cross-reference guide · 20" wood bass drum hoop. 8 ply maple, black gloss bass drum hoops,...
Post on 13-May-2020
8 Views
Preview:
TRANSCRIPT
SNARE DRUMFLOOR TOM
BASS DRUMPEDAL
CYM
BAL
STAN
D
HI-H
AT S
TAND
BASS DRUM
RACK TOM
Gibraltar offers standard and deluxe options in replacement parts and performance upgrades - designed to fit all brands and drum set components.
This booklet breaks out the product selections for each individual drum set component shown below.
SNARE WIRES
BUTT PLATE
INTERNAL SHELL LUG SCREW
SWIVEL NUT
SNARE STRAPS
TENSION ROD WASHERS SC-11Metal Tension Rod Washers. (12pk)
SC-12Nylon Tension Rod Washers, white. (12pk)
SC-SSWABS Tension Rod Washers, black. (10pk)
TENSION RODS SC-4C1-5/8" (42mm) length (6pk)
SC-4J1-3/8" (35mm) Length, for piccolo snares. (6pk)
SWIVEL NUT SC-LNSmall Swivel Nuts fit most snare tension rods. (12pk)
BATTER SIDE HOOPS Steel Triple Flanged SC-1006TT 10" / 6 lug batter side hoop, 2.3mm
SC-1206TT 12" / 6 lug batter side hoop, 2.3mm
SC-1208TT 12" / 8 lug batter side hoop, 2.3mm
SC-1308BS 13" / 8 lug batter side hoop, 2.3mm
SC-1408BS 14" / 8 lug batter side hoop, 2.3mm
SC-1410BS 14" / 10 lug batter side hoop, 2.3mm
Die Cast SC-1308BSD13" / 8 lug batter side die cast hoop
SC-1408BSD14" / 8 lug batter side die cast hoop
SC-1410BSD14" / 10 lug batter side die cast hoop
Vintage Single Flanged SC-14VSFBH14" single flanged chopper-style batter side hoop
BATTER SIDE HOOPS, CONTINUEDDunnett Wood/Metal SC-1408MW14" / 8 lug batter side hoop with metal inner lining & outer wood shell
SC-1410MW14" / 10 lug batter side hoop with metal inner lining & outer wood shell
Wood SC-1408WTT14" / 8 lug batter side contoured wood hoop
SC-1410WTT14" / 10 lug batter side contoured wood hoop
SNARE SIDE HOOPS Steel Triple Flanged SC-1006SS10" / 6 lug snare side hoop, 2.3mm
SC-1206SS 12" / 6 lug snare side hoop, 2.3mm
SC-1208SS 12" / 8 lug snare side hoop, 2.3mm
SC-1308SS 13" / 8 lug snare side hoop, 2.3mm
SC-1408BS14" / 8 lug snare side hoop, 2.3mm
SC-1410BS 14" / 10 lug snare side hoop, 2.3mm
Die Cast SC-1308SSD13" / 8 lug snare side die cast hoop
SC-1408SSD14" / 8 lug snare side die cast hoop
SC-1410SSD14" / 10 lug snare side die cast hoop
Vintage Single Flanged SC-14VSFSH14" single flanged chopper-style snare side hoop
Wood SC-1408WSS14" / 8 lug snare side contoured wood hoop
SC-1410WSS14" / 10 lug snare side contoured wood hoop
BATTER SIDE HOOPTENSION ROD
THROW OFFTENSION ROD WASHER
SNARE SIDE HOOP
SNARE DRUMPARTS
SNARE WIRES
BUTT PLATE
INTERNAL SHELL LUG SCREW
SWIVEL NUT
SNARE STRAPS
INTERNAL SHELL LUG SCREWS SC-ILSReplacement screws and washers for lugs. (10pk)
THROW OFFS DUNNETT THROW OFFS SC-GR-RTO-CDunnett R4 throw off with 360 degree rotating base. Adjustable hole spacing of 5/8" to 1-1/4"
SC-GR-4L-CDunnett R4L throw off. Fits beaded shell including Ludwig models. Adjustable hole spacing
SC-GR-7-C Dunnett R7 throw off. Swivel lever throw. Adjustable hole spacing of 5/8" to 1-1/4"
SC-GW845 Dunnett GW845 throw off. George Way 845 "beer tap" style throw with quick snare release for rapid head changes
SC-DSLTODeluxe Classic throw off. Mount hole spacing 2-3/4"
SC-DSTODeluxe Modern throw off. Mount hole spacing of 2-3/4"
