cordless - vpmediaservice web service • 50 – valo cordless barrier sleeves overview of controls:...
Post on 27-Apr-2018
215 Views
Preview:
TRANSCRIPT
1
EN
Read all instructions before operating this unit.
The VALO Cordless LED curing light emits extremely high intensity light waves and must only be used as indicated in this manual.
WARNING• DONOTlookdirectlyintothelightoutput.Patient,clinicianandassistantsshould wear UV orange eye protection when this device is in use.• DONOTexposesoftoraltissuesatcloseproximity.Maintainasafedistance
between the lens and the soft tissue.• IfusingtheVALOCordlessLEDCuringLightintheStandardandhighPowerModesandincloseproximityofthegingivaltissue,DONOTexposetissueformorethan20seconds.Iflongercuringtimeisrequired,consideradual-cure product (composite or adhesive).• InXtraPowerMode,DONOTexposesoftoraltissueformorethan9seconds.TheXtraPowerModehasa2secondsafetydelaytolimitoraltissueheatingduringconsecutivecuring.Ifalongercureisneeded,consideradual-cure product (composite or adhesive).
Product Information:Indications for Use: The source of illumination for curing photo-activated dental restorative materials and adhesives.
TheVALOCordlesscuringlightusesacustom,multi-wavelength(395-480nm)LightEmittingDiode(LED)forproducing the high intensity light capable of polymerizing all light cure dental materials. This intensity will also penetrateporcelainandiscapableofcuringunderlyingresincementssimilartoaqualityhalogenlight.
The VALO Cordless curing light uses Ultradent VALO rechargeable batteries and battery charger.
Product Components: • 1–VALOCordlesscuringlight• 4–UltradentVALOrechargeablebatteries• 1–UltradentVALObatterychargerwithmedicalgradeS/B12VDCACpoweradapter
VALO®
CordlessCuring Light
2
• 50–VALOCordlessBarrierSleeves
Overview of Controls:
Photo LegendButtons and Lights
Power Button
Timing Lights
Low Battery - Safety Indicator
Mode/Status Light
Timing/Mode Change Button
Instructions for Use:1-Removeallcomponentsfromthepackagingandexaminethem.Ifanythingappearstobedamagedreturnto
the manufacturer.2-Chargebatteriesbeforeusingthedevice(SeesectionChargingandChangingBatteries).3-Inserttwofullychargedbatteriesplus(+)endfirst.4-Replacethebatterycover.5-TheVALOCordlesshandpiecewillbeepwhenpoweringon.6-Selectthedesiredmode(seesectionQuickModeGuide).7-Presspowerbuttontoactivatethelight.
NOTE: TheVALOCordlesscuringlightisprogrammedtocyclefromtheStandardPowertotheHighPowertotheXtraPowermodeinsequence.Forexample,tochangefromtheStandardPowermodetotheXtraPowermode,itisnecessarytocycleintotheHighPowermodeandthentotheXtraPowermode.
TheVALOCordlesscuringlightalwaysstoresitslastusedtimingintervalineachmodeandwilldefaultbacktothat timing interval whenever the modes are changed or if the batteries are removed.
SLEEP MODE: TheVALOCordlesscuringlightwillgointoPOWERSAVEmodeafter30secondsofinactivity,as
3
indicatedbyaslowflashingofthemode/statuslight.Pickinguportouchingtheunitwillwake-upVALOCordlessand automatically return it to the last setting used.
WARNING: StorageandTravel:IfstoringtheVALOCordlessforperiodslongerthan2weeks,orpackingitfortravel,alwaysremovethebatteries.Ifbatteriesareleftintheunitforlongperiodsoftimewithoutrechargingtheymay become nonfunctional or un-chargeable.
Charging and Changing Batteries
TheVALOCordlesscomeswith4rechargeablesafelithiumbatteries.
How to charge batteries1. Plugchargerintoelectricaloutlet.2. Insertbatteriesintochargerwithplus(+)endpointedtowardstheLEDlightsoncharger.3. LEDsindicatebatteriesarecharging.4. GreenLEDsindicatebatteriesarereadyforuse.Batterieswilltakeabout1-3hourstocharge.Leavebatteriesinchargeruntilreadyforuse.
