#��#�. �����+� ��5

� �0�1���#"���1��#�� �0�)���#"���)�#�� $0�)���� �����)�#�

���� 5�����

,17666-

���#�"��#����#"���#��#�"��"��#���������"��"����#����� ���

���� 5�����

,176246-

��#��"���#���>0<�� �����������"������+��#�"��

������#"���#����#"���

���� #�����

,17626-

�#���.�"��"�+���#"����.��#��������+"����"����#���"#���

������"#������.������"�#"������#�����������������"#

�+�������

#���������

(������

,19223-

�#�����"�. ��#��#�"��"��#���+���3��� ������#���#��"�� ���

�++"�"�����"��#�����#�� ������"������������� ���#�����

�������#������#�����+�� �.���#��

#��������� .���

,17624>-

�#���#���������#"�����#�D���#"#�����"���#����#������#�

��#��"���#���� ���#"����+�+"3����#�����#�+�����"#���

0���� 5��

,19666-

���#�"��#�����#� "#�#��#�"��##������#������*��������#�

����� ���-#����#�"�����������+���������#�������#��

���#��#�"�#�. ��"�#���#"�� ����������������#���6���

��*�����������

Product Costing and Manufacturing Accounting

1–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&�� ��� �� 0���� 5��

,19666&-

�#���#��������� �#�����#�������� �#������������#�����

��������#�������D���#"#��+����������#�

0������� (���

,19624-

���#�"��� ���#����"�#����"#������#"�� ����*�����

0������� $����

.����� ,17966-

���#�"��#����#"���� �#���#���������������

����� #�����

,19229-

�#�����#"���"�+���#"����"�� ��"�������#"����D������

��*����#������#"�����#���#"������������"���#"�������

�#������#�"�"�+���#"���#���� �� �#�� �.�������"�������

����������#�

����� 1��

+������ ,1723;-

��#��"���#���"�+���#"���#�����+����#��./��#�

'��� .���� (����

,12228-

���#�"�������+"�������������#��"����"�#"���

���� (���� #�����

,19222;-

���#�"����#�" �����#���.��#�� ���+"������*����#��

"�� ��"����++"�"�����

���� (���� �����

,19222?-

���#�"��"�� �#�������+�@����#��+���������*����#������

���#��+�������������� �.��

���� $���� #�����

,17?26-

���#�"��� ���*�����������"�+���#"����������#��+���#�"

#�. ���������������+ ���������*�������#�������#�

#�"�#�. ����������� �#"���#����#"�����������"�#�����*

����

&�� ��� �� ����

$���� #�����

,17?26&-

�#���#�����#���#����+��#�����*������(��"#"��� ���"#

"�� ����#�����������#��������#�����D���#"#��+��������"#

����#�����������#�����*��������� �#"���

���� $���� �����

,19664-

���#�"��#�����#"���#���#��#�����##������#������*������

�#������� ���-#����#�"�����������+�����������#"��

�D���������.��������*����#��������#������#��#�"

#�. ��"�#���#"�� ����������������#���6������*����

������

&�� ��� �� ����

$���� �����

,19664&-

�#���#�����������#���D���#"#�����������#�+����#"��

����#"���

Product Costing and Manufacturing Accounting Overview

1–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���� $���� &��

&�������

,196644-

���#�"�� �.����������"���#"���#����#"���.����*�����

Menu Overview

����� �����"��������#��������������"������������"������"�����"@��.���#�������+�D�������+����

Product Costing

(����6����#���#"���+���#"���+���#���6����#���#��7��������#�������

Product Data Management (G30)

� Product Costing (G3014)

Daily Processing (G3010)

Periodic Processing (G3020)� Product Costing Reports (G3023)

� Product Costing Setup (G3042)

Product Data Management Setup (G3041)

Fast Path Commands

����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���6����#���#"�������5

(����� #�� &���

���� > �$8 6����#���#"��

�6� > �$8 6����#���#"��

66� > �� 6����#���#"���)���#

����� > �8� 6����#���#"�����#��

�6� > �8� 6����#���#"�����#��

Product Costing and Manufacturing Accounting

1–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Manufacturing Accounting

(����7���+��#�"���(�����#"���+���#"���+���#��������1 ���7��������#

������

Shop Floor Management (G31)

� Manufacturing Accounting (G3116)

Daily Processing (G3110)

� Manufacturing Accounting Reports (G3123)

Periodic Processing (G3120)

Shop Floor Management Setup (G3141)

Fast Path Commands

����+� ��"���#�. �����"���#���+�#���#����������#��#������������#������������#���7���+��#�"���(�����#"�������5

(����� #�� &���

�7( > $$& 7���+��#�"���(�����#"��

7( > $$& 7���+��#�"���(�����#"��

67( > $� 7���+��#�"���(�����#"��

)���#

��1� > $8$ �����1 ���7��������#���#��

Setup

Product Costing and Manufacturing Accounting

1–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Product Costing and Manufacturing Accounting Setup

:�+������������������6����#���#"�������7���+��#�"���(�����#"���#�������������#����+"�����#�"��"�+���#"���#��#�#����#��������"������"���������##"����"��#�����������"���������#�����������"��#����������#�� �������#"���+�����"#���

��##"���������#���6����#���#"�������7���+��#�"����#�������"#��+�#��+� ��"���#�*5

� 9���#���"��������+"��������

� ��##"��������#"���"�+���#"��

� ��##"������"�� �#����#��+����*����#�

� ��##"����������� � ������ ������

� )��"��"�������+��#�"���((-

Product Costing and Manufacturing Accounting

2–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding User Defined Codes

7����+"� ��#�������#�#���6����#���#"�������7���+��#�"���(�����#"���#����D�"�������+"����������A���������#��"@��+"� ��"�������#���.��##"�����������+"���������#�����#�#���������+���������"@�#"����9���+"���������� �������#���#�. "��������"�#�"����#�. ��#��#���+"����� "������+����"���#�����+�"�+���#"��������������#���"@���.���#�����������#����

����6����#���#"�������7���+��#�"���(�����#"����#������#���+� ��"�������+"��������5

(��� (�������

,92:(+-

9����#���������#�#��"���#"+������#��*������� ����#

��#�����+���#�+�����"#������#���������#�#��#�.��"�

�"#��(��:��������������E������.����������������

�����#�.�������������������������������#��#����

�����#���������#���+����#"�������#"���

A���������+"�������� "�"#������.���+����"#"��� ���#

��������#�#��������#�+���3#����#�+�����"#���������

� ��#"�"#������������������ �����#������������

���������#��#�������+"����3#����#��"#�����IKJ�+�

����"���#"+"��#"����A��������"�������#����#

��������#�.����#���"��#��#������� "��. ��#�����

.�"�������������+"���������+���3#����#

��������#�����.��"���"#������ �##���������(��:������

( #������"#��"��#�������#��#����������#�����3#����#

��������#�#��#�.��"���"#��#���� �##���#����"�� �#�

��#�)� �����������#�� ���� �#��#������#

��������#�

����������#������#���������#������ �#��������#�

"���+��� ��+�#�����". ����#���������#�#��#�����.�

����"��#�����#�� ���+�����"#�������� �#��#���+"� �

�"#��#���+� ��"���"�+���#"��5

� �����E����������+��#�����#���������#�� ���"�#"���$�E����#�#�����������#������#�� ���"�#"�����E�(��"#"��� �#�3#�#��#�+�#���� �"+"�

���"�#"���$���#�����#���������#�� ����"� �G��� "���'�1����#"�������#"����#����$��

#���+"#������#��

Product Costing and Manufacturing Accounting

2–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��� ������� ,92:(�- 9����#�.��*�#�#�������"�" ����#���������#�+�

"�D�"���������#"����������

����������#������#�.��*�#������ �#��#���+"� ���"#�

#���+� ��"���"�+���#"��5

� �����E�-���#"+��#�����#���������#�#��.��������� ���"�#"���$�E����������#��#��������#�#���������

#�������"���+��#�����#�.��*�#��� ���������#���." "�D�""���������#��A����� �������#����#��#�"�#"# ������+��������D���������.���-+�#���������+"������#�������������+����.��*�#��"#����#���������+"����+��#��� �#���#���������#�#��#�"#������ �#��"�#��#�������#"���.��*�#�

� ���"�#"�����E�����"+��"����"����� ����B.��*�#C�������#���������#�"��������

��������������� ����������������������������������

� ����������� ��

(����� $������

������� ,92:($-

9������#"���.��*�#������#�����."�����������#���#

"�������#���"��#�����#"�������#�"��������������

����#"�����#�"�#��#�#� �#��#������������#�����#"��

"�D�""���������#��1���3��� ��������"��#�#��*� �.�

��#�.������#����#���������#�#��#������#��#���

���������������� �.��+�����"#����A������ �����."��

#������#���������#�"�#������#�#� ���#�+�� �.�����#��

��#�����#"���"�D�"�������#�+��#���"#���.���"��"��

#��������D���������.��#���������#���������#�

����������#��������#"���.��*�#����������� �#��#��

+"� ���"#��#���+� ��"���"�+���#"��5

� �����E�-���#"+��#�����#���������#�#��.���������� ���"�#"���$�E����������#��#��������#�#���������

#�������"���+��#�������#"���.��*�#��� ��������#�����#"���"�D�""���������#��A����� �������#���#��#�"�#"# �������+��������D���������.���-+�#��������+"�������#�������������+����.��*�#��"#���#����������+"����+��#��� �#���#���������##��#�"#������� �#��"�#��#�������#"���.��*�#�

� ���"�#"�����E�����"+��"����"����� ����B.��*�#C�������#���������#�"���������A������ ������.��*�#�$�������+���3#����#�B9�� ����#��������#�9��� �0�(C�.������#����#��������#��� �� �#����#�.��*�#�$�������.�������#����#"���������3#����#������#�� �#���#������#"�� �����#"������#�����#"����:��*�#�$�������������"�#��������������+���#���)��#"���-�D�"�����������"�����#"������#� ����#���#�������"�� ����"��#����� �� �#"����+�#�#� ���#�

Understanding User Defined Codes

2–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

/ ����� /����

#������� ,92:/#-

���#�"��#������������#��#����������#�����#"��

�3���#"������#����������"#������#�"�������+�#��

���"�� �����"��#�"�#�. ���A��������������#������"#�

��� ��+�������#������#��#�"������"�#��+�����

����������������"#�� ��� �"���+"����"�����"�#"�����

�������������������E�������A��������#������

�� �#���������-+������������#���������+�����3"#"��

�������������� ����#��������"#�����"���.�#���� �

����#�#�����+"�"#"���#������#��#�"���������#����.�

������������

+������ (��� (��������

,72:+)-

-+��������#�������"��#���(��������#���#����B��C�#�

.������#�����#���#"�� ��.��#����#����������#��#���

������+�#������������.��#��#��������#�����#���"�

#�"�9��� "#�

(��� #������ ,72:(#- ���#�"��#�����#���#��������#���� �� �#����#�+���

"#����������$�#�������%�����-��������E���������

�����#�.��� #����������$��#������$%����������+�

���.��������������������������!�������%����#����� �

��#���#��������#���.������+��#�"���

Example: Setting Up Cost Bucket Codes for Costed Bills of Material

A������������"�" ����#���������#�+��"�D�"���������#"����������1��3��� �������������+"���($�����(����#���������#���6����"����A������#�".���"��"���#����#��������D���������.��"��#������"�#"�����+"� �������D���������.��� ����#��"���"����"�������#������������"� ���������#���." �"�D�""���������#��A�������#�������#�����#���." �"�D�""��������#�#����"���#���#�#� ���#�+��#��������6������

�������#�.��*�#��������#�"������ ���+"������#���������#��1���3��� �������"��#���+"���#���.��*�#����������+"�����������+� ��5

������ 6 6�����

-�� ������#���������#�($�B��#�"� C��(��B���C�����

�$�B��#"�������#"��C

������ 4 <�.�

-�� ������#���������#�:$�B�"��#� �.�C��:��B�#��C�

����:8�B �.���++"�"����C

Product Costing and Manufacturing Accounting

2–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������ 9 7���"��

-�� ������#���������#�: �B����"�����C

������ 7 �������

-�� ������#���������#��$�B����"�����"�. �C�������

B����"���+"3��C

������ 8 �3#�

-�� ������#���������#�K$�B#�3�C�����K��B� ��#"�"#�C

See Also

� ����� � ����������� ����������"��#������������ ����� ���!� ���+�"�+���#"����.��#�����#���#���������+"��������� "#

� ���� �������������"������ ���������������#�� �� ���$��������������� �������������������+��"�+���#"����.��#��##"������������"�#�"�"���#������+��#��+���3#����#

2–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up Costing Information

A���������#��"@��#���6����#���#"�������7���+��#�"���(�����#"����#��#�����#��������"+"������+��#�"������"�����#������������#������#���� ���#��#�������+"���#����#��"���#�����#��+�#���"#�����������+��#����

��##"��������#"���"�+���#"������"#��+�#���+� ��"��5

� ��##"������������#"�����#�D���#"#"��+��#��������#

� ��##"������"#�����#� ���

� ��##"��������#����������#�+��"#��

� ��##"����������+��#�"������#��#

� ��##"������#�������#������+��#������

� ("��"����� ���#�������+"������#���������#

@�����-+���������"#�����+�#�����#�� ���#���#��������������#����� �#��#��#�*�+���##"������������#"�����#�D���#"#"��

Setting Up Accounting Cost Quantities for Standard Costs

�����#������������#"�����#�D���#"#"��#����#��"���#���� ���#"����+�+"3����#�+�����"#����(�����#"�����#�D���#"#"�������#�#����������D���#"#���+����*��������#������� ��+��#�"�"#������"�����#�� ����#����#����"�"��#���+"3�����#�.��#���������#"�����#�D���#"#��#��#��������"+��#����#��"������"#�+"3�����#�

@�����-+���������"#����+�#�����#�� ���#���#����B������%C�+�����"#������������#������#������ �#��#�"�#�*�

&� ��� �� ������� ���� <������ ��� ������� �����

1���#���-#���)��""��������B>8$$�C��������-#���:����06 ��#7���+��#�"�����#��

Product Costing and Manufacturing Accounting

2–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���:���������� �#��#���+� ��"���+"� ������� "�*�1"��5

� -#���4��.�

�� �����������������#����������(��"#"��� ���#���-�+���#"���+���#��)��������

� ���(��"#"��� ���#���-�+�����"���#���+� ��"���+"� �5

� (�����#"�����#�;#�

Setting Up Costing Information

2–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

(�����#"�����#�;#� (�������#�#��#�#����#������"��#�����#�)� ��

������#����#��"���#���� ���#"����+��#�����#�����

�#���#�#� �#����#�����#������"�"���#������.��#�"

D���#"#��#����#��"�������"#��#�����#��������+�� #�"�$�

Setting Up Item Cost Levels

������#� ��� �#��#������"���#�����"#���"��"��#��#��� ��� ��#���"���#����#����"�#�"����#��A�����#��"������#���#����#�����"�#�"���������� ���#+�����"#���B��#� ��� �$C������"++���#���#�+��#���"#���"�������.����0� ��#B��#� ��� ��C�������#�������� ����"�#�"�����"++���#���#�+������� ���#"������ �#��"#�"����.����0� ��#�B��#� ��� � C�

����+� ��"������ "��#���"�����#� ��� � 5

� ���+"�����"#�����#�.����#� ��� � �

� �-+����������#�� ���#"������������������������#��#����������# ��� � �

� -��#���#��������#"����#������#��#���#� ��� � ����"�+���#"��� ��� ��

(+#�������������#������#�"�+���#"���������#�����������"#��H���#� ��� ���#�"�+�����������������"#��H���#� ��� �����#���-#�����#�<��� ������"��������

See Also

� �%�� ���&��������'�(����+��"�+���#"����.��#�����#���������#�����# ��� ������"#����.�����"����

&� ��� �� � ��� ���� �����

1���#���-����#���7�#�0�����#"��������B>8$$$C��������-#���7�#��

Product Costing and Manufacturing Accounting

2–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���7�#��:��������� �#��#���+� ��"���+"� ��"��#��;����.���3��� ���������� "�*�1"��5

� ����-#���4��.�

�� ������#������������� "�*��� ��#�

� ���-#���7�#��)��""�������� �#������"���#���+� ��"���+"� �5

� -����#�����#�<���

Setting Up Costing Information

2–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8� -+����������#�� ���#"�������������#���� ���#���-����#�����#� ��� ����� �#��#���+� ��"���+"� �5

� <�#�6��������

1��� / ������

-����#�����#�<��� (������#��#�"��"��#�����#���#����#�����"�#�"�����

���� �"����#�����#�+��#���"#�������"++���#���#�+�

�����.����0� ��#�������"++���#���#�+������� ���#"��

���� �#��"#�"����.����0� ��#�������#�����"�#�"�

"����#�����#�"��#���-����#�����#�#�. ��B18$�2C�

=� "���������5

$ -#��� ���

� -#��0:����� ���

-#��0:����0<���#"��� ���

<�#�6�������� (������#��#�"��"��#�����#��� �#����"� ����.��"

�"������<�#������"� ����.�����������#���<�#

7�#��#�. ��B18$��C�

=� "���������5

� <�#��"�����#�"���#"��� ��A������������ �

�"������.���;���#"#������.�����#��#���

����B��+�� #C�

$ <�#��"�����#�"��D�"���������#����"��

���.���"���#����#�����#��"��AA77��

+���#��;���#"#������.�����#��#��������

� <�#��"�����#�"��D�"���������#����"��

���.��"�������"��������"���4�3#

4��.���;���#"#������.�����#��#��������

<�#��"�����#�"��D�"����A�����#������ �

�"������.���;���#"#������.�����#��#���

����

8 ��"� ����.���"�����#�"���#"��� ��3���#

��"����"����#����+"��#"����;���#"#����#���#

�3���������

2 ��"� ����.���"�����#�"��D�"�������

�#����"������.���"���#����#�����#��"�

AA77���+���#��;���#"#����#���#��3����

����

& ��"� ����.���"�����#�"��D�"�������

�#����"������.��"�������"������

�"���4�3#�4��.���;���#"#����#���#��3����

����

! ��"� ����.���"�����#�"��D�"����A�����#

����� ���"������.���;���#"#����#���#

�3���������

Product Costing and Manufacturing Accounting

2–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up Methods and Costs for Items

A�����#����"�����#�"�+���#"���+��������+�����"#�����#��#�#����#���#�#��*�"����#�����#��A������"+��#�����#���#����#��#�#����#������#���#��"������"#��H���#�+��.�#��� ������"����#���#����#"������������������

1���3��� ��������������"+��#��#�#����#������#�����"��#������������#��#����#����#��"���#���"����#�����#�+�����"#����������#��� �#E"����#��#����#����#��"���#���"#��H���"#���#�+�������������

A�����������#������������+��#�"���������#"���#����������+�#���+� ��"��5

������� ����� 9����#���#�����!�B�#�����C�

��"���#����"���+� �+��"#���#��#��������+��#����"�

�� �����"#�� �����"�#�����������#�. ����#������

�"�����#���#�����!�+��#�������#�"#����#����#�����

�� ����#�����!�+��� ���������#��+�#�������#����#"��

����#"����������+�#��

+����� ����� 9���"#�����#���#�������B��"��#���(�����C�����#

��#�����%�B(�#�� ��7���+��#�"���<�#C�

����������"����"#�����#���#����������%�#��#��

����#�"#���������#����#��������#����*�����"#

���#�"�#������#��#���<�����B�(<��>C�+"� ���

����+����#�����������#����#�����#� "#�+��#�������#

"#������������������ "����#���#����B8�0�7C��������#��

��#"�����#������� ��#���"��#��"#����� ��

��#�7�#�������B��"��#���(�����C�"���+� �+����#�#��#

��������+#����9��#�"���#����"+��������H#����#�#�

��� �����������"����#��������#�����*�������

���� �#���.�#��#���#"����+�����������#��"��#"���

��#�7�#�����%�B(�#�� ��7���+��#�"���<�#C�"���+� �+�

"#���#��#�������"������������+��#����#���������

�������#�#��#���������+#�������"��"+"���# ���9��#�"

��#����"+��������#�#����� �������"����#��������#"��

#��#��������#�����*��������� �#"���������

1���������#���#����#��#������"���#�����"#����������#�� �����"+������#�� �#�#����#����� �� �#��"#��1���3��� ���#�����#�����#�� ��������+��#�"��� �#��#���#����+�����"#����������� ����#�����"�"#"� ���#��� �#�#����#�������#�"#��"#��#��� �#� �#�����+��#������#��-+����������#�� ���#"����#����#���#"����#��� �#���������������"�#���#�+���#��� �#����"�#�

Setting Up Costing Information

2–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

A��������#���������+"���������B8�0�7C�#����+"�������������#���#����1���3��� ��������"��#����#�#���#�. "������#���#����#����"�#�"�����"#����+ �#����H���#� ������$�#�������%�������E���������������#�.��� #���������$��#������$%����������+�������������������������#�.���"�����

@���� A�����������������#���#����+�����"#���"+�"#�"���� �������� "��. ���-+����#��#������������� ������"����#����������"�����#���#�����#���#����"� ��������"���������������#���������#��� �#��#�����#��#�����.�#�����#��"#�#������#��+�@���

See Also

� ����� � ����������� ����������"��#������������ ����� ���!� ���+�"�+���#"����.��#��##"���������"#"��� ���#���#���

� ���� ���)�������������+��"�+���#"����.��#�����#"��������#��#��������#

&� ��� �� ������� �� ����� ��� ����

1���#���6����#���#"��������B> �$8C����������#�0�������-#�����#�

$� �����*��"#��-#�����#������ �#��#���+� ��"���+"� ������� "�*�1"��5

� :����0�6 ��#

� -#���4��.�

�� ������������������ "�*�(���

Product Costing and Manufacturing Accounting

2–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����#�)��""������#��#��������"�#����#���#����"��#���+� ��"��+"� �5

� �� �0-����#��

� 6����"��

8� ���� �#��#���+� ��"���+"� ��+��������+�#������ "��. ����#���#���5

� ��#"���7�#���

� 9�"#���#

-+�������#������#���#����+���� �0-����#�����6����"������������#�#��������#������#�+��#��#���#����������"����������������-+���������#���#������#������#�+��#�����#���#�����#����#����"�������#�+�@���

1��� / ������

�� �0-����#�� (������+"���������B8�0�7C�#��#�"��"��#��#�����#

��#����#��#�#����#������#���� �� �#��#�����#��+�����

� ��+��#���"#������#���#�����$E$%����������+������

���������

��*���� � �� ����� ���������������������������� ����������������������������

-+�������"�#�"����#��#�#���"#��� ��� ��#����#����#"���

#�����+�� #��� ���+��#�"�+"� ��+���#�����#���"�#"������-+

������"�#�"����#��#�#���"#�������.����0� ��#� ��� ��#��

�#����#"����#�����+�� #��� ���+���:����06 ��#

���#��#�

Setting Up Costing Information

2–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

6����"�� (������+"���������B8�0�7C�#��#�"��"��#��#�����#

��#����#��#�#����#������#����#��"���#�����#��+�#��

"#���+����������������#���#�����$E$%���������

+����������������

��*���� � �� ����� ���������������������������� ����������������������������

-+�������"�#�"����#��#�#���"#��� ��� ��#����#����#"���

#�����+�� #��� ���+��#�"�+"� ��+���#�����#���"�#"������-+

������"�#�"����#��#�#���"#�������.����0� ��#� ��� ��#��

�#����#"����#�����+�� #��� ���+���:����06 ��#

���#��#�

��#"���7�#��� (������+"���������B8�0�7C�#��#�"���#"+"������#���#����

9����#���#����#��"��"��#��#�����#����+��#����#���#�

������#���#�����$�#������$%����������+������

���������

9�"#���# ���������#������"#����"����.���"�"�"���#���#�#� ���#�.�

#�����"#�D���#"#��

��*���� � �� ����� ���������������������������� ����������������������������

������#�+��������"#��+�#�"�"#����.�������#��

�������"�����#���#����

A��������������#����� �������#�+��������#���#�����#

����#"����-+������������#��������#�+��#�����#���#���

#��#��������#��#��*���#��+������� ���#����#��

��� "��#������������#�#��������E�����D���#"#���+�#��

"#����-#�� �����#��/���� ���#"��#��������#�+��#��

�"++������.�#�����#���� ������#������������#�

��#�"������������#��#����� �������#�+��������#

��#������3��� ��"�� ����#���+� ��"��5

� <�#E"����#����E������#���"�#���#"�� ������#�#�"���"#���#�.�������#��� �#���#��+�#���"#����##���#"����+�����������������"�#����+#����"����#�����/�#���#�

� ��"��#������������#����E������#����� �� �#���������#��#�"������#�.�����"���#����#"��D���#"#"������"���#����#"�����#�������"�"�"��#���#�#� ���#�.��#���#�#� �D���#"#��

� 6��������#����'������#�������#��"�" � �#��#��� �#E"����#�����.�#��"#���#� ��������#�

Product Costing and Manufacturing Accounting

2–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Cost Revisions

Process

1. Enter a ’1’ to prevent the ____________ standard cost from being changed.

Interop

1. Enter the transaction type for ____________ the interoperability transaction. If left blank, outbound interoperability processing will not be performed.

Setting Up Manufacturing Constants

A�����#��#�. "��"�+���#"���#��#�"���"D���#������.����0� ��#��9�����+��#�"������#��#�#���#���#"���#��#���#��"��5�

� G���#���� �� �#������������#

� ���#���#�����"�����*����#���++"�"������������ �� �#"����"��#� �.������������

� ���#����������������#�����������#����#�

� G���#���� �� �#�� �.����������"����#��+����#�� ���#"��

&� ��� �� ���������� ������� ��� 0������ (����

1���#���6����#���#"�����#��������B> �8�C��������7���+��#�"������#��#�

Setting Up Costing Information

2–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��7���+��#�"������#��#����������.����0� ��#������ "�*�� ��#�

�� ���7���+��#�"������#��#�)��""����� "�*�#�����#"�����#"���#�.�

� � "�*�#��������"�#����#"�����#"��5

� 7��"+����#�.����*����#���++"�"����

� -�� ������*����#���++��"���������

� -�� ����=���<�.����������"����#

� �� �� �#��=��������#���<�.�

� �� �� �#��=�������"��#�<�.�

� -�� ����1"3���<�.����������"����#

� �� �� �#��1"3��������#���<�.�

� �� �� �#��1"3�������"��#�<�.�

� -�� ����=���7���"�����������"����#

� -�� ����1"3���7���"�����������"����#

8� 1����#�� ���#"�������� �#��#���+� ��"���+"� �5

� 7���"���)�#�������

� <�.��)�#�������

2� � "�*������+�#���+� ��"�����#"��������#���������������"��5

� 6����#���

� )�#�

Product Costing and Manufacturing Accounting

2–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� � "�*��F���������������������� �#��������"�#����#"�����#"���

See Also

� ���� �������������� ������������"��#���)�����������������

!� ���+��+�#���"�+���#"�������##"������� �#�������+��#�"�����#��#�

1��� / ������

7��"+����#�.����*

���#���++"�"����

(����#"���#��#���#��"������#���#�����#�� ������#�

��#���������#�:8�B+�� �.���++"�"����C�.�������#��

�"��#� �.���� ���B��#���������#�:$C�����#�����*

���#���++"�"����������#�+���#�����*����#��7�#�

#�. ��B1 ���&C�

1���� �5

=� "���� �����5

A A������#����#���������#�:8�

4 4��������#����#����#���������#�:8�

1������� �5

������#����#���������#�:8��� "�*�#���7��"+����#�.�

��*����#���++"�"�������#"��������#�����#"�����#"��

����"���

-�� ������*����#���++�

"���������

(����#"���#��#���#��"������#���#�����#�� ��

"�� ������*����#���++"�"������������ �� �#"����������

�� ����"+��������"+"���#��#��������#�#�����"+����#�.�

��*����#���++"�"�����

1���� �5

=� "���� �����5

A A���-�� ������*����#���++"�"�����

4 4��������#�"�� ������*����#���++"�"�����

1������� �5

���"�� ������*����#���++"�"������� "�*�#���-�� ������*

���#���++��"������������#"��������#�����#"�����#"��

����"���

Setting Up Costing Information

2–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

-�� ����=���<�.�

��������"����#

(����#"���#��#���#��"������#���#�����#�� ������#�

��#���������#�� �B+����"�. �� �.���������C�"��#��

-#�����#���������#�(��E���#�. ��B1 ���&C�

1���� �5

=� "���� �����5

A A������#����#���������#�� �

4 4��������#����#����#���������#�� �

1������� �5

������#����#���������#�� ��� "�*�#���-�� ����=�"�. �

<�.����������"����#���#"��������#�����#"�����#"��

����"���

�� �� �#��=��������#��

<�.�

(����#"���#��#���#��"������#���#�����#�� ��

"�� �����#��� �.���3�����B��#���������#�:�C�"��#��

#�#� �����#���� �� �#����"�. ���#�����������B��#

��������#�� C�

1���� �5

=� "���� �����5

A A���-�� �����#��� �.���3�����

4 4��������#�"�� �����#��� �.���3�����

1������� �5

���"�� �����#��� �.���3������� "�*�#����� �� �#��=��

�����#���<�.����#"��������#�����#"�����#"��

����"���

�� �� �#��=�������"��#

<�.�

(����#"���#��#���#��"������#���#�����#�� ��

"�� �����"��#� �.���3�����B��#���������#�:$C�"��#��

#�#� �����#���� �� �#����"�. �� �.����������B��#

��������#�� C�

1���� �5

=� "���� �����5

A A���-�� �����"��#� �.���3�����

4 4��������#�"�� �����"��#� �.���3�����

1������� �5

���"�� �����"��#� �.���3������� "�*�#����� �� �#��=��

����"��#�<�.����#"��������#�����#"�����#"��

����"���

Product Costing and Manufacturing Accounting

2–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

-�� ����1"3���<�.�

��������"����#

(����#"���#��#���#��"������#���#�����#�� ������#�

��#���������#��8�B+��+"3��� �.���������C�"��#���-#��

��#���������#�(��E���#�. ��B1 ���&C�

1���� �5

=� "���� �����5

A A������#����#���������#��8�

4 4��������#����#����#���������#��8�

1������� �5

������#����#���������#��8��� "�*�#���-�� ����1"3��

<�.����������"����#���#"��������#�����#"�����#"��

����"���

�� �� �#��1"3��������#��

<�.�

(����#"���#��#���#��"������#���#�����#�� ��

"�� �����#��� �.���3�����B��#���������#�:�C�"��#��

#�#� �����#���� �� �#��+"3����#�����������B��#

��������#��8C�

1���� �5

=� "���� �����5

A A���-�� �����#��� �.���3�����

4 4��������#�"�� �����#��� �.���3�����

1������� �5

���"�� �����#��� �.���3������� "�*�#����� �� �#��1"3��

�����#���<�.����#"��������#�����#"�����#"��

����"���

�� �� �#��1"3�������"��#

<�.�

(����#"���#��#���#��"������#���#�����#�� ��

"�� �����"��#� �.���3�����B��#���������#�:$C�"��#��

#�#� �����#���� �� �#��+"3��� �.����������B��#

��������#��8C�

1���� �5

=� "���� �����5

A A���-�� �����"��#� �.���3�����

4 4��������#�"�� �����"��#� �.���3�����

1������� �5

���"�� �����"��#� �.���3������� "�*�#����� �� �#��1"3��

����"��#�<�.����#"��������#�����#"�����#"��

����"���

Setting Up Costing Information

2–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

-�� ����=���7���"��

��������"����#

(����#"���#��#���#��"������#���#�����#�� ������#�

��#���������#��$�B+����"�. ������"����������C�"��#��

��#���������#�#�. ��B1 ���&C�

1���� �5

=� "���� �����5

A A������#����#���������#��$�

4 4��������#����#����#���������#��$�

1������� �5

������#����#���������#��$��� "�*�#���-�� ����=��

7���"�����������"����#���#"��������#�����#"��

��#"�������"���

-�� ����1"3���7���"��

��������"����#

(����#"���#��#���#��"������#���#�����#�� ������#�

��#���������#����B+��+"3�������"����������C�"��#��

-#�����#���������#�(��E���#�. ��B1 ���&C�

1���� �5

=� "���� �����5

A A������#����#���������#����

4 4��������#����#����#���������#����

1������� �5

������#����#���������#������ "�*�#���-�� ����1"3��

7���"�����������"����#���#"��������#�����#"��

��#"�������"���

7���"���)�#������� (������#��#����"+"��#��������+������"����#������

#����#����� �� �#����#"�����#�+������#"��#���=� "�

�� �����5

$ ��*����#��)�#��#�. ��B1 ����C�

� �D�"����#�)�#��#�. ��B1$ �$C

<�.��)�#������� (������#��#����"+"��#��������+�� �.���#�������#��

�#����� �� �#��#�����#"�����#�+������#"��#���=� "�

�� �����5

$ ��*����#��)�#��#�. ��B1 ����C

� ��� �����<�.��)�#��#�. ��B1��$%$C

-+����������#���#������ ����#����#������#�����*

���#��)�#��#�. ��

Product Costing and Manufacturing Accounting

2–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

6����#���)�#� (����#"���#��#���#��"������#����� ���+���������

+"� ��B��#���������#��$�#�������8C�"��#�����*

���#��)�#��#�. ��B1 ����C�����3������������#��

�#��

1���� �5

=� "���� �����5

) �3������������� ������#��B������

�� ��C�

6 �3������������� ����������#�

1������� �5

������"+�����#���#����#����3����#����������

+"� ���������#����#���� "�*��"#���6����#���)�#�

�����#���������������"���

Setting up Standard Rate and Factor Codes

�#�������#������+��#������������#�����������#����#���"��"��#���##��#������#�.���##".�#����"��# ��#������#�"�������#"��������������#"���.�#���#�.��������#���+��"��#�����#��+����"#���������#�����+���#�"�� ����#" "#"���"���������������������� �����#���#����#��� ������#�����#����������������� �����#"�����#�

@�����)�#������+��#���������������+"�����.�#�������#�������#����+��#���������A��������#��������#����+���#��������+"��������� "#�#��#�����#����"#��#��������..��"�#"������������1���3��� ��� �0�)�+���#���9�� "#��" �������"#"�� ���*����#��������#�#����#������)�#������������+���#��������

�����"�� �#����#�)� ������������#����#������+��#��#��#�������+"���#��� �� �#�������+�#�����#�#��#������������#�0���������#���������#�

A��������#���#����.�#���+�#���+� ��"�������5

� �#�������#�������B �0�)C

� �#������+��#�������B �0�1C

See Also

� #�� �� ���$���������������� �������������������#������ �#��#����#���+��#��������

Setting Up Costing Information

2–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� ��� �� ������� ���� �����

1���#���6����#���#"�����#��������B> �8�C���������#������)�#��

$� ��������#"���)�#������� "�*��� ��#�

Product Costing and Manufacturing Accounting

2–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�� �����#��>���"��7����0)�#������� �#��#���+� ��"���+"� �5

� ����

�����#�0���������#���������#��#����#������#�"��� ���"����/���#"����"#��#���1��#�����������1��#��)�#��#���� �� �#���3#���#�

� ���"�#"��

(����"�#"����+�#��������

� )�#�

�����#���"#�����#��+������"�� �� ��������#���� �� �#��#����3#���#�+��#�"������

&� ��� �� ������� ������ �����

1���#���6����#���#"�����#��������B> �8�C���������#������1��#��

$� ��������#"���1��#������� "�*��� ��#�

Setting Up Costing Information

2–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�� �����#��>���"��7����0)�#������� �#��#���+� ��"���+"� �5

� ����

�����#�0���������#���������#��#����#������#�"��� ���"����/���#"����"#��#���)�#�����������)�#��#���� �� �#���3#����#�

� ���"�#"��

(����"�#"����+�#��������

� )�#�

�����#���"#�����#��+������"�� �� ��������#���� �� �#��#����3#���#�+��#�"������

Product Costing and Manufacturing Accounting

2–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Assigning Values to User Defined Cost Components

���������������#������#���������#�����#�������#������+��#�������������#��"���������#����� ���#��������������� ������������#��#�����#������#�+������"#���#��#������#�����A��������"����� ���+�������+"�����3#����#"�������+�#���+� ��"������5�

� ("�������#E�������� �������� �

� ("���������+"������ ��

� ("������� �� �#����� ���.����������#�����#���������#H�#�#� ��� ��

� ("������� �� �#����� ���.����������#�����#���������#H���#E������� ��

� ("������� �� �#����� ���.���� #"� �"������#��������+��#�

A�������� �����������#�"�+���#"������� �#���3#����#���������#�

Before You Begin

� ��#����#�����#���������#�"��9��� "#� �0�(��������������� ���������� ����������

� ��#����#���#�������#������+��#���������������� �������������"����� �����������

Setting Up Costing Information

2–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� ���� � �� ����� ����� �������

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ����������������� "�*��� ��#�

� �����#����#���������#������ �#��#���+� ��"���+"� ������� "�*��F5

� ��#�����

� �"�� �#���4�#�(����

@���5��������������������� ����#������#�"��#����"�� �#�����#� �+"� �������������#����"�� �#����#�)� ���������

&� ���� � �������� �����

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

9�������+"�����#�����������+��#�������#��"���#"+����#���������#�

Product Costing and Manufacturing Accounting

2–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ����������������� "�*��� ��#�

