den islam intern report
Post on 05-Apr-2018
215 Views
Preview:
TRANSCRIPT
-
7/31/2019 Den Islam Intern Report
1/95
Practicum Report on A Study of HVAC System at BPL
International University of Business Agriculture and Technology
Practicum Report on
A study on HVAC system in Beximco
Pharmaceuticals Ltd.
Prepared By
Den IslamID # 09107034
Program: BSME
Submission Date: August, 10, 2012
The Coordinator
1
-
7/31/2019 Den Islam Intern Report
2/95
Practicum Report on A Study of HVAC System at BPLDepartment of Mechanical EngineeringIUBAT- International University of Business Agriculture and Technology4, Embankment Drive Road, Uttara Model Town,Sector 10, Bangladesh.
Subject: Request for the Report
Subject: Request for the Report.
Dear Sir,With due respect, I would like to submit this report as partial fulfillment of the BSME degree, the topic of A
study on HVAC system in Beximco Pharmaceuticals Ltd. It was superlative opportunity for me to work on
this topic to actualize my theoretical knowledge in the practical area and to have an enormous experience onthe Refrigeration System.Now I am looking forward for your kind assessment regarding this report.
I would be very kind of you, if you please take the trouble of going through the report and evaluate my
performance regarding this report.
Sincerely Yours,
..
Den Islam
ID # 09107034Program# BSME
2
-
7/31/2019 Den Islam Intern Report
3/95
Practicum Report on A Study of HVAC System at BPLThe CoordinatorDepartment of Mechanical EngineeringIUBAT- International University of Business Agriculture and Technology4, Embankment Drive Road, Uttara Model Town,Sector 10, Bangladesh.
Subject: Letter of Transmittal
Dear Sir,This is a great opportunity & immense for me to submit this report l on the topic of A study onHVACsystem in Beximco Pharmaceuticals Ltd. I have prepared this report as partial fulfillment of the BSMEdegree .I have tried my level best to prepare this report to the required standard. It was certainly a great opportunity for
me to work on this paper to actualize my academic knowledge in the practical arena.
I express my heart full gratitude to you to go through this report and make your valuable comments. It would
be very kind of you, if you please evaluate my performance regarding this report.
Thank youSincerely Yours,
..
Den Islam
ID # 09107034
Program# BSME
3
-
7/31/2019 Den Islam Intern Report
4/95
Practicum Report on A Study of HVAC System at BPL
Acknowledgement
This report which is entitled as A study on HVAC system in Beximco Pharmaceuticals Ltd. is talking
about the basic process Air-conditioning and Refrigeration System and application of this system for a
Pharmaceuticals Industry.
In the process of conducting this re[port , I would like to express my gratitude and respect to some respectable
person for their enormous help and giant support.
First of all I would like to thank to Mr. Yusuf Hossain, DGM, Engineering in Beximco Pharmaceuticals who
helped us a lot by his brilliant guidelines to make this report, without which it was not possible to conduct it.
I also thankful to Engr. Abdul Wadud, Course Coordinator, Department of Mechanical Engineering and al
the teachers of the Department of Mechanical engineering for providing their brilliant guidelines regarding this
subject matter.
Finally I wish to acknowledge those who directly or indirectly helped me in connection with this work.
12th April,2011
Uttara, DhakaAuthor
---------------------
Den Islam
ID # 09107034
Student Declaration
4
-
7/31/2019 Den Islam Intern Report
5/95
Practicum Report on A Study of HVAC System at BPL
I hereby declare that the presented report titled A study onHVAC system in Beximco Pharmaceuticals
Ltd. is uniquely prepared by me as a work report part on my Practicum. I did it with the help and assistance of
Engineering Department in Beximco Pharmaceuticals LTD.
I also confirm that, the report is only prepared for my academic requirement as a partial fulfillment of BSME
degree and not for any other purpose. It might not be used with the interest of opposite party of the
organization.
Author
..Den Islam
Program : BSME
Executive Summary
The term HVAC system is broadly used as Heating Ventilating & Air conditioning System. Basically it is
nothing but simply a conditioning system of air referring to any process or system that controls the
5
-
7/31/2019 Den Islam Intern Report
6/95
Practicum Report on A Study of HVAC System at BPLtemperature, humidity, cleanliness, and movement of indoor air. When the weather is hot, it cools the air
When the weather is cold, it warms the air. It also adds or removes moisture to and from the air as needed. By
controlling air movement, air conditioning is able to remove dust and dirt by bringing fresh air into a space and
pushing stale air out. An air conditioning system is any mechanism designed to stabilize and control the
condition of the air in a given space, most commonly in buildings, cars, and other forms of public and private
transportation.
The basic things forHVACsystem are to follow some criteria mentioning as bellow:
a) Temperature.
b) Moisture in the air (Humidity).
c) Ventilation system.
d) Filtration of Air born particles.
e) Air Movement in the occupied space.
A substance called refrigerant carries heat from one area to another. Simply compressor, condenser, expansion
valve and evaporator combined this system with a cyclic work. In BPL a Chiller is used for chilled water which
passes through the AHU (Air Handling Units), cooled air is supplied inside the factory building through duct.
Organization
Company Profile
.
.
6
-
7/31/2019 Den Islam Intern Report
7/95
Practicum Report on A Study of HVAC System at BPL
Name of the company : Beximco Pharmaceuticals LimitedYear of Establishment : 1976Country of Incorporation : BangladeshCommercial Production : 1980Status : Public Limited Company
Main Country of operation : BangladeshCorporate Headquarter &Registered Address : 17 Dhanmondi R/A, Road No. 2, Dhaka- 1205, BangladeshPhone : +880-2-8611891 (5 lines), Fax: +880-2-8613470,Email : info@bpl.netWebsite : www.beximcopharma.comOperational Headquarter : 19 Dhanmondi R/A, Road No. 7, Dhaka- 1205, BangladeshPhone : +880-2-8619151 (5 lines), +880-2-8619091 (5 lines)Fax : +880-2-8613888; Email: info@bpl.netWebsite : www.beximcopharma.comOverseas Offices & Associates : UK, USA, Pakistan, Myanmar, Singapore, Kenya, Yemen,
Nepal, Vietnam, Cambodia and Sri LankaAuthorized Capital (Taka) : 2,000 millionPaid-up Capital (Taka) : 1,040.97 millionNumber of Shareholders : Around 49,000Stock Exchange Listings : Dhaka and Chittagong Stock Exchanges of Bangladesh and AIM of
London Stock ExchangeNumber of Employees : 2236
VISION
We view business as a means to the material and social wellbeing of the investors, employees and the societyat large, leading to accretion of wealth through financial and moral gains as a part of the process of the human
civilization.
MISSION
Each of Our activities must benefit and add value to the common wealth of our society.We firmly believe that,in the final analysis we are accountable to each of the constituents with whom we interact, namely: Ouremployees, Our customers, Our business associates, our fellow citizens and Our shareholders.
7
-
7/31/2019 Den Islam Intern Report
8/95
Practicum Report on A Study of HVAC System at BPL
OBJECTIVE
Our objectives are to conduct transparent business operation based on market mechanism within the legal &social frame work with aims to attain the mission reflected by our vision.
Functions
Manufacturing and marketing of pharmaceutical Finished Formulation Products, Large Volume Parenteralsand Active Pharmaceutical Ingredients (APIs)
Beximco Pharmacy, are in the business which deals with human health and this makes us more responsible tokeep the highest standards of Our products.
Good products, however are only one side of its expression of commitment. They believe their responsibilitylies even more in ensuring that Our society gets benefited while we continue to grow.Beximco Pharmacy is acclaimed for outstanding product quality, world-class manufacturing facilities, productdevelopment capabilities and outstanding service.