SC-STODeluxe throw off with quick release mechanism. Mount hole spacing of 1-1/2"
SC-DPTODeluxe Classic Piccolo throw off. Cast metal classic styled with mount hole spacing of 5/8"
SC-PTOPiccolo throw off. Mount hole spacing of 7/8"
SC-GVSTOVintage Style throw off. Upgrade replacement for classic 3-point model
BUTT PLATES SC-SSBEStandard Butt Plate. Standard key tension butt plate with mount hole spacing of 2-3/4"
SC-SBEDeluxe Butt Plate. Butt Plate assembly with deep channel and hight tension drum key bolts. Mount hole spacing of 1-3/4"
SC-DSLBEDUNNETT Butt Plate. Low profile, die-cast butt end with mount hole spacing of 1". Match with R4 or R7 throw offs
SC-GVSBEVintage Style Butt Plate. Vintage Slingerland style butt plate. Match with SC-GVSTO vintage throw off
SNARE WIRES SC-016A16-strand steel snare wire. Fits 10" snare
SC-216A16-strand steel snare wire. Fits 12" snare
SC-131616-strand steel snare wire. Fits 13" snare
SC-320A12-strand steel snare wire. Fits 13" snare
SC-1320S20-strand stainless steel snare wire. Fits 13" snare
SC-1420S20-strand stainless steel snare wire. Fits 14" snare
SC-445916-strand steel snare wire. Fits 14" snare
SC-446720-strand steel snare wire. Fits 14" snare
SC-4467L20-strand steel wire. 16" extended fits 14" FFS style snare
SC-4467VB 20-strand vintage brass snare wire. Fits 14" snare, comes with cord
SC-363E 20-strand steel snare wire SS style. Fits 14" snareSC-4471 42-strand steel snare wire. Fits 14" snare
SNARE STRAPS / CORDS SC-SSCMetal snare cord. High test metal braided cord. (4pk)
SC-VSCVintage nylon snare cord. (6pk)
SC-SCNylon snare cord. Tight weave w/ dbl laminated ends. (6pk)
SC-NSCNylon snare strip. Synthetic alternative to card. (4pk)
BATTER SIDE HOOPTENSION ROD
THROW OFFTENSION ROD WASHER
SNARE SIDE HOOP
SNARE DRUMPARTS
TENSION ROD WASHERS SC-11Metal Tension Rod Washers. (12pk)
SC-12Nylon Tension Rod Washers, white. (12pk)
SC-SSWABS Tension Rod Washers, black, (10pk)
TENSION RODS SC-4B2" (52mm) length. (6pk)
SC-4E2-3/8" (58mm) length. (6pk)
SWIVEL NUTS SC-LNSmall Swivel nuts fit most rack tom tension rods. (12pk)
INTERNAL LUG SHELL SCREWS SC-ILSReplacement screws and washers for lugs. (10pk)
FLOOR TOM LEGSSC-TL1A9.5mm diameter floor tom legs (3pk)
SC-TL2A10.5mm diameter floor tom legs (3pk)
SC-TL3A12.7mm diameter floor tom legs (3pk)
SC-GDFTL105Dunnett floor tom legs. 10.5mm, adjustable isolation tips. 26" (3pk)
SC-GDFTL127Dunnett floor tom legs. 12.7mm, adjustable isolation tips. 26" (3pk)
FLOOR TOM RUBBER FEET SC-RTSFloor tom small rubber feet. Fits 9.5mm floor tom legs (3pk)
SC-RTLFloor tom large rubber feet. Fits 12.7mm floor tom legs (3pk)
SC-FFTFloating floor tom feet. Fits 10.5mm floor tom legs. Hollow tip allows each foot to float, increasing vibration & resonance (3pk)
FLOOR TOM MOUNT BRACKETS SC-STL2Key adjust tom / floor tom mount bracket. Fits 9.5mm to 12.7mm floor tom leg. 2" mount hole spacing. Includes memory lock
SC-STL3Wing adjust tom / floor tom mount bracket. Fits 9.5mm to 12.7mm floor tom leg. 2" mount hole spacing. Includes memory lock
SC-STL4Hinged tom / floor tom mount bracket. Fits 9.5mm to 12.7mm floor tom leg. 2" mount hole spacing. Includes memory lock
SC-TL2Floor tom leg bracket fits 9.5mm to 12.7mm floor tom leg.