� �����#����#���������#������ �#��#���+� ��"���+"� �5

� ��#�����

8� ���� �#�������+�#���+� ��"���+"� ������� "�*��F5

� �"��1�������

�����#����#"����#����� ���#��#�������+"����+��#���+��#������B �0�1C�"��#���>���"��)�#��#�. ��B1��$%$C�������#�����#��#�"�� ���"��#����"�� �#���1��#��+"� ��������#�����#������+�� #�� ����+�$�"��#����"�� �#���)�#��+"� �������� #"� "��#����� ���"�#����"�� �#���1��#������#����"�� �#���)�#��+"� ��

����"���#����� "��+��#�����������#����"�� ��"#��������1��#��+���#���1��������

� �"�� �#���)�#������

�����#����#"����#����� ���#��#�������+"����+��#����#������B �0�)C�"��#���>���"��)�#��#�. ��B1��$%$C�������#�����#��#�"�� ���"��#����"�� �#���)�#��+"� ��������#�����#������+�� #��� ���+�$�"��#����"�� �#���1��#��+"� �������� #"� "��#����� ���"��#���"�� �#���)�#������#����"�� �#���1��#��+"� ��

����"���#����� "���#�����������#����"�� ��"#���������)�#�+���#���1��������

@���5�-+��������� �#��.�#��+"� ���#����#����� #"� "��#����#������ ���+��#���+��#������#����#��

&� ���� � ���������� ����� ����� � ������ ���� �������A� �����

�����

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

�����#��������� �� �#��#�����#��������� ���.�������#���#�#� �+������3"#"����#���������#�������#����� �� �#��#�"��� ��������������#��#�����#������#����#���������#��������#����#����� ������"�#��#�����#��+�#���"#���������������"�� �#����#�)� ���

Setting Up Costing Information

2–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������������������ "�*��� ��#�

� �����#����#���������#������ �#��#���+� ��"���+"� �5

� ��#�����

8� �����,�+� �����.��#�����#���������#������"��#���+� ��"���+"� �5

� �"��1�������

:�������+�#�������#��#�#����#���� ����#�����#��#�����#���������##��#������+��������#������.�+���#�����#���������#�#��#���������+"�"����1���3��� ���#����+"�����#���������#�K������������+�������#���������#�K$�.����#�"���,K$�"��#�"�+"� ���.�#����������#���+"����#���������#�K$�.���+����"�����#���������#�K��

2� ���� �#�������+�#���+� ��"���+"� ������� "�*��F5

� �"�� �#���)�#������

� �"�� �#���)�#�

�����#����#"����#���#�#� ��� ���+��#�����#���������#������� #"� "�"#�.��#����#���� ���#��#�����"��"��#���

&� ���� � ���������� ����� ����� � ������ ���� �������A�

��%����� �����

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

�����#��������� �� �#��#�����#E�������� ���.�������#�����#E�������� ���+�����3"#"�����#���������#�������#����� �� �#��#�"��� ��������������#��#����#�������#����#���������#��������#����#����� ������"�#��#�����#��+�#��"#����������������"�� �#����#�)� ���

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������������������ "�*��� ��#�

� �����#����#���������#������ �#��#���+� ��"���+"� �5

8� ����������������� "�*��� ��#�

Product Costing and Manufacturing Accounting

2–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2� �����#����#���������#������ �#��#���+� ��"���+"� �5

� ��#�����

&� �����L�+� �����.��#�����#���������#������"��#���+� ��"���+"� �5

� �"��1�������

:�������+�#��������#���� ������#��#�����#���������#�#��#�����+��������#������.�+���#�����#���������#�#��#����������+"�"����1��3��� ���#����+"�����#���������#�K������������+��������#���������#K$�.����#�"���LK$�"��#�"�+"� ���.�#����������#���+"�����#���������#�K$.���+����"�����#���������#�K��

!� ���� �#�������+�#���+� ��"���+"� ������� "�*��F5

� �"�� �#���)�#������

� �"�� �#���)�#�

�����#����#"����#�����#��������� ���+��#�����#���������#������ #"� "��"#�.��#����#���� ���#��#�����"��"��#���

&������ � ���������� ����� �� �������� � ���� �� � ������

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

�����#��������� �� �#��#�����#��������� ���.���� #"� �"������#������+��#���-+������#��.�#�������#��#����#����� #"� "��#���#������.��#���� �� �#��#����#���������#�+��#�����#���������#�+��#��#�"#���

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������������������ "�*��� ��#�

� �����#����#���������#������ �#��#���+� ��"���+"� �5

� ��#���������#

8� ���� �#��������.�#���+�#���+� ��"���+"� �5

� �"�� �#���1��#�

� �"�� �#���)�#�

( #���#"�� ��������������� �#��#���+"� ���"�� �#���1��#���������"�� �#���)�#���������.�#��������#����#"����#����� ���+��#������������� #"� "��#����

2–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up Simulated Rates for Work Centers

A��������++��#"�� ����������������#������*����#��.��#��*"����#��+�� �.���������"�����#��A�����������#��"�� �#����#��+������"������� �.�����.����*����#��������#���#����������#������#������ ���"���#������+��#�"����� �� �#"����������#��������"����#�����#"���� �.���#���"��������#�������"��#� �.���++"�"��������#�

-+��������#��������#"����������#��#����#���"�� �#����#��+����*���#��

-+����������#�� ���#"����������H#����#�#����� �.��������"����#���������������*����#���#���A������ ������������#�"����""�������������#����#������+��#�"������#��#��A�������� ���#����#�����*����#���#�������"+��������������� �.��������"����#��������#������#�����*����#���#����#����+�� #��#��"+�#����#����#������""��������#���+����� "�"��#�����#����#�

Before You Begin

� ��#����������*����#�������#�0���������*����#����������� ��

+ �%��������������"��#���)������������������!� ���+������ �#�"�+���#"����.��#��##"��������*����#��

&� ��� �� �������� ����� ��� ���� ������

1���#���6����#���#"��������B> �$8C����������#�0���������*����#�)�#��

Product Costing and Manufacturing Accounting

2–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����*����#��)�#������� �#��#���+� ��"���+"� ������� "�*1"��5

� ��*����#�

�� ������������������ "�*��� ��#�

� �����*����#��)�#��)��""�������� �#��#���+� ��"���+"� �5

� �"��#�<�.�

� ��#���<�.�

Setting Up Simulated Rates for Work Centers

2–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� <�.��=�"�. ���0G

� <�.��1"3����0G

� 7���"���)��

� 7���"���=�"�. ���0G

� 7���"���1"3����0G

See Also

� ����� ������� ������#������ ���&����� ���"��#���)�����������������!� ��

1��� / ������

��*����#� (��� �������"��+"� ��#��#�"���#"+"��������#����#"#�

�"#�"����.�"���+����"����������#�#��#��*���#��1�

�3��� �����.�"�����"#��"��#�.������������ ���#"���

/�.����/��#����*����#���.��������� ��#�

A��������"�����.�"�����"#�#������������"���"����+"3��

��#����� ����������������+���������+�����"." "#�

���#"����1���3��� ���#����#������"������#��+

�����������#�����. ������������#����"��. ��.�

.�"�����"#�#��#��*��D�"����#�.������". �

����#���#�

����"#��+��#�"�+"� �����������#�����+��� ���#"��

.�"�����"#�+����"�����������������#��"#��

4�#�5������#������#���/�.����.��+��/���� ���#"�

"+����������#���#������ ���"��#���((-�#�. ��

�"��#�<�.� (��#���"����#�����������������#��#�#����#�����

�"#��#���)���<�.�������+�#������"�#�����#"���#�

�� �� �#��#���#��������� �.����#�

��#���<�.� (��#��#��#�#����#�������"#��#�����#���<�.��G����+

#������"�#�����#"���#���� �� �#��#���#�������#��� �.�

��#�

<�.��=�"�. ���0G (��#���������#������#��"�������7���+��#�"��

���#��#������#���� �� �#��#���#��������"�. �� �.�

����������#��-+�#�"�+"� ��"����#���"#�"�#�����#��������

-+�#�"�+"� ��"��������#��"#�"�#��������#��+��"��#� �.��

��#�������#������ �����.���1���3��� �����#��+"��

�����#���2����

<�.��1"3����0G (��#���������#������#��"�������7���+��#�"��

���#��#������#���� �� �#��#���#������+"3��� �.�

����������#��-+�#�"�+"� ��"����#���"#�"�#�����#��������

-+�#�"�+"� ��"��������#��"#�"�#��������#��+��"��#� �.��

��#�������#������ �����.���1���3��� �����#��+"��

�����#���2����

Product Costing and Manufacturing Accounting

2–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

7���"���)�� (��#��#��#�#����#�������"#��#���)���7���"��������+

#������"�#�����#"���#���� �� �#��#���#����������"��

�.����#�

7���"���=�"�. ���0G (��#���������#������#��"�������7���+��#�"��

���#��#������#���� �� �#��#���+�#���#����������"��

����������#��-+�#�"�+"� ��"����#���"#�"�#�����#��������

-+�#�"�+"� ��"��������#��"#�"�#��������#��+�����"������

��#�������#������ �����.���1���3��� �����#��+"��

�����#���2����

7���"���1"3����0G (��#���������#������#��"�������7���+��#�"��

���#��#������#���� �� �#��#���#������+"3�������"��

����������#��-+�#�"�+"� ��"����#���"#�"�#�����#��������

-+�#�"�+"� ��"��������#��"#�"�#��������#��+�����"������

��#�������#������ �����.���1���3��� �����#��+"��

�����#���2����

2–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Setting Up General Ledger Class Codes

>���� � �����B>0<C�� ��������������.��#�����#���#"��������#"��"�#��#"���B((-C�#����#��"���#����"���������#�#����#�����#�#����#"���

A����#����#���>0<�� ����������-#���:�����)��""����G�������#����#��#�������"��#��#��� ���#��-#���<���#"���+���������#���((-����#���>0<�� ������+���#���-#���<���#"���#�. ��B18$��$C��

:������#����#��������#��/���� ���#"��.�������>0<�� �����������((-�������� ���#����#���� ����������+� ���>���� ���#���((-�����"#��� ������#����������#����"���� �.��#"����"#���#���������#"�������#���#�

See Also

� "�( �+ ����������� ���#���� ��#������ ���&������� ����,##&�-�+����"#"��� �"�+���#"���#��#�"�"���#��#�#���##"������+������+��#�"��������#"���

&� ��� �� =:5 ����� �����

1���#���-����#���7�#�0�����#"��������B>8$$$C��������-#��:����06 ��#�

Product Costing and Manufacturing Accounting

2–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��-#���:���������� �#��#���+� ��"���+"� ������� "�*�1"��5

� -#���4��.�

�� ��������.����0� ��#������ "�*��� ��#�

� ���-#��0:�����6 ��#�-�+������� �#��#���+� ��"���+"� �5�

� ��#�����'�>0<

Setting Up General Ledger Class Codes

2–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

>0<�� � (������+"���������B8$0%C�#��#�"���#"+"��#���>0<��++�#

#��#��#�����������"#�������+��#���������#�#����"��

"#���#�#���#����#"����-+����������#����#�#�����"+���

� ������������������#��LLLL�B+����#�"*C�"��#�"�+"� ��

A������������#���#"��������#"���"�#��#"���B((-C�#�

����+"���� ����+���#���#"���++�#�������#�+��#��

-����#����6�������#�������� ������7��������#

�#����A����"��#��"���>0<�� ���������+� ��5

-4�� �"��#���"�����

-4&� ���+�����

-4�� �#��*��� �

�����#������������#��������#"�����#"��.����������

"�� ��#����#"����1���3��� �����"�� ��� ���+���#��*

"#�������#"����#��������#"����+�������#"�����#"�

"�" ��#��#���+� ��"��5

�� �'�#��*�B��."#C�33333�33(0)��#��*��� ��B���"#C�33333�336�#"�����#����5�-4���#��*�-����#���B��."#C�33333�33�#��*���>��B���"#C�33333�33

�����#������#���� �����������#����������#�#����#�

+"���#���((-�

Product Costing and Manufacturing Accounting

2–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Manufacturing AAIs

�����#����#"���+����"���#����#������#��/���� ���#"�������#���#"�������#"���"�#��#"���B((-C�#��#�"�#��#�#���������#����#�#�����"+"��>0<������#��9����+"����((-�������#�����+��#�"���������#"�����������#��+������#������+"����"� ����#"����A������ �����#��((-�+���������"D�����."��#"����+����������#����#"�����������#�#�����>0<�� ���������#��������#�

������#��>0<���#"��+��#����#"����#���((-������#���+� ��"���"�+���#"��#��+"���#���������#����.��#����5

� �����������.�

� �������#�#���

� >0<�� ������

� ��#���������#

� :�������.�"�����"#

������������((-��#����#���������+"#�+������3��#���#���.�#����������������#���>0<�� ��������-+�"#�������#�+"��������"#�#����������+��#����+�� #�������������#���"#��H�>0<�� ��������-+�"#�������#�+"�������#����"##����������+��#�������������������LLLL�B+����#�"*C�+��#���>0<�� ������

�����((-��������#������"�#�#�������"+"��>0<�������#����"#"����+���.�"����"#������./��#���������."�"����������������������+"�������+��#�"���((-�#�#��� ���� ��� ����+� ��5

9662 ���

#�������:������������

����"+"����"���.� ��������#�>0<�������#�������

�����"�"��������#�"� �����#�+���"����#���#�

��*�"�������B�������#�#����-7C����"�((-�"�� �

����#��"������� �#����.���. "��+���"����#��

.��*�"�#����*�"�������

Product Costing and Manufacturing Accounting

2–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

9642 ���� 0������ 1����."#�#����#"����"������#�����#�"� ��� ����+

��*�"�������.��"�"��������#�"� �������#�#�

��*��������#������� ��B�������#�#����-7C����"

((-�� �������"������"���"��#� �.����#��� �.��

����"���#"����������������.����� �"���#����#�

"������#�"� �

1�����"#�#����#"������"������� �#"���B�������#

#����-�C�#�"�((-������#���#��+���+���#�"� ���#

+������*����������#������� ��+�����*�"�

�����"����#���#���.���. "�0+"�"��������

"����#������"�((-�� �������#���#��+���+��"��#

�.����#��� �.���������������+�����*�"������

�������*��������#������� ��������� �#��

9692

������������:1����

=����

����"+"����"���.� ��������#�>0<�������#�������

��������"�"����.���. "����+"�"���������+��

��*�"�������"�#��"����#���B�������#�#����-�C��

����B�������#�#����-�C�

9462 (��� �� ����� ���� 1����#�� ���#"������#��������"#"��� ���#��+�����

� ��#��#�������#�"�� �������������� �#"������

��#����

9442 5���� )����� 6�#���."#������#���� ��������������"++���#�+��

#�����#�� ��������"�#����"#������+ �����#"�"#"����

�������#�#����-=����"�"���� "��. ��#��� ���#

��������#��3���#�($�����(��

=�"����������#�������"#"���������#"���������"��

������#���#�������+����. ������+����. ��

9472 #������ )����� 6�#������#���� ��������#�����"++���#�+���#��

��#�� �+����#���������#�($�����(���������"����

�� #�+����"#������E"���������E"���

=�"����������#�������."#������"#�������"�����

���#���#�������+����. ������+����. ��

94;2 0���� )����� 6�#������#���� ��������#�����"++���#�+���#��

����#���#����"�#����"#������+ �����#"�"#"����

�������#�#����-=����"���"������� #�+����"#��5

� (��������#��#�����#� "#���#�����#"��� (��"�*�+��#�

=�"����������#�������"#"���������#"���������"��

������#���#�������+����. ������+����. ��

Reviewing Manufacturing AAIs

2–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

94>2 /����� )����� 6�#������#���#������B+�@��C���#�����"++���#

+���#�������#���#����"�#����"#������+ ��

��#"�"#"������������#�#����-=����"���"������� #

+������������#��#���#������." ��+���#�"� ���#��

#��������#"���

=�"����������#�������"#"���������#"���������"��

������#���#�������+����. ������+����. ��

94?2 $���� )����� 6�#������#������� �#�����#�"��"++���#�+���#��

#��������#����"�#����"#������+ �����#"�"#"����

�������#�#����-=����"���"������� #�"+�����#�� ��

"���+�����"��#����"�� ���+�#������ �����"������#��

�����#���D���#"#������ �#���� ��#���D���#"#�

�������������#��D�� �#�����*����#������� �

D���#"#���-#���� ��.������#��������"�����. ���

=�"����������#�������"#"���������#"���������"��

������#���#�������+����. ������+����. ��

9726 +������� ����"+"��#�����+"#����� ��������#�#��#��++�#���*�"�

����� �.��#����#"���#����*��������#�

����� ��B�������#�#����-GC�

&� ����� ++��

1���#��������1 ���7��������#���#��������B> $8$C��������(�#���#"�(�����#"���-�#��#"���

-+����������#���(�#���#"��(�����#"���-�#��#"���������+����������+��#�"���������#����#�����#���#"�� ����#�� ����B#���.��"��"����+�#������+��#�"���((-C�"��#����*"�����((-�+"� ��

Product Costing and Manufacturing Accounting

2–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��((-����������������������������#�" �+���#���)��������

�� ���(�����#�)��""������"���#���+� ��"���+"� �5�

� �������

� �������#�����

� ��#�����'�>0<

� ��������

Reviewing Manufacturing AAIs

2–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#�����

� :�����6 ��#

� �./��#�(�����#

� ��."�"��

� ����"�������##������#��������(##������#�+���#���1��������

8� ���7��"���./��#����"��������#�3#�+��#���((-��

1��� / ������

�� (������#��#�"���#"+"�������"+"������"@�#"����+�������#"#��

�����������������������������#�� ������3"#�"��#��

�����������#��#�#�. ��B1��$�C�������#�"���#"+���

���#"�����#"#��#��#���������� �#��.� ��������#��(#�#�"

��� ���������������"�#���������#����#"���

4�#�5�A������������������������+����+�� #��� ���

��������#��������#���#"��������#"���"�#��#"����A��

�����#������������������+��#����#"�����#"��

Product Costing and Manufacturing Accounting

2–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

����� (������+"���������B��0��C�#��#�"���#"+"��#����"�"�����

�������+�#���#����#"���

�������������������� ���+"3��+���������#�#����

��������������"���"�������"�#������#"�����#�

�����������������#�#������+"3��+���������5

6 (�����#�����. ���������#

) (�����#����"��. ���������#

� �"�������6����������#

- -����#����������#

� ���"����������#�#���

�����#������#���++�##"�����#"���������"�#��+�

#�����������#�#���������������#�.�#����

���� (������+"���������B��0��C�#��#�"���#"+"��#���#�����+

�������#����"������� ��"��"��#��#����"�"���+�#��

#����#"�������������������������������#�#���

�����+����������"���"�������"�#������#"������#�

��"������#����#���#"���++�#���#"����"���#�����#

�������B�������#"�������#�� +E.� ���"�����������

�"�"�� ����#��#����C

����+� ��"����������#�#���������+"����.������

������������� ����#�.���������5

6 (�����#�6���. ���������#

) (�����#�)���"��. ���������#

� 6��� ��������#

- -����#����������#

� 6����������6���"����������#

� >���� �(�����#"��0��"�#�-�#��#�:" "��

�������#

� �� ������6���"����������#

�� ��.���#��#

�6 6���������

)� ���#��#�:" "��

��#����� (������#��#���"���#�������� ����#��+���#�+�����"#���

(���3��� ���+�#������"���#��#���"���+� ��5

($ 6������������#�"�

:$ �"��#� �.����#"���� ��

:� ��#��� �.����#"���� ��

�$ =�"�. ��.�������#"���� ��

�� 1"3���.�������#"���� ��

�3 ��#"�������#"�����#"���� ��

K3 �3#�����E����������� ��#"�"#��������#�

������#"��� ����E��������#�#"������ ������#���"#�

#���#����K3��3#�����E������"���#�#��#���� ������

#���������� "�"#������.���+���#���������#�#�

�� �� �#��� #���#"�����#�� ���������#���#���

���"�#��#������#���������#��"#�������+�"3���

��+"������������#�.��*�#�

Reviewing Manufacturing AAIs

2–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

:�����6 ��# (��� �������"��+"� ��#��#�"���#"+"��������#����#"#�

�"#�"����.�"���+����"����������#�#��#��*���#��1�

�3��� �����.�"�����"#��"��#�.������������ ���#"���

/�.����/��#����*����#���.��������� ��#�

A��������"�����.�"�����"#�#������������"���"����+"3��

��#����� ����������������+���������+�����"." "#�

���#"����1���3��� ���#����#������"������#��+

�����������#�����. ������������#����"��. ��.�

.�"�����"#�#��#��*��D�"����#�.������". �

����#���#�

����"#��+��#�"�+"� �����������#�����+��� ���#"��

.�"�����"#�+����"�����������������#��"#��

4�#�5������#������#���/�.����.��+��/���� ���#"�

"+����������#���#������ ���"��#���((-�#�. ��

��*���� � �� ����� ���������������������������� ����������������������������

-+����� �����#�"�+"� ��. ��*��#����#������#���.�"��

��"#�#��#�������#�������#�����*������"��#���������#�

��#����#��+"� ��

�./�(��# ������#"����+�������� � �����������#�#��#��+��#��#��

�"�""����+�#�����#������B+���3��� ��� �.�����#�"� �

�����D�"����#C�"�#���.��#���"���1���3��� ����"�"�"��

�.��"�#����� ��#"�������"���#"��������.�����

4�#�5�-+���������"�����+ �3". �����#��+�������#�����#��

�./��#�������#�"��#�#��&��"�"#���������������������

#��#��������� �&��"�"#��1���3��� �����#�"������82&�"

��#�#�����������#�"���82&��.������"+�������#��82&�

#����#�����#��#����. ��*������#��+" ���&E�"�"#��./��#�

��. (��.�"�""����+�����./��#�������#����."�"���������#

"�� ����������#�" ���������+�#���������#"�����#"�"#�

+������./��#�������#�

��*���� � �� ����� ���������������������������� ����������������������������

-+����� �����#�"�+"� ��. ��*��#����#������#����� ������

��#�������#�����*�����"��#�����#������+"� ��

Processing Options for Manufacturing AAIs

Defaults

AAI Table Number ____________ Enter a ’1’ if the cost type field ____________ should be available to Distribution AAI tables listed below: 4122, 4124, 4134, 4136, 4220, 4240 and 4310.

Product Costing and Manufacturing Accounting

2–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Costing

������"�������#"#"���"���������"���.�"������"�����#�����#����������#������ ����#��#�����������������"����#�.��������+�� �����#��+�#��".�"�������.�����#��� ��*��#�+������#���+"�������#"���#������� ���#"�����3���"#�������#����*�#������������#�����#��+�����#"����( ��+#������������ ��#�����������#��.������+ �3". ��#���������"����#��������������#����"�#�"����"��������*�#�����

��*"����"#����#"������"#��+�#���+� ��"���#�*5

� )��"��"���." ��+���#�"� �������#"��

� ���#"���"�� �#�����#

� ��*"����"#��"�� �#�����#���������#

� 9���#"���+�@�����#

� )��"��"�����#"���"�+���#"��

� ��*"����"#�����"#"��� ���#"���+��#��

� (�� �"����3#����#�+��7���+��#�"���(�#�� ���#"��

� ��*"����"#��#��������#"���"���)63����"�����#

�����������#�"������������#��+�������#"���.�"����������#�����#����������#���������#����1�������#"���"���#"���������#�.��*����������#���#�"�#����������#".�#"���+��#��#��#�"�+ ������#���� #"��#����#��+�#������+��#���������#��A������ ��#��*���#��� ��#�����#��+�#���"��"�"��� �"#���.�#�� ����������"#"���+��#�������#"�"#��#��#�������#�#��#������������#��"������#����� ����+�#��������#�

4��������#"�"#"�����������"��#�������#�#��#��������#��A������ ����������������#�� �"��� ����#��"���#"+���������������#��+���#��A�����#� ������#��������#����"��������#��"��#�.�������� ����#����#����

Product Costing and Manufacturing Accounting

3–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��������������+"���"#������#"���������������#���#����#"����#"�"#"���������� �����#����#�" �����+"�"#"����+�#�����#"����������A����� �������#��#���#�#����"D�������#���������+��#�"�����#����#��#���������+#�����������������#�#���������#��� ���#"����D�"���#����"�#�"��������"#�������#���#"���"�+���#"���#�������#�#�����#"������+��#�"��������7��������#����#"���"�+���#"������. ������#��"���#"+����#�+� ��#������#�� ������#�#��#���#�.�������#��#������������#��#����.�.����������� �"�#��"������#����������H�.�##��� "�������"��������+"#���"��

What is Standard Costing?

�"#��#��������#"���������#"��#����#�+�����������"#������. ���������+��#������#������ ��� E.�E ��� �.�"�.�+��������#"���.��"����������#�#"��#�����.�������.�#����#���+�������������� �"��+�+�#�������"#"���

������� (���

@�� +���� (��� &���� (���

-�� ���5

� <�.�� �������� ��#"�������#"��� �3#����#� 7�#�"� �B+������������#

�� �C

-�� ���5

� ��"�"#��H���#E��������#� ��#� ���#��+� ���E ��� ���������#

������#E��������#������#�#�����#�#������+��#������"#����#������"+"�� ��� �"��#���." ��+���#�"� ��1������+��#������#��#�����#�"�� ���� �.����#"�������#"����������#��3#���.�#���#���#�"� �B ���E ��� �"#��C��1�����������#��#�����#E��������#�"�� ����#�����#��+���#�"� ������#�#� ���#�+����"#��������#�#�������+�#���"#��H���#E��������#�����#���#�#� ���#��+� ���������#�

:����+"�"����������"#�"���#�����������#���#��������������������������H�����#�����+��#�"�����+����������"�#�����#������B#���#C��#��6����#���#"������"���"�+���#"����.��#�#�������#���"���#���#�#"��#��������#�"� ����*�"���������������"�� �"����#����A����������#�""�+���#"���#����#��"����"�"����������"#���������"�����������#�

3–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Simulated versus Frozen Costs

�"�� �#�����#������#���I���#�"+J���� �"�+�����"������#���#�����A����"��#���#�#���� �� �#��"�� �#�����#�.�������+������"���+��#��"��#���.�"�����"�����#�������� �.���#����#�����#��+������#�"� ��A�������"�� �#���#������������"��B� ��C��������#"������������.�+�������+"�� "@��#���������

A���+"�� "@��#����������.����+��"�����+�@�������#��+��#����"������#��#�����(�+�@�������#�����"������"�� �#����� ���������*��#�������+�@�����#����������#��#�����#�<�����#�. ��B18$�2C��"#��#���#�#� ���#��������#����"��"���++��#���#" ���������#��#�����"#�����#���+�@�������#��

What is Actual Costing?

(�#�� ���#"������#��������������#�� �����+��#�"�����#����"�#����"#�����+ ���#����#"�����������*������(�#�� ���#"����� �� �#����#�.���#���������#�.�������#�����#� "#����#"���������3#����#�

-+��������"�� ����#"�����#�� ���#"�������������#���������#����������#���"����+�����#��������#"���+ ���#������#���������������#���(�#�� ���#"����"#����������������"���#���+� ��"���+��#��5

#������ ����� �����#����� �� �#����#�"� ���#�.�������#�����#"��

��#����������#� ��� �#��#���������������������#���

#���"#���

5���� ����� <�.���#������.���� �� �#���"�������+�#���+� ��"��

���5

� A����������#����#���#����+��#�����*����#��� �����#��������� �� �#�� �.���#���"���#��

��� �����)�#��#�. ��B $0�)C�� -+�������������������6��� ��#����#������

�� �� �#�� �.���#���"���#������ �������#�)�#��� A������������ ����#��#�����#������������#��#��

#"�������D���#"#������ �#���

#���� ����� 7���"����#������.���� �� �#���"�������+�#���+� ��"��

���5

� A����������#�����*����#���#��+��#�����#���#���#��#��������"+��

� �����#��������� �� �#����*����#���#���"���D�"����#�." "����#��

� A������������ ����#��#�����#������������#��#��#"�������D���#"#������ �#���

Product Costing and Manufacturing Accounting

3–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$������� ����� �����#����� �� �#������������#��"����#���

�����#����+���#�����*����#��)�#��#�. ��B1 ����C�

$���� ����� �����#����� �� �#����#�+����#"�������#"���+��

#�����#���#�������"+"���+��#���"#���#��#�"��������.�

�����#"�����������BL�6�"#��C�������#����� �� �#�

�3#����#�+���#�����#���������#�#�. ��B1 ���&C�

What Are Cost Components?

��#���������#����9���B �0�(C�#��#������#�#���"��"�"��� ���#�#��#���*�������"#����+���3��� �����#�+����#�"� �� �.�����������������3#���7�#�"� � �.�����������������#������#���#"�� ���� �� �#���.��#����#�����3#����#�������� ��#"�"#����������� �����#� ����

9����#���������#�#����"�#�"������ �#��"#�����#"���"�+���#"����A���������#����#���#����"�� �#�����#�����"��#���� ��� ���+��+�#�����#������������#���"� ���#���"�� �#�����+�@�����#E����������#�#� ���������#���#�+�����"#���

-�����"#"�����������5

� ( ���+���3#����#�� �#���#��#�������+��#�"����+��������#���������#�+��� ��#"�"#���"����������#������������������

� )��"������"+"���� �� �#"�������#����#��"�����#������#�+������"#���

� 7�"�#�"����#�.��.�����+���� #"+��" "#������"����7� #"+��" "#�����"���� ���+���"++���#���#"����� ���.���������"��� ��.�"�����"�#"���

� ��#������#"����#��#��#������#���#�� ����#�

� ��+"������"#"��� ���#�+��#��#��"�� ����"�������#���#"����� �� �#"���

See Also

� ��������� ����������� ����������+��"�+���#"����.��#��##"������9��#�. �� �0�(

3–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Bills of Material and Routings

����." ��+���#�"� �������#"���+�����"#������#�"��"���#��#�"�+���#"���#��#�++��#���#"������������#��#�#�"�"�+���#"���"��#��������# �5�

� )��"�����#"���"��." ��+���#�"�

� )��"�����#"���"�+���#"��

Reviewing Costing in Bills of Material

)��"�������." ��+���#�"� �#������#����#���." H�"���#�#��������#�"� ���#��� ��"#����"#����." �#�����+�7������#����

See Also

� ����� ���� ����������� ��"��#���)������������������!� ���+����� �#��"�#��#"����������#����#��." ��+���#�"�

&� ����� ����� ���� �� �������

1���#�����" ��6�7��"��#�������B> �$$C����������#�0�������:" �

Product Costing and Manufacturing Accounting

3–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��:" ��+�7�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

� (��+���#�

�� ������������������ "�*��� ��#�

Reviewing Bills of Material and Routings

3–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����#��:" ��+�7�#�"� �-�+���#"������"���#���+� ��"���+"� �5�

� -#���4��.�

� ;���#"#�

� 97

� 1"3�����=�"�. ��;���#"#�

� 1��#���#�M

� 6����#�����

� ����#"��������6����#

1��� / ������

;���#"#� �������.���+���"#�#��#�#����#������ "��#��#��

#����#"���

��*���� � �� ����� ���������������������������� ����������������������������

(����.��#��#�"��"��#�������������������#�������

#������+��#���#�������#�"#����(�D���#"#���+�@���"��� "��

������+�� #��� ���"�$�

97 (������+"���������B��097C�#��#�"���#"+"��#�����"#��+

��������#�+����������#���D���#"#���1���3��� ���"#

���������#���.�� ��.�3����."����#��� "#�������������

���

1�= (������#��#�"��"��#��"+�#���D���#"#��������. ��+����

"#������#���." ��+���#�"� ���"�������"���#��#���D���#"#�

�+�#�������#�"#�������������"�+"3������� ���+�#��

����#�D���#"#�����"��� ���� ����#��"���"+�#��

��������#�D���#"#��"��������#��+�#�������#�D���#"#��

=� "���� �����5

1 1"3���;���#"#�

= =�"�. ��;���#"#��B��+�� #C

M ;���#"#"������3��������������#�������

��#�#�#� �$��M

1��+"3��ED���#"#����������#��#�����*��������

7�#�"� �)�D�"����#�6 ���"����#��������#��3#����#��

��������#H�D���#"#��������. ���� ���.��#������

D���#"#��

1��#���#�M (������#����#��#�#����"�� �#����#�)� �����������

#���� �� �#��#�����#��+���+��#�������#"���"#������

�����#�����+�#���#�#� ���#��+�#�������#�

��#��#��������#����������� �����.���+���3��� ��

��#��2M���2���

Product Costing and Manufacturing Accounting

3–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

6����#����� ���������#�����+�����. ����������#���#�"� ����#��

��"���#�������+��#����+�����#"�� ������#�"#������"��

�)6076�07)6������#"����#����#���"��������

�D�"����#�+��#�����������#�"#���#���������#��+�

#��� ��

4�#�5���"�*�"�#����3���#��� ���+�����#�"#���B���

���������������#C�����#��#�������+��#�"��������

��"�*�����������������������#��+"����#���#�#� � �

"��#�������+��#����+�����#"�� ��"#����(����#���"�*

��������+��#�������� ��#������������������#�

� ���"����� �� �#"���

��#�������#��������� �����.�5��2M���2��

��*���� � �� ����� ���������������������������� ����������������������������

���������1 ������#� �����7�#�"� �)�D�"����#

6 ���"����#���"�+ �#����������#��D�"����#�.��#�"

�����#�������"����������#����"���"D���#��#��

� �#"���"���+���������#�����������������#�

����#"��������6����# (��� ���#��#�#����#������#��"���������������#��

�����#��+���#�"� �#��������#�+�� ���"#�"��#��

����#"���������#�������#��#�"��� ��������#�0������

:" ��+�7�#�"� �������������#���6 ������A"� ��9���#�

������������#����� �� �#��#�"��� ���.�

��������"���#����"� �������#����+���#��� �#

����#"���#��#���+"#�����#"����9��������"�����#"���"�

��#�0�������)��#"���#�����. ��#����#���#���� �� �#�

#�����������#����������#�

��*���� � �� ����� ���������������������������� ����������������������������

6����#���#"���"�+ �#����������#��D�"����#�.��#�"

�����#����������� �� �#"���"#�����#�

Reviewing Routing Information

)��"���������#"���#������#����#��"�"���#�#������ �.����������������#�

&� ����� ����� �������

1���#�����" ��6�7��"��#�������B> �$$C����������#�0�������)��#"���

Reviewing Bills of Material and Routings

3–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��)��#"�������#"����+"���#�����#"���#��#��������#�#���"���

�� ������)��""���+���#���1��������

� �����#��)��#"���-�+���#"������"���#���+� ��"���+"� �5�

� ��*����#�

� )���<�.�

� )���7���"��

Product Costing and Manufacturing Accounting

3–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ��#���<�.�

� �"���:�"

� �����"@�

� ��#�����

� ��������

� A"� ��M

� ����A"� ��M

See Also

� ���� ���+ �%�"��� ����"��#���)������������������!� ���+�"�+���#"����.��#���#�"�����#"���

1��� / ������

��*����#� (����.��#��#�"���#"+"����.������� ��#����*����#����

.�"�����"#�

��*���� � �� ����� ���������������������������� ����������������������������

1��6����#���#"����#�"�"�#�����*����#��+�����"��

��#�����#"�����

1���D�"����#�����#�"�"�#�����+#��������

����". ��+������ �#"���#�����"�#���������#"�"#��

7���+��#�"���(�����#"���������#�����#�/����

��#"��.����*����#��

)���<�.� ����#�����������+� �.��#��#������3���#�#��"����"�

#������� ������#"����+�#�"�"#���

������� �.������"��#���)��#"���7�#��#�. ��B1 �� C

���#���#�#� �����#��#�"#�#�*��#������"+"�������"@��#�

���� �#��#�������#"����������������� #"� "���.��#��

����"@����"�������+ ���� �������������#���#"���

��*���� � �� ����� ���������������������������� ����������������������������

1���D�"����#06 ��#5

��"�"�#����#"��#������.���+������������#������ �#�

����"�#���������#"�"#��

Reviewing Bills of Material and Routings

3–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

)���7���"�� ����#����������"�������#��#������3���#�#��"����"�

#������� ������#"����+�#�"�"#���

��*���� � �� ����� ���������������������������� ����������������������������

1���D�"����#06 ��#�7�"�#���������5

��#�"�������"�������������� �����D�������-+����

�����#��"����#�������+��#�"����#���������#���#�

����"��������-+���������"�������+��#�"����#���

#�������"���+����"���#�������"���������� ����#�.�

�#����������*����#��

-+�������#������"�������"��#�"�+"� ���#����#��

"��"��#�����������+��#��������"��������.�������#��

#"�������"#���#��+�#�����*������A������ ��� ���#�

#�*��#�������"�����#��+���"���+��#�����#"��#"��

�������#������ �#��#�����*������-+�������#�

����"������������������#"��� ������ �#��#���6����#

�+���� ���+"� ��#��"��"��#����������#"���#��#����

��� ������"�������#"����1��� ���"����������#��

�#�����#��"���#���#�#� ����#"����+�#�����"�#������

��*�����.��������� ���#��#�������#��+������"��

�������������#���� ���

��#���<�.� ����#�������#�������#��#������3���#�#��"����"��#��

���� ����� �#"����+�#�"�"#������"��� ���"���#��++��#��

.������"@��

�"���:�" (������+"���������B �0�:C�#��#�"��"��#����������"��

�� �.����������3�����+���������#���"���.�"