8
-
7/31/2019 Den Islam Intern Report
9/95
Practicum Report on A Study of HVAC System at BPL
Generator
The Board of Directors:
A S F Rahman ,ChairmanSalman F Rahman ,Vice Chairman
Iqbal Ahmed ,DirectorMohammad Abul Qasem ,Director
Osman Kaiser Chowdhury ,DirectorDr. Abdul Alim Khan ,Director
Abu Bakar Siddiqur Rahman ,DirectorThe Executive Committee
Osman Kaiser Chowdhury, Member of the Board of DirectorsChowdhury Hafizur Rahman ,Member of the Board of DirectorsNazmul Hassan ,Chief Executive OfficerAli Nawaz ,Chief Financial Officer
9
-
7/31/2019 Den Islam Intern Report
10/95
Practicum Report on A Study of HVAC System at BPLAfsar Uddin Ahmed, Director, CommercialThe Management Committee
Nazmul Hassan Chief Executive OfficerOsman Kaiser Chowdhury Member of the Board of DirectorsAli Nawaz Chief Financial OfficerAfsar Uddin Ahmed Director, Commercial
Rabbur Reza Director, MarketingLutfur Rahman Director, WorksZakaria Seraj Chowdhury Director, SalesMohd. Tahir Siddique Executive Director, Quality AssuranceA R M Zahidur Rahman General Manager, ProductionJamal Ahmed Choudhury Senior Manager, Accounts & Finance
Present programs
Beximco Pharmaceuticals Ltd. is the leading pharmaceutical company of Bangladesh. Founded in 1976Beximco Pharmaceuticals Ltd. has been producing world class pharmaceutical products following currentGood Manufacturing Practice (GMP) as required by the World Health Organization (WHO) in order toimprove health, happiness and quality of life. Beximco Pharmaceuticals Ltd. has products of differen
therapeutic classes, each of which, occupies a prominent position in themarket and the heart of their customersand shareholders. Beximco PharmaceuticalsLtd. is always committed to improve the lives of people throughthe developmentand commercialization of high quality and cost-effective medicines. They strongly believethat quality makes the difference between life and death.After successful venturing in the local market, theyhave now taken the challenge to replicate the journey into the international arena. Now they are exporting toUK, USA, Pakistan, Myanmar, Singapore, Kenya, Yemen, Nepal, Vietnam, Cambodia and Sri Lanka
Future expansion programs
Increasing trends in product offerings
.reflects their relentless effort to provide better health care services to their valued customers
10
-
7/31/2019 Den Islam Intern Report
11/95
Practicum Report on A Study of HVAC System at BPL
R & DInventing tomorrow
B P L is a company that is continuously searching for the next treatment advancements. BPLs portfoliofeatures a range of high-quality, effective products. This product portfolio, combined with the steady stream ofpromising new products in development, is one of the many reasons BPL is among the nation's leading
pharmaceutical companies.
Future Focus
Strengthen its position in the present marketsWork is in progress to enter into regulated markets in six continents.
Research Methodology
Objective of the study
Primary objective:To fulfill the requirement of the Course ART-203Secondary Objectives:
To gain practical knowledge in HVAC system procedure and practices in industrial sector of Our country. To identify various problems in Air Coditioning System To recommend Our suggestions to overcome this problem.
Rationale of the study
11
-
7/31/2019 Den Islam Intern Report
12/95
Practicum Report on A Study of HVAC System at BPLFor BSME graduates both theory and knowledge of their application in professional area are important. Thisstudy gives us experiencing a good opportunity to bridge between theory and practices in industrial applicationat Bangladesh. We have learnt about HVAC system which we can learn in the real life path. This report helpsus to gain knowledge the application of HVAC system particularly in industrial application.
Data collection
Primary Data Sources:Personal discussion with the Engineers , Executives of Engineering department of Beximco Pharmacy.In collecting primary data we use questionnaire and verbal discussion. We concentrates only those people who
can give us information related to Our report.Secondary Sources: Annual Report. Brochures. Publications. Company Website.Data Analysis
The study has been conducted to get a picture about HVAC system , AC system and practical application ofthem Beximco Pharma. To get information we have prepared a questionnaire in such a way so thainterviewees can express their opinions, observation and knowledge on AC system, HVAC system in BeximcoPharma. Every question has some points. We put weight depending on responses. we focus both theoretical
and application of these.
12
-
7/31/2019 Den Islam Intern Report
13/95
Practicum Report on A Study of HVAC System at BPL
1. Job Analysis
Job analysis is used to:
1. Choose employees either from the ranks of your existing staff or from the recruitment of new staff.2. Set out the training requirements of a particular job.3. Provide information which will help in decision making about the type of equipment and materials to beemployed with the job.4. Identify and profile the experiences of employees in their work tasks (information which can be used asevidence for staffdevelopment and promotion).5. Identify areas of risk and danger at work.6. Help in setting rates of pay for job tasks.Job analysis can be carried out by direct observation of employees at work, by finding out information frominterviewing job holders, or by referring to documents such as training manuals. Information can be gleaneddirectly from the person carrying out a task and/or from their supervisory staff. Some large organizationsspecifically employ 'job analysts'. In most companies, however, job analysis is expected to be part of thegeneral skills of a training or personnel officer.2. Job Description
A job description will set out how a particular employee will fit into the organization. It will therefore need toset out:1. The title of the job2. To whom the employee is responsible3. A simple description of the role and duties of the employee within the organizationA job description could be used as a job indicator for applicants for a job. Alternatively, it could be used as aguideline for an employee and/or his or her line manager as to his or her role and responsibility within theorganization.3. Job specification
A job specification goes beyond a mere description - in addition, it highlights the mental and physical attributesrequired of the job holder. For example, a job specification for a trainee manager's post in a retail storeincluded the following:
13
http://www.thetimes100.co.uk/glossary--development-63.phphttp://www.thetimes100.co.uk/glossary--job-description-353.phphttp://www.thetimes100.co.uk/theory/theory--roles-people-organisations--203.phphttp://www.thetimes100.co.uk/glossary--line-manager-598.phphttp://www.thetimes100.co.uk/glossary--development-63.phphttp://www.thetimes100.co.uk/glossary--job-description-353.phphttp://www.thetimes100.co.uk/theory/theory--roles-people-organisations--203.phphttp://www.thetimes100.co.uk/glossary--line-manager-598.php -
7/31/2019 Den Islam Intern Report
14/95
Practicum Report on A Study of HVAC System at BPL
'Managers at all levels would be expected to show responsibility. The company is looking for people who aretough and talented. They should have a flair for business; know how to sell, and to work in a team.To do an effective HVAC system it will therefore take into consideration the following:1. Keeping the costs of selection down.2. Making sure that the skills and qualities being required has been identified.
3. Developing a process for identifying the economical solution.4. Making sure that the system selected, will fulfill the requirement of the industry
Limitation of the study
Unlike other research, this assignment is limited to the time constraints. Most of the organizations do
not agree to share their company strategy with such small days acquaintance.
Information regarding to pharmaceuticals is very confidential and because of that reason we focused on
secondary data for report preparation, though we have also used primary data which may no
pasteurized the actual one.
Although very high level officials tried to help us to prepare this report but their nature of job is such
that gives them little time to discuss.
14
http://www.thetimes100.co.uk/glossary--team-1790.phphttp://www.thetimes100.co.uk/glossary--team-1790.php -
7/31/2019 Den Islam Intern Report
15/95
Practicum Report on A Study of HVAC System at BPL
Questionnaire regarding Effective HVAC system:
The following information was collected through different Engineers and Staffs regarding this Job:1. What is an HVAC system?
Ans: Heating, ventilation and air conditioning--more commonly referred to as HVAC--is a common acronym
used to refer to all matters relating to heating and air conditioning. The air conditioning side of an HVACsystem uses the evaporation of refrigerant to provide cooling. Conversely, the heating side of an HVAC systemeither typically relies on a furnace or heat pump to provide heating through the same ventilation system. This isdone by warming heat exchanges that subsequently warm the air that passes through the HVAC system in ahome orbusiness. Heat pumps have been more popular in recent construction, but one will still see bothvariants and others used in new construction.
2. What are the major difference between a Heat Pump & Refrigerator?
Ans:
Heat Pump is the device where heat supplied to the engine is converted into useful work, where as
Refrigerator is the device reversed as Heat pump which either cool or maintain the temperature of a bodylower than the atmospheric temperature.3. What are the procedures of Air Refrigerator cycle ?
Ans:
Air Refrigerator work on Reversed Carnot cycle.4. Which one is recommended as Compression Cycle?
Ans:
Vapor Compression Refrigeration system is recommended for compression cycle.As it has less running cost over Air Refrigerant system, smaller in size, C.O.P is very high.5. What are the good refrigerant?
Ans:
Refrigerant having following properties are the good refrigerant:I) Low boiling point.
II) High critical Temperature
III) High Latent heat of vaporization.
IV) Non corrosive to metal.
V) Low cost.
VI) Non-toxic.
VII) Non flammable and non explosive.
6. Is What are the most common refrigerant?
Ans:
Ammonia, Carbon-di-oxide, Freon-12.
15
http://www.ehow.com/business/http://www.ehow.com/business/http://www.ehow.com/business/http://www.ehow.com/business/ -
7/31/2019 Den Islam Intern Report
16/95
Practicum Report on A Study of HVAC System at BPLAmong them Freon-12 is mostly useable refrigerant because of boiling point -30 C and operating pressure of itis 8 bar.7. What is Year Round Air conditioning System?
Ans:
If it consist both the winter and summer equipment in a system it is termed as year round AC system.
8. What is the Basic difference between HVAC and AC system ?Ans: HVAC recommends for air conditioning as well as human comfort , environment control and otherthings, where as AC system only refers the comfort air conditioning.9. What is central AC system?:
Ans: When the cooling load capacity is more than 25TR.10.When is De-Humidification required?
Ans: To control the Humidity up to a certain range De-humidifier is used.
Analysis and Findings
To make the HVAC system effective Electro osmosis has been proposed for dehumidification in airconditioning systems. This would allow the sensible and latent loads to be handled separately and may lead toimprovements in energy efficiency and comfort control. In electro osmosis, water is pumped through channelsor pores in solid material by the application of a voltage. A membrane composed of a desiccant material couldremove moisture from air to be conditioned. Then, Electro osmotic pumping could move the moisture acrossthe membrane and reject it on the other side.