STEEL TOM HOOPS SC-1406TT14" / 6 lug tom tom hoop. 2.3mm steel triple flanged
SC-1408BS14" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1508TT15" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1608TT16" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1808TT18" / 8 lug tom tom hoop. 2.3mm steel triple flanged
FLOOR TOMPARTS
STEEL TOM HOOP
INTERNAL SHELL LUG SCREW
SWIVEL NUT
TENSION ROD
TENSION ROD WASHER
STEEL TOM HOOPFLOOR TOM LEGS
FLOOR TOMRUBBER FEET
FLOOR TOMMOUNT
BRACKET
TENSION ROD WASHERS SC-11Metal Tension Rod Washers. (12pk)
SC-12Nylon Tension Rod Washers, white. (12pk)
SC-SSWABS Tension Rod Washers, black, (10pk)
TENSION RODS SC-4C1-5/8" (42mm) length. For medium toms. (6pk)
SC-4J1-3/8" (35mm) length. For small toms. (6pk)
SC-4B2" (52mm) length. For large toms. (6pk)
SWIVEL NUTS SC-LNSmall Swivel nuts fit most rack tom tension rods. (12pk)
INTERNAL LUG SHELL SCREWS SC-ILSReplacement screws and washers for lugs. (10pk)
STEEL TOM HOOPS SC-0804TT8" / 4 lug tom tom hoop. 2.3mm steel triple flanged
SC-0805TT8" / 5 lug tom tom hoop. 2.3mm steel triple flanged
SC-1005TT10" / 5 lug tom tom hoop. 2.3mm steel triple flanged
SC-1006TT10" / 6 lug tom tom hoop. 2.3mm steel triple flanged
SC-1205TT12" / 5 lug tom tom hoop. 2.3mm steel triple flanged
STEEL TOM HOOPS , CONTINUEDSC-1206TT12" / 6 lug tom tom hoop. 2.3mm steel triple flanged
SC-1208TT12" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1306TT13" / 6 lug tom tom hoop. 2.3mm steel triple flanged
SC-1406TT14" / 6 lug tom tom hoop. 2.3mm steel triple flanged
SC-1408BS14" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1508TT15" / 8 lug tom tom hoop. 2.3mm steel triple flanged
SC-1608TT16" / 8 lug tom tom hoop. 2.3mm steel triple flanged
TOM MOUNT BRACKETS SC-STL2 Key adjust tom / floor tom mount bracket. Fits 9.5mm to 12.7mm L rod. 2" mount hole spacing. Includes memory lock
SC-STL3Wing adjust tom / floor tom mount bracket. Fits 9.5mm to 12.7mm L rod. 2" mount hole spacing. Includes memory lock
SC-STL4Hinged tom / floor tom mount bracket. Fits 9.5mm to 12.7mm L rod. 2" mount hole spacing. Includes memory lock
SC-670TB Pearl style tom bracket. Mounts to tom shell or suspension plate. Accepts 7/8" diameter tube. 3-hole mount. 2-1/8" x 2-1/8" x 2-1/8" mount hole spacing
SUSPENSION MOUNTSC-USS Universal Suspension Mount. Mounts to 2 tension rods from 8" to 14" diameter tom
RACK TOMPARTS
STEEL TOM HOOP
STEEL TOM HOOP
INTERNAL SHELL LUG SCREW
SUSPENSION MOUNT
SWIVEL NUT
TENSION ROD
TENSION ROD WASHER
TOM MOUNT BRACKET
TENSION ROD WASHERS SC-11Metal Tension Rod Washers (12pk)
SC-12Nylon Tension Rod Washers, white (12pk)
SC-SSWABS Tension Rod Washers, black (10pk)
TENSION RODS SC-BDKR/SBass Drum Tension Rod. 106mm, 4-3/16" length. M5, 0.8 thread pitch. TPI 24 threads / inch. (4pk)
SC-BDKR/LBass Drum Tension Rod. 112mm, 4-3/8" length. M6, 1.0 thread pitch. TPI 24 threads / inch. (4pk)
SC-BDTR/SBass Drum T Rod. 106mm, 4-3/16" length. M5, 0.8 thread pitch. TPI 24 threads / inch. (4pk)
