PHLSTER Flatpack MALICE Clip Installation Instructions

You will need:PHLster Flatpack CarrierMALICE ClipPhilips Head ScrewdriverBlue Thread locker.

Step 1: Remove the tourniquet from the carrierto reveal the two Phillips head screws securing the included soft loops.

Step 2: Remove the screws, dismount the soft loops, and set the screws, screw-posts, and soft loops aside.

Step 3: Insert the screw posts through the Flatpack Carrier body and attach the MALICE clip by inserting the Phillips head screws through the holes in the MALICE clip. The clip can be mounted such that multiple orientationson the belt are possible. When the clip is configured to your preference, remove the screws and apply the same blue thread locker which you'd use for securing an optic to a rifle.