16
-
7/31/2019 Den Islam Intern Report
17/95
Practicum Report on A Study of HVAC System at BPLText of Report:
HVAC System :
Introduction
The chief requirements of an air conditioning system are:
1. It should convey specified rates of air flow to prescribed locations
2. It should be economical in combined initial cost, fan operating cost and cost of building space
3. It should not transmit or generate objectionable noise
Generally at the time of designing an air conditioning system, the required airflow rates are known from loadcalculations. The location of fans and air outlets are fixed initially. The duct layout is then made taking intoaccount the space available and ease of construction. However, for a given system, only one set results in theoptimum design.
Definition:
Air conditioning is a term referring to any process or system that controls the temperature, humiditycleanliness, and movement of indoor air. When the weather is hot, it cools the air. When the weather is cold, it
warms the air. It also adds or removes moisture to and from the air as needed. By controlling air movement, airconditioning is able to remove dust and dirt by bringing fresh air into a space and pushing stale air out. An airconditioning system is any mechanism designed to stabilize and control the condition of the air in a givenspace, most commonly in buildings, cars, and other forms of public and private transportation.
HVAC System:
Heating, ventilation and air conditioning--more commonly referred to as HVAC--is a common acronym usedto refer to all matters relating to heating and air conditioning. The air conditioning side of an HVAC systemuses the evaporation of refrigerant to provide cooling. Conversely, the heating side of an HVAC system eithertypically relies on a furnace or heat pump to provide heating through the same ventilation system. This is done
by warming heat exchanges that subsequently warm the air that passes through the HVAC system in a home orbusiness. Heat pumps have been more popular in recent construction, but one will still see both variants andothers used in new construction.
Unless you live in an amazingly temperate climate, the HVAC system in your home uses more energy anddrains more energy dollars than any other system in your home. Typically, 44 percent of your utility bill goesfor heating and cooling.
Like many other appliances, HVAC systems have improved in energy efficiency in the last decade. As a resultyou can save money and increase your comfort by properly maintaining and upgrading your HVAC equipment.
Another development of the 1990s is the whole house approach to heating and cooling. Coupled with anenergy efficient furnace, heat pump or air-conditioner, the whole house approach can have a great impact onyour energy bills. By combining proper equipment maintenance and upgrades with appropriate insulationweatherization and thermostat settings - properly regulated with a programmable thermostat, of course - youmay be able to cut your energy bills in half.
17
http://www.wisegeek.com/what-is-humidification.htmhttp://www.ehow.com/business/http://www.ehow.com/business/http://www.wisegeek.com/what-is-humidification.htmhttp://www.ehow.com/business/ -
7/31/2019 Den Islam Intern Report
18/95
Practicum Report on A Study of HVAC System at BPLAll major appliances including gas furnaces, boilers, air conditioners and heat pumps sold in California meetthe Title-24 energy efficiency standards. If you are thinking about purchasing a new central furnace, check theENERGY STAR database, which uses information supplied by the California Energy Commission. Itdisplays information on most energy efficient appliances in a consumer-friendly, easy-to-use fashion.
Thermal Comfort:
Thermal Comfort means that a person wearing a normal amount of clothing fills neither too cold nor too warmIt is important for both well being and productivity. It can be achieved only when the air temperature, humidityand air movement are within the specified range.
Central Air Conditioning System: Central air conditioning units are usually matched with a gas or oilfurnace to provide heat through the same set of ducts.
There are also central HVAC units called heat pumps that combine both the heating and cooling functions. Ifyou heat your home with electricity, a heat pump system is the most efficient unit to use in moderate climates.It can provide up to three times more heating than the equivalent amount of electrical energy it consumes. A
heat pump can trim the amount of electricity you use for heating as much as 30 percent to 40 percent.
Even though air conditioners and heat pumps require the use of some different components, they both operateon the same basic principles.
Objectives Discuss the use of ventilated air for Air cooling of buildings and Air cooling of occupants
Make a comparison between natural ventilation and mechanical ventilation
List the general guidelines for natural ventilation Discuss briefly forced ventilation using electric fans
Discuss interior air movement using interior fans, unit ventilators, whole house fans and solar chimneys
Discuss the benefits of mechanical ventilation using fans
Background
Residential and commercial space-cooling demands are increasing steadily throughout the world as what oncewas considered a luxury is now seemingly a necessity. Air-conditioning manufacturers have played a big partin making units more affordable by increasing their efficiency and improving components and technologyThe competitiveness of the industry has increased with demand, and there are many companies providing air
conditioning units and systems.
Air conditioning systems vary considerably in size and derive their energy from many different sources.
Popularity of residential air conditioners has increased dramatically with the advent of central air, a strategy
that utilizes the ducting in a home for both heating and cooling. Commercial air conditioners, almos
mandatory in new construction, have changed a lot in the past few years as energy costs rise and power sources18
http://www.energystar.gov/products/index.htmlhttp://www.energystar.gov/products/index.html -
7/31/2019 Den Islam Intern Report
19/95
Practicum Report on A Study of HVAC System at BPLchange and improve. The use of natural gas-powered industrial chillers has grown considerably, and they are
used for commercial air conditioning in many application
Working Procedure:
Heat pumps and most central air conditioners are called "split systems" because there is an outdoor unit (calleda condenser) and an indoor unit (an evaporator coil). The job of the heat pump or air conditioner is to transportheat from one of these units to the other. In the summer, for example, the system extracts heat from indoor airand transfers it outside, leaving cooled indoor air to be recalculated through your ducts by a fan.
A substance called a refrigerant carries the heat from one area to another. Basically, here's how it works:
The compressor in your outdoor unit will change the gaseous refrigerant into a high temperature, high-pressuregas. As that gas flows through the outdoor coil, it loses heat. That makes the refrigerant condense into a hightemperature, high pressure liquid that flows through copper tubing into the evaporator coil located in your fancoil unit or attached to your furnace.
19
-
7/31/2019 Den Islam Intern Report
20/95
Practicum Report on A Study of HVAC System at BPLAt that point, the liquid refrigerant is allowed to expand, turning the liquid refrigerant into a low temperaturelow pressure gas. The gas then absorbs heat from the air circulating in your home's ductwork, leaving it full ofcooler air to be distributed throughout the house. Meanwhile, the low temperature, low pressure refrigerant gasreturns to the compressor to begin the cycle all over again.
While your air conditioner or heat pump cools the air, it also dehumidifies it. That's because warm air passing
over the indoor evaporator coil cannot hold as much moisture as it carried at a higher temperature, before itwas cooled. The extra moisture condenses on the outside of the coils and is carried away through a drain. Theprocess is similar to what happens on a hot, humid day, when condensed moisture beads up on the outside of aglass of cold lemonade.
The same process works in reverse in a heat pump during the winter. The heat pump takes heat out of theoutside air - or out of the ground, if you have ageothermal heat pump- and it moves that heat inside, where itis transferred from the evaporator coil to the air circulating through your home.
That's not a typographical error, by the way- the heat pump moves heat from outside to warm your home, evenon a cold day. That's because "cold" is a relative term. Air as cold as 30 degrees still contains a great deal of
heat - the temperature at which air no longer carries any heat is well below -200 degrees Fahrenheit. A heatpump's heat exchanger can squeeze heat out of cold air, then transfer that heat into your home with the help oa fan which circulates the warm air through your ducts.
Heat pumps are often installed with back-up electric resistance heat or a furnace to handle heating requirementswhen more heat is needed than the heat pump can efficiently extract from the air.
20
http://www.consumerenergycenter.org/home/heating_cooling/geothermal.htmlhttp://www.consumerenergycenter.org/home/heating_cooling/geothermal.htmlhttp://www.consumerenergycenter.org/home/heating_cooling/geothermal.htmlhttp://www.consumerenergycenter.org/home/heating_cooling/geothermal.html -
7/31/2019 Den Islam Intern Report
21/95
Practicum Report on A Study of HVAC System at BPL
Basic Working Procedure of Cooling cycle:
1. The compressor takes the low pressure refrigerant and compresses it, increasing both the temperature
and the pressure. The actual temperature and pressure depend on the refrigerant being used.
2. The condenser blows outside air over the refrigerant vapor, turning it into a liquid, typically about 25 F
above the outside air temperature. Hence the hot air blowing out of the condenser.
3. The expansion valve changes the refrigerant from a high pressure liquid to a low pressure liquid,
dramatically lowering the temperature as well.
21
http://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.php -
7/31/2019 Den Islam Intern Report
22/95
Practicum Report on A Study of HVAC System at BPL4. The evaporator allows the warm room air to blow over the coils with cold refrigerant liquid,
transferring heat to change the cold liquid to a warmer gas. Refrigerants are selected by their ability to
absorb significant amounts of heat as they change state from a liquid to a gas.
e. Classification
of Air-
conditioning
System
1. According tothe season of the
yeara)
Winter airconditioningsystem
b)
Summer air conditioning system, andc) Year-round air conditioning system, and
2. According to the arrangement of equipmenta) Unitary air conditioning system, andb) Central air conditioning system
f. Limitation
1. The central plant is located in unoccupied areas, hence facilitating operating and maintenance, noise
control and choice of suitable equipment.