�����"���#"+��#���#"���.�"����#��#��.������+�

����"����� �.��������#����+���������#"���#����1�

�3��� ����2��������$������"������$2��������$�����

�"�����A���������"�#�"��#���#"���.�"������"���"��

:�"������

�����#������#����� ���"��#������"�#"��E��+"� ����

#���9����+"���������+���+����#"������������ "��

�� �� �#"�����������"�#"���"����#�#�������������#�

.�#�"���#�����"���� �� �#"���

Product Costing and Manufacturing Accounting

3–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

�����"@� �������.���+����� ��������*�"��#������"+"�����*

���#������#"�������#"���

�����#����� #"� "��#���)���<�.���� ���"��#���)��#"��

7�#��#�. ��B1 �� C�.������"@����"�����#"���#�

�����#��#�#� � �.�������#�

-+�#���6"���<���������"�<���:��#����#������#���#�#�

�.������+��.��*����� "����-+�#���6"���<���������"

����7��#����#������#���#�#� �����"�������+�

.��*����� "����"#���#����"+"��#"���.������"@��

��*���� � �� ����� ���������������������������� ����������������������������

1�������1 ���7��������#5

���������"@��+"� �����#�����*�����)��#"���+��

���#�"��#����� �����#�������#�����*����#��)��""��

+���B6 ��&C��A����������"���#����� ���.�������"���#�"

+"� �����#�����*�����)��#"���+����G�������#�����*

���#��)��""���+����" ���#��+ ��#�#�"��������

�������� (������+"���������B �0��C�#��#�"��"��#��#���#�����+

����#"�����3��� ��"�� ����#���+� ��"��5

( ( #���#����#"��

�� ���� �#"��

-� -� ��#"��

� ��3#�B��#��#�3#��#����"�#"��C

��*���� � �� ����� ���������������������������� ����������������������������

1��6����#���#"��5

�� ������#"����"#����I. ��*J�#��������#"����������

��#���

A"� ��M ����� ��������#��#��"� �������#�+����#��������6 �����

A"� ��9���#�����������#�"��� ���#������#��#��

���� �#"��������#�"��#�����#"�������#�������#"������

�����#�"��#���." ��+���#�"� ��7�#�"� �)�D�"����#

6 ���"������#���#������������#�����#����3"#"��

��������#����������#�#��� �����������#��������

����A"� ��M �������� �#"���� ��������#��#��"� �������#�+����#���

�����#������#�"��� ���#����/�#�#�������#"���#��

���������#�+��#�����������#��#�#��#�����#"���#���

��"����. ��#���7)6��#���#�����#�������#"���#��

���������#�� �����"#��#����3"#"�����������#����

�����#�#��� �����������#��������

3–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Creating Simulated Costs

A����������#���6����#���#"����#���#���� �� �#����#�.�����������#��#"�� "#��#"����A��������"���#����++��#��+������������#��#��������#�#��"������#��"#���#�� #�"���#���+�@���#��������#��-�����"#"������������"�� �#����#�����������"��B� ��C��������#"������������.�+�������+"�� "@��#�����������"���#���+�@�������#��������1���3��� ��������������"�� �#��� ���#�5

� �"�� �#�����"������"����#�"� ���#

� 1����#�#���"����#��+��������#�� �.���#�

� ���� ���#�#��"��+���"�"�������#��#�� ���� �.������#"�#"��

���#"���"�� �#�����#����"#��+�#���+� ��"���#�*5

� ���#"���#�����#"����3���#"������#

� ���#"�����"�� �#���� ��

A��������#�#�������"�����#"���"�������+�#�����#�"�� �#"���������#����"+��#�����#���#����#��#��������#�#�����

����"�� �#���� ������"�+���#"���+���#���+� ��"���#�. ��#�������#���#5

#���������

(������ ,19223-

=� ���+���7���+��#�"������#��#�"��"��#�����#��

����������� ��.��"�� �����"����#���������#

�� �� �#"���

���� (���� �����

,19222?-

����� ����������������#��������#����

�����#����+��#����� �� �#"����+� �.�������"�������

����������#�

����� #����� ,19229- G����D�"���+�����������#"��������"@�����#"��

����#"�����#���������� �#"����"� ���� ������+���#��

)��#"���7�#��#�. ��

��� �� #������ #�����

,19224-

����:" ��+�7�#�"� �#�. �����"���"�+���#"������#��

��#�"� ��D�"����#������ ��� ��+�#���." �

Product Costing and Manufacturing Accounting

3–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��� 5����� ,17628- ������#�<�����#�. �����"�����#�+����������"#��

������#"�������#"���

���� (���� ��������

,17627-

����-#������)�+������#�. ��"���#"+"��#�����#�

��#"���

���� (���� #�����

,19222;-

������*����#��7�#��#�. �����"���#�����*����#�

�++"�"�����+��#��

���� #����� ,17626- ����-#���7�#��#�. ��#���#��� �� ��� ���������#���

� ������+���#��� ���#� ��� �#��#����"���#� ��� �

���� ����� ,17624- ����-#���:�����#�. �����"���#���������#"�����#

D���#"#��

=���� #������:�����

,122636-

����>���"��7����0)�#��#�. �����"����#�����

+��#��+���3#����#�

(��� (�������

,19224;-

������#���������#�#�. �����"���#����� �� �#"���+�

�3#����#�

�����"�� �#����#�)� ������������#�����#��+�� �#�����������#�"������ ��� ��+�#�������#�"#��H�." ��+���#�"� �#���"����#���#�#� ���#�+��#�������#"#���

Creating the Costing Exceptions Report

1���#���6����#���#"���)���#������B> �� C����������#"����3���#"���

Before You Begin

� ��#�#������"#�� ��� �+��#������������"��9���#�. �� �0�7

:�+�������� ����"�� �#�����#�����#�����#"����3���#"������������������������#�������#��"#�����������"���#"+�"���������. �����"�#����"#�����"#����(���3��� ���+�����. ���"����"#����"#���#�����#"���

�������������������E������"��9���#�. �� �0�7��A��������#�������������#��������������A���������+"���#������"#�� ��� �+���������������#������#��#�"������"�#��+���������������1���3��� ���"+� �.����#�+���B@��C�"����"���#��#��3���#"���"���������������������� ���"���#��#������������"������"#�� ��� ��A�������"��"��#��"��#�������"�����#"��#����"�"���� ��� ��+����������#��#��������#�"�� �����"��#������#�

Creating Simulated Costs

3–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"��� "#�"���#"+"��#����������. �����+�� #����"#���##"���+��������+#������E��������������5

������� ����� 62 4��������#"��� �#�"@��+���#��

��#����������@��

7���"����������@��

������� ����� 42 6��������#��"#��." ��+���#�"�

:" ��+���#�"� ���������#��"#�����D���#"#�

������� ����� 92 4����#���������#�E���#�"� ���#

4����*����#��E� �.���#�

4����*����#��E��#��� �.���#�

4����*����#��E� �.����"�. �����������#�

4����*����#��E� �.��+"3������������#�

4����*����#��E�����"�������#�

4����*����#��E�����"�����"�. �����������#�

4����*����#��E�����"���+"3������������#�

6�������"#����"#���#�����������#

������� ����� 72 4���#��+����*����#�

������� ����� 82 7���+��#����"#����"#�����." ��+���#�"�

7���+��#����"#����"#�������#"��

A������ ������#�#�����. ����������#�����#"����3���#"������������"�.�+������#"�����"�� �#���� ���

See Also

� "./0/12����� ��������� ����"��#���"�������!� ���+�������#���� �

� ����� � ����������� ����������"��#������������ ����� ���!� ��������������� ����������� ����������+��"�+���#"����.��#������"���#�����"#�� ��� �+��9��� �0�7

Product Costing and Manufacturing Accounting

3–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Costing Exceptions

Error Message

Enter the minimum message level to appear on the report.

Error Message ____________

Cost Method:

Enter the cost method to base costing errors on (i.e: 01, 02,...). If left blank, cost method 07 (standard) will be used.

Cost Method ____________

Enter the Purchasing Cost Method to base costing errors on (ie: 07, 02, ...). If left blank, cost method 07 (standard) will be used.

Cost Method ____________

Creating a Simulated Rollup

1���#���6����#���#"��������B> �$8C���������"�� �#���#������)� ���

Before You Begin

� ���#��#�����#"����3���#"������#���������� ����%������ ��������� ���"������

9��#����"�� �#����#�)� ���������#���� �� �#����#�.�����������#��#"�� "#��#"�������������������"���#����� #������#����#���������#��

�����������." ��+���#�"� �������#"����#���������������+"#�+����." �����.�#���D���#"#����#����#���������#"�����#�D���#"#���-+��������." �"+������#������������#���@���.�#���." �

1��#����#���#���� �� �#��:���������#���������#��� ��+�#���+� ��"������"#"�����#�.����#5

� (���#"�������#"�����#����������*����#���"#���#��"��#�����*���#��7�#��#�. ��+��#�����#���������#�#���"� ���

� ����#��������#"�����������#�����#"�����#�"��"��#�������� �����#"��B#��#�"��#���#��������#"��������"�. ��*C�

� �����++��#"�����#�����#�����#"�����#�.���� "���������+�� #�+��(��+��#��"�#�������#���#��

Creating Simulated Costs

3–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)��"���#���+� ��"���#��"��#������#����#���"�� �#���#������� ��5

� ���� �#"����"� �

� ����#"������

� 7�#����#"��

� 9�"#��+������������"��

Cumulative Yield

���� �#"����"� �����"���"���+"�������#�����#"�����++��#� �.����������"������"��#���� ����� �� �#"�����������������#�.���3�������#���.#�"��$�������#��"� ���#�#��� �#�����#"����-�����"���+���#"����#���������#�.���/�#��������"�� �������+� ��"����3��� ��" �#�#��������#"����+�����"�++��#���.������ �#"����"� �5

���� �#"���A"� ��N��2M�B���2C

5���� #���� �����

������ B��� 2 2 2

��� B��� 2��� 2��� 2

1�����������#"����#��� �.����������"������������/�#���.���"�"�"���#������.��#������� �#"����"� �����#������������#��++��#���

Operation Scrap

����#"����������+"�������#���." ��+���#�"� ���++��#���#�"� ���#��� �� �#"��"��#���� �������������#�"� ���#�.���#����������#"���"������#���.#�"��$�������#��"� ���#�#��� �#�����#"�����������#�"� ���#�"��� �� �#����#���D���#"#��+�#�����������#�"���/�#��������"�� �������+� ��"����3��� ��" �#�#��#���++��#��+�����#"������������#"��5

6���#�N�(

��������#�N�:

;���#"#�����N�

��#��+�:�N�2���

����#"�������N��M

��#��+�:�� ���"�#������#�"#���(�N� �3�$����3�2�N�$&���

Product Costing and Manufacturing Accounting

3–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Master Routings

�������������#�����#����#"���+��#���"#���+���#���)��#"���7�#��#�. �B1 �� C�"+�� ��+�#���+� ��"������#��5

� ����7�#��)��#"���+"� �����#���7���+��#�"������#��#�+���"��#�#��A+��#���.�����

� ��������#�"#����������E�+������"#�����+"����+����#����#"���B������E�+������"#�����#�.����+"�����"#������E�+������#�����+7)�����#���(����+"� ����#�.��. ��*�C

� (��"#�����#"������.������+"����+��#�����E�+������"#���

Unit of Measure Conversions

���������������#�� ���"#��+�������#��#����"������"#��+�������+��#���������+�#���� ���

����������+�#�����"#��+�������"�����#��#���"#��+��������#��������"���D��#"���"�� ����#���#��������#������� ���+���:����06 ��#�7���+��#�"����#�������+� ��"����3��� ��" �#�#���������"���"��� �"�������#��#���"#��+�����5

� ��������#�N�:

� ;���#"#�����N�

� 6"������"#��+�������N�>(�B���"�� ��� ��C

� ��������#���"#��+�������N�>6�B��#��#��� ��C

� �#��������#�����N�2�M

� ��#��+�:�N�2�����B+���#�����#�<�����#�. �C

� ��#�� ���"�#������#�"#���N�OB �0��2C�3�2�P�N� �����

See Also

� ���� ��� ������������+��"�#��#"���#������#������+�@�����#��"#��#��"�� �#����� ��

� #����� ��#�������� ���� �������"������#����"����3��� �

Processing Options: Cost Simulation

Default Tab

���������"�����#"�����+"���#�����+�� #��� ���+����#��������#���#����

Creating Simulated Costs

3–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. As Of Date

��"���#��"�����#����#��"�����"�����#"�������." ��+���#�"� �+�������"#���������"��#���� ����.�������#��"��++��#"�"#����#���-+����� �����#�"�+"� �. ��*��#������������#�������#���#��

2. Cost Method

��"�"�#�����#���#����#��#��" ����#�"����������"�� �#�����#�"��#�����#��������#�#�. ���-+����� �����#�"�+"� ��. ��*��#����������� �� �#����#�+���#���#�����!�B#��������#C�

Processing Tab

���������"�����#"�����+"�������"����"#�"��

1. Single Level

9��#�"�����"�����#"���#�����"+�����#����������#�#��"�� �#����#�+���� ��#���"#�����"#�����"#���#����#"�������#�"���� ��"��#���." ��+���#�"� �1���3��� ��������"��#������������"#���#��#������#��.����#����.�#���������#����#�#�����#�� ���������#��-+�������#��$��#������������#�����#��+#��� ���E ��� ���������#�#��� ����#�����#�+��#�������"#����.�#�������#���#�#��� ���E ��� ���������#�#���� ���

-+����� �����#�"�+"� ��. ��*��#������������������� �#��� ����+�� �#����������#����#���� ��#�������#�"#������.��"��#�����#��� ��#"���

-+����������#"���"#���"�����������+��#�"���� �����#�����#"���. ��*������������� �#��� ���#����#�#���"����"��#�

=� "���� �����5

. ��* 6�+�������� �#��� ���$ 6�+�����"�� �E ��� �� ���

2. Clear and Recalculate

9��#�"�����"�����#"���#�����#� �����#����������� �� �#����#"��E� �#����#�

=� "���� �����5

. ��* A�������� ����#��:$'�8���#���#���"���#�������������"#����##��#��������� ����#����

$ ����������� ���������� �� �#�� �.��������������+������+��#���"#������"�"�#�����#����������#"���+��#�"�������

Product Costing and Manufacturing Accounting

3–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ����������� ���������� �� �#�� �.��������������+��� �"#����9�#�"���#"���"+��������������������#��"#����#"����������������#���� �� �#�� �.����#��+���3��� ���"����#"���#���

����������� ��� �.��������������+��� �"#����.�#���� �� �#�� �.�������������+������+��#����"#����� ���9��#�"���#"���"+�����#�������+�������+��#����#�������������"������#��#� �.����������������� �����+��#�����������"#���

3. Cost Method

Purchased items

9��#�"�����"�����#"���#�����"+��#�����#���#����#�������#���"���#�+��#����#��+���������"#����-+����� �����#�"�+"� ��. ��*��#���������������#�#"������#�+���#�����#�<�����#�. ��B18$�2C�

Outside operations

9��#�"�����"�����#"���#�����"+��#�����#���#����#�������#���"���#�+��#������������#��+���#"�������#"����-+����� �����#�"�+"� ��. ��*��#��������������#��#"������#�+���#�����#�<�����#�. ��B18$�2C�

A������ ����"+��#���+� ��"����.��#�������#"�������#"���.�+���������#�"������5

� A���������#�������"#���.����0� ��#������+��#���L�6�"#�����"#������� ����#������#���6������*����������

� �����"����� "����#�"��#�����#�<�����#�. ��B18$�2C�+��#�����#������"+"������

Print Tab

��"�����"�����#"������"+"����"���"#������������#�����#��"�� �#"�����#�

1. Print Items

9��#�"�����"�����#"���#�����"+����"���"#������������#�����#��"�� �#"�����#�

=� "���� �����5

. ��* �����#��"�#$ 6"�#�� �"#��� 6"�#���������"#��

Creating Simulated Costs

3–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Process Mfg Tab

-+�����������������+��#�"����#�"�����"�����#"����� �� �#����#�+���E0.�E�����#�

1. Calculate Co-/By-products

-+�����������������+��#�"������#��$�#���� �� �#����#�+����E0.�E�����#�-+����� �����#�"�+"� ��. ��*��#����������� �� �#����#��� ��+��#�������#�����

=� "���� �����5

. ��* �����#��� �� �#�$ �� �� �#�

2. Calculate and Clear Costs of Ingredients

9��#�"�����"�����#"���#�����"+�����#���#����#���� ���������� �� �#���E0.�E�����#���#�

-+����"����"��#��+��������#��#�����"�� ����"����#��� ��#"���"�� �����E0.�E�����#��+����#��������#��#�"���#�"�� �����"����#��� ��#"������#��$"��#�"�����"�����#"����-+����� �����#�"���#"���. ��*��"�� ����.�#�������"��#�����#��� ��#"�����#���"���#����#���� ���#�����#��+�#�����E0.�E�����#����������#�"�� ����#�����#��+�#�����E0.�E�����#�"��#���#�#� ���#��+�#�������

=� "���� ������5

: ��* �����#���� �����E0.�E�����#���#$ �����#���������#�� �����E0.�E�����#���#

Product Costing and Manufacturing Accounting

3–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Simulated Cost Components

(+#��������������#���"�� �#�����#����"�����#"���"�+���#"���#����#��"��#����++��#��+�#�������#�� �������"���)��"��#�����#"���"�+���#"�������������������#��������#�����#���1�@���9���#���������

��*"����"#��"�� �#�����#���������#����"#��+�#���+� ��"���#�*5

� )��"��"���������""���"�� �#�����#���������#

� )��"��"���#�����#��"�� �#"������#

� )��"��"�����#���." ��+���#�"�

� )��"��"�������#�����#"��

Reviewing and Revising Simulated Cost Components

A�����"�����#"���"�+���#"��������#����"�� �#�����#�����"��#���� ��� ��+��+�#�����#���������

A���������������� ��"�� �#�����#��A��������#�������"�����#"���"+�������#�#������� ����"�#�"��#�����#"�����#���������#�B:������C�������#��##����+���.�"�������"##���

A�����#��� �#����#��#�#���." ��+���#�"� � ��� ��#���"���#����������1��3��� ������������#��� �#����#�+�� ���E ��� ���������#�.�� ���#"���#������#�"#����-�#����� ���#��#�����������#�"#������.������������#�����#+��#�����������#�������#���������#���*��#����������"�����#��������#�#����"���� ��� ���������#���������#�"#�����#" ��������#����"�� �#����#)� ��������������� �#����#"�������"�����#�B��� ����#���������#�3C���� �#��#�����#���������#�+���#�����#"������������ �#��#�����#��������#�������#��������� ���+�����#�0���������#���������#�

&� ����� �� ����� �������� ���� ��������

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

Product Costing and Manufacturing Accounting

3–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������������������ "�*��� ��#�

Working with Simulated Cost Components

3–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����#����#���������#����"���#���+� ��"���+"� ��"��#������������5

� �"�� �#��

� ��#�<����

� ��#�7�#���

����-#�����#���#� ��� ������#���#�#� ���#��+�� ���#���������#����+#��� �#���#�"�� �#"���+��"�� �#����� �����������+�#��� �#�+�@������#��+��+�@����� �����"�� �#�������+�@����� ������+���#�����#��������#�#�. ��B1 ���&C�

-+�#���������+"������"��������.�#�����#���1�@�����#� �������#<�������#� �+"� ���"#��"�� "��#�.�#��+"� ��

����)��"��"���#�����#���������#�0�<�����-�#��"#��)���#�+�����"�+���#"����.��#������"���+�@���������#� ������� ���

8� )��"�������"��#���+� ��"���+"� ��"��#�����#�" ����5

� ��#�����

� �"�� �#���4�#�(����

� �"�� �#�����#�

A����"��#����#�#���"���#�����#�" ��� �� �#"���+�������+�#�����#E������� ����������� �������� �� �#���+�����*����#����#�����*����#��#�����������+��#�"������#��#�

2� ��������#�����#�" ��� �� �#"���+��#�����#E�������� ����+�����#"�����#��������#�B:����C��������#�����������#������������#��� �� �#"��+���#���)��������

Product Costing and Manufacturing Accounting

3–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� �����*��"#����*����#����#���������������#"�������� "�*��� ��#�

��*��"#����#��� �� �#"��������� E#"�����#���������#��"��#�.��"++���#�+���#��������������#����#���������#��"+�����������������#���"#��H���#"������*����#���#���������+��#�"������#��#"�������� �#����#����"�� �#����#�)� ����������

Working with Simulated Cost Components

3–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� ���� ���� ������������+��"�#��#"����.��#�����#�����#��#�����#���������"��"��

� #����� ��#�������� ���� �������"������#���"����3��� �

1��� / ������

�"�� �#���4�#�(���� 9���#���� �� �#����#���"���#���"�� �#"��������

��*���� � �� ����� ���������������������������� ����������������������������

��"�"�#�����#�#��.�" ��#�"�"#����#�#�"� ��� �"��#���." ��+

��#�"� ����"���#�������#�"�� ������#�"� �B ���E ���

��������#C����������"����.����#���4�#�(��������

��#� ��� ����"��"��#��"+�#�����#����"�� �#�����+�@��

�� ���

�"�� �#�����#� 1��#�����"���#�����#���#���������#���� �� �#��#�����#

�+�� �#��� ���� ��� ���"���#���"�� �#"��������

��*���� � �� ����� ���������������������������� ����������������������������

��"�"�#�������+�#�����#���������#��#�#�"� ��� �� ��#��

����+�#���#�#� ���#��+�#���"#��H��"��#���������#

B��"���"�� ����#����"#��H� ���E ��� ���������#

��#�C���������"����.����#���4�#�(�����������#�

�� ����"��"��#��"+�#�����#����"�� �#�����+�@��

�� ���

Processing Options for Cost Components

Process

Enter a ’1’ to allow input into the routing calculated cost types. (i.e. cost types: B1, B2, B3, B4, C1, C2, C3, C4).

Routing Cost Entry ____________

Enter a ’1’ to allow input into the Total Simulated Cost

Total Cost Entry ____________

Product Costing and Manufacturing Accounting

3–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What You Should Know About Processing Options

0������ ,6- -+��������#�#����"�#�"��:$E�8���#���������#������ ����#�#�"

����"�����#"���#��$��-+����������#��#�#�"�����"�����#"�������

�����#���#����#��"�#��#���:$E�8�+"� �������+"� ������� �� �#��

"�#����.��#����"�� �#����#�)� ���������

-+����������"�#�"��#������������#������ ���#����� �����

����"##���.��#����"�� �#����#�)� ������������ ����������

�#�#�������"�����#"���+��#��#���������#�#���� �� �#�� �.�

������������

����� ������ ����� ������"������

Reviewing the Cost Simulation Report

�����"�� �#����#�)� ��������������#��#����#��������#��"�� �#"������#��������#�����#������"�����#��+�#���"#����#���"�� �#���� ��������#�����#�����"�����.�#�����#���#����

(+#����"��"���#���"�� �#�����#��������"��"�����#�"�+���#"����������#�"�� �#�����#����"��#��"�� ����#����������

See Also

� ���� ����� ������"������+��"�#��#"����.��#����#"���#���"�+���#"��"��#������#

� "./0.32�&�����������������*� ������������"��#���"�������!� ���+������#���� �

Reviewing Costed Bills of Material

�++��#"�����#�������+"#���/��#"������������������#��������������"���"#����#�"�+���#"����9����#���:" �-�D�"��#���"�����#�+��.�#������#�"#��������������#�#���"#�����"��.����#"������������������ ���"���+��+�#����#��+�"#����

�����������"� �������"@�����#�+��#����"��#���������#��+�������#"#����������#E����������#�#� ���#�+��#�������#�"#�����+� ��5

� 1��#�������#�"#����#�����#��"� ��������#�����#E��������#��������#�+���#�����#���������#�#�. ��

� 1���������������#��#�����#��"� ���������� �� �#���.�������#���I��+J���#��+���#���." ��+���#�"� �����#�����#���#������������������

Working with Simulated Cost Components

3–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���#���I���+J���#��#��"������.� �#����������#� "���"��#���." ��+��#�"� �

1���3��� ������������"���� ���#��+�����+��#�"���������#�"#����"�� ��"�����. ����.���. ���������������#���#��-�����"#"����#�������+��#�"����#��+�����������#�"��"�"����"�#��#���+"��������+"������#���"��+�����"���#"����� �� �#"��5

� 6�����

� <�.�

� 7���"��

� �������

� �3#�

��"���#���:" �"�D�"���������� �� �#��#�����#����"�#����"#���������#��������#�"��#�������������#����"�� �#����#�)� ���������

����+����"� ���#���+� ��"��5

� 4�#E��������#�+��#�������#�+���#�����#���������#�#�. ���#�#���#���+�#���+��

� ��#�.��*�����+��� ���3#E ��� ���������#�

� ��#� ���#��+�#�������#�"#���+���#�����#���������#�#�. ���#�#��.�##����+�#���+���

� ��#� ��+�� ���#�+��#�������#�"#������#��� �#� "����+�#���+����#�#���+�"��#

�������������������� �#�����������#�+�����#��2�����������#��������." ��+���#�"� ����������#�.������2��������#�"�� �����"��#�����#"��������

@���5�������#������*��"#����#���:" ������ E#"�����#����#��������������"+���������#��#���." ��+���#�"� �����#"���+�����"#����������#����#��������#�+����"� ���#�����#�#��#���������#����������������"�� �#���#�)� ����(����� #��#����� ����"��#��"++��+���#���������*��"#����#��:" �"+������������������#���." ��+���#�"� ����#"����������+��#�"������#��#"�������� �#����#���� ���������

����#�#� �����"#���#�#� �+���#�����#���������#�#�. ��B1 ���&C����� ����#�#� ��� �� �#���"���� E#"����������"���������������#�#�������"�����#"��+���� �� �#"���#�#� �

See Also

� ����������� ������������������������������������ ����������� ��#���"��#����#���

� #����� ��#�������� ���� �������"������#���"����3��� �

Product Costing and Manufacturing Accounting

3–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� ����� � ������ ��� �� �������

1���#���6����#���#"��������B> �$8C����������#���:" �-�D�"��

$� �����*��"#����#���:" ������ �#��#���+� ��"���+"� ������� "�*�1"��5

� :����06 ��#

� 6���#�-#��

�� )��"���#���+� ��"���+"� �5

� (��+���#�

� ��#�7�#���

� )�D��;���#"#�

� 9�"#��+�7�������-���#

� �*"��#����D�Q

� ����-#���4��.�

� 6�����

� <�.�

� 7���"��

� �������

� �3#�

� ��#�

� �������������������������#�" �+���#���)��������

Working with Simulated Cost Components

3–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8� �����#���:" ���#�" ����"���#���+� ��"���+"� �5

� ;���#"#��6�

� �++��#"���1��

� �++��#"������

� ����#"��������M

� 6����#��+�����

� 1��#�����#�M

2� � "�*������ �

&� �����*��"#����#���:" �����������������#�����������4�3#�+���#��)��������#�������#�����#���." �"�+���#"���+��#�����������#�

Product Costing and Manufacturing Accounting

3–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

!� ���#��� ��.�#�����+�@�������"�� �#�����#��������1�@�����"�� �#���+���#���="��������

�� �����"������"#��H���#�.��*�#���������� ����+���#���1���������

Working with Simulated Cost Components

3–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

(��+���#� ������#������+���++��#"�"#������*"������#�������"+"�

��#��#���"� ����������#�B�����." ��+���#�"� �

��#"��������� "��. �C�#��#�����++��#"���������+#��#��#

��#�����������#��#�����#��"�#�����+�� #��.�#��������

��#������+�#�������#���#��

)�D��;���#"#� �������.���+�����#�"#���#��#��������#�#�����������

�#����� �� �#�� ���� ��� ��� ���"��D���#"#�����#��

���.���+�����#�"#����D��#����1��"�#������"+�"#�#�*�

���������#����������#�"#����#�����"#�����D��#��

D���#"#���+�$���#����#������ ��� ���������#�+�� �

��������#�

�*"��#����D�Q (����.��#��#�"��"��#��#����D�������+�#�����������#

�����." ��+���#�"� ��-#�"�"#"� ��"��"��#��#���� �#"��

�D������"����"�������������#����������#����*"#��

"�� �� ��� �." ��+���#�"� ��A����������"+��#�"����.��#�

�������#����D������"����"���#�����������#���������

#���." ��+���#�"� �

�*"�����+"� ��� �������#����#������������#� "��

���.��#��#��������#�#��.��"��#����"� ����+�"�+���#"���

6����� ��*�(����#�+"� ��+��#���7���+��#�"�����#���

��*���� � �� ����� ���������������������������� ����������������������������

��#�.��*�#�4���$�����+"����+�������+"��������� �0���

����#"���:��*�#��(�����"�����#"������#� ����#��

#����#���������#�.��*�#�$�������B�#�#���#����+�#��

+��C�"�#��#��������#�#� ��+�� ���#�+��#�������#�"#����#

#���.�##����+�#���+���

;���#"#��6� �������.���+���"#�#��#�#����#������ "��#��#��

#����#"���

�++��#"���1�� (���#��#��#�"��"��#�������+�#���+� ��"��5

� ���������������#���#�����"�#���++��#������." �+���#�"�

� ���������#"���#�������"�#���++��#�����D���������#�����#"���+�����"#��

� ��������#������� ��"�"���++��#

������+�� #�"�#�������#��#�����#���A���������#�

+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"@���"��6����#

��#"���������1 ���7��������#�����������"#�

)�D�"����#�6 ���"��������7�#�"� �)�D�"����#

6 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�����

��#��

Product Costing and Manufacturing Accounting

3–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

�++��#"������ (���#��#��#�"��"��#�������+�#���+� ��"��5

� ���������������#���#�"���� �����"���++��#�����." ��+���#�"�

� ���������#"���#���"���� �����"���++��#�����D���������#�����#"���+�����"#��

� ��������#������� ��"���� �������#"��

������+�� #�"������.�� $��+�#�����+�� #�������+"����"�

#�����#���"�#"�����+�����#����������A����A������

��#��+�#����++��#"�����#����#��#�#����#���� ���+�

�����"�����������-#���#��#������� ������++��#"���"�

#���+�#�������#" �.������������������"@���"��6����#

��#"���������1 ���7��������#�����������"#�

)�D�"����#�6 ���"��������7�#�"� �)�D�"����#

6 ���"����#�����#��"����� "����������#�.�

�++��#"�"#����#�����#�.��#���." ��+���#�"� ���""��� ��� �

�����+����"� �����#��.�������#����++��#"�"#����#�����

��#��

����#"��������M (��� ���#��#�#����#������#��"���������������#��

�����#��+���#�"� �#��������#�+�� ���"#�"��#��

����#"���������#�������#��#�"��� ��������#�0������

:" ��+�7�#�"� �������������#���6 ������A"� ��9���#�

������������#����� �� �#��#�"��� ���.�

��������"���#����"� �������#����+���#��� �#

����#"���#��#���+"#�����#"����9��������"�����#"���"�

��#�0�������)��#"���#�����. ��#����#���#���� �� �#�

#�����������#����������#�

6����#��+����� ���������#�����+�����. ����������#���#�"� ����#��

��"���#�������+��#����+�����#"�� ������#�"#������"��

�)6076�07)6������#"����#����#���"��������

�D�"����#�+��#�����������#�"#���#���������#��+�

#��� ��

4�#�5���"�*�"�#����3���#��� ���+�����#�"#���B���

���������������#C�����#��#�������+��#�"��������

��"�*�����������������������#��+"����#���#�#� � �

"��#�������+��#����+�����#"�� ��"#����(����#���"�*

��������+��#�������� ��#������������������#�

� ���"����� �� �#"���

��#�������#��������� �����.�5��2M���2��

1��#�����#�M ����� ��������#��#��"� �������#�+����#��������6 �����

A"� ��9���#�����������#�"��� ���#������#��#��

���� �#"��������#�"��#�����#"�������#�������#"������

�����#�"��#���." ��+���#�"� ��7�#�"� �)�D�"����#

6 ���"������#���#������������#�����#����3"#"��

��������#����������#�#��� �����������#��������

Working with Simulated Cost Components

3–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Costed Bill of Material (P30206)

Display Tab

1. Decimal Places

9��#�"�����"�����#"���#��"��"��#��#������.���+����"�� �� ����#��#�#���#����"� ����=� "���� ��������#��8��-+����� �����#�"���#"���. ��*��#���#����"� ���+������"�� �

2. Totals

9��#�"�����"�����#"���#�����"+�����#���#����#����"� ���#����� �� �#��#�#� ���#���#������#�#� �������� �� �#���#�#� ����#����� �����#�#� �����#������#�#� ����#�����"#���#�+���#�����#���������#�#�. ��B1 ���&C�� #"� "���.��#����D��#���D���#"#���=� "���� �����5

$ �"� ����� �� �#���#�#� �. ��* �"� ���#������#�#� �B��+�� #C�

Product Costing and Manufacturing Accounting

3–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Fixed Costs Based On

9��#�"�����"�����#"���#�����"+�����#���#����#���.���+"3�����#���#���������#"�����#�D���#"#�������#����D��#���D���#"#���=� "���� �����5

. ��* :���+"3�����#����#���������#"�����#�D���#"#��B��+�� #C�$ :���+"3�����#����#����D��#���D���#"#��

Reviewing a Costed Routing

9����#���)��#"���-�D�"��#����"���#�������"@�����#��+����"#���+����������#"���"��#�����#"������"�"�+���#"��������� ������#���++��#"�� �������������#"�����#��1���3��� ����������5�

� ="���#�����*����#������". ��+���������#"��

� ��#��"���"+�����*����#����+����� #"� ������#"��

� �"� ���"�� �#�����+�@�����#�+�� �.���� ���+����#���#���

� �� �� �#��#���#�#� �+��� ���#�.����#���#���"�

��"��������� �� �#��#�����#����"�#����"#���������#���������#�"��#������������#����"�� �#����#�)� ���������

�������������������� �#�����������#�+�����#��2�����������#��������." ��+���#�"� ����������#�.������2��������#�"�� �����"��#�����#"��������

@���5�������#������*��"#����#���)��#"���-�D�"������� E#"�����#���#���������������"+���������#��#���." ��+���#�"� �����#"���+�����"#���������#����#���������#�+����"� ���#�����#������#���������������"�� �#����#�)� ����(����� #��#����� ����"��#��"++��+���#���������*�"#����#���)��#"���-�D�"��"+������������������#���." ��+���#�"� ����#"�����*����#���#���������+��#�"������#��#�"�������� �#����#���� ��������

Working with Simulated Cost Components

3–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������������#�����#����#"���+��#���"#���+���#���)��#"���7�#��#�. �B1 �� C�"+�� ��+�#���+� ��"������#��5

� ����7�#��)��#"���+"� �����#���7���+��#�"������#��#�+���"��#�#��A+��#���.�����

� ��������#�"#����������E�+������"#�����+"����+����#����#"���B������E�+������"#�����#�.����+"�����"#������E�+������#�����+7)�����#���(����+"� ����#�.��. ��*�C

� ���"#�����#"������.������+"����+��#�����E�+������"#���

&� ����� � ������ �����

���#���6����#���#"��������B> �$8C����������#���)��#"��06����-�D�"��

$� �����*��"#����#���)��#"��06��������� �#��#���+� ��"���+"� ������ "�*�1"��5�

� :����06 ��#

� -#���4��.�

�� )��"���#���+� ��"���+"� �5

� )�D��#���;���#"#�

� (��+���#�

� ��#�7�#���

� �*"��#��������D�

� 6������

Product Costing and Manufacturing Accounting

3–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �3#�

� ��*����#�

� ������DQ

� <�.�

� 7���"��

� �������

� ��������#

� ��#�

� ���#��� ��.�#�����+�@�������"�� �#�����#�������*��"#����#��)��#"��06�����������1�@������"�� �#���+���#���="��������

8� ��������#�" ����� �� �#"�����������������#"��������#������������#�" +���#���)��������

2� �����#���)��#"�����#�" ����"���#���+� ��"���+"� �5�

� ��#����

� ��#�����

� ���"�#"��

� ��#

&� � "�*������ �

!� �����*��"#����#���)��#"��06���������������#"���:��*�#��"����+���#���1��������#����"������"#��H�����#"���.��*�#��

Working with Simulated Cost Components

3–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����#"���:��*�#�F����"��������������"�+����"� ���#�����#��������#�����#���.��*�#�"�#����"���#��������������

See Also

� ��������� ����������� ����������+��"�+���#"����.��#��##"���������#"���.��*�#������B �0��C

� #����� ��#�������� ���� �������"������#���"����3��� �

1��� / ������

)�D��#���;���#"#� �������.���+�����#�"#���#��#��������#�#�����������

�#����� �� �#�� ���� ��� ��� ���"��D���#"#�����#��

���.���+�����#�"#����D��#����1��"�#������"+�"#�#�*�

���������#����������#�"#����#�����"#�����D��#��

D���#"#���+�$���#����#������ ��� ���������#�+�� �

��������#�

��*���� � �� ����� ���������������������������� ����������������������������

�������.���+�����#�"#���+����"����������#�#����

��#�.��*��������#����+"�����"��D���#"#�����#��

����#�"#���

Product Costing and Manufacturing Accounting

3–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Costed Routing Inquiry

Defaults

1. Enter the cost method (ie., 01, 02, 03) to be used for Sub-Contracted Items. (Blanks will default to a “01”)

Outside Operations Cost Method ____________

2. Enter the cost method (ie., 01, 02, 03) to be used for Purchased Items. (Blanks will default to the cost from the Mode, ie., Standard Cost.)