SC-BDTR/LBass Drum T Rod. 112mm, 4-3/8" length. M6, 1.0 thread pitch. TPI 24 threads / inch. (4pk)
INTERNAL LUG SHELL SCREWS SC-ILSReplacement screws and washers for lugs. (10pk)
SWIVEL NUTS SC-LGSmall Swivel nuts fit most bass drum tension rods. (12pk)
BASS DRUM CLAW HOOK SC-CHUniversal claw hook for wood bass drum hoop. (4pk)
BASS DRUM HOOPS SC-18BK 18" wood bass drum hoop. 8 ply maple, black gloss SC-18M18" wood bass drum hoop. 8 ply maple, natural gloss SC-20BK 20" wood bass drum hoop. 8 ply maple, black gloss
BASS DRUM HOOPS, CONTINUEDSC-20M20" wood bass drum hoop. 8 ply maple, natural gloss
SC-22BK 22" wood bass drum hoop. 8 ply maple, black gloss
SC-22M22" wood bass drum hoop. 8 ply maple, natural gloss
BASS DRUM MOUNTS SC-670BBBass drum double post mount. Mounts to bass drum and accepts 7/8" diameter tube. 4-hole mount. 4-1/2" x 2-1/4" hole spacing
SC-1BDBBass drum single post mount. Mounts to bass drum and accepts 1" diameter tube. 4-hole mount. 1-3/4" x 1-3/8" hole spacing
SC-GVRMBass drum rail mount. L arm accepts 10.5mm tom bracket
BASS DRUM SPURS SC-BS2Light weight bass drum spurs. Solid steel rod with rubber tip and cast bracket. 12" spur length. 3-hole mount. 1-1/2" x 2" mount hole spacing
SC-BS4Medium weight bass drum spurs. Telescopic bass drum spurs with angle adjustable mount. Spure extendss up to 14". 4-hole mount. 1-1/2" x 1-3/4" x 2-1/2" mount hole spacing
SC-BS5Gull wing spur set with cast brackets. Spur length 12" with 10.5" diameter. 2-hole mount with 2" mount hole spacing
SC-GVSVintage Spurs, 12.7mm with mounting bracket
BASS DRUMPARTS
BASS DRUM HOOP
BASS DRUM TENSION ROD
BASS DRUM CLAW HOOK
BASS DRUM T ROD
BASS DRUM MOUNT
BASS DRUM SPUR
INTERNAL SHELL LUG SCREW
SWIVEL NUT
TENSION ROD WASHER
PEDAL SPRINGS AND ASSEMBLIESSC-15C Standard Pedal Spring. Chrome Steel. (2pk)
SC-15FUniversal Pedal Spring. Black Steel. (2pk)
SC-0052Pedal Spring Assembly. Includes rocker attachment. (2pk)
SC-0053Pedal Spring Tension Assembly. Spring, tension rod & locking nuts. (2pk)
PEDAL BOARD AND HOOP CLAMP PARTS SC-0055Hoop Clamp Tension Screw. Standard pedal wing screw, 8mm. (2pk)
SC-TSPedal Board Toe Stop. Fits all Gibraltar and many other manufac-turers' pedal boards. (2pk)
BEATER HUB SCREWS SC-0121Beater Hub Locking Key Screw, 8mm. (4pk)
DOUBLE PEDAL CONNECTOR ARM & SCREWSSC-3030C Universal Double Pedal Connector Arm
SC-0129Double Pedal U-joint Locking Key Screw, 6mm. (4pk)
PEDAL STRAP SC-15B Kevlar Bass Drum Pedal Strap. 1-1/16" W x 7-5/8" L
PEDAL BEATERS SC-3259Felt Bass Drum Beater, Long. White felt, with medium impact. 7" black stem
SC-3260Felt Bass Drum Beater, Standard. White felt, with medium impact. 6.25" black stem
SC-3261Felt Bass Drum Beater, Short. White felt, with medium impact. 6" chrome stem
SC-3262Wood Bass Drum Beater, Natural. Wood beater, high impact. 6.25" chrome stem
SC-3263Wood Bass Drum Beater, Red. Wood beater, high impact. 7" black stem
PEDAL BEATERS, CONTINUEDSC-3264 Wood Bass Drum Beater, Red. Wood beater, high impact. 8" black stem