2. No piping, electrical wiring and filters are located inside the conditioned space.
3. Seasonal changeover is simple and readily adaptable to climatic control.
4. Gives a wide choice of suability, flexibility, and humidity control under all operating conditions.
5. Heat recovery system may be readily incorporated.
22
-
7/31/2019 Den Islam Intern Report
23/95
Practicum Report on A Study of HVAC System at BPL
Scope of work:
The scope of work under the assignment shall include the following:1. Collect information on assessment methodology and implementation
2. Collect participants profile
3. Collect modules and handouts
4. Observe sample
5. Carry out any other necessary activities relating to the task
Methodology:
For the purpose of assessing quality and effective of the assignment the approach adopted will include thefollowings: Review and relevance of field work
Ensure appropriate survey materials
The methodology will be fully developed with availability of more information as well as theoretical
exploration.
23
-
7/31/2019 Den Islam Intern Report
24/95
Practicum Report on A Study of HVAC System at BPL
Fig: Indoor and outdoor unit.
Work Plan:
Course work:
Gathering knowledge from course work on different heat & mass related fields.Field work:
Applying the acquired knowledge through multiple surveys Refrigeration system.
Chillers:
The above systems are all considered Direct Expansion (DX) systems because the units provide for directexpansion of the refrigerant in the air cooling coils. Chillers, on the other hand, make cold water that getsdistributed by pipes to air cooling coils. Chiller systems also require boilers to make hot water for the heatingcycle. A two pipe system either cools or heats and a system changeover must occur to go from cooling toheating. In the cooling cycle, the one pipe supplies the cold water while the other pipe returns the warmedwater (warmed by passing through the cooling coils with air blowing over the coils). A four pipe system
24
http://upload.wikimedia.org/wikipedia/commons/f/f2/Air_conditioning_unit-en.svg -
7/31/2019 Den Islam Intern Report
25/95
Practicum Report on A Study of HVAC System at BPLdoesn't need a system changeover, as each cooling coil unit has both a hot water supply and return and a coldwater supply and return piped to it. The energy efficiency of these systems and the excellent control options arethe biggest benefits, while initial cost and maintenance complexity are the drawbacks.
Humidity :
Humidity is an important thing for HVAC system. Relative humidity should be as 50% -60% is preferable.
Ventilation:
Ventilation is the movement of air and its contained pollutants to outdoors and flow of fresh air. The flow offresh air dilutes the concentration of pollutant. It is ideal way of keeping indoor air cleaning.
Dehumidification:
It is the process of moister removal process from air.
Two type of its are :-
i) Absorption Type, ii) Refrigerant Type
Bibliography:
Internet.
Training of Beximco Pharmaceuticals Limited.
Own real working experiences.
www.beximcopharma.comwww.msencarta.comBeximco Pharmaceuticals Ltd. Annual Report 2006
Brochure of Beximco Pharmaceuticals Ltd.De Cenzo & Robbins, Human Resource Management, 8th Edition, John Wiley & Sons inc.Singapore,
25
http://www.beximcopharma.com/http://www.msencarta.com/http://www.beximcopharma.com/http://www.msencarta.com/ -
7/31/2019 Den Islam Intern Report
26/95
Practicum Report on A Study of HVAC System at BPL
Appendix
VAM Vapor absorption chiller VARS Vapor absorption refrigeration systemSVAS Simple vapor absorption systemPRV Pressure reducing valvePVAS Practical vapor absorption system
C.O.P Coefficient of performance
IVARS Ideal vapor absorption refrigeration system
DER Domestic Electrolux refrigerator
LBARS Lithium bromide absorption refrigeration systemVARM Vapor absorption refrigeration machine
MAC Modern absorption chiller
.C Degrees CelsiusKm Kilometer> Greater then< Less then% PercentMW Mega WattKWh Kilo Watt HourGWh Giga Watt Hour
Mt metric tons
26
-
7/31/2019 Den Islam Intern Report
27/95
Practicum Report on A Study of HVAC System at BPL
Chapter One
Introduction1.1 Origin of the report:
This report has been prepared as an integral part of the internship program for the Bachelor of Mechanical
Engineering Program at the Department of Mechanical Engineering (BSME), International University of
Business Agriculture and Technology. During internship at Beximco Pharmaceuticals LTD. I was there as an
In Plant Trainee and I decided to do my report on HVAC system. Our honorable Course Coordinator of
Mechanical Engineering Department provided his kind consent to academically supervise the internship
program.
1.2 Objectives
Introduction of HVAC system and its application.
Introduction of AHU( Air Handling Units).
Discuss the use of ventilated air for Air cooling of buildings and Air cooling of occupants
Make a comparison between natural ventilation and mechanical ventilation
Design HVAC for a small unit.
Broad Objectives: The broad objective of this study mainly understands HVAC system in Mechanica
Engineering and maintaining it properly.
Specific Objectives: In order to the broad objectives we have to find out the followingobjectives. They
are as follows:
Operation of HVAC system.
Operation of Chiller, Air Handling Unit.
Study about Air-conditioning System.
Maintenance Chiller, Air Handling Unit etc.
Study on Ducting system.27
-
7/31/2019 Den Islam Intern Report
28/95
Practicum Report on A Study of HVAC System at BPL
1.3 Scope
This report will cover the practical knowledge about Air-conditioning System, Chiller, Air Handling Unit
Ducting System, O & M Activities, Quality Management system and a broad knowledge of different kinds of
Mechanical maintenance. Managing the O & M activities of Utility to maintain its require standard and user
perception toward it is the main scope of discussion in this report. All the improved Process that can be used in
HVAC system for proper tracking improvement and decreasing extra cost require for operation of technical
activities are also discuss here.
1.4 Background
The heating, ventilation and air conditioning (HVAC) system of any building is like the respiratory system of a
human being. It controls the movement, quality and temperature of air to ventilate, warm and cool the
organism. Energy is consumed by the parts of the system that heat and cool the air and movement of air with
fans requires energy. Air or water is heated or cooled using direct contact with heat or refrigerants and pushed
through pathways (ducts or tubes), escaping through outlets or vents until it travels throughout the structure
The air or water then returns to its origin to be heated or cooled again. Well-engineered ventilation patterns aid
circulation, introduce fresh air and controls the buildup of carbon dioxide (a byproduct of human respiration),
carbon monoxide (from combustion sources) and miscellaneous toxic gases from building materials and
household activities. Well-designed HVAC systems, passive filters, insulation and gravity make the system
more effective and efficient. New conservation practices and systems using alternative energies are being
designed to improve efficiency.
Surprisingly, air conditioning and refrigeration are also based on the basic concepts of heat. Even though it all
means cooling and comfort to you, its still about heat. One of the most basic facts of heat is that it moves from
hot to cold. Just like if you were to dip a dry cloth into a cup of water, the water would move rapidly from the
cup into the cloth, heat moves from hot to cold.
28
http://www.ehow.com/travel/http://www.brighthub.com/guides/air-conditioning.aspxhttp://www.ehow.com/travel/http://www.brighthub.com/guides/air-conditioning.aspx -
7/31/2019 Den Islam Intern Report
29/95
Practicum Report on A Study of HVAC System at BPL
Air conditioning systems vary considerably in size and derive their energy from many different sources.
Popularity of residential air conditioners has increased dramatically with the advent of central air, a strategy
that utilizes the ducting in a home for both heating and cooling. Commercial air conditioners, almos
mandatory in new construction, have changed a lot in the past few years as energy costs rise and power sources
change and improve. The use of natural gas-powered industrial chillers has grown considerably, and they are
used for commercial air conditioning in many applications
BPL has started its Journey since 1976 and from than it is one of the most renowned Pharmaceuticals in our
country. Earlier it was very small in size but for time being it is now large in its size as well as introduces lot of
modern machineries for their production.
BPL uses following machineries for their HVAC system:
Chiller : 100 Ton & 60 Ton
Air Handling Unit : 20000 m3/hr
1.5 Methodology
A qualitative research method has been used to carry out this study of practicum in Beximco PharmacuticalLtd. They introduced a very modern technology in their plant. They are using 2 Nos Chiller of whose capacity
are 100 Ton & 60 Ton (Dunham Bush, Malaysia). This type of chiller has some system protection controls
will automatically act to insure system reliability like as : Low suction pressure, High discharge pressure
,Freeze protection, Low differential pressure, Low oil level, Compressor run error . Dunham-Bush water-cooled
screw chillers have best part-load performance characteristics in the industry when measured in accordance with ARI Standard
550/590-2003. In most cases, actual building system loads are significantly less than full load design conditions, therefore
chillers operate at part load most of the time. Dunham-Bush water-cooled screw chillers combine the efficient operation of
multiple compressors with controller control to yield the best total energy efficiency and significant operating saving under any
load.