Purchased Cost Method ____________

Display

1. Enter a ’1’ to display the costs ’UP TO’ and including the operation sequence entered in the ’Skip to ’ form control. If left blank, the costs will be displayed beginning with the entered operation’s costs.

Skip to flag ____________

Process

1. Enter a ’1’ to include cost buckets 1 and 2 in the total. If left blank, the total will only include costs buckets 3-6.

Include 1 and 2 in total ____________

3–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Updating Frozen Costs

1���#���6����#���#"��������B> �$8C��������1�@���9���#��

(+#��������+���"�� �#���� ���#����#��"���#����++��#��+������������������������#������+�@�����#��"#��"�� �#����� ���.�����"�����+�@�������#��7�#�������"�����#�"��������#�#���.��"��"����+�������+"�� �����#�����#�#��"�����+��#�"�����#�+��#�����3#�+"�� ���"����

Before You Begin

� �����#��#�����������#����"#�����#� ��� ����#���"�"#"� �-#���7�#�-�+���#"���+����������##"���9��-#�����#�<��� �

� ��#�#�������"�����#"���#�����"+��#�����#"�����#����#��#��������#�#����

@���5���"����������#�����#������#���.��#�����#�����#���"����+�#���"�� �#����#�)� ����������-+������������������"�+���#"���"����#��� �#"�� �#�����#�� ����#������������" ���#�.���+ ��#���.��#���+�@�������#��

����1�@���9���#�����������#�����#�#��#����������#���.��#����"�� �#���#�)� ���������#�5

� 9���#����"#���#�"��#�����#�<�����#�. ��B18$�2C�+��#�����#���#���� ��#��

� 9���#��+�@�����#�"��#�����#���������#�#�. ��B1 ���&C�+��#�����#��#����� ��#��

� 9���#�� �.���������������#��"��#�����*����#��)�#��#�. ��B1 ����C

� 6"�#����#�#�#� �.�����������.����0� ��#������>0<���#���������

� 1����E�����.� ���������#�����-#���:� �����B-:C������"��#���-#��<�����#�. ��B18$$$C�"+�#�����#���#����� ��#�����#����#��� �0"����#�����#���#����+�����"#��

� 1����E�����.� �������"#��/���� ���#"��#��#���(�����#�<�����#�. �B1�%$$C�"���"#�����#�" ���������+���#

(��"#��� ����������"��"##���"+�#�����#���#����� ��#���+������#��"#���� ������"����#�����#���#���������"#��� ����������"��"��#����������"��"����#����� ���+��#�������#���"#�����������.���+�"#�� �����������"##�������������#�����#� ��� ��+�#���"#������"���"��+"����"��#���-#���7�#��#�. ��B18$�$C��1���3��� ���"#����#���#� ��� ��

Product Costing and Manufacturing Accounting

3–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��� ����������"#��� ����������+�������.����0� ��#��#���"���#��������+"�����.��������#������"++��.��.����0� ��#�

�������������#��/���� ���#"��"���"#�����#�" ���������+���#�#��#��#����"�������#���"#��#���"#��� ���������������#�����������"�#�"�"�#��"#��.�#�����#���-#���<���������#���(�����#�<������9��#���-#��<����0(�����#�-�#��"#�����#�#����"+��#�"�"�#��"#��

���������+ ���+������#"���+�@�����#�"���+� ��5

� �������������#����/���� ���#���� ��"+����"#��� �������������.����"##���

� (��"#��� ����������"��"##����� ��"+����"#�����#� ������������.��������#���

� (��"#�����#� ����������"�����#����� ��"+�����#���������#��������.��������#���

����������������#���+� ��"���((-�#���.#�"��#����./��#�������#5

++� ����� ����� .������� '��

8$ 8 -����#�� ��."#�#������"������"��"#�����#

���"#�#�������������"��"#�����#

8$ & �3���������>� ��."#�#�������3������� �

���"#�#������"����������"�

����+� ��"��� "#�"���#"+"��"�+���#"���� ����#�#����#�" �����������/���� ��#"�5

.���� C����� ����� �������������������#������ �/���� ���#"��.����#

��������#�+��#�������"#�������.������������"�����

���������#����#���((-��

-+�������������#�" �+���#��#������������#����#��"��

��."#��������"#�������#� ����������+�������"#��

�������������#����9��#�����#�" �+���#���������

���#�����#�" ������"#�#�" ��G����������"���#��#�#��

��#��#"� ��� ����"� ����������� ��������"*�����

��. ���

������� C�����

�����

-+�����������������+���#��#������������#����."#

�������"#������.���.#�#� ��+���������������

������ ������������#����#"���#�����9��#��������

+���#�#��������#��������#��+���#�" �"��#��������

������A�������#" ���������#�#�����"�������#�" ��

���"#�#�" �

Updating Frozen Costs

3–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����������������#���+� ��"�����#��#5

/���� �������� ��������������������������"+�"#�+"������

����� � ����������" ��+���##"���#���/���� ���#"��

�������������"��"��#��#����������."��#"����+�((-

���.���������#����.�������>0<�� ������������#����

����������#���1�@���9���#�����������"���A������

�"���������"��#�����.�"##�����.�;�����"��#��

��� �������*����#��

���� (��� 5����� '�����

������

��"����#�����#����++��#��+�#���"����#������ ��#"��

.�������#���������������#��#�����#���""�������

+��#���"����#���"#����A��������"�#�� �"#������� �

#����#��#����������#���������A����������#������#�"�

���+��������+"�� ��������������#����"���#��

+� ��"���"�+���#"��5

� � ������������#�+�����������#���"#��� =�"�����.�#������ ������������#� -#���D���#"#���������� 4�#������#��+��������"����#� ��������+�#��������#���������.��"#��������

�������#����� >0<��3���#"������ ���#���>0<�#����#"��������.�����"##��� �"#���>0<��.#�#� �.��������������>0<�� ������

��>0<�� ��������� �

See Also

� ���� ���4���������� ���+������"�+���#"����.��#���#�" ����������/���� ���#"�

� "�( �+ ����������� ���##&��+��"�+���#"������#���((-�#��#�������

� ���� ������##&�� ��� ��� 5�� ����6�����"��#���&�(�����6��������

!� ��

� ���� ���+ �%���� ������ ��� ��� ��� 5�� ���"��#���&�(�����6��������

!� ��

� "./0.72�&��������'������������"��#���"�������!� ���+�������#���� �

Product Costing and Manufacturing Accounting

3–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Frozen Update (R30835)

Default Tab

���������"�����#"������"+��#�����+�� #��� ���+����#���#��������I���+J��#��

1. Cost Method

��"�����"�����#"������"+"��#�����#���#����#��.������#���"��#�����#��������#�������#�<�����#�. ���-+����� �����#�"�+"� ��. ��*��#���������� �� �#����#�+����#���#�����!�B#��������#C�

2. As Of Date

������#��#��#���#��"�����"�����#"�������." ��+���#�"� �+�������"#���#���#������"��#���� ����.�������#��"��++��#"�"#����#���-+����� �����#�"�+"� �. ��*��#����#������#�������#���#��

Processing Tab

���������"�����#"�����+"�������"����"#�"��

1. Update Costs

�����$�#������#����#��-+����� �����#�"�+"� ��. ��*��#������������#��3���#"������#���������������.�#�������#�����#����#�

=� "���� �����5

. ��* �����#�����#�$ 9���#�

2. Single Level

��"�����"�����#"���� �������#������#����#�+����� ��#���"#�����"#����"#���#�����#"�������#�"���� ��"��#���." ��+���#�"� ��1���3��� ��������"��#�����������"#���#��#������#��.����#����.�#����������#����#�#�����#����#�"���� ���(+#���������#��"�� �#�����#�+��#�������"#���������������#��"#�+�@�����#��"#���#�����#"���#�����#��+�#��� ���E ��� ��������#�

=� "���� �����5

. ��* ���� �#��� ��$ �"�� �� ��� �� ��

Updating Frozen Costs

3–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3. Update Work Center Rates

-+��������#���������"��+"�� ������B���"+"���"��#���9���#����#�����"����#"��C��#����$�����#��� ������#��� ��#��"��� ���*����#��"��� .����0� ��#�

4. Use Flex Accounting

-+��������+ �3�������#"����#����$������������ ��*�+������+ �3�������#"��� ��#����#��"�������#������ �#��#�����#��./��#�+"� ��

Process Mfg Tab

-+�����������������+��#�"����#�"�����"�����#"�������#����#�+���E0.�E�����#�

1. Update Co-/By-Products

-+�����������������+��#�"������#��$�#������#����#�+����E0.�E�����#��-+���� �����#�"�+"� ��. ��*��#�������������#����#��� ��+��#�������#������

=� "���� �����5

. ��* �����#�����#�$ 9���#�

G/L Tab

���������"�����#"�����+"�������>0<��"#�"��

1. G/L Date

9��#�"�����"�����#"���#�����"+��#�����#��#��#����������-#���<����#����#"�������/���� ���#"���-+����� �����#�"�+"� ��. ��*��#�����������#����#�����#��

2. G/L Transactions

�����$�#�����#����#�" ���>0<���#"��+��-#���:� �����B-:C�#����#"���B�����#��+�������"#��C���������#�����#������"@���>0<���#"��B������#��+������������#C��-+����� �����#�"�+"� ��. ��*�����>0<���#"��������#���

Product Costing and Manufacturing Accounting

3–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Print Tab

��"�����"�����#"������"+"�����#���� �"#������� ����������"#�����������#���-#�����#�<�����9���#�����#�

1. Print Items

�������#��"�� ������ ����������"#���������$�#��"�� ����� �"#����-+����� ����#�"�+"� ��. ��*��� �"#������"�� �����

3–47OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Costing Information

(+#���������#���1�@���9���#��������#����� �������"����#����������� ���"���#�������#�����#"���"�+���#"�����������#�#���"���++��#���#" �������#�������#�����"���

)��"��"�����#"���"�+���#"������"#��+�#���+� ��"���#�*5

� )��"��"���+�@�����#���������#

� )��"��"���#���"#��� ����

� )��"��"���#����"�� ��<��� ���#���:" ��+�7�#�"� ����#

� )��"��"���#���7� #"E<��� ���#���:" ��+�7�#�"� ����#

� )��"��"���#�����#���������#����#

� )��"��"���#�����#���������#0<�����-�#��"#�����#

Reviewing Frozen Cost Components

(+#���������#���1�@���9���#��������#����� �������"����#������"���#��+�@�����#��

&� ����� ���D� ���� ��������

1���#���6����#���#"��������B> �$8C����������#�0���������#��������#�

Product Costing and Manufacturing Accounting

3–48 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� -#���4��.�

� :����06 ��#

� ��#�7�#���

�� )��"���#���+� ��"���+"� �5

� 1�@��

� ���#��� ��.�#�����+�@�������"�� �#�����#��������1�@�����"�� �#���+���#���="��������

1��� / ������

1�@�� ���������� �#���#��������#�� ������+��� ���

��� �

Reviewing Costing Information

3–49OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing the Item Ledger

9��-#���<�����#���"���"#���.� �����B-:C�#����#"���+�����"#��������1�@��9���#��������#��+��-:�#����#"���#��#���"#��� �����"+�� ��+�#���+� ��"�����#��5�

� ����+�@�����#��������"��#�����#�<�����#�. ��B18$�2C�+�����"������#��#����

� ���#���#���#����"�������#���� �0"����#�����#���#����

� (�D���#"#�����������3"#�

&� ����� ��� ��� ������

1���#���6����#���#"��������B> �$8C��������-#���<�����-�D�"��

$� �����*��"#��-#���<���������� �#��#���+� ��"���+"� �5

� -#���4��.�

�� �����-:�"��#���+� ��"���+"� ������� "�*�1"��5

� �������#�����

� )��"���#���+� ��"���+"� �5

� �����#"�����#�

� ;���#"#�

8� �����"���#�����#�" ��+���#����#"���������������������� "�*��� ��#�

Product Costing and Manufacturing Accounting

3–50 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

�������#����� (������+"���������B��0��C�#��#�"���#"+"��#����"�"�����

�������+�#���#����#"���

�������������������� ���+"3��+���������#�#����

��������������"���"�������"�#������#"�����#�

�����������������#�#������+"3��+���������5

6 (�����#�����. ���������#

) (�����#����"��. ���������#

� �"�������6����������#

- -����#����������#

� ���"����������#�#���

�����#������#���++�##"�����#"���������"�#��+�

#�����������#�#���������������#�.�#����

�����#"�����#� ������#��#��#�������������#����"�#��#����#������"

��#����#��"�����"����++��#"��� ��� �#����#������+�

"����#����"�"���

;���#"#� �������" �. ��D���#"#������.����E�����.� ������"��

����"#���#������#"��������.��*�������"�"���

��+"����"��.����0� ��#����#��#�

Reviewing Costing Information

3–51OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Item Ledger Inquiry

Default

Enter a Document Type. If left blank, ’*’ will be the default value and all document types will be shown.

1. Document Type ____________

Versions

Enter the version to be used for each program. If left blank, ZJDE0001 will be used.

1. Load and Delivery Ledger ____________ Inquiry (FUTURE)

Display

1. Enter a ’1’ to display Quantity ____________ in Primary Units of Measure along with Quantity in Transaction Units of Measure.

Reviewing the Single Level Costed Bill of Material Report

1���#���6����#���#"���)���#������B> �� C����������#���:" �

9��#�����#���:" �������#�����#�������#�#��#� "#�#���#�#� ���#��+�����#"#�����#�" ���.����������#���#��9��#�"�"�+���#"���#������ �����������#��+"����"� �� ���.�����"#�"��������#���#��

A���������#��"@��#�"����#�#���� ������"��������� �"��1���3��� ���������5

� 6����#������#��"��������� "����#���#���

� 6����#������#�+��"�� �#�����+�@�����#

� ����"+������#��"��#�������"�����#"���+�����"���#���"�+���#"���"�#"�����"+����������#����#�#�����#�������#���#�

� 6"�#�� ������#���#����������+"������#���"�����#������#

� 6"�#�#������#�+������.������� ��#���.���������� �.�����

��"����#�����#�#�����������#���#�"��+"�����E��+"������#�.��*�#��-����"#"����#���������#�#� �#�����#�.��*�#�+�������"#�����������#�.��*�#�������#�"������ ���#���������#��������"���������������#������������+"���������

Product Costing and Manufacturing Accounting

3–52 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� ����������� ������������������������������������ ����������� �

� "./77/2��������� ���������� ��"��#���"�������!� ���+�������#���� �

Processing Options for Costed Bill of Material Report

Defaults

1. Enter the “As of” date for the Bill of Material. If left blank the current date will be used.

As of Date ____________

Display

1. Enter the Cost Method to be used (ie., 01, 02, 03). Blanks will default to 07 cost method (standard).

Cost Method ____________

2. Enter the Costs to be printed. ’1’ for Simulated or ’2’ for Frozen.

Simulated/Frozen ____________

3. Enter the number of units to Cost. (ie., 10,000).

Quantity – Requested Quantity ____________

Reviewing the Multi-Level Costed Bill of Material Report

1���#���6����#���#"���)���#������B> �� C��������7� #"E<��� ���#���:" �

9��#���7� #"E<��� ���#���:" ����#�#����"��� "#��+�#���#�#� ���#��+�����#"#�����#�" ���.����������#���#��9��#�"�"�+���#"���#������ �����������#��+"����"� �� ���.�����"#�"��������#���#��

A���������#��"@��#�"����#�#���� ������"��������� �"��1���3��� ���������5

� ����"+��#������.���+���"#�#��#�#�����������#�������������#�����#

� 6����#������#��"��������� "����#���#���

� 6����#������#�+��"�� �#�����+�@�����#

� ����"+������#��+��#���������#����������"#�"������������"��"�+���#"��

Reviewing Costing Information

3–53OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 6"�#�� ������#���#����������+"������#���"�����#������#

� 6"�#�#������#�+������.������� ��#���.���������� �.�����

��"����#�����#�#�����������#���#�"��+"�����E��+"������#�.��*�#��-����"#"����#���������#�#� �#�����#�.��*�#�+�������"#�����������#�.��*�#�������#�"������ ���#���������#��������"���������������#������������+"���������

See Also

� ����������� ������������������������������������ ����������� �

� "./7732����� *'�(����������� ���"��#���"�������!� ���+�������#���� �

Processing Options for Multi-Level Costed Bill Report

Defaults

1. Enter the ’As of Date’ for the Bill of Material. If left blank the current date will be used.

As of Date ____________

Display

1. Enter the cost method to be used. Blanks will default to ’07’ (standard).

Cost Method ____________

2. Enter the costs to be printed 1 = Simulated 2 = Frozen

Simulated / Frozen ____________

3. Enter the units to Cost. (ie. 10000)

Quantity – Requested Quantity ____________

Print

1. Enter a ’1’ to print an indented Costed Bill of Material Report.

Indented Report Switch ____________

2. Enter a ’1’ to print a “Unit Cost” line of detail. If left blank, only one line of detail will be printed for each item.

Unit Cost Detail ____________

Product Costing and Manufacturing Accounting

3–54 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing the Cost Components Report

1���#���6����#���#"���)���#������B> �� C����������#���������#�

9��#�����#���������#����#�#����"���#�����������#���#�����#�#� ���#+�������"#������"�"�+���#"��������+���#�����#����#���������#�+����

A���������#��"@��#�"����#�#�����#��������"+"��������1���3��� ���������5

� 6����#������#��"��������� "����#���#����

� )��"���#�����#�#�����������"�#"���.��"#������.��

� -���#"+��"#���

� ��+"���#����3��#�"�+���#"���#�����������#������#�+�����#��� ��#"����#"����1���3��� ������������ ��#����"+"��"#����������������#���#�"�� ����+��#�����#��+�����E��������3#����#�

� 6"�#�#������#�+����"�� ��"#�������� �"#������� �"#���

A�������"�� ���������+�#�����#���������#�#��#�������+"���+�����"#���"��#����#�.��*�#�#��#��������"+��

See Also

� ����������� ������������������������������������ ����������� �

� ".//89)2����������������"��#���"�������!� ���+�������#���� �

Processing Options for Cost Components Report

Defaults

1. Enter “1” to print Simulated costs, “2” to print Frozen Costs. If left blank, simulated costs will print.

Simulated/Frozen Cost Selection ____________

Reviewing Costing Information

3–55OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing the Cost Component/Ledger Integrity Report

1���#���6����#���#"���)���#������B> �� C����������#�-�#��"#��

9��#�����#�-�#��"#�����#�#���������#�������+�#���+�@���#��������#��������#����#�����#����#���������#�+�������#�����"#���#�"��#�����#<�����#�. ��B18$�2C�����#����"���#�����"������1����#� ��� � �"#����#�����������#�����"#���#�+��#����"���� ���#"����+�#���"#���"��#�����#<�����#�. ���

@�����-+����������#�� ���#"���������#����#�"����#���"#�������#������������#������� ����#�"�+���#"����.��#������������H���#�

See Also

� "./37.2������&����� �6�"��#���"�������!� ���+�������#���� �

Processing Options for Cost Component/Ledger Integrity

Report Option

Enter a ’1’ to see report detail for all items processed. If left blank, only items with cost discrepancies will be printed.

Selection value ____________

Product Costing and Manufacturing Accounting

3–56 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

3–57OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Additional Costing Features

A�������������� ����"#"��� �+��#���#����*��"#����#"���"�+���#"����A�������������#�+�����"#���+���������#���#����#�����#����A���������#����"�� �#�����#�#��#��"�+�@����� ����A�����������#��#�����#�"������� ������"#��#�����#�����#���#��� ����A�����������#����#�+�����"#��� �.� ����"�����������#����������#������������

��*"����"#�����"#"��� ���#"���+��#������"#��+�#���+� ��"���#�*5

� ����"�����#

� ����"���+�@�����#�#��"�� �#�����#

� 9���#"���� �������"���������#

� 9���#"��������#���#

� �����"���"#�����#� ���

Copying Costs

1���#���6����#���#"���)���#������B> �� C���������������#�=� ���

9���������#�#�������#���"�� �#�����+�@�����#�������*����#���#�+���������#���#����#�����#�����#���#�����A�������� ���������*����#��#��.�#�������#���#�����"#�"��#���������*����#���

:�������#�������"�����#"����� ����#������������"��"�+���#"���+���#����#���������#�#�. ��B1 ���&C�����#�����*����#��)�#��#�. ��B1 ����C�#�����#����#�������*����#���#��+��#�����#���#����#��#��������"+���A�������� ���� ����"�� �#�����#����#�+�@�����#��"��#������6����.������)���#��1�@���9���#��������#������#��+�@�����#�

(����5��������������#�. ���� #����������������������#��#�������+� ��� �����"�����#������#���������#�#�������#����"�����#���#�����"#��������������"�����������"�����#"����##"���.�+����������� �#��#����������"�������������#������#�������#��+�#�������#�����#�

Product Costing and Manufacturing Accounting

3–58 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Copy Cost Values

Process

COPY FROM INFORMATION:1. Enter a ’1’ to copy simulated costs or a ’2’ to copy frozen costs.

Simulated or Frozen ____________

2. Enter the Branch/Plant and Cost Method to copy.

Branch/Plant to copy: ____________ Cost Method to copy: ____________

COPY TO INFORMATION:3. Enter the Branch/Plant and Cost Method to update.

Branch/Plant to update ____________ Cost Method to update: ____________

Copying Frozen Costs to Simulated Costs

1���#���6����#���#"���)���#������B> �� C��������)��#��"�� �#�����#�

1��#�����#���#��������.������#��#���������������)��#��"�� �#�����#�#���#�"�� �#�����#�#��#��"�+�@����� ����)��##"�����#�� �������#��.��"���"�� �#"������"���

Processing Options for Cost Simulation Refresh

Process

1. Enter the Branch for Cost Reset processing (’*’ for all branches).

Branch ____________

2. Enter a ’1’ to reset rates in the Work Center Rates Table for the selected Cost Centers and Cost Methods.

Reset Rates ____________

Working with Additional Costing Features

3–59OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Updating Sales Order Price and Cost

1���#��������+�����6���"��������B>8�$ C��������9���#���� ��6"��0��#�

9��#���9���#���� ��6"��0��#�������#������#��#�����"#������3#��������#"������� �������"#��#�����#�����#���#��� ������"+"���"��#�����#<�����#�. ��B18$�2C��-+��� #"�����������"���"���#"���"��#����#����#������������#��#���1��"���9�"#������3#��������#�+"� ������ ��9����#�� ��#"���#����"���#��#������"+"��"�+���#"���#��.����������

(����5�������������#�"��������#����#�������#������ "���� �������#�" �"�+���#"��������+�������������������������3#�������#"���"��##"��������#��� ��#"���

See Also

� ���� ���)� �����������������"��#����������������������!� ���+�"�+���#"����.��#�����#"����"���+�������"+"����#����"�#����+��� � ��

Processing Options for Update Sales Order Price/Cost

Cost Options

Enter a ’1’ to update sales order ____________ with most current unit cost. (Any other value will leave cost unchanged. ) Enter a ’1’ to update the currency ____________ exchange rate (only domestic amounts will be recalculated). Enter a blank to leave unchanged. Enter ’1’ to update the ____________ inter-company currency exchange rate. Foreign amounts will not be re-calculated. If left blank, will not update the inter-company exchange rate.

Price Options

Enter a ’1’ to update the unit ____________ price of the sales order. Any other entry will leave unit price unchanged.

’ ’ – Transaction Date; ’1’ - Requested Ship Date; ’2’ – Promised Ship Date; ’3’ – Original Promise Date; ’4’ – Actual Ship Date; ’5’ – System Date; ’6’ – Invoice Date

Specify the date on which to base ____________ all price recalculations. Enter ’1’ to recalculate the ____________ Transfer Price for inter-branch

Product Costing and Manufacturing Accounting

3–60 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

sales. The pricing method specified when the order was entered will be used.

Adv. Pricing O

Enter the Line Type of the new ____________ Sales Detail Line item. This line item will contain the difference between the old sales price and the newly recalculated price. If left blank, will update the new price directly to the item. This must be a non-inventory Line Type. If you have specified in the last ____________ processing option to create a sales detail record to record the price difference, enter the Override Next Status of the detail line. If left blank, will use the original detail line’s Next Status. Enter ’1’ to base recalculation on ____________ the original order quantity. If left blank, the system will recalculate based on the current quantities of the Order.

Versions

Sales Order Entry (P4210) ____________

Updating Product Costs

9��#�����������#�7�"�#�������������#������#����#�+����������"#���"�#���.����0� ��#�� ���#"�������� �#�#��#������������A�������"����������������#�.���������#����������#��������#���������������"+�����������#��������#��A���� �����"+��#�����#���#����+����"����������#�#�����#����#��

��"�����������#����#�+����������"#���"��#�����#�<�����#�. ���)��#���1�@���9���#��������#������#����#�"��#�����#���������#�#�. ��+�����������������+��#����"#���

@���5�����"�+���#"���#��#������������*��"#��<���#"�����#�����������#����#� ��� �+��#���"#����1���3��� ���"+����"#����������#� ��� ��+����#����#���"� �����#�+��� �.����0� ��#��-+����"#����������#� ��� ��+� ��#����#���"� �����#�+��� � ���#"����#�#���.����0� ��#�#��#��������"+��

See Also

� ���� ������&��������'�(����+��"�#��#"����.��#�����#���#�#�����#� ���

� ���� ���&���������"��#���&�(�����6���������!� ���+�����"#"��� #��"���.��#�����#"�����#

Working with Additional Costing Features

3–61OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

&� ������ ������� �����

1���#���-����#���6"���,���#�9���#�������B>8$� C����������������#7�"�#�������

$� �����*��"#��<���#"�����#������ �#��#���+� ��"���+"� ������� "�*1"��5

� -#���4��.�

� ��#�7�#���

�� ��������.����0� ��#������ "�*��� ��#�

Product Costing and Manufacturing Accounting

3–62 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� �����#�)��""�������� �#��#���+� ��"���+"� �5

� (����#

� (����#�����

1��� / ������

(����# ������ �������#��������#����.����"����������#�#�

"�����������������"#���#�+��"#����A�������� �

"��"��#�����"++���#������#�#�����"�������#���"#���#�

������ ����������"+��"��#���(����#������+"� �

��#��"������#���������#����������#����������#����

4�#�5���#�������#��������� �����.���1���3��� ��

��#��$��#��"��������#�.��$�M��������������#����#�

������#"���"���.�+���#������.���1���3��� �����#��'$�

#�����������#�.��$�M�

��*���� � �� ����� ���������������������������� ����������������������������

�����#����������� ���#�+��� � ���#"���

(����#����� (������#��#�"��"��#�����#���#������.��"��#��

-�����0�������(����#�+"� ��"������#�� ������#����

�����#������ ����=� "���������5

( (����#

M 6����#���

L ��#����"���(����#

Working with Additional Costing Features

3–63OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Speed Cost Maintenance

Defaults

1. Enter the default cost method ____________ to display.

Process

1. Enter a ’1’ to prevent the ____________ standard cost from being changed

Changing Item Cost Levels

1���#���-����#���(��������,������"�� �����#"��������B>8$ $C�������-#�����#�<��� ������"���

(+#�������������#������#�"�+���#"���������"��#������#������������"#��H��#� ��� ��A�����#����#���-#�����#�<��� ������"���������#�����������"#��H���#� ��� ��+#����#�"�+���#"������.������#����

������������#�"��������"#��� �#��� ��3"#"�����#������+��#���"#���"��#����#�<�����#�. ��B18$�2C��������#��������#������#��#���������#��#�� ��� ��1��#���"#���#�����#��#���������#�������#����#������#�����#��#��������"���#"+"���+��� �0"����#������#�����#�)��""���+����

����������������#��������#�����#��� ��#"����+�"#�������������#����#�/���� ���#"���1���3��� ���"+���������������"#��H���#� ��� �+��.����0� ��#����� ���#"���#��.����0� ��#��� ��3"#"�����#������+��#��.����0� ��#����� ���#"�����#����#�"��#�������� �0"����#�����#���#���������#�

A����������-#�����#�<��� ������"���"�����+��������+"�� ������������������#���������"�����+�������#����#��������#��#���-#�����#�<��� �����"������#�����"������#��#����������#"����A������ ��� ������#���������"�����+������+"#���������#������"������"��

������������#���������"��+"�� �������#����#�������#��#���+� ��"��#�. �5

� -����#�����#�<��� �+"� ��"��#���-#���7�#��B18$�$C

� ��#�<�����B18$�2C

(����5���������������������"#�����#� ��� ��#�����������++��#���#�#�������#�#����#����A������ ���#"�#������#��#�"�������

Product Costing and Manufacturing Accounting

3–64 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Before You Begin

� :��*����������#��#�. ������ �#� ��.�+�������.��"��#�����#�������"��������-+�#����� #��+�#��������"���������#"+��#���������������#��.��*���#�. ��#���#�����#��#�. ��#��#��"��"�"�� �+���#�

� =�"+��#��#������������#���-#���7�#������#�<�����#�. �������#�"������"����"���"��+"�� ������

See Also

� ���� ������&��������'�(����"+����������#���#����#�����#� ��� �+��#���+"##"��

� "710132�&��������'�(������(��� ���"��#���"�������!� ���+�������#��� �

Processing Options for Item Cost Level Conversion

Process

1. Enter the Cost Level to update to.

Level – Inventory Cost ____________

2. If updating to cost level ’1’, enter the branch to default the costs from. If updating from a cost level ’3’, the costs will default from the primary location.

Branch/Plant ____________

3. Enter a ’1’ to run in final mode and update files. If blank, no file updates will occur.

Update Mode ____________

4. Enter a ’1’ to print only exceptions on the edit report. A blank will print all items.

Print Mode ____________

3–65OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Applying Extra Costs for Manufacturing Actual Costing

������������������"���#�������#�� ���#"���+��������� �"#���#�����"��#���#�#����� ���3#����#�#��#�����#��+�#�������#�"#���������� ��#����3#����#+����#�� ���#"��������+� �����#��+�#����#���#�*����������+�#���#���#��#�������+��#�����������#���#"���������#����� �� �#����#��3#��.��������#��� �#��#����"��#�����#���������#�#�. ��B1 ���&C�

Before You Begin

� ��#����#�����#� ��� �+������"#����������##"���9��-#�����#�<��� �

� ��#����#����#������+��#�������+�������3#����#���������� ������������"������ �����������

+����� � ��� ����� ��� #��������� +����� (����

$� ��#������#���������#�B9��� �0�(C�+��������3#����#�

������������� ����������� ����������+��"�+���#"����.��#�9��� �0�(�

�� ��#����#�����#���#����+�������"#������"#������B��"��#���(�����C���%�B(�#�� ���7���+��#�"���<�#C�

�������� ���������%�����������������&����

� ��#����#���"�� �#����#��+��������#���#����#��#��������#�#�����+�#����3#����#�

�������� ������� ������"���������������������

8� ���#��#���"�� �#���� ���

A�����#���#����#���#����������%�"��#�������"�����#"��������#����+�� #�#�.����#��#���������#���#����#��#������#����"��#�����

�������� ����� ������"������

Product Costing and Manufacturing Accounting

3–66 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2� 9���#��#���+�@����3#����#�

A�����#���#����#���#����������%�"��#�������"�����#"��������#����+�� #�#�.����#��#���������#���#����#��#������#����"��#�����

�������� ��� ������������

&� )��"���#���+�@�����#�#���� "��#��#��#�#��������#��������# ������#��##������#���#����"��#������#����������������������#���#���+�@����#�"��#���2�

����"�( �+ ��� ���������������������

3–67OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Working with Standard Costing in ERPx Environments

1�������+��#�"���������"������� ������#�����+�����#"������"�����#��+#�������������+��#�"���������"��+"���"#���+� �#����� ����"��#���#���� ��"���������+��"������*"��������"��"�����#"�"#"���������"��#��#����"��#����/�.���������+��#�"�����#������+#�������#������++"�"��#����#"����"������#"#"�����#��.�������.�#�������"�����#�����(�����."��#"����+�����#"�����#���������". ���������"������#���"���#�����#��������#��"3�

������"��#��#�����. ��#����������."��#"����+�����+��#�"�����#������#� �����"�������#��������#�+����#�"������+���#������"�����#�����������#����������"+"��#�#��"��+���#�. "�"��������� ��#"�����#"�+���#"����-�����."��#"������#�"����/�#���#����#"�#"����"��#�.����������#��#���#"���"�+���#"���+ ���+���#�����#�.�"���+���#��������#�#������#���� ������������ �#� ����#������������#�

(��������������+"���"#������#"���������������#���#����#"����#"�"#"���������� �����#����#�" �����+"�"#"����+�#�����#"���������������� ��.������"����"���#��#���#�#����"D�������#���������+��#�"����#����#��#�������������� #"��#����� �"�#���������#��� ���#"����D�"���#���"�#�"���������"#�������#���#"���"�+���#"���#�������#�#�����#"�����+��#�"��������

-+��������#���6����#���#"����#���"���������"� ����"�����#��������"��.�#�����*"#��������������+"�����"#������"���"#".�#"����#����#���� �� �#�������#���#��"++���# ��

@�����-+�����������B��"��#���(�����C����%�B(�#�� ��7���+��#�"���<�#C���#��#������������������+"�����"#��������#�����#�������#������#��#�"�#����#��"��������#���� ��

��*"����"#��#��������#"���"���)63����"�����#����"#��+�#���+� ��"��#��"�5

� 9���#���"���.�#��������#���#"��

� 9���#���"�����#"���+��*"#�"#��

� 9���#���"���#��������#"���+�����+"�����"#��

� ��*"����"#��#��������#"���"�����������+��#�"��

� )��"��"��������#���#"���+�������#�." ��+���#�"�

Product Costing and Manufacturing Accounting

3–68 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Batch Product Costing

1��." ��+���#�"� �������#"�������������������.�#���D���#"#��+�������##��#�������� ��.�" #�"�����"+"��.�#���"@�������������"�� ��+��������#� ����

����.#�"��������#�� �����������������.�#���D���#"#���#���������#"�����#D���#"#���#���." ��+���#�"� �.�#���"@�������#�����#"���.�#���"@����#���#�����+� ��5

� <�.����������������#����� �������� ��"+�#���������#"�����#D���#"#����#����#�����#"���.�#���"@�

� 7�#�"� ���#����� �������� ��"+�#���������#"�����#�D���#"#����#���#���." ��+���#�"� �.�#���"@�

����+� ��"���#�. ��" �#�#��#������"." "#"�5

+������ (���E�����

��� ����� �D� ����� ������D�

������

$����� $����� $����� ���� �#�

2���� $����� $����� 4���

$����� 2���� $����� <�.���������������� �

$����� $����� 2���� 7�#�"� ��� �

-+�#����"�� �#����#�)� ���������������#�+"�����." ��+���#�"� ������.�#��D���#"#����#����#���������#"�����#�D���#"#���"#����#���@���.�#���." �

@���5�7�#�D���#"#"���"� ����������*��"#����#���:" �������#����#��������#�����3���������������"#��+����������#����.�#���D���#"#����#���D���#"#"������3��������#���.�#���D���#"#��

See Also

� ����� ���� ����������� ��"��#���)������������������!� ���+�"�#��#"����.��#���#�"���." ��+���#�"�

Understanding Costing for Kit Items

������������*"#�"#����"#����#"����#����"�� �#����#�)� ���������� �� �#��#������������#��+�#�������#�����#���.�������#���+��#�����#"�������#�������+� ��5

� ��������#�����#�����#��������#��*"���#�����+�7�B����+��#���C�������#"�������.������+��#��������������

Working with Standard Costing in ERPx Environments

3–69OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ����+��#�����#"��������#�����+�#�����������#���������+"������#���." ��+���#�"� �

� �����"�� �#����#�)� ����������� #"� "��#���+��#�����#"�������#����.��#�����#��+�#�����#"���B+���#�����#�<�����#�. �C�#���#��"���#�����#"��H������+�#�������#�����#��H����������#�

� ����������#������������#��������#�+���������#"���#����#��"��#������������#�+��#�������#�����#���

����+� ��"�������"��" �#�#������3��� ���+������#���#"���+����*"#�"#���

4 Cylinder 6 Cylinder 8 Cylinder1,00030%

1,25040%

1,50030%

300 500 450 = 1,250average cost of engine

costX

=

ENGINE

Standard Costing for Configured Items

��#"���+�����+"�����"#���"��"++���#�+�����#"���+��������+"�����"#���.���������+"�����"#��������#��������#������." ��+���#�"� �����#"���:���������#���������+"���#"����3"#����#"��������#�.���#�. "����.�+��������#��#���� �������-���#�����������#��������#�������" �. ��+����+"�����"#���

����6������*�������������+�������#�� ��������"#��##��������#� "#�������#"���#������*�����+�������+"�����"#����(�����"�����#"��"�#��#�#���������#���� �� �#��#�����#��������#����#����"��#��6����#"�����#�#�. ��B1 $��C����#�#�����#���������#�#�. ��B1 ���&C�

1�������+"�����"#����#���($���#�"� ���#�"��� �� �#���+���#���#�#� ���#��+�"#�"��#���������#��:$��"��#� �.����#�"��� �� �#���+���#���"#��H���#"���

�����#������#������.�����#�. "�����#����#�������#��#�����"#���#�����3#��������#����#���� ������+��#���#��E ��� ����+"�����"#����� ��

@�����-+����������#���#�������B��"��#���(�����C�����#���#�����%�B(�#�� �7���+��#�"��C���������������+"�����"#��������#�����#�����������#��#"��#�"�#��"��������#���� ��

Product Costing and Manufacturing Accounting

3–70 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Example: Costing a Configured Item

����+� ��"����3��� ��" �#�#������#���+�@���#��������#������ �� �#��+�������+"�����"#���������3��� �������#��#�������������������#�� ���+�#���������+"�����"#�������#��#�+�@���#��������#��3"#�"��#�����#��������#�#�. ��+��"#�����#������R�

S

U

X

Z

Y

WV

T

A1 = 25.00B1 = 2.50

A1 = 35.50B1 = 4.50

A1 = 42.00B1 = 3.50

10* 15*

5* 3*

2*

* component’s total cost from sum of all cost componentsA1 material cost calculated from the total cost of the direct componentsB1 direct labor cost calculated from that item’s routing

1��#���� ���#�����������# ���#�����#���D������+��#���6������*������������#�.���#���+� ��5

� ����� ���������.��������+"#������"�"�������"�������

� ����� ������ "������.�������������������"�"��������"�������

���#���� �������#��� ���#� ��� ���������#������#����"���#� "������.������������������"+����������"����D������+��#��� "������.��"��#�����#��D�������#����6������*�����������#��� ���#� ��� ���������#�+"#�

��������#��#�#�����#�� �������� ���������#��������*��������#�� ���#� ��� �"#���+"#��-��#����3��� ���������#������#�����*�����+�"#���9�.�+���#�����*�����+��"#���K������#�����*�����+��"#���K�.�+��#�����*�����+��"#���R�

Working with Standard Costing in ERPx Environments

3–71OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� ��������� ��������(��( �+�"��#������������ �������!� ���+�"�+���#"����.��#����+"�����"#������� �����

Working with Standard Costing in Process Manufacturing

6��������+��#�"������#���������#�.���"3"��������#"����+��"�������+��"�������"�� ����#"������"�"���� ����#��E#��������������"�����"#��+����"3"�����. ���"���#����+� �����.����+" "��������*��"���#�����"�#�����+�����+��#�"�������� ��"�� ����"�#����"�#��#������������"���.�*"������+����#"����

6��������+��#�"���������"�����#������"�#���+�"#����"�� ��"��5

� <"D�"�

� 1".�

� 6����

� >��

6�������#"�� ��+���������.�������������"+"���3��� ���+�"���#"��#��#�+#���������������+��#�"���

(������"�� ����"����"��#�B�D�"�� ��#�#����#��������*����C�������������#"�������"����������#��#�+����������"�� ����#���+� ��"��5

���������� ������#��#�+����������#"���#��#�"�������#���"���#�#�

#�����3#�����#"����4����#�"����"�#����"#����

"�#����"�#��

��%������� ������#�"� ���������"��"���#� �#��B�������"��� C��+

#��������

(�%������� (������"#����������������� #��+�#���������9�� ��

#�����������E�����#��� #�+����������

Product Costing and Manufacturing Accounting

3–72 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���" �#�#"���"�����3��� ���+��������+����#�#����"�5

Ingredients

Potato Slices 10 Starch wash potatoes

20 Drain water

Routing

30 Add water, soak

40 Drain water

50 Deep fry

60 Add seasoning

70 Package

80 Add preservatives

Frying Oil

Seasoning

Nitrogen

Co–product andBy–product

Waste Water

Waste Water

Used Frying Oil

Potato Chips

By

By

By

Co

Process – Potato Chips

A�����+"����������"#����"#��"����"��#�� �#"���"��������� �#"���"��� ���#��"���"�#����"�#���.�E�����#����E�����#�������.#"#�#"����A���� ���+"���#���#���#��#�����D�"���#���������������+��#����"#����"#��������#"�����������#"�����#��"�����*����#������ �.��#������

������������#�����#�)� ����������������#��#�#�������"�����#"���#�"�� ����#�����#�+��#�����E�����.�E�����#�������#��"���#�����#�+��#�����E����.�E�����#�����������"��#���������#����#�����+���#���+� ��"���� �� �#"��5

�"�"���#�����#�+��#��������"�#��#�����E����.�E�����#������"���#�����#���+��#�����#������#����"��#���

�����#���#�������#���"�+���#"���+���#�����E0:�E6����#�6 ���"�����. ��#�� ���#��#�����#�+�����������������#����#��"���#���#��������#�+��#����E�����.�E�����#�

��*"����"#��#��������#"���"�����������+��#�"������"#��+�#��+� ��"���#�*5

� )��"��"��������#���#"���+�������

� )��"��"��������#���#"���+��"����"��#

� )��"��"��������#���#"���+����E0.�E�����#

Working with Standard Costing in ERPx Environments

3–73OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� )��"��"�������#�������

� ��##"������#�����E0:�E6����#�6 ���"�����. �

� )��"��"��������#���#"���+�������#�." ��+���#�"�

See Also

� )��������������� ���"��#����%��� �������������!� ��

Reviewing Product Costing for Processes

9��#�"�+���#����"���#���#�����#�+�������#���"��#��������

&� ����� ������� ����� ��� � �������

1���#�����" ��6�7�6���������B> �$�C����������#�0�������6����

$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

� :�#���;���#"#�

�� )��"���#���+� ��"���+"� �5

� )���<�.�

� )���7���"��

� ��#���<�.�

� ������)��""���+���#���1��������

Product Costing and Manufacturing Accounting

3–74 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

8� �����#��6����-�+���#"������"���#���+� ��"���+"� �5�

� �"���:�"

� ��#������

� �����

� 6 ������A"� �

1��� / ������

����A"� ��M �������� �#"���� ��������#��#��"� �������#�+����#���

�����#������#�"��� ���#����/�#�#�������#"���#��

���������#�+��#�����������#��#�#��#�����#"���#���

��"����. ��#���7)6��#���#�����#�������#"���#��

���������#�� �����"#��#����3"#"�����������#����

�����#�#��� �����������#��������

Reviewing Product Costing for Ingredients

-����"��#����#�����������#��+���������A����##�������"����"��#� "#�#��������B"��#�����������#��#������##��������#� "#�#������#"��C�����#��+�#����

-+����"����"��#�"�������������3#����#�.�" #�"�#��"#���#��#����#��� ���#��#����3#����#�#��#�����E����.�E�����#�"��#�����������#��#�#��"����"��#����� ���#�������#�"��#����3#����#����� ���#���"��#�������D������#��#�#���"����"��#�����������������#�#���+��#�����#��+�#����E.�E�����#�

Working with Standard Costing in ERPx Environments

3–75OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� "�( �+ ���)����������� ���������*:�6*)�������

&� ����� ������� ����� ��� �������

1���#�����" ��6�7�6���������B> �$�C����������#�0�������6����

$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������)��#"���)��""���+���#���1��������

� �����#��6����-�+���#"����������-����"��#�+���#���1��������

8� �����#��-����"��#����"���#���+� ��"���+"� �5

� 6���#�-#��

� ;���#"#�

� 97

� 1�=

� 1��#���#�M

� 6����#�����

� ����#"��������6����#

Product Costing and Manufacturing Accounting

3–76 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Product Costing for Co-/By-Products

��E�����#���������������� ��#���#���������� #��+����������#"��������������� ��#�����"�������#�B����"#��C�#��#����� ��#����#�����

(�.�E�����#�"�����#�"� ��+��� ���#��#�"���������"��"���#� �#���������"��� �+�#��������#"���������:�E�����#�����.������ ����� ���E"��������+��#���������

��E�����#�����.�E�����#������#����"���#���1��#�����#�6����#�+"� ���3#����#�+����E0.�E�����#������#����+��#�����#������#�

Example: Feature Cost Percent and Co-/By-Product Costing

-��#���+� ��"����3��� �5

� ���� �#"�����#�N���#�#�"�����#"���S���#��+����"�������#"���E���#��+#�����E0.�E�����#���������"��#������"�������#"���

� ����#�#� ��+�� ������#�����#��������#"��������#��3�����$��������#�

� ����#�#� ��+�� ������#�����#�#��� �#�����#"�����#��D�� �$��������#�

$������ (�%:��%

0������

F (��� &��

$������

(�������� (��� (�%:��%

0������

(���

$� :��$ $� $����� $����� $����

�� ���$ � $����� $������S�B$������'�$����C�N�$%���� 2!���

���� �� ����

� $����� $������S�B$%�����'�%2���C�N�$%2���

8� ��� &� $����� $������S�$%2����N��%2��� $!!���

���8 � ���2�

���2 $� �%�2�

Example: Extra Costs for Co-/By-Products

�3#����#������#����"�#����"#������#"�� ��#����+�#�������������+���+��#�����#������#���������#�����+���"#".�#"���#����3#����#��-�#�����#���#��5

$� ��#��"���#���#�#� ��+�#�����#E������:$�#�������8���#�+��� ��+�#����E0.�E�����#

�� �� �� �#��#��������#��+�#�"�#�#� �#��#��������E0.�E�����#������#

� 9��#�"������#����#��� ���#��#����3#����#

-��#���+� ��"���"�� �#���� ����+���#���������#�+����������#�����#��+�3#����#�K �B��#.�����1�"��#C�"�"�� �����+��#��������#��+�#�������5

Working with Standard Costing in ERPx Environments

3–77OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(��� &��� @�� +���� &����

($�7�#�"� 8����

:$��"��#�<�.� ����� �����

:����#���<�.� 8���� 8����

: �7���"���)�� ����� �����

�$�7���"���=�"�. � ����� �����

���7���"���1"3���������� ����� �����

� �<�.��=�"�. � &���� &����

�8�<�.��1"3���������� &���� &����

KQ�1�"��#���# 8����

�"�� �#����1�@����������#�<����������"�������

Product Costing and Manufacturing Accounting

3–78 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������#�����#�� ���#��"�� ����#���K ���#�#�����#����������#��"���#��������#�����������E0.�E�����#����#".�#��#��#���#�#� �:$#�������8���#��������"��#���+� ��"����"�5

(��� &��� �B 6 �B 4 ($ 6 ($4 &����

�6 $���� $���� 2��� 2��� �����

�4 $���� $���� $���� $���� 8����

�9 $���� 2��� 2��� �����

(6 $���� 2��� 2��� �����

(4 $���� 2��� 2��� �����

(9 $���� ����� $2��� $2��� &����

(7 $���� ����� $2��� $2��� &����

&����� &���� &���� &���� &���� �8����

F �� &���� �2M �2M �2M �2M $��M

:������� �+�����E0.�E�����#������#�������#�#� ���#�������"�� ���#����2�����#��+�#����3#����#�K �B1�"��#���#C�"��#���� �������������"�D�"�����#����#�+��#�"�"#����+#��#���� ����#���"�� �#�����#���������+� ��5

(��� &��� @�� +���� &����

($�7�#�"� $����

:$��"��#�<�.� 2��� 2���

:����#���<�.� $���� $����

: �7���"���)�� 2��� 2���

�$�7���"���=�"�. � 2��� 2���

���7���"���1"3���������� 2��� 2���

� �<�.��=�"�. � $2��� $2���

�8�<�.��1"3���������� $2��� $2���

KQ�1�"��#���# $���� $����

�"�� �#�����#�N���T�1�@���������#�<����������N�!����

)��"��"��������#���#"���+����E0.�E�����#����"#��+�#���+� ��"��5

� )��"��"���"���#�#����E0.�E�����#���#"��

� )��"��"�����E0.�E�����#���#

&� ����� ���� �� ��%:��%������� �����

1���#�����" ��6�7�6���������B> �$�C����������#�0�������6����

Working with Standard Costing in ERPx Environments

3–79OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��)��#"�������#"�������� �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������)��#"���)��""���+���#���1��������

� �����#��6����-�+���#"������������0:��)��""���+���#���1�������

8� �����0:��6����#�)��""������"���#���+� ��"���+"� �5�

� ��#��#�;���#"#�

� 97

� 1��#���#M

� )������M

1��� / ������

��#��#�;���#"#� ����D���#"#���+�+"�"������"#�#��#������3���#�#�"�." ��+

��#�"� �����#"���#������������"�+"� ��� �������#�

���"+�����"���D���#"#"���+���������#�.�������#��

�����#��+�+"�"������������������1���3��� ���$

�������+�� ���#�"��D�"��������"#����#��$�����"#��+

+"�"���������#��G�������"+�������"#��+�+"�"���������#

"�������������������+�� ���#�����D�"������+"�"���

��"#��-��#�"��3��� ���������� ���#����.�#���D���#"#"�

+��$�������������"#��+�+"�"���������#����"+�"���#��

����������#��+�� ���#������"#�

Product Costing and Manufacturing Accounting

3–80 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

97 (������+"���������B��097C�#��#�"��"��#��#���D���#"#��"�

��"���#���3������"����#���"#����+���3��� �����

B���C���:K�B.�3C�

1��#���#M (������#����#��#�#����"�� �#����#�)� �����������

#���� �� �#��#�����#��+���+��#�������#"���"#������

�����#�����+�#���#�#� ���#��+�#�������#�

��#��#��������#����������� �����.���+���3��� ��

��#��2M���2���

��*���� � �� ����� ���������������������������� ����������������������������

��"��� ���"�����"����#�)� ���#���� �� �#�����#

�����#�����+�#�����#�����#������"�� ��"���#�������#"���

#��#�#�����E�����#�����.�E�����#��������#��+��"

����#"�����#��#�����E�����#�����.�E�����#��#�#��#

#���

����#�#� ��+�� ������#�����#��������#"��������#��3����

$��M��( ������#�����#�#��� �#�����#"�����#�#�#�

$��M�

)������M (����.��#��#�"��"��#�����#������#��+�#���"����"��#

��� ��.��"��������#� ��#����E�����#����

.�E�����#�

��*���� � �� ����� ���������������������������� ����������������������������

��"�"�����#��"���"����"��#�����#� ��#����E�����#

����.�E�����#��#���*��������� �#"�����#���#�����

#�#� �"���+�������"����"��#�

1����E�����#�����.�E�����#��#�#���+"�� �����#"���

#��"������������#���#�#�#� �$��M�#��"����

"����"��#�

&� ����� ��%:��%������� �����

1���#�����" ��6����#���#"��������B> �$8C����������#�0���������#��������#�

Working with Standard Costing in ERPx Environments

3–81OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���������#������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� 1���#���1�����������������0:��6����#�

� �����0:��6����#��� ��#"��������������E0.�E�����#������ "�*��� ��#������#����#���#����*��"#����#���������#������"� ���#�����#+��#�����E0.�E�����#��

Product Costing and Manufacturing Accounting

3–82 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing a Costed Process

9��#�����#���)��#"��06����������#����"���#�������"@�����#��+���"#���+�����������#"���"��#�����������"�"�+���#"��������� �������++��#"�� �������������#"�����#��1���3��� ����������5�

� ="���#�����*����#������". ��+���������#"���

� ��#��"���"+�����*����#����+����� #"� ������#"���

� �"� ���"�� �#�����+�@�����#�+�� �.�������"������������������ ��.����#���#����

� �� �� �#��#���#�#� �+��� ���#�.����#���#���"��

� ="���#�����#��+�#���"����"��#�

� ="���#�����#��+�#�����E�����.�E�����#�

� ="���#�����#�+���"++���#�D���#"#"��������"#��+����������"�+��#��� �������#��"�� �#���"++���#�����"�������"���#�����#"����++��#�

��"��������� �� �#��#�����#����"�#����"#���������#���������#�"��#������������#����"�� �#����#�)� ���������

&� ����� � ������ �������

1���#�����" ��6����#���#"��������B> �$8C����������#���)��#"��06���-�D�"��

Working with Standard Costing in ERPx Environments

3–83OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����#���)��#"��06��������� �#��#���+� ��"���+"� ������ "�*�1"��5

� :����06 ��#

� -#���4��.�

�� )��"���#���+� ��"���+"� �5

� ;���#"#��'�)�D��#���;���#"#�

� (��+���#�

� ��#�7�#���

� )��#"���:�#���;#�

� :�7�:�#���;#�

� �3#�

� ��*����#�

� ������DQ

� <�.�

<�.����#������ E#"�������������� �� �#��������#"�����������#�"�+���

� 7���"��

� �������

� ��������#

� ��#�

� ���#��� ��.�#�����+�@�������"�� �#�����#��������1�@�����"�� �#���+���#���="��������

8� �����"���#���"#��H�����#"���.��*�#��+���#���1�����������������#"���:��*�#��"������

Product Costing and Manufacturing Accounting

3–84 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2� �����*��"#����#���)��#"��06�������������#���:" �+���#���1�������

������*��"#����#���:" �+���������+�����"������������"��"����"��#���#�+����"�� ������#"�����+��� �"����"��#������ ����#"���"��#����������������#����+���#�����#���������#�#�. ������+ ��#�#��� �#�"�� �#���� ���������#�����#��"��#��"++��+��#���������*��"#����#���)��#"��06����-�D�"��"+�����������������#��������"����#��� �#�� ���

&� � "�*�� ���

Working with Standard Costing in ERPx Environments

3–85OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

!� �����*��"#����#���)��#"��06�������������#�����E0:�E6����#+���#���1��������

����1"��0:���+��������������"���������� ���E0.�E�����#����� �����#"����-+�����E0.�E�����#�"������+�������#�������������#�����#���������+��� ���������������#����+���#����#���������#�#�. �������+ ��#�#��� �#�"�� �#���� ���������#����#��"��#��"++��+���#���������*��"#����#���)��#"��06���-�D�"��"+������������������#��������"����#��� �#�� ���

�� A��������"�����E.�E�����#���#�+����"�� ������#"���.������"����#�����E0:�E6����#�+���#���)�������������#���)��#"��06����

%� � "�*�� ���

$�� �����*��"#����#���)��#"��06����#���"���� ���#����"�#����"#��������#"������������#�" �+���#���)��������

Product Costing and Manufacturing Accounting

3–86 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#���)��#"�����#�" �� �.����#�#��#������������ E#"����������#��������#����������������"���#����#�.��*�#�

Working with Standard Costing in ERPx Environments

3–87OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1��� / ������

������DQ (����.������#��"��"��#����������+�����"���

-����#"���"�#��#"���������.��#��#��D������#��

+�."��#"��������. ��#���"��#�������+��#����+���

"#����A�������#��*���#�����������#"���.������#"���

-��." ��+���#�"� �������.��#��#���"���#��#�����#"��

#���"��#���+�."��#"��������. �������#��#��D�"���

���"+"�����������#���#��A�����+"���#�������#"��

�D�������+#���������#��#�����#"���"�#��#"���+��#��

"#�������������1 ���7��������#��#������#�"

���.��"��#���.��*+ ��0��+ ���.������#"��������

-�����"���"��������������������.��#��#��D�����

#������. ��#���+��#������"���"����������

1�����#"#"�������+��#�"���������.��#��#�"���#"+"��#��

�D������"����"������"#���"������ ���#��.����������

�*"�����+"� ��� �������#����#���������#"����D�����

#��#��������#�#��.��"��#����"� ����+�"�+���#"���

A�������������"�� �#������#���.�#������3"#"���#���

1���3��� ������$��2�#��������#���.�#�����#���$�����

$ �

��*���� � �� ����� ���������������������������� ����������������������������

�����+�+��5�(�����"�����#"������#� ����#���I�*"�

#�J���I9��#�J�����#"����D�����������"�"���++��#�

-��I�*"��#�J�������#����#�����������#��������#"��

�D���������.����#���#�#"�����"�#�������"� ��"��

����#"���������"� ���#���#�#� �+���#��#���"�#�+����

���#���#�#� � "���

-��I9��#�J�������#����#�����������#��������#"��

�D���������.����#�����#�++�+���"� ��"�������#"���

����#�#� �+��� �����#"������#������"�� ��"���#��

����#"����D���������.����#�������������#���#�#�

"���

:�##����+�+��5�����������D�+"� �����#�"�������.��#��#

"��"��#��#��������+������#���"��#�������+��#�"��

����#"���

See Also

� #����� ��#�������� ���� �������"�����

� ��������� ����������� ����������+��"�+���#"����������#����+"����#�������#"���:��*�#�B9��� �0��C

� ����������� ������������������������������������ ����������� �

Product Costing and Manufacturing Accounting

3–88 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Costed Routing/Process Inquiry

Defaults

1. Enter the cost method (ie., 01, 02, 03) to be used for Sub-Contracted Items. (Blanks will default to a “01”)

Outside Operations Cost Method ____________

2. Enter the cost method (ie., 01, 02, 03) to be used for Purchased Items. (Blanks will default to the cost from the Mode, ie., Standard Cost.)

Purchased Cost Method ____________

Display

1. Enter a ’1’ to display the costs ’UP TO’ and including the operation sequence entered in the ’Skip to ’ form control. If left blank, the costs will be displayed beginning with the entered operation’s costs.

Skip to flag ____________

Process

1. Enter a ’1’ to include cost buckets 1 and 2 in the total. If left blank, the total will only include costs buckets 3-6.

Include 1 and 2 in total ____________

Setting Up the Co-/By-Products Planning Table

A������#�����E0:�E6����#�6 ���"�����. ��#����#��"��5�

� ���#������#�����+�#����������+����E�����#�"��#"+"���+���������*����

� ���#������#�����+�#�������+��#���+��#���"#���"��#"+"���+����#����������������������������*�����+��#�����E�����##���� ��

A����#����#���� ���"���#�. ��#��"���#"+��#��������#��#�#����#������#��� �� �#��#�����#��+���E0.�E�����#������ �����"���������#����#�����+���������� ���"����:����������E0.�E�����#�����.����������.�����#��������������������"�����������+#����������"���������������"������"��#�#��#�����#�+���������������#���� ���"���#�. ��

4��� ���� ��������+����E0.�E�����#�"��#"+"���+����������*�����G������������������"+���������#����+���#���"#������������+�����." ��+��#�"� �������#"���+�����"��#����E�����#�������������#�� ��#����$��

Working with Standard Costing in ERPx Environments

3–89OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�����#�"��#���#�. ���+���3��� ���2�������#�+��#���"#����������������"���"��#"+"���.���"��#����*�����+����E�����#��

A�������� �����������E�����#�#��#�"�����������#"� ��.������#�������������1���3��� ���#��������������������!2������#�#���2������#� �#"���"��.�#�����#�����:�#�����������������#�����E0:�E6����#6 ���"�����. ��+������������ ���#��#�����E�����#��-��#����"#��#"���������#��#����#�����E0.�E�����#�� ���"���#�. ���"#������#������#��D�� �#��$�����"������#��#�#���� ����� �� �#��#�����#��+���E�����.�E�����#�����# ��

���������E0.�E�����#�"����#���.������#�����������������#���� ���"��#�. ��#��� ���#��#�����#��+�#�����E0.�E�����#�������#����������A�������"�������"��#�#��#�����#�+�������������

1���3��� ��������"��#����������E�����#�#��#�"���������.��#��������������#���+� ��"��5

� �������� �����+��#�"����������"���"�����%�������#��+�#���#"���

� (�����������������+���������$�������#��+�#���#"����"#����##��#����������"����#����#������� �

A��������#����#���� ���"���#�. ���"#��#����#������������������#����#��#� ���#�����E�����#H�#��������#�#���+ ��#�#����3#����#�#��#����"�����$�M��+�#���#"���

&� ��� �� ��� ��%:��%�������� ���� �����

1���#���6����#���#"�����#��������B> �8�C����������0:��6����#�6 ���"����. ��

Product Costing and Manufacturing Accounting

3–90 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#����0:�E6����#�6 ���"�����. ������� �#��#���+� ��"��+"� ������� "�*�1"��5

� :����06 ��#

� ��0:�'6����#

�� ������������������ "�*��� ��#�

� �����0:�E6����#�6 ���"�����. ��)��""�������� �#��#���+� ��"��+"� ��+�����������5

� 6����0�-#��

Working with Standard Costing in ERPx Environments

3–91OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� 6 ���M

� ��#�M

� �++��#"���1��

� �++��#"���������#�

8� �����#���"�+���#"���"������#��+��� � "#����������� "�*��F�

See Also

� ��� � �����*�����6*)��������"��#���7���+��#�"��������"#".�#"��6 ���"���>�"���+�����"#"��� �"�+���#"����.��#��##"������#���� ���"��#�. �

1��� / ������

6����0�-#�� (����.��#��#�#����#����"���#�����"#����-#�����.��"�

��#�� �������#�"��"#������.��+���#�

1���������*������#���"#������.��"�#��������

��*���� � �� ����� ���������������������������� ����������������������������

-���#"+"��#�������#������"#���

6 ���M ���������#�����+��������+�������"+"���+��#���.���

�����/��#��������#"����1���3��� ��������������"��#

�������&2M��+�#��"� �."���#��"#���"����"��"#������

2M��"#�� ����"��"#���.���������#�����������

����7�#�"� �6 ���"����#������#�"������#����#�

�����#� ��� ���+��������H���E�����#����

.�E�����#����#�������#��������� �����.���+�

�3��� �����#��2M���2����������+�� #��� ���"��M�

��*���� � �� ����� ���������������������������� ����������������������������

���������#�����+���� ��+��������"+"�������

��#�M (������#����#��#�#����"�� �#����#�)� �����������

#���� �� �#��#�����#��+���+��#�������#"���"#������

�����#�����+�#���#�#� ���#��+�#�������#�

��#��#��������#����������� �����.���+���3��� ��

��#��2M���2���

��*���� � �� ����� ���������������������������� ����������������������������

9���#���� �� �#��#�����#��+�����E�����#�����.�E�����#

�����"#�����.����������+�������#���������������

+��������."��#"����+����������������*��������"

�� �����#��"������#������#�����+�#�����#��+�#��

��E�����#�����.�E�����#�"�� ���#���#��#���� ��#��

�����

Product Costing and Manufacturing Accounting

3–92 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Product Costing for Percent Bills of Material

-���"#�����������"��#������+��#�"������"�����#����������������#�." �+���#�"� �#���3���#���"����"��#����������#�����+�#�������#�D���#"#���

-+�������������#�." ��+���#�"� ��#����#����� �� �#����#�.�������#��D���#"#"�����"+"���"��#��������#�." ��;���#"#"������3�����"�������#���B+���3��� ��!2�+��!2MC�����#���#�#� ��+�#�����������#�D���#"#"����#��D�� $������������#���#����������"#��+�������#��#����������#�#��#�������#��"#��+��������"#���#����"�������"�������1��." ��+���#�"� ��"#���I. ��*J�.�#���D���#"#���#�����#�� ����� �� �#��#�����#�+��$��"������"#��+������+��#�������#������#�

See Also

� ��������� ���� ����������� ��"��#���)������������������!� ��

� ���� ��������������� �������������"��#���&�(�����6���������!� ��

+��"�+���#"����������#���#����#�����"#��+�������+�����������#������������#�

&� ����� ������� ����� ��� � ������ ��� �� �������

1���#�����" ��6�7��"��#�������B> �$$C����������#�0�������:" �

Working with Standard Costing in ERPx Environments

3–93OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��:" ��+�7�#�"� ������ �#��#���+� ��"���+"� ������� "�*1"��5

� :����06 ��#

� -#���4��.�

�� ������������������ "�*��� ��#�

� �����#��:" ��+�7�#�"� �-�+���#"������"���#���+� ��"���+"� �5

� ;���#"#�

� 1�=

1��� / ������

;���#"#� �������.���+���"#�#��#�#����#������ "��#��#��

#����#"���

��*���� � �� ����� ���������������������������� ����������������������������

(����.��#��#�"��"��#�������������������#�������

#������+��#���#�������#�"#����(�D���#"#���+�@���"��� "��

������+�� #��� ���"�$�

Product Costing and Manufacturing Accounting

3–94 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Daily

Product Costing and Manufacturing Accounting

3–96 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4–1OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Manufacturing Accounting

������"�������#"#"���"���������"���.�"������"�����#��������"����#"�#���#��� �����#��+�#��"�����#"������"�"�� ����"���#"+�"�������#"���#��#������ ���#"�����3���"#�������#����*�#����������������#"�����#������./��#"���"�#����������#������� ����#����#��������#�����"��������#"#"�����*�#�� ����

(+#��������������+"���"#�����#�����������������#�"���"�����"#��"��#������#��#��+��#������#������"�#��#���������#"�������������������+��#�"���������#"����#���"������"#����. ��#�����������#��#��*���#���"�#����"#���������#"�"#���"#�"��#�������+��#�"���������(���#�"� �"���"����"�#��"����#����"����#��������+��#�"�����������������#���"��#�����"#�"��#�������+��#�"������ ���#����������������#�" ���������#"�������#��#��+ ��#���."#��������"#�#������#��"����+"����"� �������#���������������.��#��+����#��#�������� � �����#��.� �����+"����"� �����#�������#�#�������+��#�"������ ��

�����." "#��#����+���#��������#"���B�����"���.�������+�@�����#C�����#�� ���#"���B�����"����+��3���#�����#�������#�� ���#C����. �������"��#�������#� ��������#�+��#�����#��+�����+��#�"���������"������"���#"+������#��#����"�#��+����"�"�� ���#��3���#�#"����:�##�E"�+�������������#����""�������#����.�������������������+���#"���"�� ����#���#��+ ��#�����#���#�"��#���� #"��#����#��+�#��������#��-����#�����#�����.���� ����#���+ ��#�#��������#�����#�

-���� �#" �����������"��"���#"���������� ��#��"�������#���#����� ��"�����#��#��������"��#����� ����������#�����������������#����+"���#"������������#"��������������#��.�����#��# �����"#�����������������#��.�"�#���#��������+ ��#���#�������#������#� "+����� ����D�"�* ������". ��-���#"�����"�������#"#"���"��#���� �.� ���*�#� ������ ��"+�#�����"�"�"@�#"���#����*�#�+�����������#�������������#�

����7���+��#�"���(�����#"����#�����*��"#��#���>���� �(�����#"���#���#���� �������������#�������� � �����+���#"���+����������"@�#"�����*"����"#��#���7���+��#�"���(�����#"����#������"#��+5

� 9���#���"�����*�����"��������#"��

� ���#"���/���� ���#"�

� )��"��"�������� � �����.�#���

� 6�#"���#��#�������� � ����

Product Costing and Manufacturing Accounting

4–2 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���#�������"��" �#�#��#���"�#���#"���.�#�����#���7���+��#�"��(�����#"����#�������#���>���� �(�����#"����#����

Accounts PayableSystem 04

General AccountingSystem 09

Accounts ReceivableSystem 03

Manufacturing AccountingSystem 31

DistributionSystems 41, 42,

and 43 AccountBalances(F0902)

Trial Balances

Financial Reporting:��Balance Sheet��Income Statement

Trial Balance by:���Business Unit���Object Account���Month

GeneralJournal

Account LedgerInquiry

Account Ledger(F0911)

Transaction Entry Reports/Output

Voucher Payments

Journal Entries

Shop FloorManagementTransactions

Sales Orders, Purchase Orders,Inventory Transactions

Invoice Cash Receipts

4–3OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Batch Control(F0011)

TransactionInput

� A/R� A/P� Payroll� Journal Entries

TransactionReporting

Posted and UnpostedAccount Transactions(F0911)

� Ledger Inquiry� Transaction Batch Review

General Ledgersand Journals

General LedgerPosting

Account Balances(F0902)

FinancialReporting

� Trial Balances� Balances by Period

Financial Reports

� Account Master (F0901)� Business Unit Master (F0006)� Company Names (F0010)� G/L General Constants (F0009)� Automatic Accounting Instructions (F4095)� Fiscal Date Patterns (F0008)� User Defined Codes (F0005)

ControlTables

System and AccountingStructure Defined

Product Costing and Manufacturing Accounting

4–4 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���#��E��#�����"��" �#�#��#���+ ����+�#���7���+��#�"��(�����#"����#����

Work OrderRouting(F3112)

Account Master(F0901)

Account Tables(F4090)

Build Chart of Accounts(G09411)

Build Manufacturing Accounting Tables(G3141)

Enter Work Order(G3111, G3113)

Process Work Orders(G3111, G3113)

Work Order Master(F4801)

Work Order Issuesor Backflush(G3111, G3112)(G3113, G3114)

Hours and QuantityEntry (G3112, G3114)

ProductionCost (F3102)

Parts List(F3111)

Work OrderTransactions

(F31122)Work Order Completions(G3112, G3114)

Work Order Update(G3112, G3114)

To Work Order Activity . . .

4–5OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

ProductionCost (F3102)

Parts List(F3111)

. . . Work Order Activity

Work Order Routing(F3112)

Accounting Tables(F4090)

Item CostComponents

(F30026)

Work OrderActivity

(P31802)Account Ledger(F0911)

Work OrderMaster(F4801)

PostingReport

ProductionCost (P31804)

VariancePostingReport

General LedgerPosting Report

Account Balances(F0902) Post General

Journal(G3116)

At Work Order Completion

From Work Order Update

Product Costing and Manufacturing Accounting

4–6 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Accounting Fundamentals

:�+��������#���������������H�7���+��#�"���(�����#"����#����������#�������.�"������#���"����+�#�������� � ����������+�������#"���������#�(+#����������#����#������� �"���+�����*�������������#���7���+��#�"��(�����#"����#���#�5�

� ���#��/���� ���#"��+����*��������#������� �

� ���#����"�����/���� ���#"�

The Accounting Equation

�����#��"������������H���#���#���������#���"���#����� #��#�#��������+#������"���+"�� ���"�������#����#�*��"�#�����"���#"����������#��#��������������"���#�������

A����� �� �#��#������������"#��#�"�.�"��������#"����D��#"��5

ASSETSWhat you own

LIABILITIESWhat you owe

EQUITYWhat you owe

the owners

����3#����#�"��D��#"��������� ��H��D�"#��"��D�� �#��#����������"����#".�#������"#� �� �����������"����3����������"�"�������������� �#��D��#"���"�" �#�#���.� ��5

Current LiabilitiesNotes Payable

Accounts PayableShort-Term Debt

ASSETSCurrent Assets

CashAccounts Receivable

Inventory

LIABILITIES SHAREHOLDERS’EQUITY

Long Term AssetsIntangibles

Notes Receivable

Long Term LiabilitiesLong-Term DebtOther Liabilities

Contrib Capital+ Revenues– Expense– Dividends= Shareholders’ Equity

4–7OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What Is the Chart of Accounts?