How to change/insert batteries1. Removebackcapbytwistingcounterclockwiseaquarterturn.2. Removebatteries.3. Insertfreshbatteriespositive(+)sidefirst.4. Reattachbackcapbyaligningandgentlypushingwhiletwistingclockwise.Thecapwillclickwhen
fully attached.5. Theunitisreadyforuse.
4
WARNING–CAUTION
• VALOCordlesswillnotoperateifbatteriesareputinbackwards.IftheVALOCordlessdoesnotturnonwhenfreshbatteriesareinserted,removethebatteriesandchecktoseethattheyareinsertedcorrectlywiththepositive(+)batteryendspointedforward,asshownabove.
• Donotinsertfingers,instruments,orotherobjectsintothebatterycompartment.• Donotattempttocleanthegoldcontacts,or anyotherpartofthebatterycompartment.CallUltradent
CustomerServiceifthereisaconcern.
LOW BATTERIES: The VALO Cordless signals the user that it is time to change the batteries when the Low BatteryIndicatorLightisflashingred.Ifthebatterychargebecomestoolow,anaudible3beepwarningsoundwilloccur and the VALO will not allow further operation until batteries recover or new batteries are inserted.
Charging Time and Battery Life: BatterylifeintheVALOCordlessisdependentontheMODE,TIMEinterval,batterytype,amountofuse,andLEDefficiency.Ingeneral,rechargeblebatteriesshouldlast1-2weeks. Non-rechargeablebatteriesmaylast2-3timeslonger.• Recommended Recharge Interval: Toavoidlowbatterywarningsorshutoffduringaprocedure,recharge
batteriesevery1–2weeks.• ExtraBatteries: ToavoidpossibleVALOCordlessdowntime,keepanextrasetofnon-rechargeablebatteries
onhandincasebatteriesgetlostorhavenotbeencharged.Seelistofauthorizedbatteries.Youcanalsoorderextra rechargeable batteries as needed.
Battery Life Expectancy: RechargeableLithiumIronPhosphatebatteriescanberechargedapproximately1000to2000timesbeforewearingout.However,ineverydayuse,batteriesmaybedropped,scratched,scuffed,lostandmisplaced.Keepasparesetofnon-rechargeableCR123batteriesavailable(VALOCordlesscomeswith4
5
rechargeable batteries).
Note: If you are moving the light from operatory to operatory and the light does not go to sleep then the battery life may be affected. Replace more often with rechargeable batteries.
WARNING - CAUTION• Makesurebatteriesareinsertedintothechargerinthecorrectorientation.• IftheredLEDonthechargerdoesn’tturntogreen,thismeansabatterymaybedegraded(corrupted)andcannotbecharged.TryanewbatteryorcallUltradentCustomerServicetoorderanewsetofrechargeablebatteries.
• Ifbatteriesshowcorrosionoremitascorchedodor,removebatteriesfromthechargerimmediatelyandcallUltradentCustomerService.
• Do not use batteries if the battery wrapping (plastic covering) is torn or removed from the battery. Replace with a new battery immediately and recycle old battery.
WARNING - CAUTION• Do not mix rechargeable batteries with non-rechargeable batteries.• Do not attempt to charge non-rechargeable batteries.• UseonlysaferechargeableLithiumIronPhosphatebatteriesornon-rechargeablebatteries.• Donotstorebatteriesintemperaturesover60°Corindirectsunlight.• DO NOT autoclave batteries, charger, AC power adapter, or VALO Cordless.
6
Ifnecessary,UltradentauthorizesthefollowingalternativebatteriesandchargersfortheVALOCordless.