When specifying air conditioning equipment, it is important to consider the system load characteristics for the
building application. In a typical city, the air conditioning load will vary according to changes in the ambient
29
-
7/31/2019 Den Islam Intern Report
30/95
Practicum Report on A Study of HVAC System at BPLtemperature. Weather data compiled over many years will predict the number of hours that equipment will
operate at various loads.
The information of this report has been collected from the following sources:
1. Operators Log Sheet.
2. Machine catalog
3. Plant Operation Manual
4. Plant Maintenance Manual
5. Check sheet of Machines.
6. Plant Management Manual
1.6 Limitations
This report has been prepared as a partial fulfillment of BSME degree during Internship at BPL about HVAC
system. An HVAC system provides adequate indoor air quality by: conditioning the air in the occupied space
of a building in order to provide for the comfort of its occupants; diluting and removing contaminants from
indoor air through ventilation; and providing proper buildingpressurization
I was monitored by some o expert Engineer of BPL who is doing there from long time. Actually I got a guide
line from them and did my study by myself. They have helped me but couldnt get me any scope for thinking
anything by myself. I have studied about Air-conditioning and Refrigeration but HVAC system was new one
for me. BPL is a big company and I didnt get enough scope for taking any decision regarding this matter.
Chapter Two30
http://www.upmc-biosecurity.org/website/special_topics/protecting_building_occupants/pressurization.htmlhttp://www.upmc-biosecurity.org/website/special_topics/protecting_building_occupants/pressurization.html -
7/31/2019 Den Islam Intern Report
31/95
Practicum Report on A Study of HVAC System at BPL
Organization of Beximco Pharmaceuticals Ltd.
Company Profile
Beximco Pharmaceuticals Ltd (BPL) is a leading manufacturer of pharmaceutical formulations and Active
Pharmaceutical Ingredients (APIs) in Bangladesh. The company is the largest exporter of pharmaceuticals in
the country and its state-of-the-art manufacturing facilities are certified by global regulatory bodies of
Australia, Gulf nations, Brazil, among others. The company is consistently building upon its portfolio and
currently producing more than 400 products in different dosage forms covering broader therapeutic categories
which include antibiotics, antihypertensives, antidiabetics, antireretrovirals, anti asthma inhalers etc,amongmany others.
With decades of contract manufacturing experience with global MNCs, skilled manpower and proven
formulation capabilities, the company has been building a visible and growing presence across the continents
offering high quality generics at the most affordable cost.
Ensuring access to quality medicines is the powerful aspiration that motivates more than 3000 employees of
the organization, and each of them is guided by the same moral and social responsibilities the company values
most.
31
-
7/31/2019 Den Islam Intern Report
32/95
Practicum Report on A Study of HVAC System at BPL
Key Company Information
Year of Establishment :: 1976
Country of Incorporation :: Bangladesh
Commercial Production:: 1980
Status :: Public Limited Company
Business Lines :: Manufacturing and marketing of pharmaceutical FinishedFormulation Products, Large Volume Parenterals and ActivePharmaceutical Ingredients (APIs)
Main Country of operation :: Bangladesh
Corporate Headquarter &Registered Address
::17 Dhanmondi R/A, Road No. 2, Dhaka- 1205, Bangladesh
Phone : +880-2-8611891 (5 lines)
Fax : +880-2-8613470Email : info@bpl.net
Operational Headquarter ::19 Dhanmondi R/A, Road No. 7, Dhaka- 1205, Bangladesh
Phone : +880-2-8619151 (5 lines), +880-2-8619091 (5 lines)
Fax : +880-2-8613888
Email : info@bpl.net
Website : www.beximcopharma.com
Overseas Offices &Associates
::Australia, Bhutan, Cambodia, Chile, Ghana, Hong Kong,Indonesia, Jordan, Kenya, Kuwait, Malaysia, Myanmar, Nepal,
Pakistan, Philippines,Saudi Arabia, Singapore, Sri Lanka, Vietnamand Yemen
Authorized Capital (Taka) :: 9,100 million
Paid-up Capital (Taka) :: 1,824 million
Number of Shareholders ::Around 68,000
Stock Exchange Listings:: Dhaka and Chittagong Stock Exchanges of Bangladesh and AIM
of London Stock Exchange
Number of Employees :: 2,511
TIDM: (Tradable InstrumentDisplay Mnemonic)
:: BXP
Date shares were admittedto trading
:: Dhaka Stock Exchange : 3 July, 1985Chittagong StockExchange
: 11June, 1995
AIM ( AlternativeInvestment Market)
:21October,2005
ISIN :: US0885792061
32
mailto:info@bpl.netmailto:info@bpl.nethttp://www.beximcopharma.com/mailto:info@bpl.netmailto:info@bpl.nethttp://www.beximcopharma.com/ -
7/31/2019 Den Islam Intern Report
33/95
Practicum Report on A Study of HVAC System at BPLNumber of Employees : 2236
Board Details
Ahmed Sohail Fasiur Rahman
Chairman
Ahmed Salman Fazlur Rahman
Vice Chairman
Ahsanul Karim
Director
Faheemul Huq
Director
Abu Bakar Siddiqur Rahman
Director
Dr. Abdul Alim Khan
Director
Dr. Farida Huq
Director
Osman Kaiser Chowdhury
Director
Mohammad Abul Qasem
Director
Iqbal Ahmed
Director
Nazmul Hassan
Managing Director
Corporate Governance & Committees
33
-
7/31/2019 Den Islam Intern Report
34/95
Practicum Report on A Study of HVAC System at BPL
The Company has a three-tier management structure, comprising the Board of Directors, the Executive Committee
and the Management Committee. There is also an Audit Committee, constituted in 2006.
The Board is the highest level of authority within the Company comprising mainly non-executive directors, none of
whom receive directors' remuneration from it. The Board meets with the Executive Committee, comprising six
executive directors, twice a year to conduct a full review of the Company's operations.
Executive Committee
The Executive Committee meets on a quarterly basis and its scope of work includes: business review; budget
approval; and senior management appraisal.
Executive committee comprises of five members : Mr. O.K. Chowdhury, Nazmul Hassan, Alli Nawaz and Afsar
Uddin Ahmed.
Mr. O.K. Chowdhury, who are members of the board, are also members of the Executive Committee.
Nazmul Hassan
Managing Director
Rabbur Reza
Chief Operating Officer
Ali Nawaz
Chief Financial Officer
Management Committee
The Management Committee comprises operational heads and representatives of the Board and Executive
Committee and is chaired by the Chief Executive Officer. The Management Committee meets on a monthly basis,
is responsible for implementing the decisions of the Executive Committee and supervising the day to day affairs of
the Company and reports to the Executive Committee at least on a quarterly basis
Mr. O.K. Chowdhury, Mr. N. Hassan, Mr. A.U. Ahmed and Mr. A. Nawaz, whose profiles have been outlined
previously, are also members of the Management Committee. Other members of the management committee are:
34
-
7/31/2019 Den Islam Intern Report
35/95
Practicum Report on A Study of HVAC System at BPLRabbur Reza
Chief Operating Officer
Lutfur Rahman
Director, Manufacturing
Md. Zakaria Seraj Chowdhury
Director, International Marketing
Abdur Rouf Mohammad Zahidur Rahman
Executive Director, Manufacturing
Mohammad Tahir Siddique
Executive Director, Quality Assurance
Shamim Momtaz
Executive Director, Manufacturing
Jamal Ahmed Choudhury
Executive Director, Accounts & Finance
Audit Committee
The Audit Committee consists of three non-executive directors. Mr. Mohammad Abul Qasem is currently the
chairman of the audit committee while Dr. Abdul Alim Khan and advocate Ahsanul Karim are the members.
The Committee assists the Board of Directors of the Company in ensuring that its financial statements reflect
true and fair view of its state of affairs and in ensuring a good monitoring and internal control systems within
the business. The Audit Committee shall be responsible to the Board of Directors
VISION
We view business as a means to the material and social wellbeing of the investors, employees and the society
at large, leading to accretion of wealth through financial and moral gains as a part of the process of the human
civilization.
MISSION
35
-
7/31/2019 Den Islam Intern Report
36/95
Practicum Report on A Study of HVAC System at BPLEach of Our activities must benefit and add value to the common wealth of our society. We firmly believe that,
in the final analysis we are accountable to each of the constituents with whom we interact, namely: Our
employees, Our customers, Our business associates, our fellow citizens and Our shareholders.
OBJECTIVE
Our objectives are to conduct transparent business operation based on market mechanism within the legal &
social frame work with aims to attain the mission reflected by our vision.
Functions
Manufacturing and marketing of pharmaceutical Finished Formulation Products, Large Volume Parenterals
and Active Pharmaceutical Ingredients (APIs)
Beximco Pharmacy, are in the business which deals with human health and this makes us more responsible to
keep the highest standards of Our products.
Good products, however are only one side of its expression of commitment. They believe their responsibility
lies even more in ensuring that Our society gets benefited while we continue to grow.
Beximco Pharmacy is acclaimed for outstanding product quality, world-class manufacturing facilities, product
development capabilities and outstanding service.
