eltek flatpack 2 how to guide

Post on 26-Nov-2015

919 Views

Category:

Documents

95 Downloads

Preview:

Click to see full reader

TRANSCRIPT

ELTEK Flatpack 2 How to Guide

FLATPACK VERSION 1 FLATPACK VERSION 2

1 Eltek How to Guide 16082011EH

ELTEK RACK Maintenance Guide

1. Setup of Laptop 2. Connecting to the Controller Module 3. Log into the Controller Module 4. Main screen of Power System 5. Configuring the Power System 6. Configuring the Date and Time 7. Active alarm Group 8. Configuring Alarm Group 9. Current event log 10. Mains configuration 11. Rectifier configuration 12. Battery string configuration 13. Log out procedure 14. Disconnect from Controller unit

2 Eltek How to Guide 16082011EH

1. SETUP OF LAPTOP

3 Eltek How to Guide 16082011EH Return to Index

1. ENABLE USB PORT

RIGHT CLICK ON THE USB ICON THEN CHOOSE THE SILICON LABS ELTEK SMARTPACK.

4 Eltek How to Guide 16082011EH

1. Connection to Controller unit

To confirm connection is to right click on USB icon then connection should be highlighted and or displaying a tick on the left hand side of the description of the connection.

5 Eltek How to Guide 16082011EH

1. CHOOSE THE SOFTWARE

Power Suite 2.3 is the software to use for the ELTEK RACK. There are other software versions in circulation. Use 2.3 first, if not download the version being used on site by using the CD that is located on the shelf of the Eltek Rack.

6 Eltek How to Guide 16082011EH

2. Connect to the Controller unit

7 Eltek How to Guide 16082011EH Return to Index

2. Setup Settings

IMPORTANT: Click on the FIND COM PORT tab.

8 Eltek How to Guide 16082011EH

2. Setup Settings

Step 1: Click on the Pen Icon to setup Communication Port Number. Step 2: Write the same number port on the Communication Port Windows that you got in FIND COM PORT Number.

9 Eltek How to Guide 16082011EH

Step 1

Step 2

Will be the Same port number

2. Setup Settings

Log in password is 0003

10 Eltek How to Guide 16082011EH

Password is 003

3. Log into Controller

Click on the ‘Login’ tab in the ‘Access’ menu. This slide is of version 3.2

11 Eltek How to Guide 16082011EH Return to Index

3. Log into the Controller module

Enter the password ‘709’ in the Security tab and press OK. This slide is of version 3.2

12 Eltek How to Guide 16082011EH

4. Main screen of Power System

Displays the working system of the ELTEK rack

13 Eltek How to Guide 16082011EH Return to Index

5. Configuring the Power system

In the ‘Company’ tab ’enter your company name’ followed by – KORDIA. In the ‘Site’ tab, enter the Site JV number followed by the site name (e.g. JS9975 Menangle). Change the Install date and the Service date to the current date. When you have finished, click Apply then OK 14 Eltek How to Guide 16082011EH Return to Index

6. Configuring the Date & Time

Click on the ‘Adjust Date & Time’ tab in the Tools menu. This slide is of version 3.2 15 Eltek How to Guide 16082011EH Return to Index

6. Configuring the Date & Time

Then click on the ‘Get PC time & date’ button and click OK. This slide is of version 3.2

16 Eltek How to Guide 16082011EH

7. Active Alarm Group

In the Active Alarm Groups tab are the configured and current alarms

17 Eltek How to Guide 16082011EH Return to Index

8. Configuring Alarm Group

Click on ‘Outputs’ tab and tick the boxes as detailed below then tick Apply then OK tabs. Note: If RBS is installed and utilising -48V to +24V DC converter then the ‘CONVERTER FAIL’ Alarm must be assigned to ‘Alarm output1’ (DC Urgent) instead of ‘Alarm output2’. This slide is of version 3.2

18 Eltek How to Guide 16082011EH

9. Current Event Log

Click on the EVENT LOG tab, this will display the LATEST xx EVENTS tab, click on this tab which then displays all the recent events, alarms.

19 Eltek How to Guide 16082011EH Return to Index

10. Mains Configuration

Click on the Mains tab, this will then display the Mains Summary tab. The number of Phases that the Eltek rack has is configured here.

20 Eltek How to Guide 16082011EH Return to Index

11. Rectifier Configuration

Click on Rectifiers to see or display the Summary, Configuration or Efficiency Manager. The number of rectifiers in the Eltek rack is configured in the Configuration tab.

21 Eltek How to Guide 16082011EH Return to Index

12. Battery String Configuration

Click on the BATTERY tab, this will then display the Status, Configuration, Test, Boost, Temperature Monitor & Summary Configuration. The number of battery strings in the Eltek rack is configured in the Configuration tab.

22 Eltek How to Guide 16082011EH Return to Index

13. LOG OUT

Click on either the DISCONNECT tab or the LOG OUT tab

23 Eltek How to Guide 16082011EH Return to Index

14. Disconnect from Controller unit

Right click on the USB icon and choose the Silicon Labs Eltek Smartpack to disconnect from the unit. The description should either not be highlighted or no tick beside it. 24 Eltek How to Guide 16082011EH Return to Index

top related