�������#��+�������#�"���������+�#����� "��������#�#��#������"���#��#��.�"�����"#��"#�"�������������H����#"���#��#��������������#����������#��+�������#��������+"���#��� ���#"����+�#���������#�.���"�����#���#"�������#"���"�#��#"���B((-C��((-�"��"��#����"������.������������#��#�� "�." "#"������������

�������#��+�������#�.��"���"#��#�����/������"����+�����#����#"���������#"�����"#����#�" ���#����#"������"�#"��5

+����� B:� ���������#C

5������ B:� ���������#C

$����A /<��� B:� ���������#C

������� B-�������#�#����#C

/ ����� B-�������#�#����#C

�������#��+�������#��"� ���#���+� ��"���� ����#5

� ����������#����.���������"�#"��

� ������#"�����"#�����

� ���� ��� ��+���#�" ��"�����#��#���������#�B<��C

� ��"���������#�����"�����#����"���.�"�����"#

Product Costing and Manufacturing Accounting

4–8 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��������"��+� ��"���" �#�#������3���#��+�#���.� ��������#����#��+������#�+�������������5

Acct DescriptionPostEdit LOD

B/SBU200

100010011100111011301200121012151400180018101890

AssetsCurrent Assets Cash Cash in Bank Short–Term InvestmentsAccounts Receivable Trade Accounts Receivable Allow for Doubtful AccountsInventoryPrepaid Expenses Prepaid insurance Other Prepaid Expenses

2000200120202060210021202160

21703900

Fixed AssetsProperty and Equipment Buildings Furniture & Office EquipmentAccumulated Depreciation Accum Depr – Buildings Accum Depr – Furniture & Equipment Accum Depr – ComputerOther Assets

NNNN

NM

NN

345665665566

XXXXXXXXXXX

NN

N

N

4566566

65

XXXXXXX

XX

See Also

� "�( �+ ����������� ���##&��+�����"#"��� �"�+���#"����.��#�#������#�+�������#

Accounts and Account Numbers

����������#������#��#������"�������#����+��#����#���#������#����#"���#��#�������� � ����������������#���������#����������#5�

� ("���.�"�����"#0�./��#0�."�"�������

� ��#��"������������#������#��

� ("��� ��� ��+���#�" ���"���#����#������#��� ����.� �����"�#���#��#�����"�������+�������#

(��������#����.��"�� ����.�#��#���.�"�����"#������./��#������."�"��������A����#����#���>���� �(�����#����#��#�#�������"�������������#��������+"������.� �#������#��#�����������#��+�#���������#����.��

4–9OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#��#���#��#����+����������#����.�5

Where What

BBBBBBBBBBBB OOOOOO SSSSSSSS

Business Unit ObjectMAJOR

SubsidiaryMINOR

Required Optional

����+� ��"��� "#���+"���#���#��#����+����������#����.�5

������ '�� :�"�����"#�������"���#��#���#��+�#���.�"��������#

#��#����:�"�����"#�"���#"+������������ � ����

��#"�"#����������������#��� ���#�����"@�#"��� � ���

�"#�"������.�"�������#��� ��� ��#���"�������������#

+��� ����������3��������#�� "�." "#"��������D�"#��

(���������������������� �������������3����

.�"�����"#������5

� ����#���#�(� ����#���#�:� 7���"������

$�C��� �� ��������

+������

7�#�.�"�����"#�#��#�������+"������"#��+��./��#

������#����#"��� ����./��#�������#������ ��������

�."�"���������#����"���+�#�����+"���#���#����#"��

��#"�"#��������./��#������."�"���������#���+"���#��

*"����+�#����#"����"#����"������������*"���B+�

�3��� �����#���������� "�����������C�������"#��

��*������������#��+�������#�

$�C��� % G#�C�� +�����H

�����./��#������/��������#�����".��#���#�����+

#����#"����"#����"������������*"���������#��

�D�"���./��#�+�������#����#"�����#��������5

� )��#��3����� ���"���� �� 1"�"���������"����#��

A�������������#��"3�� �������"�������#��"��#�"

+"� ��������*����#����#�������++"�"��#��������� �

���"����"����� �����.��"��#����./��#�������#�

Product Costing and Manufacturing Accounting

4–10 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

�������� % G#�� +�����H

��."�"���������#�����.�"�""����+��./��#�������#�

9�����."�"���������#���������������������#�" ��

������#"�����#"�"#��+������./��#�������#��A������������

#���"��#�� �������"�������#��"��#�"�+"� ���1���3��� ��

����������#���"@��#���I����"��:��*J��./��#�B������#

$$$�C�"�#��#���+� ��"����."�"���������#5

$$$��:�()�+��:������*�4�#"��� �:��*

$$$��1-:�+��1"#�-�#�#�#��:��*

$$$��1)(4���+��1"#�:��*��+�1����

5���� �� .���� A����"����� ��� ��+���#�" �B<��C�#�������������#�#�

���#� ���"���������#�����.#�#� �����"���#���� ��

�����������#���� ���"� ���#��� ��� ��+���#�" ��� "��

����"���"�#������#�

9��<��� �#������%�+��������#��<���$�"�������+�

������"������<�����+��.�"�����"#�������#��

���� "���<��� ����.� ��������#����#�����<���

����8����"������#�#����#����#�

����+� ��"�������"��" �#�#��#���<����"������

Reserved for Company

Reserved for Business Unit

Title Accounts

Reserved forJob Cost

LOD 1

LOD 2

LOD 3

LOD 4

LOD 5

LOD 6

LOD 7

LOD 8

LOD 9

4–11OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

(�� ��#���+� ��"�����"�� "�������������"��� ��� ��+���#�" �#��������#5

� ("���<����D���#"� �����������#�*"���� ��� ��+���#�" ��4���D���#"� ��� ��+���#�" ������� ������"��+"����"� ����#�#��#�����#��� ��� �����"����#����

� ("���<��� �#��.� ��������#�#"# ��������#�+����#�� "�." "#"�������D�"#��

� ("����"#���<��� ���<���8�#����/��#"# ��������#����#���"�����#�#����#������5

� )������

� �"��#���#

� >���� ��������"�"#�#"����3����

� �#���"�����������3����

What Is Subledger Accounting?

-�����"#"���#��#������ ��.�"�����"#0�./��#0�."�"�����#�����+�������#���"����������������. �����������#"������. ��������I�.�"�""��J��+������#���#�" �+����#���"��#��#����������#����#�"��#����������#����#��+������#�

�����. ����������. �����#����+��������� � �����������#���*�#���#���#����"�����#�" ���������#"���"��#���(�����#�7�#��#�. ��B1�%�$C�������. �������.��� ���������"#�#�" �+��#�����#����. �����#����#"���

A�����������. �����#����#��������������#�#����#"�����#���#�������� � �����������#����. �����#����� �������#���"���������#�#�#� �"�������#�" ��A�������� �����#�����. ���������������#��1���3��� �������������#�� �������#"�����#"�"#��.����#�-����.����*��������.��

��. ������"++��+����."�"���������#�"��#���+� ��"������5

� ��. ����������#����#�����"#"��� ������"��#���(�����#�7�#��#�. �B1�%�$C�

� A�����#��������#�#����#"���#��#�������������#��"����"++���#�����"��#�����. �����������. ����������+"� ����#���#����#���"++���#������#�

� ��. ������������#�����"#"��� ������"��#���(�����#�:� �����#�. �B1�%��C��A������#� �#�"�.���"���#�����#"�����"#���������#���(�����#7�#��#�. ��

Product Costing and Manufacturing Accounting

4–12 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Subledger Types

���������"��#�����+"�����. �����#����������������"#����� "��#��#���. ��������.�����"�#�����#��#�. ��

(��� ��������� ����� (�E�(����.��*����.�����"����.��"���"#������"�#

#���(����:��*�7�#��#�. ��B1�$�$C��-#�"�#�����#

������ �������. �����#��������"�����+��#�����#�"

��#�����+�"�#����������## ����#�

��E�:�"�����"#����.�����"����.��"���"#������"�#

#���:�"���9�"#�7�#��#�. ��B1���&C�

$���� ��������� ����� ��E�(�#�"#������.�����"����.��"���"#������"�#�#��

�D�"����#�7�#��#�. ��B1$��$C�

<�E�<����"#������.�����"����.��"���"#������"�#�#��

<����7�#��#�. ��B1$2�$C�

-�E�-#������.��B��#C����"����.��"���"#������"�#�#��

-#���7�#��#�. ��B18$�$C�

��E��� ���������.�����"����.��"���"#������"�#�#��

�� ������7�#��#�. ��B18�$$C�

��E��#��#����. ��������"�"#���"���"#������"�#�#��

���#��+�(�����#�1���#�#�. ��B1�%�%C�

��E���*��������.�����"����.��"���"#������"�#�#��

��*�����7�#��#�. ��B18��$C�

-�����"#"��������������+"���#�����. �����#����BK��A������RC��"#�������+"��������B��0��C�������#���������#���"#������"�#�����#�. ���A����#����#���#����"+��������#�#����#���#����"#��� ������"�#���+���#��D�"����#��#��#���������"+"���� ���

Posting Edit Codes

9����#"�����"#������B6��C�#����"���#����"���������#�����. ������������#����#�����#�������#��������������+"�������#����#�������#��#������� �������#"���#�. ������#���#�����+�"�+���#"��������"������������������"�#������#�

4–13OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

��#�#���6������#���(�����#�7�#��#�. ��+��� �������#�#��#�����. ����������#"����1���. �����������#"������������+�#���+� ��"���6��5

� �������E������#�����#��. �����"��������+���#��������

#����#"���#��#��+������#���������#��A�������� ���. �������#�" �"�

#���(�����#�<�����#�. ��

��"�������D�"���. �������#��

5 <����E������#�����#��. �����"����#�" ���+���#�������#���#��

#����. �����"����#�" �"��.�#��#���(�����#�<���������(�����#�:� ����

#�. ��

��"�������D�"���. �������#��

I �����#���������#�� ����. �������#��+��#���������#�

���� �����#���� ���� ���#"���������#�����#�#����. �����"����#�" ��

+���#��(�. ��*������������#��D�"���. �������#��

T-Accounts

7�#�������#"����#������.����������. ����#"��B�D�� ���."#��������"#���#����#"��C���E������#���������� ������#��������."#��������"#���#"��

-��#�������� � ������I��."#J�����I���"#J��+���� ��#��#�����"#"����+�#���� �������#���������#��1���3��� ���������������"������#�������#������#�������."#��������"������#���� "�." "#��������#��������"#�������� ��������������"������#�����������������#��������"#��������"������#�����3�����������#�������."#�

Product Costing and Manufacturing Accounting

4–14 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

EQUITY

Debit Credit

Out

Less

Decrease

ASSETS = LIABILITIES + EQUITY

ASSETS

Debit Credit

In

More

Increase

LIABILITIES

Out

Less

Decrease

Debit Credit

Out

Less

Decrease

In

More

Increase

COST OF SALES EXPENSESINCOME

DebitDecreases

owner’s

worth

DebitDecreases

owner’s

worth

CreditIncreases

owner’s

worth

SUBSETS OF EQUITY

In

More

Increase

General Ledger Transactions

����+� ��"����3��� ����������#����#"�������������"��#�������� ������

INVENTORY WORK IN PROCESS (WIP)Debit Credit

5002000Debit Credit

500Inventory issuedfor work order

100600

(=550+50)

550 Finished goods50 Scrap

FINISHED GOODSDebit Credit550

VARIANCEDebit Credit

50

PAYROLL ACCRUALDebit Credit

Labor hours forwork order

After work is complete, inventory transfers out of WIP to Finished Goods.

The difference between the total inventory and the finished goods is thescrap, which transfers to the variance account, or to another account basedon AAIs.

(Beginning

Balance)

100

4–15OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What Are Manufacturing Variances?

=�"���������������#�����#�� ���#��"++��+���#�������+"�������3���#����#���������"���������.������#���"++������"�� �.���������������������#��#���." ��+���#�"� �����#"���

Frozen Current Planned Actual

EngineeringVariance

PlannedVariance

ActualVariance

Frozen Materials,Routing, and

Overhead versus

Current Bills,Routing, and

Overhead versus

Material Usage,Labor Efficiency,Work Order PartsList, and Routing

versus ActualTransactions

Current Materials,Routing, and

Overhead

Work Order PartsList and Routing

Instructions

����+� ��"���#�. �����".���������"�����#���5

/����� �����"++������.�#�����#���+�@���#��������#

B��#�"� �� �.��������������C�����#�������#���#�#��#

�����"����+���#���." ��+���#�"� ����#"�������

���������#��

0���� �����"++������.�#�����#�������#���#�#��#������"���

+���#���." ��+���#�"� ����#"�����������������#���#

#���#"���#�����#� "#�������#"��������##����������#��

��#�#��#����.�������#�����*��������#������� �

��#� "#�������#"���"�#��#"����6 ��������"��������

����������������"������*��������#������� ��

Product Costing and Manufacturing Accounting

4–16 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

+����� �����"++������.�#�����#�����#��� �����"����+���#��

��*��������#������� ����#� "#�������#"��������#��

��#�"� ����� �.��#��#�������#�� �����#������"�#�#��#

��*��������#������� ���(�#�� ���"�������������

��������5

� -�����#�"� � )�������������D���#"#"�� )��������� �#"��

5���� /������

�����"++������.�#�����#���� ������������#�� � �.�

��#��.�������#�����*��������#������� ����#"���

#������ '����

�����"++������.�#�����#���� ������������#�� ���#�"�

��#��.�������#�����*��������#������� ����#� "#�

$���� �����"++������.�#�����#���+�@���#��������#�����#��

���� �#���B� �����C���#����"���"����������#�#��

���E���� �#"���������E���� �#"�����#��+�#�����*

�������#������� ����#�����"���������� ��.��#��

�� #��+�����#�� ���#��#���������"��#����"�� ���+��

��*���������#"���

4–17OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Transaction Flow for Manufacturing Accounting

����+� ��"�����#"3�"���#"+"����"�����#�.���#�. ���������#���.��#������+��#�"����������9� �����"+"�������#� ���#�������#����� "��#��.�#�#������������#�� ���#"���

���� $����#�����,17?26- ��&�� ,17?26&-

0���� 5��,19666- ��&�� ,19666&-

����������,196644-

���� $���������,19664- ��&�� ,19664&-

0�������(��� ,19624-

���� 5�����,17666-

+�����5�����,12366-

���� $����=������,�96762-

9���#����*����#�#�����D���#"#��������9���#����#��#����"��#��#���+" ��

9���#��D�"��D���#"#�T9���#������� �#����#�"��#���#��+" ��

9���#��D�"������T9���#���#"������#"���"�#���#���+" ��

1��#�������#"�������#�#��������"#���������#�����#���"#���������#�1����#�� ��#"�������#�����#���"#���������#�

�������������,096669-

9���#�D���#"#�"����9���#���������#����"#���������#�"��#��#���+" ��

���#��-7#����#"��B���.�#�����.�C�

(�����������,09666;-

9���#���������#����"#���������#�"��#��#���+" ��

/�������&�� /���,0966446- �� 0������ &��/���,0286646-

9���#�������#���

����� ��E������'�����,�96744-

(�#"��#�#��������+ ���

9���#���������#����"#���������#�

�����E�������� ������,09629-

9���#����"#���������#+����#"������#"���"�#���#���+" ��

�������(�������,096667-

9���#����*����#�#������������#����"#���������#�+����� �#"����������

1����#�� ��#"�������#��#����������#����"#���������#�+����� �#"���

���#��-�����-�#����#"��B���.�#�����.�C�

Product Costing and Manufacturing Accounting

4–18 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

���� $����#�����,17?26- ��&�� ,17?26&-

0���� 5��,19666- ��&�� ,19666&-

����������,196644-

���� $���������,19664- ��&�� ,19664&-

0�������(��� ,19624-

���� 5�����,17666-

+�����5�����,12366-

#��������%� *�����/����,�96?24-J

9���#����*����#�#�������#��������#����"#�#��@���

)��#��������#����"#�#��@���

)��#��������#����"#�#��@���

9���#����"#���������#+��� ��������#�� ����� �#"�����������1����#�� ��#"������#��������#����"#���������#�+����� �#"����������#�@���

9���#�.�#�����.�����>0<���#��+�-7�����-�#����#"���

���#��-7�-G��-�������-�#����#"���

)�����*�����/����,�96?27-

9���#����*����#�#�����#�������#"���"�����"����+ ���

)������"����T��#"��� �����#�#����������#������ ����������#������"#�

1����#7�#�����%�� ������#�-:#����#"���

���#��-=#����#"���1����#�� ��#"������#��-���-��������#����#"���

L(��"#"��� ���������������#���7���+��#�"�������� ���#"���������"#����#��#������)�+������#�. ��B1 $�&C��"#��#�����*��������.���������#����.������#�����>0<���#�������.�#������.���#����������#��

������������#���6�#�>���� �<�����������B)�%���C��"#�����#��� �������#.� �����"��#���(�����#�:� �����#�. ��B1�%��C�

4–19OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Understanding Work Orders in Accounting

����7���+��#�"���(�����#"����#���#��*���#����"�#����"#����*�����������#��/���� ���#"��+��� �����+ ���#����#"���������#���"��#�����*��������������++��#�����+��#�"���������#"���������"��"� ���++��#�"�#��#������������� �#������#���"��#����������������#����#����#"���#��#�����.�#���������+�����"�����������#����� �� �#��#�����"��������������������� ���#"��+��=�"�����

(���*�����"����D��#�#�������������#�"��D���#"#���+����"#���.�����"�����#���(���*��������"#��+5�

� (������

� (���#� "#

� )��#"���"�#��#"��

������#������*����������"���#"+�����#���������#���"#����"#�.����0� ��#����D���#"#�������#����D��#�����#��+��#�����*������(+#�������������#��"������#�����������D�"���#������������"#����������������� ��#�����*��������.��"��#�����*��(��������� �#��#�����*������������#�#��*�#��+� ��"��5�

� ���� �#���"#��

� 7�#�"� ����

� ;���#"#"��������

� G����+�����"������������� �#"������

About the Parts List and Routing

(+#��������������#�������*������������������#��##������6�#�<"#�B6 $$$C����)��#"���-�#��#"���B6 $$�C�#��"��"��#��#�����#�������� ������"��������#"����D�"���#����*��#���"#����A��������##����#�����#� "#�������#"��"�#��#"���"�������+�#�������5

� 7���� ��

� -�#���#"�� ���+�����#�0��������������"���#�������#�����#��+��#���"#��H�." ��+���#�"� �����#"�����#�����+�� #���#��+��#�����#� "#����#"���"�#��#"����A����������"+��#�����#��

Product Costing and Manufacturing Accounting

4–20 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� (�#���#"�� ���#������#�����*�����>����#"���������B) $8$�C����"��#������*�����"���+�#���"#��H�." ��+���#�"� �������#"����������#����+��#���"�"#"� ���#� "#�������#"���"�#��#"����A����������"+��#����#�����"���#����� ��� �������#���##����#�����#� "#�������#"��"�#��#"���"����.�#����A���� �����#�"���#����#�������#��������������+����#"�������#"���

Standard Costing

�����#�����#� "#�������#"�������##������"�#���#"�� ����"��.�#����"#��#����*�����>����#"����������#����#����������#���+�@���#��������#����#�������#���#���������#��#���6����#"�����#�#�. ��B1 $��C������+�@��#��������#������+���#�����#���������#�#�. ��B1 ���&C��.�������#���"�"�� �." ��+���#�"� �������#"������������#���#������ �� �#���+���#���� ���"��#�����#���������#�#�. ���.�������#�������#�." ��+���#�"� ������#"���"�#��#"���

-+����"���������3"#�.�#�����#���+�@���#��������#�����#�������#���#�#��������#��+�#����"��������.������#������"���"�����"������A��������"�����"���"�����"������+#�������##��������#� "#�������#"���"�#��#"���#�����*�����

Actual Costing

1����#�� ���#"����#����#����� �� �#������#���#���������#��#��6����#"�����#�#�. ��������#����#"������#�+���#�����#�<�����#�. �B18$�2C���"���#�����������#H�"����#�����#���#����

1������#���#"�����#��#����#����#"���� �.����������"����#��.������#�������+��#�"������#��#�������#����#"�����#��+���#�����*����#�)�#��#�. ��B1 ����C���+������ ������#�������D�"����#�." "����#������+"����"��#���>���"��7����0)�#��#�. ��B $0�)C�

See Also

� "�( �+ ���)������ ���������+��"�+���#"����������#���"� ���#�����#������"��������"�#����"#������*��������#������� �

� ���� �������������� ������������+��"�+���#"����������#���#�#�����#��#�+����#"����� �� �#"��

Understanding Work Orders in Accounting

4–21OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What Happens When You Revise a Work Order?

(+#���������#������*����������##��������#� "#�������#"���������"��#�����#����*����""����-+�������"��#���D���#"#���D��#����#�����#� "#����#����#"���������"��#�� ����"��#�����#��+�#�����*�������������"�����#����� ���� ��������#�

����������������� ���#"��B6 $���C��#����#����� �� �#��#���� ��������#+���#����� ���"��#�����#� "#�������#"���"�#��#"�����������#��#��6����#"�����#�#�. ��B1 $��C�������#����������#�������#���#�#��#�����"���� ��������#��-+����"���������3"#�.�#�����#�������#���#�����#��� ��������#��#��������#��+�#����"��������.������#���� ��������"�����

-+�������*�������""���#������*��������� ��������"�����"���#����#���

See Also

� ���� ���4���������� �������$� �����+��"�+���#"����.��#�/���� ��#"��+����"����

What Are Unaccounted Units?

9�������#�����"#������#�#���D���#"#"�����������#��+�#����#"���#��#��������"�#�����*��������������"�����#��������� �.������� �#"����A��������"�����������#�����"#�#������#���9�"��� ���. �:�������������#����.��#����#�����#" ������������� ���#"��+����*�"�6���������� �#"�������#����������#��/���� ���#"��+��#����������#�����"#�����#���������#�����������#�����"#�

����6�#�<"#�#�. ��B1 $$$C�#�����������#�����"#����������#�#��#�������#���.����*�����"���

������*�����)��#"���#�. ��B1 $$�C�#�����������#��� �.����"#���������#��������������#�����������#"��� �.����������"�������

1��#��������#"����#�����*�����7�#��#�. ��B18��$C�#�����������#����"#�#��#��������#���.����*��������� �#"����1����#�� ���#"����#��6����#"�����#�#�. ��B1 $��C�#�����������#�����"#����������#�#��#�������#���.����*��������� �#"���

See Also

� $ �+ ����%����� ��;5����"��#������������;�����!� ���+��"�+���#"���������#�� ���#��"�+���#"����"#��#���9�"��� ���. ��:����

Product Costing and Manufacturing Accounting

4–22 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

What Happens When You Issue Material?

A�����#�����#����D�"�����#�"� �B��#C�#��#�������+ ���+�������#"�������D���#"#"��"����#��#�������+ �����������#���+���"����#���#��������-����#���-���B6 $$$ C�#����#"������"�#����#"������#�#�����#�� D���#"#"��������#��+���#�"� �#��#���������"��#��������#"��������#��#��-����#���7��������#�����7���+��#�"���(�����#"����#����

-����#���"���#����#"��������#������#��������#�#�������#"���#��#�#�����"�� �#��+���+�"����#���#�*��� �����A�������������#�����"�#�"��#�������#"��������������������#�����"����#��������#���+ ��#�#���"���+�#�����#�#��#�����*�����

����+� ��"��� "#�"���#"+"��#���+�������#��"�����#�"� 5

#���� ����� 7�#�"� ���������#���+���"����#��������������#��#��

"���#����#"������#���-���+���

0�������� -+�#�������"�����#"���"��#�#����������#�"� ���

��#���#"�� �������#���+���"����#������������*����

"��������#������#���6������*�����������

���������� 7�#�"� ���������#���+���"����#��������"#������#��

��*�����������#��������� �#�����"��"��#�.������

�������#���#"� ����� �#"���#�������#�#��������#"��

�������������������#�+� ����� �#"����#�#��� �#

��#"�������#"���

����� ���������� 7�#�"� ������#���#"�� �������#���+���"����#����#

����#"�����+"������������"�#�#�������#�#�����#"���

�����#���������"�#�������#��������� �#������#"� �

���� �#������������:��*+ ���������� �������#�

.��*+ �����#�"� ����� �.�������������#�"#��

���� �#���#��������#"����#�#�������#"���

-+������������.��*+ ��"���#������ �#����*����

#��#������#�� ���#"����������#��������� ���

��#�"� ����#��#��� �#�������"�#���������#��#������

�� "���.�+���������"���#��#������� �#"���+����-+����

�#�#�������"�����#"���#�����#���������"��. "��

������#�����#�������#�"�� ����#���:$�#�������8���#

+��#���#����#"���#��#������������"��#�"������

���������"�����#�#������*������#�����#����� "�����+���"����#��"����"�#� ���"#������#�"� �"���B-7C�#����#"����"##���#��#���-#���<����#�. ���������������#�����"#����������#��������#���"��#���6�#�<"#�#�. ���#" ������������� ���#"��+����*�"��6���������� �#"���

Understanding Work Orders in Accounting

4–23OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

)���� ���+�#�����#����#��#��������#��"�����#�"� �#������*���������������������� ���#"��+��=�"������#����������������#�����#��+��#�"� �"����#��#�����#��+���#�"� ����"+"������#�����#� "#������������� �� �#�������#�� ���"�����+�������"��������

������"������#�����#"�����#����#��#���������"����#����#�����+���#��+� ��"����� �� �#"������������"�����#�"� 5

������� �����

,������ 2>-

�� �� �#��#��������#��"���#�����#���������#�+�@��

�� �����#�*���+���#�����#�0���������������#�+���

+����� ����� ,������

24 �� ������ 23-

�� �� �#��#��������#��"���#����� ���"��#�����#�<����

#�. ��B18$�2C�+��#�����������#H�"����#�����#���#����

What Happens When You Record Hours and Quantities?

(������������"#����������*���������������#����������#��������#"�������#������.���+�"#������� �#���"��#��#�#"���

A���������#����������D���#"#"����#����������+�#���+��5

� 6��� ��"�����#��B6�2$$�$C

� G�������;���#"#"����#��B6 $$��$C

���������1 ���7��������#��#���"�#�+�����"#��6��� ��"�����#����#��##����#"�����#��"���. ��"��.�#��#��������1 ���7��������#�����6��� �#����A��������������������D���#"#"�������*������������� �����#����������#��.�#���"���E��*�������� �E�#����� ����������"�+���#"����#����"��6��� ���������#��#�. ��"��#���7���+��#�"������ "��#"����.�#��������D���#"#"��"�+���#"�����#����#������#���7���+��#�"��������������#�����#��#���#�. ��"��#���6��� ���� "��#"���

9��#���G�������;���#"#"����#��������#����������#�� ��������D���#"#"��#������*����������������"�+���#"��������+���#�����*����7�#��#�. �������"�+���#"���#��#�������#��"�#����"��#�����*���������#"���#�. ��B1 $$��C�

-�D�""���������#�� �������#����"���������"��#�����������D���#"#"����#���.����� ���������.����*������(+#�������������#�����������D���#"#"����#���������#�#���#����#"���#��#�����*�����)��#"���#�. �������#�����������#�����#��/���� ���#"���A���������+���#�����#�"�#���#"�� ���������������#�����������D���#"#"����������������#���G������;���#"#"��9���#��������B)$8��C����������#��#�*��#�����������D���#"#"�����������"�#���*���������#"���+���#�����*����������#"���#�. ���������#��#��"�����#"���+"� ��"��#�����*�����)��#"���#�. ��B1 $$�C�����

Product Costing and Manufacturing Accounting

4–24 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

#����#"�����#��"�#�������" �. ��+�����.������� ���#"��+����*�"��6��������� �#"���

Standard Costing

�������������#�� �.����������"����������������#�����"#����#����"��#����*�����)��#"���#�. �������������������+��#�"���������#"����#����#���� #"� "��#�����������#�����"#�.��#���+�@�����*����#���#��#���� �� �#��#�������#������� ���#"�������#���+�����#"�����#"�"#�����-G�/���� ���#"��

����������������� ���#"��+��=�"������#����������������#�����#��+��#�"� ����� �.�����#���#��#�����#��+���#�"� ����� �.�������"+"�����#�����*�������#� "#�������#"���"�#��#"����-+����"���������3"#��#������������#��#�����#�� ���"�����"��#���6����#"�����#�#�. ��

Actual Costing

�����#����#"�����#��+��������+�#����������������"���������������#�������+��#�"������#��#�

5���� ����� � ��*����#��)�#��#�. ��B1 ����C� ��� ������#��+���#���>���"��7����0)�#�

#�. ��B $0�)C� 7���� ����#�����#�

#���� ����� � ��*����#��)�#��#�. �� �D�"����#�)�#��#�. ��B1$ �$C� 7���� ����#�����#�

What Happens When You Receive Outside Operations?

������������"����������������+����#"�������#"����������#��#��D���#"#�����"��������#����#����"� ���)��#"���;���#"#"�������#�#��B6 $� C��#��#������������� �#��#���#����#"����������������"���#��������������#����#������#������=�#����#"���#��#���-#���<�����#��"������#�����E����"����#���+��#���D���#"#�����"������������������ �#��#�����#"���"�+���#"���#����#�������#��#���-#���<������"#������++�##"���-7�#����#"����������#�++��#�#��#���-#���<�����"�@�����E�����.� ������

�������"�#�� ������#��#�����������#�����"#�"��#�����*�����)��#"���#�. ��

Understanding Work Orders in Accounting

4–25OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������"������#�����#���#����#��#���������"����#����#��5

������� �����

,������ 2>-

9��#���+�@���#��������#�+��#�����#"�������#"��

�����#�+����#���#�����!

+����� ����� ,������

24 �� 23-9���#��#��������#�+���#����������������#

"��#�����*�����)��#"���#�. ��+����#���#������

�����%

What Happens When You Record Component Scrap?

(+#������"�����#�#������*�����������"��#������#�����#������+�#������������������"�����. ����#�"� �#��#��� #�+���#��������#"��������A������"+��#��������#��+���#�"� �#��.�������������#������������������#������

������������#�#���D���#"#���+���������#���#�"� ����������������#�������E�� ��-#��������#����#"���B-�C�"��#���-#���<�����#�. ������������������� ���#"��+����*�"��6���������� �#"����#����������� �� �#��#������(����#��� ���+��#�������#��-+�#��������#��+�#������������#�"� ��"++�+���#��������#����������#����#���." ��+���#�"� ��#����#������#�"�"++������#������#��#��������#��+�#�����#�� ���"�����

����#���+" ��#��#���6�#�<"#�#�. ��B1 $$$�C�#�����������#������������#������"#�

What Happens When You Record Completions?

���������+"�"�������#"����+�����*��������#�������+ ����������#�����#������� �#"���#��+"�"���������"����#���������#����#"�������#������"��#���-����#���7��������#�����7���+��#�"���(�����#"����#���

���� �#"�������������������#��+"�"���������#�"�#��"����#��������� �#�����������1 ���7��������#��#������"������� �����#������ �#�������#"�#��"����#����"�� ��"��5

� �����.��*+ ��"��

� 6�#"� ����� �#"��

� 1� ����� �#"��

� :��*+ ��"����#����� �#"��

Product Costing and Manufacturing Accounting

4–26 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

������������������ �#"�����������#��������������#�����"#����������#���#����"��#�����*�����7�#��#�. ������� �#"���#����#"���B-�C����"##���#��#���-#���<�����#�. ��������#����#"���B-�C�����"##���#��#���-#��<�����#�. ��������E�� ��#����#"���

������"���"++������.�#������"��#������+��#�"���������#"���������������+��#�"���������#"���"�#��#�#��#��"#�������������� �#"���������#�����"�#�#�����E0.�E�����#�������#����"�#�#�������#�������A����#������"�����#"���#��� ������� �#"����+���� ��������E0.�E�����#��G��������"�����������#������"�#�#��������

Standard Costing

��*��������� �#"����� �� �#��#���+"�� ��� ����+�#�����#���������#�+�#�������#���#���������#��#��������#��+�#�����#�� ���#�"��#���6����#"�����##�. ��

Actual Costing

A���������������� �#"���#���� ������ ���#"��������*������������*�������� �#"����������� �� �#��#���������"#���#���������#���+� ��"��5

� -+�#���"#��H���#���#����"��%��#������������ �����E�����"����#��.�������#���"#��H���#� ��� ��1���3��� ���"+�#���"#��H���#� ��� �"� ��#����������� ����� ��#�����E�����"����#����#�#��� ���#"���#����"�������������#������� �#"���

� ��������������#��#���-#�����#�<�����#�. ��

� ��������������#��#�����������#��������#�"��#���6����#"�����##�. ��

4–27OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Creating Journal Entries

A������#��/���� ���#"��+����*�"�������B"���� �.����#�����������"�����#"��C������ �#"������������+��#�"�����"�������#���+"#�#���#������#"���#����#����#"���#��#�������� � ������

������#��/���� ���#"��+����*��������#������� ��#����#"�������"#��+#���+� ��"���#�*5

� 9���#���"���/���� ���#"������#���#���E#"������

� ���#"���/���� ���#"��+����*�"������������� �#"��

� )��"��"��������#"�����#

� ���#"���/���� ���#"��+����"����

-+�����������3#����#������������"#���������������#�#���� �� �#��#��"���#����#� ������������#������#������������"�����"�����������#�"� �.������#�

See Also

� #����� �����)���%���)� ���$� ���

Understanding Journal Entries and the Three-Tier Process

�����������#����" ��/���� ���#"������������+��"���#���+"#��+�#����#��"��#��������������#���E#"����������"������"�����#�������#�� �������������#������������"�� ����#���+� ��"���#��5

$� ��#�"���/���� ���#"��"�#����.�#��

�� )��"��"������������"���#���.�#���+����#"��

� 6�#"���#���.�#���#����#"��

Product Costing and Manufacturing Accounting

4–28 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#��#���#���E#"������5�

1. Enterjournal entriesinto a batch

2. Review thebatch andapprove it forposting

3. Posttransactions

Journal Entries

Batch Review

Post GeneralJournal

Creates unposted batchheader records

Updates Account LedgerTable (F0911) with unposted

records

Batch HeaderRecords(F0011)

AccountLedger(F0911)

Batch HeaderRecords(F0011)

Batch HeaderRecords(F0011)

AccountBalances(F0902)

AccountLedger(F0911)

Updates batch header to an Approvedstatus and makes documents eligible

for posting

Updates batch headerstatus to a D (posted)

Posts transactions tothe Account

Balances table(F0902)

Updates AccountLedger records

(F0911)

����� ���#"�����������"��#������5

� 7���� ��������������#��#����#"���#������#���>���� �(�����#"���#���������5

� (����

� (�/�#���#

� )�� �"+"��#"��

Creating Journal Entries

4–29OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� (�#���#"�� ��������#�������� ���#"��+����*�"��6��������� �#"��������������#��/���� ���#"��.����������#����#��H#����#"���������5

� 7���+��#�"���(�����#"���B��"����C

� �����1 ���7��������#

-��#���7���+��#�"���(�����#"����#�����������������#�����#��/���� ��#"��+����"���#�����+�����+ �����#"�"#���"�� ��"��5

� 7�#�"� �"��

� <�.����������"������#"��

� ���� �#"��

� ����

� =�"����

� ���"���"��

� 6 �����

� 7�#�"� ������B��#�� C

� <�.���++"�"�����B��#�� C

� �#���B�� ���C

Detail and Summary Journal Entries

A���������#����#�" �����������#"��+��.�#����."#��������"#�/���� ���#�#����#"����9��#����./��#���#"����+�#���������#����.��#�����#� �#��� ��� ��+��#�" ��+�����/���� ���#"��

Detail Journal Entries

�����#����#�" �/���� ���#"��+������*��������#������� ��.����#��������#����#�����"++���#��./��#����."�"���������#����.��+���������#��������#�

1���3��� �5

��#���������# :�"���9�"# (�����#�4��.�

($ 7 � $ 8$

:$ 7 � $ 8�

:� 7 � $ 8

Product Costing and Manufacturing Accounting

4–30 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Summary Journal Entries

�������"@��#�����#���������#�+�����"#����������*�����"�#����"�� �/���� ���#�����#��#�����#��"#��#��������./��#������."�"���������#���.���

1���3��� �5

��#���������# :�"���9�"# (�����#�4��.�

($ 7 � $ 8�

:$ 7 � $ 8�

:� 7 � $ 8�

-�����"#"�������������#�����"�����#"���#�5

� �����"@����#�"� �"���B�������#�#����-7C�.��������#����.���"#�"�����*�������������"D������."��#"����+�������#����.��������*�������.���������/���� ���#��

� �����"@��� �/���� ���#"��.��������#����.��������*������������������������#��+��#���.�#���+�������������#��������#��"�#������+�� ���*�����#����#"���+�������������#�.���������#�#����

� 6"�#�������"@���(�����#"��������#"������#�

Creating Journal Entries for Work in Process or Completions

1���#���7���+��#�"���(�����#"��������B> $$&C����������*�"��6��������� �#"���

����� ���#"��+����*�"��6���������� �#"������#��/���� ���#"��+�����+ �����#"�"#���A����������#�#����#"���+����#�"� �"�������� �#"������� �.����������"����������"�#�����*��������#������� ���

��������������������������"+�"#�+"������������ � ����������" �+���##"���#���/���� ���#"���A��������"���������"��#�����.�"##�����.;�����"��#������ �������*����#�������$ �+ �����������"��#�����������

����� ���!� ���+������"�+���#"����.��#�����������D�����

��"����������#���+� ��"���((-�#�. ��#����#���"����#���������##����#"���#������� � �����������#5

9662

(���� ������! ���

��������:������������

7����"����#�����#�+���"����#�����"���"��

���#"������"�((-�"���#�����+����"�����������#"���

Creating Journal Entries

4–31OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

9642

.���:����� ����

�������

7����"����#�����#�#���-6���"���"����#���"������

�����������#"������"�((-�� �������"����#���+��

�-6���"���"����#������� �#"������#"���

9692

.��� ������!