36
-
7/31/2019 Den Islam Intern Report
37/95
Practicum Report on A Study of HVAC System at BPL
Present programs
Beximco Pharmaceuticals Ltd. is the leading pharmaceutical company of Bangladesh. Founded in 1976
Beximco Pharmaceuticals Ltd. has been producing world class pharmaceutical products following current
Good Manufacturing Practice (GMP) as required by the World Health Organization (WHO) in order to
improve health, happiness and quality of life. Beximco Pharmaceuticals Ltd. has products of differen
therapeutic classes, each of which, occupies a prominent position in themarket and the heart of their customers
and shareholders. Beximco PharmaceuticalsLtd. is always committed to improve the lives of people through
the developmentand commercialization of high quality and cost-effective medicines. They strongly believe
that quality makes the difference between life and death.After successful venturing in the local market, they
37
-
7/31/2019 Den Islam Intern Report
38/95
Practicum Report on A Study of HVAC System at BPLhave now taken the challenge to replicate the journey into the international arena. Now they are exporting to
UK, USA, Pakistan, Myanmar, Singapore, Kenya, Yemen, Nepal, Vietnam, Cambodia and Sri Lanka
Strength:
Diversification
The strength of Beximco Pharmaceuticals Ltd. lies in its diversified products and dosage forms.BPL has been
producing solid products like tablets and capsules and liquid products like syrup, suspension and solution, as
well as semisolid products like cream and ointment. It is the pioneer company to manufacture and market
nasal sprays, inhalation aerosols and suppositories in Bangladesh. In 2001, Beximco Pharmaceuticals Ltd.
stepped into a new path--bringing Small Volume Parenteral (SVP) or injectable dosage form. Arixon is its firs
small volume injectable product It is a preparation of Ceftriaxone, which is considered as a breakthrough
antibiotic in the history of medicine, . In 2002, Arixon is predicted to be one of our leading brands interms ofsales revenue. The company has lot of diversified products like, Napa: Neoceptin R: Neofloxin: Tycil :
Aristovit M etc.
Achievement of National Export Trophy
First export market operation with finished pharmaceutical products1994-95 : Achievement of National Export
Trophy (Gold) as the first pharmaceutical company of the country.
R & D
B P L is a company that is continuously searching for the next treatment advancements. BPLs portfolio
features a range of high-quality, effective products. This product portfolio, combined with the steady stream of
promising new products in development, is one of the many reasons BPL is among the nation's leading
pharmaceutical companies.We have introduced 26 new products in 2001. Around 70 new products are in our
development pipeline. They will obviously enrich our portfolio toeloypment of the employees so that they can
cope with the rapidly changing business
environment. Innovation is a major priority that we want to promote. Accordingly, training programs are
regularly undertaken for the staff to seek opportunities for skills
improvement.
38
-
7/31/2019 Den Islam Intern Report
39/95
Practicum Report on A Study of HVAC System at BPLOpportunities:
BPL always tried to add new products of different therapeutic classes in its portfolio and these products are
highly appreciated by the health professionals. Most important of them are Triocim, Arixon, Prosan, Recox,
Atova etc. Introduction of these new products enriched its product portfolio and is contributing to enhance its
sales.Apart from all these, we have intensified and consolidated our marketing efforts in other overseas
markets, like Myanmar, Kenya, Yemen and Vietnam. To capitalize immense opportunities in these overseas
markets, we are bringing in more new and exciting brands in these markets. Last year, BPLdonated one
Medical Information K i o s k to the Myanmar Medical Association of Mandalay which gainedenormous
attention and acceptance in theminds of the medical community ofM y a n m a r. In Kenya, number of
salespeople has been increased to best exploititshuge market potentials. All these effortsare already bringing in
desired results.Entering into new horizons andestablishing new overseas markets willremain our top mostpriority in 2002 also.Russia, Ukraine, Sri Lanka, Cambodia,Nepal will be on the list. We are confidentthat
ourprocess of globalization willcontinue with a more and moreaccelerated speed in the coming days.
Technology
Keeping pace with the advanced world
Technology carries the promise of tomorrow. The benefits of technology belong to all of us benefits that create
new opportunities and open doors to a better life. For example, the new inhaler plant of BPL has been designed
in a way to ensure highest-possible quality at every stage of manufacturing and quality control. World-class
facilities are being employed in each and every step including mixing, filling, testing, labeling, batch printing
and other procedures to ensure manufacturing of world class products.
Threats:
BPL has a commitment to the society to supply world class Active Pharmaceutical Ingredients (APIs).
Therefore, BPL is not only engaged in formulations but also in fine chemicals business with a view to
supplying cost effective quality materials to other local companies as well as for captive consumption.
Beximco Pharmaceuticals Ltd. has been preparing itself for the post-WTO open market competition. It has all
39
-
7/31/2019 Den Islam Intern Report
40/95
Practicum Report on A Study of HVAC System at BPLthe courage to compete with world leaders in pharmaceuticals business when the tariff and non-tariff barriers
will be withdrawn the new USFDA standard plant is planned to be operational in early 2003. Once completed,
this will be one of the finest facilities to be available anywhere in the globe.
Debt Management:
Debt to total asset: It shows the extent to which the firm is using borrowed money. Here the ratio is increasing
year by year.
Time interest earned ratio: A coverage ratio computed by dividing earnings before interest and tax (EBIT) by
interest charges; measures the ability of the firm to meet its annual interest payment. From year 2003 to 2004
the ratio increases.
Profitability ratios:Profit margin on sales: Measures profitability with respect to sales generated; net income per taka of sales. Net
profit margin on sales shows a decreasing trend.
Liquidity Ratios:
Year 2000 2001 2002 2003 2004CurrentRatio 1.1440 1.1971 1.3136 1.5721 1.4895
QuickRatio 0.4135 0.4293 0.5756 0.7110 0.6489
Current Ratio: Current ratio measures the ability to meet current debt with current asset. Current ratio hasincreased from 2002 to 2003 but in 2004 it decrease.
Quick Ratio: Quick ratio measures the ability to meet current debt with most liquid current asset Quick ratiohas increased from 2002 to 2003.
Asset management ratio:
40
-
7/31/2019 Den Islam Intern Report
41/95
Practicum Report on A Study of HVAC System at BPLYear 2000 2001 2002 2003 2004
Inventory Turnover 0.3393 0.3511 2.2529 1.9094 1.7226Days sales
Outstanding 279.1104 299.1648 64.1867 82.3708 89.9030Fixed Asset
turnover 0.1114 0.0878 0.5248 0.3676 0.3946Total Asset turnover 0.0736 0.0631 0.3709 0.2720 0.2806
Inventory Turnover: Inventory turnover measure how many times the inventory has been turned over (sold)
during the year; provides insight into liquid of inventory and tendency to overstock. It increased from 2000 to
2001. But from 2002 it has declining trend.
Days sales outstanding: It slightly increase from 2000 to 2001, after that it decrease which indicates
satisfactory condition.
Future expansion programsIncreasing trends in product offerings
.reflects their relentless effort to provide better health care services to their valued customers
.
41
-
7/31/2019 Den Islam Intern Report
42/95
Practicum Report on A Study of HVAC System at BPL
Future Focus
Strengthen its position in the present marketsWork is in progress to enter into regulated markets in six continents.
42
-
7/31/2019 Den Islam Intern Report
43/95
Practicum Report on A Study of HVAC System at BPL
Research & Development: key to global competence
Switzerlands Ciba Specialty Chemicals has a proprietary research collaboration agreement with Beximco. In
formulation, the company focuses on developing new formulations predominantly through reverseengineering techniques- on simplifying manufacturing processes and improving cost efficiency. Its ability to
comply with strict WHO guidelines on the manufacture of anti-retroviral drugs distinguishes it from its
competitors.
In 2008 alone, it registered 45 new products and entered 7 new markets.
The R&D team has successfully formulated different high-tech formulations like multi-layer tablets, long
acting formulations and dispersible tablets and introduced anti-retroviral drugs and anti-cancer drugs inBangladesh.
Its long experience in MDI formulations helped it successfully develop a range of CFC-free HFA MDIs.
Qualified scientists with background in pharmaceutical sciences and related fields and a strong network with
global companies and the scientific community within the same fields of specilization are the hallmarks of its
R&D team.
43
-
7/31/2019 Den Islam Intern Report
44/95
Practicum Report on A Study of HVAC System at BPL
Chapter Three
Fundamentals of HVAC System
Fig: Sample HVAC system
44
http://www.upmc-biosecurity.org/website/special_topics/protecting_building_occupants/images/hvac_large_image.html -
7/31/2019 Den Islam Intern Report
45/95
Practicum Report on A Study of HVAC System at BPL3.1 Definition
An HVAC system provides adequate indoor air quality by: conditioning the air in the occupied space of a
building in order to provide for the comfort of its occupants; diluting and removing contaminants from indoor
air through ventilation; and providing proper buildingpressurization .