SC-3266G5 Bass Drum Beater. Two-sided Felt / 90GSM black acrylic beater, mid-high impact. 6.25" chrome stem
SC-3267G Class Bass Drum Beater. Two-sided Felt / 90GSM red acrylic beater, mid-high impact. 6.25" chrome stem
SC-DSABDual Surface Self-Aligning Beater. Felt / ABS hinged beater, mid-high impact. 7" chrome stem
SC-FLTSOFTYFlat Softy Bass Drum / Cajon Beater. Soft felt / ABS beater, low impact. 7" chrome stem
SC-LBDBLight Weight Bass Drum Beater. Small felt beater, mid-low impact. 6.25" chrome stem
SC-RFSABRound Flat Self-Aligning Beater. Flat felt / ABS hinged beater, mid-high impact. 6.25" chrome stem
SC-GBBBBlack Ball Beater. Rubber black ball beater for cajon and electronic drums
BASS DRUM PEDAL PARTS
PEDAL BOARDTOE STOP
DBL PEDAL U-JOINT LOCKING KEY SCREW
UNIVERSAL DOUBLE PEDAL
CONNECTOR ARMBEATER HUB LOCKING
KEY SCREW
PEDAL BEATER
HOOP CLAMP TENSION SCREW
PEDAL SPRING
PEDAL STRAP
PEDAL SPRINGTENSION ASSEMBLY
HI-HAT SEAT PARTS SC-1655-1Hi-Hat Cup Washer. Flat metal washer fits under felt on hi-hat cup. (2pk)
SC-HF2Hi-Hat Cup Felts. (2pk)
SC-HR1Rubber Hi-Hat Seat. Lasts longer than felts, and enhances sustain. (1pk)
SC-4980JHi-Hat Seat. Fits Gibraltar and most professional hi-hat stands. Works with 1" and 3/4" diameter tube. UPPER PULL RODS SC-HHRM Hi-Hat pull rod with metric M6 threads. 23" length.
SC-HHRSHi-Hat pull rod with standard 1/4" - 20 threads. 23" length CLUTCHES AND PARTS SC-QRHHCQuick Release Hi Hat Clutch. "Super Grip" clamping mechanism, which will not scar the pull rod. Quick release equipped with spring and ball bearing locking sleeve. Fits with a 7mm rod
SC-4420SSuper Hi Hat Clutch. "Super Grip" clamping mechanism, which will not scar the pull rod. Fits with a 7mm rod
SC-4420Deluxe Hi Hat Clutch. Fits Gibraltar and most professional stands. Fits with a 7mm rod
SC-4421D Standard Hi Hat Clutch. Fits Gibraltar 5000, 6000, and 8000 Series Hi Hat stands and most moderate priced stands. Fits with a 7mm rod
SC-4421Universal Hi Hat Clutch. Fits most entry level hi hat stands. Fits with a 7mm rod
CLUTCHES AND PARTS, CONTINUEDSC-DCHi Hat Drop Clutch. Disengage and drop top cymbal by hitting clutch with stick. Step on pedal to engage the clutch. Fits with a 7mm rod
SC-QRHHDCQuick Release Hi Hat Drop Clutch. Fitted with quick release locking sleeve. Disengage and drop top cymbal by hitting clutch with stick. Step on pedal to engage the clutch. Fits with a 7mm rod
SC-CLF/4Clutch felts. (4pk)
SC-CLR/2Rubber hi hat clutch pads. (2pk)
HEIGHT ADJUST COLLAR/ TRIPOD WING NUTS & SCREWS SC-13P36mm heavy duty wing nut. (2pk)
SC-00098mm Heavy duty wing screw, direct-in. (2pk) RUBBER FEET SC-PC07Large Rubber Feet. 5/16" x 3/4" opening. (3pk)
SC-PC08Large, fits eliptical legs. (3pk)
SC-PC09Large Round Feet. 5/16" x 3/4" opening. (3pk)
SC-PC10Small Round Feet. 9/32" x 5/8" opening. (3pk)
SC-PC13Small Rubber Feet. 1/8" x 3/4" opening. (3pk)
HI-HAT STANDPARTS
HI-HAT SEAT
RUBBER FEET
UPPER PULL ROD
HEIGHT ADJUST COLLAR
CLUTCH