������������:�����

�����

7����"����#�����#�#��"����#������������ �#"�����

���#������"�((-�"���#�����+����"�����������#"���

9726

(���� ��������

7��������������#�#������� ���"����������

���#"������"�((-�"���#�����+����"�����������#"���

�����#������#���+� ��"�����#��#����#���#���#����#"���#��#���((-�������#5

� ��*�����#����+��#���((-�

� �����������.�����"�#����"#��#�����*���������������#.����0� ��#��-+�#����#���������#�+"�������#����"#����������

� �������#�#�������"�#����"#��#���#����#"���

� >0<���#����������+��#���#����#"���"#����-+�#����#���������#�+"������#����"#����LLLL�B+����#�"*C�

� ��#���������#�

� :����0� ��#�

Standard Accounting

������������#��/���� ���#"���#��������� ���#����������#�����"#�"��#��6�#�<"#�#�. ��B1 $$$C����*�����)��#"���#�. ��B1 $$�C��������*����7�#��#�. ��B18��$C���������#��/���� ���#"��+��#���������������#��������#�����������#�����"#�

����������� ������#��"�+���#"���"��#���6����#"�����#�#�. ��B1 $��C���"�������� ���#"��+��=�"��������#�����#��/���� ���#"��+��#����#"���"#����"�����

@���� (+#��#���6������*������������#�. "���#��������#�+����+"�����"#����/���� ���#"��+�����+"�����"#���������#���"��#������������+��������+"�����"#���

Product Costing and Manufacturing Accounting

4–32 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Actual Accounting

1����#�� �������#"����#����������� �� �#����#���+� ��5

#������ (���� ,+ - �����������#"����#�����������#�����"#����������#

+���#���6�#�<"#�#�. ��

����� 5���� (����

,� -

�����������#"����#�����������#�����"#����������#

+���#�����*�����)��#"���#�. ��

����� $������� (����

,( -

������"������#�������������#"�������� ��#���"�

7���+��#�"������#��#��#����������� �� �#���������

��#�.������� �.����������"�����#������#"������*

���#���#���#������������#���"#��H�"����#�����#

��#����

$����� $�������

,������� . -

������������"���#��������������+��#�����#"��

����#"����#����#�������#��#�����*�����)��#"��

#�. ���"#��#�����#�� ��������������#�

/ ���� ,������� I - A�������� ����#���3#����#����#�����#����#

��������#�+���

��������������#��#���6����#"�����#�#�. ���"#��#���������"#���#�

See Also

� "�( �+ ����������� ���##&��+�����"#"��� �((-�"�+���#"��

� ".10/82��������� ���4���������� ���"��#���"�������!� ���+�������#��� �

Processing Options for Journal Entries for WIP or Completions(R31802)

Default Tab

���������"�����#"�����+"�����+�� #��� ���

1. Date

9��#�"�����"�����#"���#�����"+��#�����#��#��#����������/���� ���#"���-+���� �����#�"�+"� ��. ��*��#������������#����#�����#��

Creating Journal Entries

4–33OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

2. Document Type for Scrapped Items

9��#�"�����"�����#"���#�����"+����"����������#�#����B��0��C�#���"���#�����#����#"����-+����� �����#�"�+"� ��. ��*��#�������������������#�#���-��

3. Document Type for Shop Floor Transactions

-+����������#������#"�������#�"�����"�����#"���#�����"+��#����������##����B��0��C�+��/���� ���#"������3#����#���������#��-+����������#"���#�����������#���#"�� ���"������������#�#�����+�-G��-+����� �����#�"�+"� �. ��*��#�������������������#�#����-G�

4. Status Code for Work Order

9��#�"�����"�����#"���#����#��#�������#�#�������B��0��C�+��#�����*�������������������#��#�����*�����#�#�����#����������#��������"�����+��������"��+"�� ���������#��#�������#�#���������������"#�+���#���� ��#�9����+"��������+����-+����� �����#�"�����"�����#"���. ��*��#��#�#���+�#�����*�����������#��������

5. Subledger Field

9��#�"�����"�����#"���#�����"+�����#���#�����*��������.��"������#�����+�� #�"��#�����. �����+"� �����"���#"���������#���� ��������"������"@���/���� ���#"���=� "���� �����5

: ��* �����#���� ������+�� #��� ���$ 9��#�����*��������.����#�����+�� #�

Process Tab

9��#��������"�����#"���#����+"�������"����"#�"��

1. Final Mode

9��#�"�����"�����#"���#��"��"��#�����#���#������������"�����+�������+"�� ������

)���� ���+���"�����#��������� ��#��#���#�#����������#�����*�����"����#��������"���#��#����� ���������#��"��#�����*������#�#����������"�����#"���

=� "���� �����5

$ 1"�� ��������������������#��/���� ���#"������� �����������#����"#�

Product Costing and Manufacturing Accounting

4–34 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

: ��* 6��+�������������������+���� ��� �� �#"���������"#�������"�##����"��#������#�

2. Summarize Material Issues Within Work Order

9��#�"�����"�����#"���#�����"+�����#���#������"@����#�"� �"��/���� ���#"��.��������#��"#�"������*�������������������#������/���� ��#��+���������"D������."��#"����+�������#����.��������*��������.��

-+���������"@��������" ���#�.���. ��#����#���#�" �/���� ���#"���"���#����#��"�E�"���6�+"#�. "#���� �#"���

=� "���� �����5

$ �����"@��.��������#�: ��* �����#�����"@��.��������#�

3. Summarize Material Issues Across Work Orders

9��#�"�����"�����#"���#�����"+�����#���#������"@��� �/���� ���#"��.�������#�������*�����

=� "���� �����5

$ �����"@��� �/���� ���#"�����"���#"����" �������#������.���+/���� ���#"��

: ��* �����#�����"@��

4. Flex Accounting

9��#�"�����"�����#"���#��"��"��#�����#���#�"�������������+��+ �3������#"���� ��#������ �#����#��./��#�"��#���(�����#�<�����#�. ��B1�%$$C�1 �3�������#"���"��D�"���#���##������#��./��#�#��#���/���� ���#"��

=� "���� �����5

$ 9��+ �3�������#"���: ��* �����#����+ �3�������#"���

5. IM Credit Charge to Business Unit

9��#�"�����"�����#"���#��"��"��#����"����� ���#��������������#��.�"�����"#�+��#������"#�"����+���#�"� �"���B-7C�#����#"����=� "���� ����5

: ��* 9��#�����������#�.����0� ��#�$ 9��#���������#����#����#��+"� �����#�����*�����

Creating Journal Entries

4–35OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Print Tab

9��#��������"�����#"���#����+"����"�#��"#�"��

1. Accounting Journal

9��#�"�����"�����#"���#�����"+�����#���#���"�#������#�

=� "���� �����5

$ 6"�#������#�: ��* �����#��"�#������#�

2. Subtotals

9��#�"�����"�����#"���#�����"+�����#���#���"�#��.#�#� �.���������##���������������#����.��

=� "���� �����5

$ 6"�#��.#�#� �.���������#�#���������������#����.��: ��* �����#��"�#��.#�#� �.���������#�#�����������.��

3. Summarize Material Issues Within Work Order for Report

9��#�"�����"�����#"���#�����"+�����#���#������"@��/���� ���#"��+����#�"� �"���B-7�#����#"��C�.��������#����.���"#�"������*��������#�����#����"�����"�����#"���������#��++��#�#������.���+�/���� ���#"��#��##������������#���A�����������"@��#���/���� ���#"�����#������#���#�����������"@��#�����#�� �/���� ���#"��

=� "���� �����5

$ �����"@��/���� ���#"��+����#�"� �"������#������#�: ��* �����#�����"@��/���� ���#"��+����#�"� �"������#������#�

4. Summarize Across Work Orders for Report

9��#�"�����"�����#"���#�����"+�����#���#������"@��� �/���� ���#"��.�������#�������*��������#������#����"�����"�����#"���������#��++��##������.���+�/���� ���#"��#��#�#������������#���A�����������"@��#��/���� ���#"�����#������#����#�����������"@��#�����#�� �/���� ���#"��

=� "���� �����5

$ �����"@��� �/���� ���#"�����#������#�: ��* �����#�����"@��� �/���� ���#"�����#������#�

Product Costing and Manufacturing Accounting

4–36 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Production Costs

����6����#"�����#�-�D�"���������"� ���#�����#�������"��������"�#���"#������*��������#������� ���A��������"�����"�����.�������"�������#��� �� �#���"�����������#�������#��� �� �#���"�����#���������7���"�� ���5�

� 1�@��

� ����#

� (�� �����

� (�#��

� ���� �#��

1��#��������#"������"�����"�����#��"���#"+�����.�+��������������� ��#"��+��=�"������1���3��� ���"+������"����#�"�����#�#������*�������#������� ����� ������#�� ���"������������A�������"���#�����#���������� ���#"��+����*�"��6���������� �#"����������"���#�����"�������"���(+#����������#����������������� ���#"��+��=�"�����

@�����A�����#����#��������#"���+�����+"�����"#����-+���������+��#��

���+"�����"#������." ��+���#�"� ��3"#����������"���"�����"������3"#�

&� ����� �������� �����

1���#���7���+��#�"���(�����#"��������B> $$&C��������6����#"�����#-�D�"��

Creating Journal Entries

4–37OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� ���6����#"�����#�-�D�"������� �#��#���+� ��"���+"� �����#����� ��#"���"#�"��#�.5�

� ����4��.�

�� � "�*�#����"� ���#�.�

� ����"+�����#���#����#����"� �����#�+��#�������#����������#�����E0.�E�����#�.��� "�*"��������+�#���+� ��"�����#"��5

� 6���#

� ��������#

� ��:�

8� ����"+�����#�"�+���#"���#����#����"� ���.��� "�*"���������� ��+�#��+� ��"�����#"��������#����"� ����� ��������"��5

� (����#

� 9�"#

� =�"����

2� ����"+�����#���#����#����"� ������������#�����"#�.��� "�*"�������+�#���+� ��"�����#"��������#������� �#�����#� �����"��5

� -�� ��������

� ���H#�-�� ��������

&� � "�*�#����� ����#�.�

Product Costing and Manufacturing Accounting

4–38 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

!� ����"+�����#������#����#����"� ���"���� ����$�.��� "�*"��������+�#��+� ��"�����#"��5

� �#�����

� ����#

� 6 �����

� (�#��

� ���� �#��

� �������

�� ����"+�����#������#����#����"� ���"���� ������.��� "�*"��������+�#��+� ��"�����#"��5

� �#�����

� ����#

� 6 �����

� (�#��

� ���� �#��

� �������

%� � "�*�1"���

$�� ������"���������#������������#���"� ��������#����"#����.�#���������#������������#���"� �����"��������"���#���"�+���#"���#��#�"� ���"��#�����#�" �����

Creating Journal Entries

4–39OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Production Cost Inquiry

Display

1. Enter default level: ____________ 1 – Parent 2 – Component 3 – Co/By Product

If left blank the default value will be Parent. 2. Enter 1 to display Amounts. ____________ 3. Enter 1 to display Units. ____________ 4. Enter 1 to display the ____________ Variances.

Columns

1. Enter amount type to be ____________ displayed in column 1: 1 – Standard 2 – Current 3 – Planned 4 – Actual 5 – Completed 6 – Scrapped.

2. Enter amount type to be ____________ displayed in column 2: 1 – Standard 2 – Current 3 – Planned 4 – Actual 5 – Completed 6 – Scrapped

Versions

1. Enter the version for ____________ Inventory Issues. 2. Enter the version for Work ____________ Order Entry. 3. Enter the version for ____________ Production Status.

Product Costing and Manufacturing Accounting

4–40 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Creating Journal Entries for Variances

1���#���7���+��#�"���(�����#"��������B> $$&C��������=�"�����

Before You Begin

� )����������������#�#����"������������#"�����#�������"���������"�( �+ ���"������������������� ���#������ ���+�����������+�#�����" �. �����#�

��������������������������"+�"#�+"������������ � ����������" �+���##"���#���/���� ���#"���A��������"���������"��#�����.�"##�����.;�����"��#������ �������*����#�������$ �+ �����������"��#�����������

����� ���!� ���+������"�+���#"����.��#�����������D�����

������������#�"�������"��+"�� �������#����#������#����.�#����+�/���� ��#"��+����#"���#��#�������� � �����

Standard Costing

-��#��������#�������#"��������� ���#"��+��=�"��������#����#�" ��������/���� ���#"��+����*��������#������� ����"����������"�� �������"���"����� ���������#�� �������#�����"�����#����#"���+��#��+� ��"���"#��5�

� 7�#�"� �"��

� G�����#�

� 7�#�"� ����� �#"��

-+��������������#���#�����#���#�����!�B�#�����C�+��#������������#��#���#������ "��#�����#�� ���#"��� ��"��#����#�#���"#���

Actual Costing

-+�#�����#���#����"��#�����*�����������+��#������������#�"�������#�����������!�B�#�����C��#����#������ "����#�� ���#"��� ��"��������#���#"����#�������#�������#�+���((-�#�. �� �$��+����������� �#"���������#��+������� ��+��������#�"�+���#"���

-+�#������������������#��������#�������������#���=�"������������#���#���� �����*�"��������������#����������"#���#�.�������#��+� ��"����� �� �#"��5���#� ���#�� ������#��"�"����.������ �#���S���������"#��-+�������������#��������#��3"#�����#�����*�����"�#�����#����� ���#�#���#���=�"�����������#����������#���������������A�����#���7���+��#�"�������� ���#"��#������ �#��#�������+��#�"���������#"������"��

Creating Journal Entries

4–41OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1����#���#��������B��"��#���(��������#C�#����#��5

� 9���#��#�����"��#������������#

� ���#��-=�/���� ���#"��#��� �����*�"������

� ���#���������"��#���-#���<�����#�. ��+����������#��������#��"��#���+� ��"����� �� �#"��5�(�#�� �'����� �#���S�����

1����#���#�����%�B(�#�� ���7���+��#�"���<�#C�#����#��5

� )��� �����E�����"����#���.�������#���������"#���#�B+����#� ��� "#����"#��0.��������"#��0.����0 �#0 ���#"��C

� 9���#��#���-#�����#�<�����B18$�2C

� 9���#��#�����"��#������������#

� ���#��-=�/���� ���#"��#��� �����*�"������

� ���#���������"��#���-#���<�����#�. ��+��������������#

����-:�#����#"���"�#����"++������.�#�����#�����*��������� �#"���� �� �#"�������#�������� ���#"��+������ �#"����� �� �#"����-+����������"�����"#���.�+��������������� ���#"��+������ �#"����#���-:#����#"���"����#���.�#�����+"�"���������������#��+������� ��

-+�#�����#���#����+��#������������#�"����#�"����#���#���������!�����%�#���#������#��� ��"��+����#���#�������B��"��#���(�����C�

See Also

� "�( �+ ����������� ���##&��+�����"#"��� �((-�"�+���#"��

� ".10/72�$� ����4���������� ���"��#���"�������!� ���+�������#���� �

Processing Options for Journal Entries for Variances (R31804)

Defaults Tab

���������"�����#"�����+"�����+�� #��� ���

1. General Ledger Date

9��#�"�����"�����#"���#�����"+��#�����#��#��#����������/���� ���#"���-+���� �����#�"�+"� ��. ��*��#������������#����#�����#��

2. Document Type for Manufacturing Variance

9��#�"�����"�����#"���#�����"+��#��������+"���������B��0��C�#��#"���#"+"��#����������+�#����������#�������������"���#�"��������#�#���

Product Costing and Manufacturing Accounting

4–42 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

#����"�����/���� ���#"������"�� ���#����������#�#����"�-=�B��"������ �� �#���+����*����C�

3. Subledger Value

9��#�"�����"�����#"���#�����"+�����#���#�����*��������.��"������#�����+�� #�"��#�����. �����+"� ��

=� "���� �����5

$ 9��#�����*��������.����#�����+�� #�. ��* �����#���� ������+�� #��� ���

4. Work Order Status Code

9��#�"�����"�����#"���#����#��#�������#�#�������B��0��C�+��#�����*�������������������#��#�����*�����#�#�����#����������#��������"�����+��������"��+"�� ���������#��#�������#�#���������������"#�+���#���� ��#�9����+"��������+����-+����� �����#�"�����"�����#"���. ��*��#��#�#���+�#�����*�����������#��������

5. Actual Costing Document Types

Scrap

9��#�"�����"�����#"���#�����"+��#����������#�#����#��#�#����#������#��#"����"�+���#"���+���((-� �$�������������#���."#���� "����#��������#"����+���*�"��6�����-+����� �����#�"�+"� ��. ��*��#����#������������#�#����-��

Completion

9��#�"�����"�����#"���#�����"+��#����������#�#����#��#�#����#������#��#"����"�+���#"���+���((-� �$�������������#���."#���� "����#������� �#����#"����+���*�"��6�����-+����� �����#�"�+"� ��. ��*��#����#������������#�#����-��

Cost of Goods Sold

9��#�"�����"�����#"���#�����"+��#����������#�#����#��#�#����#������#��#"����"�+���#"���+���((-� �$�������������#���."#���� "����#�����#��+>������ ����#"����+���*�"��6�����-+����� �����#�"�+"� ��. ��*��#����#������������#�#�������

Process Tab

���������"�����#"�����+"�������"����"#�"��

Creating Journal Entries

4–43OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

1. Journal Entries Mode

9��#�"�����"�����#"���#�����"+�����#���#������������"�����+�������+"�� ������

)���� ���+���"�����#��������� ��#��#���#�#����������#�����*�����"����#��������"���#��#����� ���#��#�������#��"��#�����*������#�#����������"�����#"���

=� "���� �����5

$ 1"�� ��������������������#��/���� ���#"������� �����������#����"#�

: ��* 6��+�������������������+���� ��� �� �#"���������"#�������"�##����"��#������#�

2. Summarize Across Work Orders

9��#�"�����"�����#"���#�����"+�����#���#������"@��� �/���� ���#"��.�������#�������*�����

=� "���� �����5

$ �����"@��� �/���� ���#"��: ��* �����#�����"@��/���� ���#"��

3. Flex Accounting

9��#�"�����"�����#"���#��"��"��#�����#���#�"�������������+��+ �3������#"���� ��#������ �#����#��./��#�"��#���(�����#�<�����#�. ��B1�%$$C�1 �3�������#"���"��D�"���#���##������#��./��#�#��#���/���� ���#"��

=� "���� �����5

$ 9��+ �3�������#"���: ��* �����#����+ �3�������#"���

Print Tab

���������"�����#"�����+"����"�#��"#�"��

1. Accounting Journal

9��#�"�����"�����#"���#�����"+�����#���#���"�#����(�����#"�������� ���#�

Product Costing and Manufacturing Accounting

4–44 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

=� "���� �����5

$ 6"�#����(�����#"�������� ����#�: ��* �����#��"�#����(�����#"�������� ����#�

2. Subtotals

9��#�"�����"�����#"���#�����"+�����#���#���"�#�#����.#�#� �.���������#���.��

=� "���� �����5

$ 6"�#�#����.#�#� �.���������#����.��: ��* �����#��"�#��.#�#� �.���������#����.��

3. Summarize Report Across Work Orders

9��#�"�����"�����#"���#�����"+�����#���#������"@��� �/���� ���#"��.�������#�������*��������#������#����"�����"�����#"���������#��++��##������.���+�/���� ���#"��#��#�#������������#���A�����������"@��#��/���� ���#"�����#������#����#�����������"@��#�����#�� �/���� ���#"��

=� "���� �����5

$ �����"@��� �/���� ���#"�����#������#�: ��* �����#�����"@��� �/���� ���#"�����#������#�

Over Under Comp Tab

9��#��������"�����#"���#�����"+�����#���#����#����#�#����#�����#����"+��#���#�#��#�����+����� ������*�����

1. Restate Production Costs

9��#�"�����"�����#"���#�����"+�����#���#���#�#��#�����#����"�� "�"��#���"�����#��#����������.����������������� �#"����������������"#���

=� "���� �����5

$ )�#�#��#���#�����������#������� �����������#"�����#�.���������� �#��������������D���#"#��

: ��* �����#��#�#����#�

2. Closed Work Order Status

9��#�"�����"�����#"���#�����"+��#���#�#������#��� �������*������ ������*����������#������#�����"#"��� �/���� ���#"���-+����� �����#�"+"� ��. ��*����#�#��������+�%%�"�����+����� ������*�����

4–45OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing General Ledger Batches

(+#�����������#��/���� ���#"���������"��������������#����.�+�����#"��#����#��#�������� � ��������"���"���"�#���������#���"��#�������������#���E#"��������-�����"#"��������������"�������+��#�"���/���� ���#"��+�����"@�����*�����

Before You Begin

� ��#�#������������#������� �"��(�� "��#"������#��#�+�������"��/���� ���#"��+����#"������"�����������#�����*+ ����������"." "#�����#� �#��#������#�. "��+����������"@�#"����A�������(�� "��#"������#��#�+�����*��"#��:����06 ��#����#��#�

See Also

� ���� ���4���������� ���"+����������#�����#��/���� ���#"�

� #����( ������%������4���������� �������)��� ���"��#���!������#������ ��!� ���+��.�"��"�#��#"��������"��"������������"�������� � ����.�#���

&� ����� ������ ������ �������

1���#���7���+��#�"���(�����#"��������B> $$&C��������>0<�)��"���E�.���*�����4��.��

Product Costing and Manufacturing Accounting

4–46 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

$� �����*��"#��>0<�)��"���E�.�����4��.������� �#�������������+#���+� ��"���+"� ��#�� ���#����.�#����+�/���� ���#"������� "�*�1"��5

� 9��-�

� �������#�4��.��1��

� �������#�4��.����

� ��*�����4��.�

� >0<���#��1��

� >0<���#����

�� ���������������� "�*��� ��#�

Reviewing General Ledger Batches

4–47OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

� ���>���� ������ �)��"������������#����#"�������� "�*��� ��#�

8� �������� ���#�����#������������������������� "�*��F��

Product Costing and Manufacturing Accounting

4–48 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

4–49OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Posting to the General Ledger

9���#������������#�.� ������"#�������#�+���/���� ���#"��.����#"���#��/���� ���#"��#��#�������� � ������(+#����#"����#����#������"������� ���#�#��#������������#���"���#�����#���/���� ���#"���

6�#"���#��#�������� � ��������"#��+�#���+� ��"���#�*5

� 6�#"�������+��#�"���/���� ���#"�

� )��"��"���#���-#���<����0(�����#�-�#��"#�����#

� )��"��"������#�+������+��#�"���������#"��

Posting Manufacturing Journal Entries

1���#���7���+��#�"���(�����#"��������B> $$&C��������6�#�>���� ����� �

(+#��������#�����"���������������/���� ���#"������6�#�>���� ������ �#���#�#���/���� ���#"��#��#�������� � ������

Before You Begin

� =�"+��#��#�#���.�#�����������������#�#�������#����( ������%�����4���������� ���"��#���!������#������ ���!� ���

� =�"+��#��#�#�����#�"��.�"##���#����"�� �E#�������/�.�D�����

A��������� �����������#��#���#"����A�����#������#��#�� ���#������ ��#"��������#���#��#�������/�.�D���������#��#�#���/�.�D������� ��� ������/�.�#��������#���#"���

(����5������������#��� �����������#��#����������#���#��"@��#�����#������

������#�"�#���#�"��#����+�#��������������#���E#"��������������#�"#� +���"#��+�#���+� ��"���#�������5

� 6���#

� 6�#

Product Costing and Manufacturing Accounting

4–50 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Prepost Process

��������#���������"#��+����� �� ����#5�

������� ����6�#�>���� ������ �������� ��#�����#���

��������#����#"����"#����.�#���#�����+��������#��

�"#�"�����"+"���"��#�������"�����#"��������

#����#"��������+���#���(�����#�<�����#�. ��B1�%$$C�

.���� ��� ������������ "��#�������#����#"���#����#��"��

���#��5

� ����������#��3"#�"��#���(�����#�7�#��#�. �B1�%�$C�����"�����#"���������#

� ����.�"�����"#�"��� "��"��#���:�"���9�"#�7�#�#�. ��B1���&C

� ����>0<���#��"��� "�� -�#���������#����#"����3"#� ��#�" ���������#�#����#���� ��.������

����� ��� ������������ "��#�������.�#���#�������#��#�"#�"

������������"��.� ������-+�#���������+"����������

"#�������#���#�#���.�#���

0���� /�� ������ ��"����#� "#�� �.�#������#��#�������-#��"�#�"�

.�#����D������

/���� ������ -+�����#����#"���"��#���.�#���"�"������#��������

� ����#�����#"��.�#���"��������"��������#�#���.�#��

�"#��#������+�����#"���

(������A������ ����#���*���������#��#���������#��((-��"�#���������## ����#������� �������#"������#��#��������"�����#"��������������#�����#�

Posting to the General Ledger

4–51OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"�������"��" �#�#��#�������#�����5�

The sys-tem

selects un-posted,

approvedbatcheswith aBatch

Type of 0

POST

Batch ofJournalEntries

Check that status =approved and thatjournal entries arein balance

Change BatchStatus Code to D(Posting if correctand in Balance)

Change BatchStatus Code to E

(Error)

CorrectBatch

IncorrectBatch

Posting EditReport

CorrectBatch

IncorrectBatch

ERRORCONDITION

IN

Product Costing and Manufacturing Accounting

4–52 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Post Process

����6�#�>���� ������ ��������� ����#�.�#����+����"�����������+�����"��#�������#�������-������� ��#��������5�

� 6�#�#����#"���#��#���(�����#�:� �����#�. ��B1�%��C�������*�����#����#"�������#���.�#�������������#���"��#���(�����#�<�����#�. �B1�%$$C�����#���:�#������#� �#�. ��B1��$$C

� �������#���.�#���#�#��+��#���:�#������#� �#�. ��#���

� 7�*������#����#"����"#����#�#���+�6�B��#��C

� 6�+���"�#����������## ����#�+�� �����#����((��K(��A(���(��(R�����R(��"+��D��#���

� ���#�����"�����#"���"+��D��#��

����+� ��"�������"��" �#�#��#�����#�����5�

Batch ofJournal Entries

IntercompanySettlements

ReversingEntries

Post

Account Ledger(F0911)(Updates with P)

Account Balances(F0902)

Batch Control(F0011)(Updates with D)

PostingJournalReport

Posting EditReport

(If errors exist)

����6�#�>���� ������ ��������������#���+� ��"���#������#

� 6�#"�����"#����#

� 6�#"���/���� ����#

Posting Edit Report

��"����#� "#������#��#�����"���#�����#��-+�#���������+"�������"#������#���#�#���.�#����A�����#�����#�� ����.�+�������������#�#��.�#���

Posting to the General Ledger

4–53OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

����+� ��"���#�. �� "#����������#"����������#��"�����5

����� �� �������� ���

�����

��"����������"�������.����.�#����"#��������"����

���#�#��

+����� �� ��� ��

+����� #����� �����

,12326-

����"#��#"������������#�"���������5

� (������+"����������#����.��B��"���#�����Q��"���/���� ���#�C������#������������#�#�"� ���#��#����������#����.������ "������.�����#������� ���#"��+��������������#���Q����#�����#�" "���#��#����� "��������#����.��

� (������+"����������#����.�������#��#�����"��#���#"������"#�������#����#�#������� �������#��"#�"�#��.����#���#"�� �����#���.��#����#����(���#��>0<�������#����.�����(�����#�.���./��#�

����� C����� �����

���%��%������

��"����������������������."#������#��D��

���"#��-+�#�����#E�+E.� �����/���� ���#�������#����"�

��������#�#������������#�#���.�#������"��

�#���"#��#"��������������/���� ���#��#��.�

��#E�+E.� ������1���3��� �5

� (������+�" ����"��#���������������"�����#�����#"���

� (��� "������E"����/���� ���#���"��#������.�����#����#������#��������"�������������"���#���

Posting Journal Report

��"����#� "#�#���#����#"�����#���#��#���(�����#�:� �����#�. ������#��#��(�����#�<�����#�. ��

See Also

� ���� ���4���������� ���"+����������#�����#��/���� ���#"�

� )��� ���4���������� ���"��#���!������#������ ���!� ���+������ �#�"�+���#"����.��#���#"���/���� ���#"�

Processing Options for Post General Ledger

Print

1) Enter which Account Number to print on the report. ’1’ = Structured Account; ’2’ = Short Account ID; ’3’ = Unstructured Account; ’ ’ = Default Account Format.

Product Costing and Manufacturing Accounting

4–54 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Account Format ____________

Versions

1) Enter a version of the Detailed Currency Restatement (R11411) to execute. If left blank, Detailed Currency Restatement entries will not be created. (i.e. ZJDE0001)

Detailed Currency Restatement ____________ Version

2) Enter a version of the Fixed Asset Post (R12800) to execute. If left blank, Fixed Asset Post will not be executed. (i.e. ZJDE0001)

Fixed Asset Post Version ____________

3) Enter a version of the 52 Period Post (R098011) to execute. If left blank, 52 Period Post will not be executed. (i.e. ZJDE0001)

52 Period Post Version ____________

Edits

1) Enter a ’1’ if you wish to update Account ID, Company, Fiscal Year, Period Number, Century, and Fiscal Quarter in records being posted, prior to editing and posting the records.

Update Transaction ____________

Taxes

1) Enter when to update the Tax File (F0018). ’1’ = V.A.T. or Use Tax only; ’2’ = for all Tax Amounts; ’3’ = for all Tax Explanation Codes; ’ ’ = no update to Tax File (Default).

Update Tax File ____________

2) Adjust V.A.T. Account for Discount Taken. The Tax Rules file must be set to Calculate Tax on Gross Amount, including Discount and Calculate Discount on Gross Amount, including Tax. Tax explanation must be a ’V’.

’1’ = Update VAT only; ’2’ = ____________ Update VAT, Ext. Price and Taxable

3) Adjust V.A.T Account for Receipt Adjustments and Write Offs. Tax explanation must be a ’V’.

Posting to the General Ledger

4–55OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

’1’ = Update VAT only; ’2’ = ____________ Update VAT, Ext. Price and Taxable

Process

Enter a ’1’ if you wish to explode parent item time down to the assembly component level. Component billing rates will be used. (This applies to batch type ’T’ only.)

Explode parent item time. ____________

Reviewing the Item Ledger/Account Integrity Report

1���#���-����#���)���#������B>8$$$$C��������-#���<����0(�����#-�#��"#��

Before You Begin

� =�"+��#��#�����������#�����3���#"���� ��B8$0-4C������"�( �+ ����%��&�������:'������&�<� �6�"������"��#���&�(�����6���������!� ���

����-#���<����0(�����#�-�#��"#�����#� "#��"������"��.�#�����#���-#��<���������(�����#�<�����#�. ���-+�#�����#��"��#���#���#�. ��"�"���������#���� "������������#������#��

���� "���#��#���������������� "����#��#�"��#��������#������ "��������##���#�#� �+�������"+"���������#�#������������#����.�������*������������4��#���#�#� � "����������A����������#�"����#��������#"�����������.���������#�. ���������#���

-+������������"@���/���� ���#"��+����*������#���������"������#�"� �"���#����#"���B-7C������ �#"���B-�C����������#����#"���B-�C���"�#�#��������"@�����*�����.������#���������#���#�� ���*�����

See Also

� )� �� ����%��&���'�����:#�������&����� �6�"������"��#���&�(�����6��������!� ���+�����"#"��� �"�+���#"��

� ���� ���4���������� ���+������"�+���#"����.��#�����"@���/���� ��#"�

� "7137.2�&���'�����:#�������&����� �6�"��#���"�������!� ���+�������#��� �

Product Costing and Manufacturing Accounting

4–56 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Processing Options for Item Ledger/Account Integrity

Report Display

1. Enter the beginning Item Ledger Date.

Date – For G/L (and Voucher) ____________

2. Enter the ending Item Ledger Date. If it is left blank, the current date would be the default.

Date – For G/L (and Voucher) ____________

Reviewing Reports for Manufacturing Accounting

7���+��#�"���������#"������#��� ��������"������������#"�����#������"������A����"��#����#�#�����#����.�+��������������� ���#"��+�=�"�������������������#�����+#������� ���#"��+��=�"�����#����"+��#�����������+�#���/���� ���#"���

)��"��"������#�+������+��#�"���������#"������"#��+�#���+� ��"���#�*5

� )��"��"�����*�������#"�"#��.�������#

� )��"��"�����*�������#"�"#��.����"#

� )��"��"������"���"�����"����

� )��"��"���� ��������"����

� )��"��"����++"�"�������"����

� )��"��"���#�#� 0�-6������#�����"����

� )��"��"������� �#�����*������� ��#"��

� )��"��"�����*����������#���"����

� )��"��"���������#"���������B� ������*����C

� )��"��"�����������"�����"����

� )��"��"�����#�"� ��������"����

� )��"��"��� �.���#����"����

� )��"��"�����*����� �.���++"�"����

Posting to the General Ledger

4–57OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Work Order Activity b Amounts

1���#���7���+��#�"���(�����#"��������B> $$&C����������*�����(�#"�"#�E�(����#�

��"����#� "#�#�����������#��� ���������#�� ���������� �#��������#��+��*�������������#� "#�#�����#��+�#�����������#�+"#������#����#����#��+�#�������#�

See Also

� ".1018#2������������#�� ( �6�*�#������"��#���"�������!� ���+�������#��� �

Reviewing Work Order Activity by Units

1���#���7���+��#�"���(�����#"��������B> $$&C����������*�����(�#"�"#�E�9�"#�

��"����#� "#�#�����������#��� ���������#�� ���������� �#�����"#��+���*�����

See Also

� ".1018�2������������#�� ( �6�*��� ���"��#���"�������!� ���+�������#��� �

Reviewing Engineering Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#����"���"���=�"�����

��"����#� "#���*������#��"�#��������������#������#������#��"���"���"�����"������

See Also

� ".101.2���� ���� ���$� ����"��#���"�������!� ���+�������#���� �

Reviewing Planned Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�6 ������=�"�����

��"����#� "#�� ���*���������#��"�� ��������"���������#�"�#�������#�����#������������#��� �����������#��

Product Costing and Manufacturing Accounting

4–58 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

See Also

� ".10172�)������$� ����"��#���"�������!� ���+�������#���� �

Reviewing Efficiency Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�<�.���++"�"�����=�"�����

��"����#������ ������������#�� � �.������B� ���#���������#��3���#($C���3#������.��#�������#�������#�������#��������#��+���"�����.����*��������"#������.���

See Also

� ".10192���� � ���6�$� ����"��#���"�������!� ���+�������#���� �

Reviewing Total/WIP and Other Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#���#� 0�-6������#���=�"�����

��"����#�����#���#���������#�� ���������� �#��������#������#�#� �����#�����"�����.����#���������#�����"#���+��������*������

See Also

� ".101=2�;���:�&)������%���$� �����"��#���"�������!� ���+�������#��� �

Reviewing Completed Work Order Valuation

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#����� �#�������=� ��#"���

��"����#�����#���#���������#�� ������ �#����������##���"���.� ���������#�.����#���������#�����"#���+���������� �#�����*�������������� ���#"��+����*�"��6���������� �#"������������ ���#"��+�=�"����������������� �����.�������+��#������*����������������� �� �#��#���#�#� �+�������#�����+���#�.����*����������������#�#� ��+�������#�+��� ��+�#�����*����� "#����

See Also

� ".10112���������������������$��� ���"��#���"�������!� ���+������#���� �

Posting to the General Ledger

4–59OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Work Order Amount Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#����� �#�������=�"�����

��"����#�������#�" ��������#"�����#�������"����������#�+��������*�����

See Also

� ".10102������������$� �����*�#������"��#���"�������!� ���+�������#��� �

Reviewing Accounting Summary (Closed Work Orders)

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#���������+���#�.��������6������������+���#�.������

��������+���#�.������ "#����� �#�����*���������#��"������� �#����#����"����#� "#�#���#�#� �#����������#�#� ���#�� ���#�����#�����"����.�#�����#���#����(�#�� ���#������#�" ���.����#�"� �� �.���������������

�����#�����*��#���+� ��"����� �� �#"��5

� <�.�������"�� ��������#������+����� ���"��#���G������;���#"#"��#�. ��B1 $$��C�+��#�����*�����

� ����������#����#�������"�����#�B#���� C�"��#���G�������;���#"#"�#�. ���� #"� "���.��#������������#����#����+��#�����*����#��"��#����*����#��)�#��#�. ��B1 ����C�

� ����#�#� ���#�� ���#�"�#��������� �#�����#�" �+�� �.�������������#�"� �������"�� ��������#�

� ����#�#� �#��������#�"�#������.���+�"#������� �#������#�����*������ #"� "���.��#�������#�"#��H�+�@���#��������#�+���#�����#<�����#�. ��B18$�2C�

See Also

� ".17/12�#������ ������6�,������������������-�"��#���"�������!� ��+�������#���� �

Reviewing Purchase Price Variance

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�7�#�"� �6"���=�"�������6����7�#�"� �6"���=�"�����

����6������6"���=�"��������#� "#�#�����#�� ��"�����"��+�����"#����#��#�������"���#��#������#"��#���+��#���"#��������#�����"�����.�#�����#��

Product Costing and Manufacturing Accounting

4–60 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

#����-#�� �� "#��������#��+���"�����+�������"#�������#���#�#� ���#�.��"#��+��#�����#"�����#�

�����#����#"����#���"�+���#"���+���#���+� ��"���#�. �5

� �#��������#������+���#�����#�<�����#�. ��

� (�#�� ���#������+���#���6����������)���"���#�. ��B18 $�$C�

See Also

� ".17832�)���%���)� ���$� ����"��#���"�������!� ���+�������#���� �

Reviewing Material Usage Variances

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�7�#�"� �9����=�"�����E��#��������6����7�#�"� �9����=�"�����E�#������

����7�#�"� �9����=�"��������#� "#�#���#��������#��������*������#� "#�����#�����#�� ���#��������+��#�����#�"������������#����#�"�#���+� ��"���� ����#5

� ����#��������"#��D�"����������*����

� ������#�� ���"#��������

� ������"�����.�#�����#���#���"��.�#����"#�������#

�����#�����*��#���+� ��"����� �� �#"��5

� ����#��������"#����#�������#�D���#"#�����"+"������#�����*������#���D���#"#���+�#�����������#����"+"������#�����*����H���#� "#������#�����*�����"����� �#���B#�#��%%C��#������#� "#�#�����*����D���#"#������ �#����#���#����#����"�"�� �����#�D���#"#��������

� ������"����������#����"�#�����#�� ���"#��������#��"�"����.��#��#��������"#��������#��������"����������#�������"��������������� ����1���3��� ���������������� ����+�$��������� ��"��"��#��#��#�#��� ������D���#"#���������#����#���������#�����#�� �D���#"#��������#�����

See Also

� ".17892����� �������$� �����"��#���"�������!� ���+�������#���� �

Posting to the General Ledger

4–61OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Reviewing Labor Rate Variance

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�<�.��)�#��=�"�������6����<�.��)�#��=�"�����

����<�.��)�#��=�"��������#� "#�����#�����#������ �.���#�����������������#��-#���#�" � �.���#����"�����.�#�����#���#�������#"��#������#�����#�� ��#�������������� "#�#��������#�����+���"�����

�����#�����*��#���+� ��"����� �� �#"��5

� ����#�������#�������+���#�����*����#��)�#��#�. ��

� ����#���������������+���#�����*�����)��#"���#�. ��B1 $$�C�

� ������#�� ������#����#�����#�� �����+���#���G�������;���#"#"�#�. ���� #"� "���.��#���#�������#��

See Also

� ".178=12�'5���"���$� ����"��#���"�������!� ���+�������#���� �

Reviewing Work Order Labor Efficiency

1���#���7���+��#�"���(�����#"���)���#������B> $� C���������"��#�<�.���++"�"�������6����<�.���++"�"�����

������*�����<�.���++"�"��������#�"�����#�" ������ �"��+��"��#� �.��++"�"��������������� �#���+������*������-#� "#�#������������#�� ����������� �� �#��#�����#��+�#�����"�����.�#�����#����.�������#������ �.��#������� ��#���*�����+��#������#�.��#�#�����#����������+�#�#���"�#�������"�����#"���

�����#����#"����#���"�+���#"���+���#���+� ��"���#�. �5

� ������#�� ��� ������#����� ���+���#���G�������;���#"#"��#�. ��+�#�������#"����D������������� �����

� ����+�@���#�������������+���#�����*�����)��#"���#�. ��

� ����+�@���#������ �.���#�����+���#�����*����#��)�#��#�. �.�������#���#���������+��#�������#"����D������

See Also

� ".17802������������'5������ � ���6�"��#���"�������!� ���+�������#��� �

Product Costing and Manufacturing Accounting

4–62 OneWorld Xe (09/00)To access English documentation updates, see

https://knowledge.jdedwards.com/JDEContent/documentationcbt/overview/about_documentation_updates.pdf

Appendices

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)4–64

OneWorld Xe (09/00) A–1

Appendices

����������"���#��#���6����#���#"�������7���+��#�"���(�����#"�����"�����5

� (�����"3�(5��� �� �#"���"����#�)� ��

� (�����"3�:5�6������6"���=�"����

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)A–2

OneWorld Xe (09/00) A–3

Appendix A: Calculations in Cost Rollup

��"�#��"�����"���"�+���#"����.��#��������E��������#���������#��������#���"��#�����#�� ���������������� �� �#"����������������"���#���������+��#�"������#��#�������������"�����#"������"���

�����"�� �#����#�)� �����������/�#��"��#� �.�����������"��#�����"������.��#"���.�"������"@����������� �#"����"� ����������"�#��������������/�#���������#���#�"� �D���#"#"��.������#"��������G������D���#"#"������ �������#���#��#����"������"#��+�������

See Also

� ���� ����� ������"������#������#������"�� �#���� ��

� #�� �� ���$���������������� �������������������+��"�+���#"����.��#����#��������#�����"�����#����#���������#

Material Cost Components

A1 (Purchased Material Cost)

� -+�������#������#���#����"��#���6�������-#�������"�����#"������#���"�� �#����#�)� ����������#������������#��#���#���#����#��#"����#�����#�+���#�����#�<�����#�. ��

� -+����� �����#�������"�����#"���. ��*��#������������#����� ����#��������� �������#����#���������#�

A2 (Material Scrap)

� ������#���������#�"�����+��"#���#��#�������������#��+�������+"���"��#��"�." ��+���#�"� �

� ������#E��������#������+�������"�����������#�����������#������. ���

� ��������#���#�"� �������#�N�M��+�����+���." ��+���#�"� �3D���#"#���������#�"#���3�#���#�#� ���#��+�#�����������#�

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)A–4

Routing Cost Components

)��#"�����#���������#�B��#���������#�:������C�����.�����#� ������� ����#������#����"�� �#����#�)� ���������

B1 (Direct Labor)

� 6���#��"��#� �.����#�N�����+��"��#� �.���� �� �#"���+��� ����#"������#���"#��H���#"���

� ����#"����"��#� �.����#�N�BBB����#"����"��#� �.������0�����#"��#"���.�"C�3�����#"�������"@�C�0�B����#"������� �#"����"� ��M�0�$��CC3���*����#���"��#� �.���#��

B2 (Setup Labor)

� 6���#��#��� �.����#�N�����+�� ��#��� �.���� �� �#"���+��� ����#"������#���"#��H���#"���

� ����#"����#��� �.����#�N�B����#"����#��� �.������3���*����#��#��� �.���#�C�0�������#"�����#�D���#"#��B"+�#���������#"�����#�D���#"#�"���#�@��C�

B3 (Machine Run)

� 6���#�����"��������#�N�����+�����"�������� �� �#"���+��� ����#"������#���"#��H���#"���

� ����#"�������"��������#�N�BB����#"�������"����������0�����#"��#"���.�"C�0�B����#"������� �#"����"� ��0�$��CC�3���*����#������"������#��

B4 (Labor Efficiency)

� ��"���#���������#�"���������������#�����#��+�#��� �.���D�"��#������������"#����-+�����������#�#�������+��#�"������#��#�#�����"+���#�.����*����#���++"�"������#������������#������#���������#B:8C�+�� �.���++"�"������������������"�� �#����#�)� ����-�����"#"����"+#����++"�"�����+������*����#��"��D�� �#��@����#��������� �� �#"���"��+�����+��#��#���*����#���<�.���++"�"�����"��� ���� �� �#���+��"��#� �.������

� 6���#� �.���++"�"�������#�N�����+�� ��++"�"������� �� �#"���+��� ����#"������#���"#��H���#"���

� ����#"��� �.���++"�"�������#�N�����#"����"��#� �.������E�B����#"���"��#� �.������3�B��*����#���++"�"�����0�$��CC�3���*����#���"��# �.���#��

Appendix A: Calculations in Cost Rollup

OneWorld Xe (09/00) A–5

C1, C2 (Variable/Fixed Machine Overhead)

� �� �� �#����� ��"+�����������#�#���7���+��#�"������#��#�#�. ��B1 ��%C#��"�� ������"�. ������+"3�������"�����������"��#�����#��-��#�"�#�. ��������#�� ����#��"������#�������"��H�����������#������ �� �#��+�������� ����#�����#��"��#�����*����#��7�#��#�. ��B1 ���&C�����������#��+�����"��������#�

� 6���#���"�. �0+"3�������"�������������#�N�����+�� ���"�. �0+"3������"������������� �� �#"���+��#���"#��H���#"���

� ����#"�����"�. �0+"3�������"�������������#�.�������#�N�����"���������3�B��*����#����"�. �0+"3�������"����������������#�0�$��C�3��*����#������"�������#��

� ����#"�����"�. �0+"3�������"�������������#�.���#��N�����"���������3���*����#����"�. �0+"3�������"������������#��

C3, C4 (Variable/Fixed Labor Overhead)

����+� ��"����� �� �#"�������"� ��������#���-+�����"��"��#�������*����#�7�#��#��#���"�. �0+"3��� �.������������#���� ��.���� �� �#������������#�+� �.����#���� #"� ��#�����*����#�� �.���#��.��#��������#�0�$���#���.#�"�#��� �.�����������#���1���3��� �5

����#"�����"�. �� �.�����������#��N�B��*����#���"�. �� �.���������������#�0�$��C�3���*����#��"��#� �.���#�

� �� �� �#����� ��"+�����������#�#���7���+��#�"������#��#�#�. ��B1 ��%C#��"�� ������"�. ������+"3��� �.����������"��#�����#��-��#�"�#�. ��������#�� ����#��"������#��� �.������������#������ �� �#���+������� ����#�����#��"��#�����*����#��7�#��#�. ��B1 ���&C�����������#��+� �.����#��-�����"#"�������������#�#�������+��#�"�����#��#�#��+��#�� �.����������.����*����#���++"�"�����

� 6���#���"�. �0+"3��� �.������������#�N�����+�� ���"�. �0+"3��� �.����������� �� �#"���+��� �����#"������#���"#��H���#"���

� =�"�. �0+"3��� �.������������#�N��"��#� �.������������#�S��#�� �.������������#5

� �"��#� �.������������#�.���#�5

� �"#���#� �.���++"�"����5��"��#� �.������3���*����#���"�. �0+"3��� �.�����������#�

� �"#�� �.���++"�"����5�B�"��#� �.������S���*����#��++"�"����C�3���*����#����"�. �0+"3��� �.�����������#�

��*����#���++"�"�����N� �.������E�BB��*����#���++"�"���������#�0�$��C�3� �.�����C

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)A–6

� ��#��� �.������������#�.���#��N�B����#"����#��� �.������0������#"�����#�D���#"#�C�3���*����#����"�. �0+"3��� �.����������#���(�����#"�����#�D���#"#��"�+��#����"+�"#�"���#��D�� #��@���

Outside Operation Cost Components (Usually Dx)

� ����.����#��������� �������#����#���������#����#"�����+���#����#�<�����#�. ��B18$�2C��������������"�� �#����#�)� ���

� ����6������*��������������#��"#������.��+����#"������#"�����+� ��5

� 6���#L�633��6���#�N�#�������#�"#������.������33�N�#����� �E���.����#"����+�#�����#"�������#"��H�����#"���D���������.��

1���3��� ���+��"#��� �������#"�������#"����#�����#"���D���������.�� �����"������"#������.���+� L�6 ��

� -+�������#������#���#����"��#�����#"�������#"�������"�����#"�����#����"�� �#����#�)� ����������#������������#��#���#���#����#��#"����#�����#�+���#�����#�<�����#�. ���-+�#����� ���"�@���������� ������"�� ���3"#���"��#�����#���������#�#�. ���#����"�"�� ��� �����"��

� -+����� �����#�������"�����#"���. ��*��#������������#����� ����#��������� �������#����#���������#�

OneWorld Xe (09/00) B–1

Appendix B: Purchase Price Variance

1����������"#��������������"�����"�����B66=C��� #������#���#�������#��"++��+���#�����#�� ���������"����-+���������3#����#�����������"#����#���#�#� �#��������#��"��#��"++��+���#���($�B��#�"� C���#����"�"++������"�#�����#�"� �.�������#�

������������"�����������������#����#�������#��#���������#�����. �������#��"���#����"������#��������������������#�������#��#���"����#��������#��"#��#���#������"#�����#�+���#�����#�<�����#�. ��B18$�2C��(���"++������.�#�����#���#�����#�"����������+�66=�������#�"� �.������66=�"#����"++������.�#�����#���+�@���($���#�����#����������������#��7�#�"� .�������#�"�#����"++������.�#�����#���#�#� �#��������#�+���#�����#<�����#�. ������#���($���#����+� ��5

66=�N�($���#�'��������������"#���#

7�#�"� �.�������#�N�#�#� �#��������#�'�($���#

Example: Purchase Price Variance and Material Burden

(��� 5����� &���� ,17628-

(��������#�N�$8���

�#��������#�N�$&���

(��� (������� &���� ,19224;-

($���#�N�$ ���

K$���#�N� ���

MaterialInventory

Material Received(AP)

MaterialBurden

PPV

16.00

totalstandard

cost

12.00 3.00 1.00

PurchaseOrdercost

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)B–2

7�#�"� �"����#��#�����*������ "����#���"����#���������#�������#�#��#���-6�������#��"#��#���+� �� ������#��������#�+��#���"#���

MaterialInventory

WIP

16.00 16.00

(#���"��������������� �/���� ���#��� ���#���66=�#��#�����#��+�>������ �������#�

PPV COGS

1.00 1.00

((-�#�. ��B8 !C���#�#�����#�"� ���������

-+������������ #"� ����#��3#�������������#�#����#�#���"++���#�������#�+�������+�#�����������#���� ��������#���������� ������'�����������"��#��)����������!� ��

Index

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

OneWorld Xe (09/00)

Index

A

(�����#����.���8'�

(�����#�)��""���+�����'8�

(�����#"�����#�D���#"#����##"��������'!

(�����#"���+�������#� ��8'&

(�����#"����������B� ������*����C

���#��8'2%

(�����#"����������'�� ������*����

B) $8�$C��8'2%

(�����#�����������#����.���8'�

(�#�� ���#"��������"���� '

(��"#"��� ���#���-�+���#"���+�����'�

("��"����� ���#�������+"������#

��������#���'�&

����������##"��������#���������#

(��������#��� �� �#"��������+"��������

"#�B8�0(=C���'2

B

:�#��������#���#"���� '&�

:" ��+�7�#�"� �)��""���B6 ���C�� '2�� '%�

:" ��+���#�"� ����"��"���+�������#

��#"���� '2

:�"�����"#��8'%

:�E�����#����+"����� '!$

C

�����"���"#�����#� ��� �� '&

���#��+�������#��8'!

��0:��6����#�)��""���+���� '!%

��0:��6����#��� ��#"���+���� '�$

��E0.�E�����#

��#��3#��� '!&

��"��"��������#���#"���� '!&

�##"������� ���"���#�. ��� '��

��E0:�E6����#�6 ���"�����. ��)��""��

+���� '%�

���� �#�����*�����=� ��#"���B) $�$$C�

8'2�

���� �#"��

/���� ���#"���8' �

����"����8'�2

��������#����������"����8'�2

���+"�����"#��

/���� ���#"���8' $

#��������#"���� '&%

��"������8' &

��E�����#����+"����� '!$

��E6����#�6 ���"��0��#"�����. ��B6 8�8C�

'��

�������#�=� ��������"�����#"���� '2�

�������#�=� ���B) ��%�C�� '2!

����"�����#�� '2!

����"���+�@�����#�#��"�� �#�����#�

'2�

��#�������#"�������#���#��$'$&

��#�.��*�#���##"������������3��� ����'2

��#�.��*�#������+"��������� "#�B �0�:C�

�'8

��#���������#������+"��������� "#

B �0�(C���.��#�� '8

��#���������#0<�����-�#��"#��

����"�����#"���� '22

��#���������#0<�����-�#��"#��)���#

B) �28 (C�� '22

��#���������#������"�����#"���� '�!

��#���������#

�"��"����� ���#�������+"������'�&

�� �� �#"���"��� ����('

��+"����� '8

+�@������"��"���� '8!

��"��"���������""���� '�

9����+"��������� "#� �0�(���'

��#���������#�B6 ���&C���'�&�� '� �

'8!�� '��

��#���������#�)���#������"��

��#"���� '28

��#��3#��+����E0.�E�����#�� '!&

��#� ���

�����"���� '&

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

�##"��������'%

��#����������#�����"��"����$'$&

��#���#���

����"�����'$

�##"��������'$�

��#���#���������+"��������� "#

B8�0�7C���'2

��#�����#"���.��*�#������+"��������

"#�B �0�:C���'8

��#�)��""��������"�����#"�����'$&

��#�)��""���B68$�2C���'$

��#�)��""���+�����'$8�� '&�

��#�� ������ �� �#"����('

��#��"�� �#"��������"�����#"���� '$�

��#��"�� �#"���B) ��$�C�� '$&

��#��"�� �#"���)�+��������"�����#"���

'2�

��#��"�� �#"���)�+���B) ��2�C�� '2�

��#��"�� �#"������#�� '��

��#���:" ���#�" �+���� ' $

��#���." ��+���#�"� ����"��"���� '��

��#���:" ��+�7�#�"� �B6 ���&C�� '��

����"�����#"���� ' 2

��#���:" ��+�7�#�"� �)���#������"��

��#"���� '2�

��#���:" ��+�7�#�"� �)���#�B) �88�C�

'2$

��#���." ��+���#�"� ���##"��������#

.��*�#��������'2

��#�����������"��"���� '��

��#�����#"������"��"���� ' &

��#���)��#"�����#�" �+���� ' ��� '�&

��#���)��#"���-�D�"�������"�����#"���

'8�

��#���)��#"��06����B6 ����C�� ' &�

'��

��#���)��#"��06����-�D�"�������"��

��#"���� '��

��#"����3���#"��������"�����#"���

'$&

��#"����3���#"���B) ���$C�� '$8

��#"����3���#"������#�� '$8

��#

����"���� '2!

����"���+�@���#��"�� �#���� '2�

����#"���� '&�

���#"�����"�� �#���� ���� '$&

��������9���#"���+�@�����#

���#"���/���� ���#"���8'�!

���#"���/���� ���#"��+����"������8'8�

���#"���/���� ���#"��+����*�"������

������ �#"����8' �

���#"���"�� �#�����#�� '$

���#"���#�����#"����3���#"������#�� '$2

���� �#"����"� ���"�� �#���� ���� '$!

D

��"������"���"�������#���#��$'$&

��#�" ������������/���� ���#"���8'�%

�"� ���.�3�������1��

�"� ��������1��

E

�++"�"�����=�"�����B) $�$&C��8'2�

���"���"����$'$&

���"���"�����"������8'2!

���"���"���=�"�����B) $�$�(C��8'2!

��#��:" ��+�7�#�"� �-�+���#"���+���� '!�

'%

��#����#���������#�+�����'�!�� '�2

��#��-����"��#�+���� '!2

��#��6����-�+���#"���+���� '!8

��#��)��#"���-�+���#"���+���� '%

�)63����"�����#�������#���#"���� '&!

�3���#"�����������������+"��������

"#�B �0�7C���'2

F

1�#�6�#����������#�. �

����+��#�"���������#"����$'��

�����#���#"����$'�$

1��#�����#������#����E0.�E�����#

��#"���� '!&

1��

(�����#�)��""�����'8�

(��"#"��� ���#���-�+���#"�����'�

��0:��6����#�)��""���� '!%

��0:��6����#��� ��#"���� '�$

��E0:�E6����#�6 ���"�����. �

)��""���� '%�

��#�)��""�����'$8�� '&�

��#���:" ���#�" �� ' $

OneWorld Xe (09/00)

��#���)��#"�����#�" �� ' ��� '�&

��#��:" ��+�7�#�"� �-�+���#"���� '!�

'%

��#����#���������#���'�!�� '�2

��#��-����"��#�� '!2

��#��6����-�+���#"���� '!8

��#��)��#"���-�+���#"���� '%

>���� ������ �)��"����8'8!

-#���7�#��)��""�����'$�

-#��0:�����6 ��#�-�+����' &

����� ���#���8'8!

7���+��#�"������#��#�)��""�����'$!

7��"���./��#���'8

����#"���:��*�#�F����"������ ' ��

'�

6����#"�����#�-�D�"���8' !

��*����#��)�#��)��""�����' �

��*��"#��((-���'8�

��*��"#��:" ��+�7�#�"� �� '&�� '%

��*��"#����0:�E6����#�6 ���"��

��. ��� '%�

��*��"#����#�:��*�#�� ' �

��*��"#����#��� �� �#"���� '�&

��*��"#����#���������#���'�!�� '�8�

'�$

��*��"#����#���������#�� '8�

��*��"#����#���:" �� ' ��� '�8

��*��"#����#���)��#"��06����� ' !�

'��

��*��"#��>0<�)��"���'�.����

4��.���8'8&

��*��"#��-#���:�������'����' &

��*��"#��-#�����#���'$

��*��"#��-#���<������ '8%

��*��"#��-#���7�#��:������'$�

��*��"#��<���#"�����#�� '&$

��*��"#��7���+��#�"������#��#���'$!

��*��"#��)��#"�������#"���� '%�� '! �

'!2�� '!%

��*��"#����*����#����#�� '�&

��*��"#����*����#��)�#����' �

1�@�����#���������#����"��"���� '8!

1�@�����#

����"����#��"�� �#�����#�� '2�

����"�� �#���� '

G

>0<�.�#�������"��"����8'82

>0<�� ���������##"��������' 2

>0<�)��"���'�.�����4��.��B6 $�&-C�

8'82

>���� ������ �)��"���+����8'8!

>���� �<�����6�#�B)�%��$C��8'8%

>���� � �����#����#"����8'$8

>���"�

����+��#�"���������#"���"�#���#"��

�"#������� �������#"����8'�

����+��#�"���������#"�������

����"����$'��

����+��#�"���������#"����#��

����"����8'8

��#�������8'2�

����#�������8'2$

�����#���#"������������"����$'�$

#��������#�� '�

#���E#"��������8'��

H

G�������D���#"#"�������"����8'�

I

-����"��#��"�������#���#"���� '!8

-�#����������## ����#��8'2�

-�#����"�#�����+"����� '!$

-�"�����#�"� ��8'��

+��������8'��

-#���:�����B68$��&C���'!���' 2

-#�����#���������#�'�1�@���9���#�

B) �� 2C�� '8$

����"�����#"���� '88

-#�����#�<�����9���#�����#�� '8

-#�����#�<��� ������"��������"��

��#"���� '&8

-#�����#�<��� ������"���B)8$�$2C�� '&

-#�����#� ���

�����"���� '&

�##"��������'%

-#��� ��������"��"���� '8%

-#���<�����0�(�����#�-�#��"#�����#��8'22

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

-#���<�����-�D�"�������"�����#"���

'2$

-#���<�����-�D�"��B68$$$C�� '8%

-#���<����0(�����#�-�#��"#�������"��

��#"����8'2&

-#���<����0(�����#�-�#��"#��B)8$28 C�

8'22

-#���7�#��)��""���+�����'$�

-#��0:�����6 ��#�-�+��+�����' &

J

����� ���#"�

���� �#"����8' �

���#"������*�"������������� �#"���

8' �

��#�" �� '8�

��#�" ������������8'�%

+�����+"�����"#����8' $

+����E�����.� ������ '8�

+����"������8'8�

��#"����8'8%

����"@����8' �

#���E#"��������8'�!

��*�"��������8' �

����� ���#"��+��=�"����������"��

��#"����8'8$

����� ���#"��+���-6������� �#"���

����"�����#"����8' �

����� ���#��+����8'8!

K

F"#�"#���������#���#"���� '&�

L

<�.��)�#��=�"�����B) $8�!$C��8'&$

<�.��)�#��=�"��������#��8'&$

<��� ��+���#�" ��8'$�

M

7���+��#�"���((-������"�����#"���

�'82

7���+��#�"���((-�B68�%2�C���' %

7���+��#�"���������#"��

������#"����D��#"����8'&

������#"���+�������#� ��8'&

������#�����������#����.���8'�

.�"�����"#��8'%

���#��+�������#��8'!

+�#���#����������#�. ���$'��

����� � �����#����#"����8'$8

"�#���#"����"#������� �������#"��

����"���8'�

"�"�����#�"� �#������*������8'��

��� ��+���#�" ��8'$�

���������"����$'��

�./��#������."�"���������#��8'%��8'$�

� �#"���"���"#�������#���#"����$'$8

�##"��������' 2

�. �����������#"����8'$$

�#�������"�������"���8'8

�E������#��8'$

��"������8'$2

7���+��#�"������#��#���##"��������'$&

7���+��#�"������#��#�B6 ��%C���'$&

7���+��#�"������#��#�)��""���+���

�'$!

7���+��#�"������"���"�������#���#�

$'$&

7���+��#�"�������� ���#"��B) $���C�

8' �

7���+��#�"�����"������8'$2

7�#����#"��

��#���� ' !

"�� �#���� ���� '$�

7�#�"� �.������:'$

7�#�"� �6"���=�"��������#��8'2%

7�#�"� �9����=�"�����B) $8�&C��8'&�

7�#�"� �9����=�"��������#��8'&�

7��"���./��#�+�����'8

7��������"����$'�$

����+��#�"���������#"����$'��

�����#���#"����$'�$

7� #"'<��� ���#���:" �)���#������"��

��#"���� '2

7� #"E<��� ���#���:" ��+�7�#�"� ����#�

'2�

OneWorld Xe (09/00)

7� #"E<��� ���#���:" ��+�7�#�"� �)���#

B) �882(C�� '2�

N

4�#���������#�� '�

O

����#"���:��*�#�F����"�����+���� ' ��

'�

����#"��������"�� �#���� ���� '$!

��#"�������#"�������"�"����8'�8

P

6�#� "#�������#"����8'$%

6����#�." ��+���#�"� ����"��"��������#

��#"���� '%�

6 ������=�"�����B) $�$8C��8'2!

6 ������=�"��������#��8'2!

6�#�>���� �<����������"�����#"���

8'2

6�#�������8'2�

6�#"���������������8'2

6�#"�����"#�������8'$�

6�#"�����"#����#��8'2�

6�#"�������� ����#��8'2

6�#"�������+��#�"���/���� ���#"���8'8%

6�#"���#��#�������� � ������8'8%

6���#�������8'2�

6�������#���� '��

6��������+��#�"����#��������#"���

'!$

6��������"��"��������#���#"���� '!

6���"�����#"��

�������#�=� ���� '2�

��#���������#0<�����-�#��"#��� '22

��#���������#�� '�!

��#���������#�)���#�� '28

��#�)��""�����'$&

��#��"�� �#"���� '$�

��#��"�� �#"���)�+���� '2�

��#���:" ��+�7�#�"� �B6 ���&C�� ' 2

��#���:" ��+�7�#�"� �)���#�� '2�

��#���)��#"���-�D�"��� '8�

��#���)��#"��06����-�D�"��� '��

��#"����3���#"���� '$&

-#�����#���������#�'�1�@���9���#�

B) �� 2C�� '88

-#�����#�<��� ������"���� '&8

-#���<�����-�D�"��� '2$

-#���<����0(�����#�-�#��"#���8'2&

����� ���#"��+��=�"������8'8$

����� ���#"��+���-6������� �#"���

8' �

7���+��#�"���((-���'82

7� #"'<��� ���#���:" �)���#�� '2

6�#�>���� �<������8'2

6����#"�����#�-�D�"���8' %

��������#�7�"�#�������� '&

9���#���� ������6"��0��#�� '2%

6����#���#"��

.�#����� '&�

�)63����"�����#�� '&!

"����"��#�� '!8

*"#�"#���� '&�

���������"����$'�$

� �#"���"���"#������+��#�"��

������#"����$'$8

6����#���#"�����������+��#�"��

������#"���"�#���#"����$'$8

6����#"�����#�-�D�"�������"��

��#"����8' %

6����#"�����#�-�D�"��+����8' !

6����#"�����#����"��"����8' &

6���������-�

�����������"+"������������

6 ����B:" ��+�7�#�"� �)��""��C�� '2�

'%�

6 ���&�B��#���������#C���'�&�� '� �

'8!�� '��

6 �� �B��*��"#��)��#"���7�#�C�� '�

6 ��&�B��*����#��)��""��C���' $

6 ��%�B7���+��#�"������#��#C���'$&

6 ���&�B��#���:" ��+�7�#�"� C�� '��

6 �����B��#���)��#"��06���C�� ' &�

'��

6 $����B��*�����6����#"�����#C�

8' &

6 $�&-�B>0<�)��"���'�.�����4��.�C�

8'82

6 8�8�B��E6����#�6 ���"��0��#"��

��. �C�� '��

68�%2��B7���+��#�"���((-C���' %

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

68$�$�B-#���7�#�C���'$�

68$��&�B-#���:����C���'!���' 2

68$�2�B��#�)��""��C���'$

68$�2$�B��������#�7�"�#������C�� '&�

68$$$�B-#���<�����-�D�"�C�� '8%

)�%��$�B>���� �<�����6�#C��8'8%

) ���&6�B��#���������#�)���#C�� '28

) �88��B��#���:" ��+�7�#�"� �)���#C�

'2$

) �882(�B7� #"E<��� ���#���:" ��+

7�#�"� �)���#C�� '2�

) �28 (�B��#���������#0<����

-�#��"#��)���#C�� '22

) ���$�B��#"����3���#"��C�� '$8

) ��$��B��#��"�� �#"��C�� '$&

) �� 2�B-#�����#���������#�'�1�@��

9���#�C�� '8$

) ��2��B��#��"�� �#"���)�+��C�� '2�

) ��%��B�������#�=� ��C�� '2!

) $8�$�B(�����#"����������'�� ���

��*����C��8'2%

) $8�2�B6������6"���=�"����C��8'2%

) $8�&�B7�#�"� �9����=�"����C��8'&�

) $8�!$�B<�.��)�#��=�"����C��8'&$

) $8���B��*�����<�.���++"�"����C�

8'&$

) $����B7���+��#�"�������� ���#"�C�

8' �

) $��8�B=�"���������� ���#"�C��8'8�

) $�$$�B���� �#�����*����

=� ��#"��C��8'2�

) $�$�(�B��*�����(�#"�"#��'

(����#C��8'2!

) $�$�:�B��*�����(�#"�"#��'�9�"#C�

8'2!

) $�$ �B���"���"���=�"����C��8'2!

) $�$8�B6 ������=�"����C��8'2!

) $�$&�B�++"�"�����=�"����C��8'2�

) $�$!�B��#� 0�-6������#���=�"����C�

8'2�

) $�$��B��*�����=�"�����'

(����#C��8'2%

)8$28 �B-#���<����0(�����#�-�#��"#�C�

8'22

)8$�$2�B-#�����#�<��� ������"��C�

'&

)8�%2��B�� ������:�#���6"��0��#

9���#�C�� '2%

6�������"�����"������:'$

6������6"���=�"�����B) $8�2C��8'2%

6������6"���=�"��������#��8'2%

6����"�������#���#��$'$&

R

)�#�����*����#����' $

)���"�"�����#"�������#"����8'�8

)����"�����������D���#"#"���8'�

)���#

���� �#�����*�����=� ��#"����8'2�

��#���������#0<�����-�#��"#�

B) �28 (C�� '22

��#���������#�B) ���&6C�� '28

��#��"�� �#"���� '��

��#"����3���#"���� '$8

�++"�"�����=�"������8'2�

���"���"���=�"�����'�(����#��8'2!

-#�����#�<�����9���#��� '8

-#���<�����0�(�����#�-�#��"#���8'22

7�#�"� �9����=�"������8'&�

7� #"E<��� ���#���:" ��+�7�#�"� �� '2�

6 ������=�"������8'2!

�"�� ��<��� ���#���:" ��+�7�#�"� �� '2$

��#� 0�-6������#���=�"�����'

(����#��8'2�

��*�����(�#"�"#��'�(����#��8'2!

��*�����(�#"�"#��'�9�"#��8'2!

��*�����=�"�����'�(����#��8'2%

)��"��"�������#��������� '��

)��"��"�������#�����#"���� ' &

)��"��"���������""���"�� �#�����#

��������#�� '�

)��"��"�����#���#"��������#"���"�#��#"��

B((-C���' %

)��"��"���." ��+���#�"� �������#"����+�

�����#���#"���� '2

)��"��"������� �#�����*������� ��#"���

8'2�

)��"��"�����#���." ��+���#�"� �� '��

)��"��"�����#"���"�+���#"���� '8!

)��"��"����++"�"�������"������8'2�

)��"��"������"���"�����"������8'2!

)��"��"���+�@�����#���������#�� '8!

)��"��"���>0<�.�#����.����*������8'82

)��"��"���� ��������"������8'2!

OneWorld Xe (09/00)

)��"��"��������#���#"���+�

��E0.�E�����#�� '!&

)��"��"��������#���#"���+��"����"��#�

'!8

)��"��"��������#���#"���+�������#�."

�+���#�"� �� '%�

)��"��"��������#���#"���+��������

'!

)��"��"��������#���#"���"��." ��+

��#�"� �� '2

)��"��"��������#"�����#��8' &

)��"��"������#�+������+��#�"��

������#"����8'2&

)��"��"�����#"���+�������#���#"���� '�

)��"��"���#�����#���������#0<����

-�#��"#�����#�� '22

)��"��"���#�����#���������#����#�

'28

)��"��"���#�����#��"�� �#"������#�� '��

)��"��"���#���"#��� ������ '8%

)��"��"���#���-#���<����0(�����#

-�#��"#�����#��8'22

)��"��"���#���7� #"E<��� ���#���:" ��+

7�#�"� ����#�� '2�

)��"��"���#����"�� ��<��� ���#���:" ��+

7�#�"� ����#�� '2$

)��"��"���#�#� 0�-6������#�����"�����

8'2�

)��"��"�����*�������#"�"#��B�����#C�

8'2!

)��"��"�����*�������#"�"#��B��"#C��8'2!

)��"��"�����*����������#���"�����

8'2%

)��""������*������8'�$

)��#"������"��"���+����#"���� '�

S

�� ������#���#��$'$&

�� ������:�#���6"��0��#�9���#�

B)8�%2�C�� '2%

�� �������"��0��#������#"���� '2%

�� �0"����#�����#���#����� '&

����������"����8'�2

�����������1��

��##"������������#"�����#�D���#"#"����'!

��##"��������#�.��*�#������+����#���."

�+���#�"� ���3��� ����'2

��##"��������#���������#������(�����"3

(�'��� �� �#"���"����#�� ��T�("��"��

�� ���#�������+"������#���������#

��##"��������#�"�+���#"�����'!

��##"��������#���#����+��"#�����'$�

��##"��������#�D���#"#"��+��#��������#

������#"�����'!

��##"����������� � �����B>0<C�� �������

�' 2

��##"������"#�����#� ��� ���'%

��##"������"#�����#���'$�

��##"����������+��#�"���������#"�����' 2

��##"����������+��#�"������#��#���'$&

��##"������"�� �#����#��+������*����#��

�' $

��##"������#�������#������+��#�������

����("��"����� ���#�������+"������#

��������#

��##"������#�����E0.�E�����#�� ���"��

#�. ��� '��

�"�� �#�����#���������#����"��"������

��""���� '�

�"�� �#�����#������+�@���� '

�"�� �#����#��+������*����#����##"��

�����' $

�"�� �#���� ��

���#"���� '$&

���� �#"����"� ��� '$!

��#����#"���� '$�

����#"�������� '$!

��"#��+������������"���� '$�

�"�� ��<��� ���#���:" ��+�7�#�"� ����#�

'2$

��������#�7�"�#������������"��

��#"���� '&

��������#�7�"�#�������B68$�2$C�� '&�

�#��������#"��

���+"�����"#���� '&%

"�����������+��#�"���� '!$

����"���� '�

�#��������#�����".���� '�

��. �����������#"����8'$$

�������/���� ���#"���8' �

��������+���#�.���������#��8'2%

��#���"�#���#"����$'$$

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

T

��. ���$'$�

�E������#��8'$

��#� ���#�����".���+��#���������#"���

'�

��#� 0�-6������#�����"������8'2�

��#� 0�-6������#���=�"�����B) $�$!C�

8'2�

U

9��������9����+"��������� "#�

9�������#�����"#��8'�$

9���#���"��������+"�����������'

9�"#��+������������"����"�� �#��

� ���� '$�

9���#���� ������6"��0��#������"��

��#"���� '2%

9���#"���+�@�����#�� '8$

9���#"��������#���#�� '&�

9���#"���� �������"��0��#�� '2%

9����+"�������#���������#���"��"��

�� ���#����'�&

9����+"��������� "#���'

(��������#��� �� �#"���B8�0(=C���'2

��#�.��*�#�B �0�:C���'8

��#���������#�B �0�(C�� '8

��#���������#�B �0�(C���'

��#���#����B8�0�7C���'2

��#�����#"���.��*�#�B �0��C���'8

�3���#"������������B �0�7C���'2

�##"��������#�.��*�#�������3��� ��

�'2

V

=�"���������� ���#"��B) $��8C��8'8�

=�"����

���+"�����"#����8' &

���#"���/���� ���#"���8'8�

����+��#�"����8'$2

��������"����:'$

W

�"����������1��

��*����#��)�#��)��""���+�����' �

��*����#���#����' $

��*����#��)��""���B6 ��&C���' $

��*�"��������/���� ���#"���8' �

��*����

�##���"�����#� "#�������#"��

"�#��#"����8'$%

���� �#"����8'�2

��������#������8'�2

���#"����8'$%

���".����8'$%

"�"�����#�#���8'��

����"�����������D���#"#"���8'�

��""����8'�$

��*�����(�#"�"#��'�(����#�B) $�$�(C�

8'2!

��*�����(�#"�"#��'�9�"#�B) $�$�:C�

8'2!

��*�����<�.���++"�"�����B) $8��C��8'&$

��*�����<�.���++"�"��������#��8'&$

��*�����6����#"�����#�B6 $���C��8' &

��*������� ��#"�������� �#����8'2�

��*�����=�"�����'�(����#�B) $�$�C�

8'2%

��*�����=�"�����'�(����#����#�

8'2%

��*��"#��((-�+�����'8�

��*��"#��:" ��+�7�#�"� �+���� '&�� '%

��*��"#����0:�E6����#�6 ���"�����. �

+���� '%�

��*��"#����#�:��*�#�+���� ' �

��*��"#����#��� �� �#"���+���� '�&

��*��"#����#���������#�+�����'�!�

'�8�� '�$

��*��"#����#���������#�+���� '8�

��*��"#����#���:" �+���� ' ��� '�8

��*��"#����#���)��#"��06����+���

' !�� '��

��*��"#��>0<�)��"���'�.�����4��.�

+����8'8&

��*��"#��-#���:�����+�����'����' &

��*��"#��-#�����#�+�����'$

��*��"#��-#���<�����+���� '8%

��*��"#��-#���7�#��:����+�����'$�

��*��"#��<���#"�����#�+���� '&$

OneWorld Xe (09/00)

��*��"#��7���+��#�"������#��#�+���

�'$!

��*��"#��)��#"���7�#��B6 �� C�� '�

��*��"#��)��#"�������#"���+���� '%�

'! �� '!2�� '!%

��*��"#����*����#����#�+���� '�&

��*��"#����*����#��)�#��+�����' �

��*"����"#�����"#"��� ���#"���+��#���

'2!

��*"����"#�������"���#����#"���� '!$

��*"����"#��"�� �#�����#���������#�

'�

��*"����"#��#��������#"���"������

����+��#�"���� '!$

Product Costing and Manufacturing Accounting

OneWorld Xe (09/00)

top related