The heating, ventilation and air conditioning (HVAC) system of any building is like the respiratory system of a
human being. It controls the movement, quality and temperature of air to ventilate, warm and cool the
organism. Energy is consumed by the parts of the system that heat and cool the air and movement of air with
fans requires energy. Air or water is heated or cooled using direct contact with heat or refrigerants and pushed
through pathways (ducts or tubes), escaping through outlets or vents until it travels throughout the structure.
The air or water then returns to its origin to be heated or cooled again. Well-engineered ventilation patterns aid
circulation, introduce fresh air and controls the buildup of carbon dioxide (a byproduct of human respiration),
carbon monoxide (from combustion sources) and miscellaneous toxic gases from building materials and
household activities. Well-designed HVAC systems, passive filters, insulation and gravity make the system
more effective and efficient. New conservation practices and systems using alternative energies are being
designed to improve efficiency.
3.2 Heating:
There are different types of standard heating systems. Central heating is often used in cold climates to heat
private houses and public buildings. Such a system contains a boiler, furnace, or heat pump to heat watersteam, or air, all in a central location such as a furnace room in a home or a mechanical room in a largebuilding. The system also contains either ductwork, for forced air systems, or piping to distribute a heated fluidand radiators to transfer this heat to the air. The term radiator in this context is misleading since most heattransfer from the heat exchanger is by convection, not radiation. The radiators may be mounted on walls orburied in the floor to give under-floor heat.
In boiler fed or radiant heating systems, all but the simplest systems have a pump to circulate the water andensure an equal supply of heat to all the radiators. The heated water can also be fed through another(secondary) heat exchanger inside a storage cylinder to provide hot running water.
Forced air systems send heated air through ductwork. During warm weather the same ductwork can be used forair conditioning. The forced air can also be filtered or put through air cleaners.
45
http://www.upmc-biosecurity.org/website/special_topics/protecting_building_occupants/pressurization.htmlhttp://www.ehow.com/travel/http://www.upmc-biosecurity.org/website/special_topics/protecting_building_occupants/pressurization.htmlhttp://www.ehow.com/travel/ -
7/31/2019 Den Islam Intern Report
46/95
Practicum Report on A Study of HVAC System at BPLHeating can also be provided from electric, or resistance heating using a filament that becomes hot whenelectricity is caused to pass through it. This type of heat can be found in electric baseboard heaters, portableelectric heaters, and as backup or supplemental heating for heat pump (or reverse heating) system.
The heating elements (radiators or vents) should be located in the coldest part of the room, typically next to thewindows to minimize condensation and offset the convective air current formed in the room due to the air next
to the window becoming negatively buoyant due to the cold glass. Devices that direct vents away fromwindows to prevent "wasted" heat defeat this design intent. Cold air drafts can contribute significantly tosubjectively feeling colder than the average room temperature. Therefore, it is important to control the air leaksfrom outside in addition to proper design of the heating system.
The invention of central heating is often credited to the ancient Romans, who installed a system of air ductscalled "hypocaust" in the walls and floors of public baths and private villas.
3.3 Design consideration Of a HVAC system:
For a normal centralized HVAC system, it includes five heat exchange loops:
Indoor air loop (supply/return air fans, ducts, AHUs, VAV boxes)
Chilled water loop (AHUs, pipes, pumps, valves)
Refrigerant loop (chillers)
Condenser water loop (pumps, pipes, cooling towers)
Outdoor air loop (fans, cooling towers
3.4 Steps consideration Of a HVAC system:
Figure out the room loads and airflow for the property. It will need this information in order to figure
out the overall size of the system need.
Consider factors such as insulation, the number of windows and climate, and adjust your system size
estimate accordingly.
Take a look at how the property is laid out to get an idea of where registers are located, how long the
ducts already in place are, whether there are any obstructions like firewalls or if there are any rooms
that may need special considerations (e.g., a basement or attic).
Create a floor plan for the system that allows for easy access to filters, short duct distances, an airtight
air handler box and the use of minimal materials.
Size the duct system.
46
-
7/31/2019 Den Islam Intern Report
47/95
Practicum Report on A Study of HVAC System at BPL Size the HVAC equipment.
Itemize the materials needed for everything in the HVAC. Consider cost of the materials in addition to
their efficiency and safety.
Create a schematic of your design either by hand or by using design software.
Fig: Schematic Diagram of HVAC system
3.4 Classification of Air-conditioning System
47
-
7/31/2019 Den Islam Intern Report
48/95
Practicum Report on A Study of HVAC System at BPL1. According to the purpose
a) Comfort air conditioning system, and
b) Industrial Air Conditioning System
2. According to the season of the year
a) Winter air conditioning system
b) Summer air conditioning system, and
c) Year-round air conditioning system, and
3. According to the arrangement of equipment
a) Unitary air conditioning system, and
b) Central air conditioning system
3.5 Working Principle of Air-conditioning System
The compressor is the heart of the system; it keeps the refrigerant flowing through the system at specific rates
of flow, and at specific pressures It takes refrigerant vapor in from the low pressure side of the circuit, and
discharges it at a much higher pressure into the high side of the circuit. The rate of flow through the system
will depend on the size of the unit, and the operating pressures will depend on the refrigerant being used and
the desired evaporator temperature the red dots inside the piping represent discharge vapor.The solid red color
represents high pressure liquid refrigerant Most air cooled air conditioning and refrigeration systems are
designed so that the refrigerant will condense at a temperature about 25 to 3 degrees above outside ambient air
temperature.
48
-
7/31/2019 Den Islam Intern Report
49/95
Practicum Report on A Study of HVAC System at BPL
Fig 2: Air Conditioning Circuit and Cycle Diagram.
5. The compressor takes the low pressure refrigerant and compresses it, increasing both the temperature
and the pressure. The actual temperature and pressure depend on the refrigerant being used.
6. The condenser blows outside air over the refrigerant vapor, turning it into a liquid, typically about 25 Fabove the outside air temperature. Hence the hot air blowing out of the condenser.
7. The expansion valve changes the refrigerant from a high pressure liquid to a low pressure liquid,
dramatically lowering the temperature as well.
8. The evaporator allows the warm room air to blow over the coils with cold refrigerant liquid,
transferring heat to change the cold liquid to a warmer gas. Refrigerants are selected by their ability to
absorb significant amounts of heat as they change state from a liquid to a gas.
3.6 Refrigeration Compressor
The compressors are one of the most important parts of the refrigeration cycle. The compressor compresses the
refrigerant, which flows to the condenser, where it gets cooled. It then moves to the expansion valve, and the
evaporator and it is finally sucked by the compressor again. For the proper functioning of the refrigeration
cycle, the refrigerant must be compressed to the pressure corresponding to the saturation temperature higher
than the temperature of the naturally available air or water. It is the crucial function that is performed by the
compressor. Compression of the refrigerant to the suitable pressure ensures its proper condensation and
circulation throughout the cycle. The capacity of the refrigeration orair conditioning depends entirely on the
capacity of the compressor.
49
http://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.brighthub.com/guides/refrigeration.aspxhttp://www.brighthub.com/guides/refrigeration.aspxhttp://www.brighthub.com/guides/air-conditioning.aspxhttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.constructionknowledge.net/general_technical_knowledge/general_tech_basic_fluids.phphttp://www.brighthub.com/guides/refrigeration.aspxhttp://www.brighthub.com/guides/refrigeration.aspxhttp://www.brighthub.com/guides/air-conditioning.aspx -
7/31/2019 Den Islam Intern Report
50/95
Practicum Report on A Study of HVAC System at BPL3.7 Types of Refrigeration and Air Conditioning Compressors:
There are various types of compressors used in the refrigeration and air conditioning machines, these are:reciprocating, rotary, screw, centrifugal and scroll. All these have been described below briefly:
1) Reciprocating Compressors:
The reciprocating compressors are one of the most widely used types of the refrigerating compressors. Theyhave piston and cylinder arrangement like the automotive engine. The reciprocating motion of the piston due toexternal power compresses the refrigerant inside the cylinder. There are three types of reciprocatingcompressors: hermetically sealed semi-hermetically sealed and open type. The open of reciprocatingcompressors can be of single cylinder type or multi-cylinder type
Fig: Reciprocating Compressors
2) Screw Compressors:
The screw compressors comprise of the pair of meshing screws between which the refrigerant gets compressedThey can produce high pressure for small quantity of gas. They consume less power than the reciprocatingcompressors and are being used widely. It can be used with refrigerants like R12, R22, and others.
Fig: Screw Compressors
50
http://www.brighthub.com/engineering/mechanical/articles/51468.aspx?image=27622http://www.brighthub.com/engineering/mechanical/articles/51468.aspx?image=27621 -
7/31/2019 Den Islam Intern Report
51/95
Practicum Report on A Study of HVAC System at BPL
3) Rotary Compressors:
The rotary compressors have two rotating elements, like gears, between which the refrigerant is compressed.These compressors can pump the refrigerant to lower or moderate condensing pressures. Since they can handlesmall volume of the gas and produce lesser pressure, they are used in fewer applications.
Fig: Rotary Compressors
4) Centrifugal Compressor:
The centrifugal compressors comprise of the impeller or the blower that can handle large quantities of gas butat relatively lower condensing pressure. It is suitable for working with refrigerants like R-11, R-113 etc.