CYMBAL TILTER WING NUTS SC-13G6mm light duty wing nut. (5pk)
SC-13E8mm light duty wing nut. (5pk)
SC-13P28mm heavy duty wing nut. (2pk)
SC-13P36mm heavy duty wing nut. (2pk)
SC-TCWN66mm nylon T-style cymbal wing nut. (4pk)
SC-TCWN88mm nylon T-style cymbal wing nut. (4pk)
HEIGHT ADJUST COLLAR/ TRIPOD WING NUTS & SCREWSSC-13P36mm heavy duty wing nut. (2pk)
SC-00098mm Heavy duty wing screw, direct-in. (2pk) CYMBAL SLEEVES SC-19ANylon 8mm tall sleeve with flanged base/seat. (4pk)
SC-19BNylon 8mm short sleeve with flanged base/seat. (4pk)
SC-CS6MMNylon 6mm cymbal sleeves. (4pk)
SC-CS8MMNylon 8mm cymbal sleeves. (4pk)
SC-TPCS4Replacement cymbal sleeve for Swing Nut. (4pk)
CYMBAL SEATS SC-20ARubber flanged seat with tall 8mm sleeve. (1pk)
SC-20BRubber flanged seat with short 8mm sleeve. (1pk)
SC-MCWMetal cymbal stand washer. Sits on 8mm cymbal post to support cymbal felts and cymbal. (4pk)
CYMBAL FELTS SC-CFS/4Short cymbal felt. 3/4" thick. (4pk)
SC-CFL/4Long cymbal felt. 1-1/2" thick. (4pk)
RUBBER FEET SC-PC07Large Rubber Feet. 5/16" x 3/4" opening. (3pk)
SC-PC08Large, fits eliptical legs. (3pk)
SC-PC09Large Round Feet. 5/16" x 3/4" opening. (3pk)
SC-PC10Small Round Feet. 9/32" x 5/8" opening. (3pk)
SC-PC13Small Rubber Feet. 1/8" x 3/4" opening. (3pk)
CYMBAL STANDPARTS
RUBBER FEET
CYMBAL FELTS
CYMBAL SLEEVE
CYMBAL TILTER WING NUT
HEIGHT ADJUST COLLAR
CYMBAL SEAT
TOM MOUNTING ARMS
PLATFORM TOM MOUNTS
L RODS BALL L RODS
TOM MOUNTINGDRUM BRAND MATCH FOR
TAMA • LUDWIG • MAPEX* • SONOR* PDP • DDRUM • SJC • CRUSH • PREMIER
L RODS
BALL L RODS
TOM MOUNTING ARMS
PLATFORM TOM MOUNTS
SC-LRM-1 12mm x 10.5mm L Rod
SC-SLR 26.5mm x 10.5mm Super L Rod
*Hex Version (Mapex and Sonor only) SC-DWLRY 26.5mm x 10.5mm Hex L Rod
SC-LBM 10.5 mm Ball L Rod
(older Ludwig only)SC-LBS 9.5mm Ball L Rod
*Hex Version (Mapex and Sonor only)SC-HBL 10.5mm Hex Ball L Rod
SC-BCLR-M 10.5mm Clam-style L-Rod Tom Arm
SC-BALRM 10.5mm L-Rod Tom Arm w/ 360˙ adjust
SC-MEDUA 10.5mm Ultra Adjust L-Rod Tom Arm
*Hex Versions (Mapex and Sonor only))SC-BCLR-H 10.5mm Clam-style Hex L-Rod Tom Arm
SC-BALRH 10.5mm Hex Rod Tom Arm w/ 360˙ adjust
SC-HEXUA 10.5mm Hex Ultra Adjust Tom Arm
DRUM BRAND MATCH FORDRUM WORKSHOP (DW) • GRETSCH
DRUM BRAND MATCH FORPEARL • CB
L RODS
BALL L RODS
TOM MOUNTING ARMS
PLATFORM TOM MOUNTS
TOM MOUNTING ARMS
DRUM BRAND MATCH FORGENERIC
TOM MOUNTING ARMS
SC-LRL-1 12mm x 12.7mm L Rod
SC-DWLR 26.5mm x 12.7mm Super L Rod
SC-SLRM 10.5mm Single Ball L-Rod Mount
SC-SBLAM-M 10.5mm Single Ball L-Rod Mount
SC-SLLRM 12.7mm Single Ball L-Rod Mount
SC-SBLAM-L 12.7mm Single Ball L-Rod Mount
SC-LBL 12.7mm Ball L Rod
SC-BCLR-L 12.7mm Clam-style L-Rod Tom Arm
SC-BALRL 12.7mm L-Rod Tom Arm w/ 360 degree adjust
SC-LGUA 12.7mm Ultra Adjust L-Rod Tom Arm
SC-700HAGear-tilt Tom Arm w/ 10" downtube, 7/8" dia. mount and tube
SC-78UAUltra Adjust Tom Arm w/ 10" downtube, 7/8" dia. mount and tube
SC-BA78Ball Rod Tom Arm w/ 10" downtube, 7/8" dia. mount and tube
SC-600HAGear-tilt Tom Arm w/ 10" downtube, 3/4" dia. mount and tube
top related