5) Scroll Compressors:
The scroll compressor comprises of two interleaved scrolls of which one is fixed and the other orbitseccentrically without rotating. During its motion small gaps are created between the scrolls where the
51
http://www.brighthub.com/engineering/mechanical/articles/51468.aspx?image=27624http://www.brighthub.com/engineering/mechanical/articles/51468.aspx?image=27623 -
7/31/2019 Den Islam Intern Report
52/95
Practicum Report on A Study of HVAC System at BPLrefrigerant gets compressed. The scrolls can have different shapes like involutes, Archimedean spiral or hybridcurve. In another arrangement both the scrolls may be rotating eccentrically to produce the compression.
Fig: Scroll Compressors
3.8 Differences between Refrigerating Compressors and other Compressors:
Though the refrigerant used in the refrigeration and the air conditioning systems is also a gas, the refrigeration
compressors are different from the compressors used for compressing other gases and air. Let us see these
differences:
1) Other gas and air compressors are independent entities: The compressors used for compressing the othergases and air are independent entities. This means they merely compress the gas or air and supply it for the
suitable applications. They have no direct connection with any other type of machine, though lots of machines
and equipments depend on the compressed air or gas. The refrigeration and the air conditioning compressors
are a part of the complete vapor compression cycle that comprises of additional components like the condenser
expansion valve and the evaporator. If the compressor is removed from this cycle, the refrigeration process will
cease to exist.
2) Main function of the compressor: The main function of the other compressors is to merely compress the
gas or air. The refrigerant compressor compresses the refrigerant to the pressure corresponding to the saturation
pressure higher than the temperature of the naturally available air or water. This enables the cooling of the
refrigerant in the condenser by the available atmospheric air or water.
52
http://www.brighthub.com/guides/air-conditioning.aspxhttp://www.brighthub.com/guides/air-conditioning.aspxhttp://www.brighthub.com/guides/valve.aspxhttp://www.brighthub.com/engineering/mechanical/articles/51468.aspx?image=27625http://www.brighthub.com/guides/air-conditioning.aspxhttp://www.brighthub.com/guides/air-conditioning.aspxhttp://www.brighthub.com/guides/valve.aspx -
7/31/2019 Den Islam Intern Report
53/95
Practicum Report on A Study of HVAC System at BPLFurther, the refrigerant compressor also circulates the refrigerant through the whole cycle. The refrigerant after
leaving the compressor is forced to the condenser, the expansion valve, and the evaporator and then it is sucked
by the compressor for compression and recirculation though the whole cycle.
3) Capacity Determination: The capacity of the refrigerating compressor determines the capacity of thewhole refrigerating or air conditioning plant. The capacity of the air or gas compressor doesn't determine the
capacity of the other plants. For instance, though the pneumatic tool depends on the compressed air for its
operation, it has its own capacity.
4) Relation to the other equipments: The refrigerating compressor is integral part of the cycle that includes
other components of the cycle like condenser, expansion valve, and the evaporator. The working and proper
functioning of each of these components depend on the working of other components. If the refrigeration
compressor breaks down the whole system will collapse. There is no such dependency in case of the other
compressors. If the air or gas compressor breaks down, the standby compressor can be started easily.
53
-
7/31/2019 Den Islam Intern Report
54/95
Practicum Report on A Study of HVAC System at BPL
Chapter Four
Ventilation System
54
-
7/31/2019 Den Islam Intern Report
55/95
Practicum Report on A Study of HVAC System at BPL4.1 Definition of Ventilation:
Ventilation is the process of bringing clean, fresh (outdoor) air into the house and removing stale indoor air
from the house. This is done by clean infiltration, natural ventilation, and mechanical ventilation. Insufficient
ventilation is one of the main causes of poor indoor air quality, because the lack of clean, outdoor air can resultin the build up of pollutants, irritants, and odors that may adversely affect the indoor environment. Without
ventilation, the pollutants and odors cannot be flushed out of the home.
4.2 Infiltration:
This is when outdoor air gets into the house through openings, cracks in the walls and floors, and around
windows and doors. This type of airflow may not provide enough ventilation, can make a house feel too hot or
too cold, and can increase energy bills. If air is being exhausted out of the home or being burned up bycombustion appliances (such as gas burning stoves and fireplaces) and the windows are closed, then infiltration
is the only way that makeup aircan get into the house. Often it gets into the house by being sucked in because
the house is undernegative pressure. There are two major problems with a home under negative pressure:
4.3 Makeup air is from soil gas: In this case, the makeup air is sucked into the house from the ground. If the
ground contains radon or is contaminated because of chemicals from an unknown hazardous waste site (like
Love Canal) or is near a leaking underground storage tank, these toxic contaminants can be drawn into the air
inside. Additional moisture can also be brought into the house this way, which can lead to the growth ofmold
and dust mites.
4.4 Back drafting: Since air will enter through the path of least resistance, it is possible for air to enter a home
by coming in through the chimney. This can cause combustion products such as deadly carbon monoxide to
build up inside the home.
4.5 Natural ventilation: This is when air moves into the house through open doors or windows. Though
natural ventilation can improve indoor air quality, it has several limitations. These are:
o It is an inefficient means to dilute contaminants in a home because the air is not uniformly distributed.
o The flow cannot be controlled.
55
http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=56&spaceid=1&subid=6http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=110&spaceid=1&subid=7http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=69&spaceid=1&subid=9http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=39&spaceid=1&subid=8http://www.aerias.org/DesktopDefault.aspx?tabindex=3&tabid=94#gloss-makeup_airhttp://www.aerias.org/DesktopDefault.aspx?tabindex=3&tabid=94#gloss-negative_pressurehttp://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=173http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=51&spaceid=1&subid=10http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=52&spaceid=1&subid=10http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=36&spaceid=1&subid=3http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=118&spaceid=1&subid=7http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=56&spaceid=1&subid=6http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=110&spaceid=1&subid=7http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=69&spaceid=1&subid=9http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=39&spaceid=1&subid=8http://www.aerias.org/DesktopDefault.aspx?tabindex=3&tabid=94#gloss-makeup_airhttp://www.aerias.org/DesktopDefault.aspx?tabindex=3&tabid=94#gloss-negative_pressurehttp://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=173http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=51&spaceid=1&subid=10http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=52&spaceid=1&subid=10http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=36&spaceid=1&subid=3http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=118&spaceid=1&subid=7 -
7/31/2019 Den Islam Intern Report
56/95
Practicum Report on A Study of HVAC System at BPLo Increased ventilation from outside can increasepollen and mold spore levels, if outdoor counts are
elevated, and moisture.
o If there is not much wind outside and not much temperature difference between indoors and outdoors, there
will not be enough ventilation in the home when windows are opened.
o If there are high winds outside or big temperature differences between indoors and outdoors, there will be
too much ventilation that can make humidity levels too low inside. This kind of ventilation in the winter
also wastes energy by heating outdoor air.
o If the outside air is humid, it can make the indoor air humid, which can create a favorable environment for
dust mites and mold.
4.6 Mechanical ventilation:Heating and air-conditioning systems with fans are used to bring fresh outdoor air
inside, circulate the air through the house, and exhaust stale indoor air outside. Individual fans can also help to
add or remove air. For example, properly installed and operated exhaust fans can remove stale, moist air from
bathrooms and kitchens. However, there needs to be a way that fresh air can be brought in to make up for the
air being vented out. Many homes actively exhaust air but rely on natural ventilation to bring air into the home.
A man who had severe asthma installed a powerful exhaust fan in his home to try to get rid of any moisture.
However, he did not include any makeup air for the air being exhausted and found that the moisture problem
did not improve and his asthma symptoms got worse. To find out why the exhaust fan was not getting rid of the
moisture, he brought in somebody to figure out what was wrong. They found that since there was no makeup
56
http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=141&spaceid=1&subid=5http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=130&spaceid=1&subid=8http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=141&spaceid=1&subid=5http://www.aerias.org/DesktopModules/ArticleDetail.aspx?articleId=130&spaceid=1&subid=8 -
7/31/2019 Den Islam Intern Report
57/95
Practicum Report on A Study of HVAC System at BPLair being provided, humid air from outside was being drawn in through the walls of the home. The fan had
been so powerful that this air went through the vinyl siding on the outside of his house, through polystyrene
insulation under the siding, through gaps in the plywood under the insulation that was contaminated with mold
from the moisture, through gaps in the sprayed-in cellulose wall insulation, and finally into the living space
through the electrical outlets!2
When there is little infiltration, natural ventilation, or mechanical ventilation, the air exchange rate (fresh air
coming in and stale air going out) is low and pollutant levels can increase. The American Society of Heating,
Refrigerating, and Air-Conditioning Engineers (ASHRAE) recommends a minimum ventilation rate of 0.35
ACH (air changes per hour) for new homes. This air exchange rate measures how many times all of the air
inside the house is replaced with fresh outside air.
If there are not enough air exchanges in the home, then pollutants can build up inside. This can make the
ind
top related