Authorized Alternate Batteries Authorized Alternate ChargersRechargeable LiFePO4 batteries 1. Tenergy®3.6VRCR123A,750mAh 2. Powerizer®3.6VRCR123A,450mAh 3. Mottcell®3.6VIFR16340series
Non-rechargeable,primarybatteries 1. TenergyPropelPhotoLithium:(safe,long
lasting,recommended) 2. TitaniumInnovationsCR123A:(safe,long
lasting,recommended) 3. Energizer®123 4. Duracell®UltraCR123A 5. Sanyo®CR123A 6. Rayovac®CR123A 7. SureFire®SF123A 8. Panasonic®CR123A
Tenergy®3.6VRCR123LiFePO4 charger
Powerizer®3.6RCR123LiFePO4 charger
Note: Ultradent does not recommend or authorize other batteries or chargers at this time. While other battery typesandchargerswilloperatewiththeVALOCordless,theyhavenotbeentestedandmaynothavesafebattery chemistry or approved safety ratings.
Note: Alwaysrecyclespent,non-rechargeablebatteries.
Installing Hygienic Barrier SleevesThehygienicbarriersleevekeepsthesurfaceoftheVALOCordlesscleanandaseptic.Thebarriersleeveprevents crosscontaminationandhelpskeepdentalcompositematerialfromadheringtothesurfaceofthelensand wand body.
WARNING–CAUTION• Usingthehygienicbarriersleevewillreducethelightoutputby5-10%.DuetothehighoutputpoweroftheVALOCordless,curinghasbeenshowntobesubstantiallyequivalent.
• Barriersleevesaresinglepatientuseonly.
7
3sonly4s3s2s1s20s15s10s5s
ModePowerLevel
Standard Power1000 mW/cm2
High Power1400 mW/cm2
Xtra Power3200 mW/cm2
PowerButton
Mode/TimingLEDs
TimeButtonTime Options
To Change TimeToChangeModes
PressandreleaseTimeButtonquicklytocyclethroughtimeoptions.PressandholdtheTimeButtonfor2secondsandrelease.VALOwillcycletonextMode.
Legend SolidLEDs BlinkingLEDs
• Discardusedbarriersleevesaftereachpatient.• Donotleavebarriersleevesonthewandforextendedperiods.• VALOCordlessmustbecleanedandsanitizedwithappropriatecleaningand/orsanitizingagentsaftereachpatient.SeesectiontitledMaintenance and Cleaning.
Quick Mode Guide
Quick Curing Guide: Recommended Curing Times for Optimal Results with VALO Cordless
Mode
Power Level
Standard Mode
1000 mW/cm2
High Power Mode
1400 mW/cm2
Xtra Power Mode
3200 mW/cm2
Per Layer One 10 second cure Two 4 second cures One 3 second cure
Final Cure One 20 second cure Three 4 second cures Two 3 second cures
8
Quick Warning Guide
Power level Warning Temperature Warning Calibration Warning LED Warning
Replace batteries Allow cool down Send in for repair Send in for repair
Low battery: quiet flashing
Shut off: 3 beeps, flashing
Prohibits operation
3 beeps
Quiet flashing
Prohibits operation
No sound.
Flashing, 2 seconds
Allows operation
Continuous 3 beeps
Flashing
Prohibits operations
Power level Warning Temperature Warning Calibration Warning LED Warning
Replace batteries Allow cool down Send in for repair Send in for repair
Low battery: quiet flashing
Shut off : 3 beeps, flashing
Prohibits operations
3 beeps
Quiet flashing
Prohibits operation
No sound,
Flashing, 2 seconds
Allows operation
Continuous 3 beeps
Flashing
Prohibits operations
Power level Warning Temperature Warning Calibration Warning LED Warning
Replace batteries Allow cool down Send in for repair Send in for repair
Low battery: quiet flashing
Shut off : 3 beeps, flashing
Prohibits operations
3 beeps
Quiet flashing
Prohibits operation
No sound,
Flashing, 2 seconds
Allows operation
Continuous 3 beeps
Flashing
Prohibits operations
Power level Warning Temperature Warning Calibration Warning LED Warning
Replace batteries Allow cool down Send in for repair Send in for repair
Low battery: quiet flashing
Shut off : 3 beeps, flashing
Prohibits operations
3 beeps
Quiet flashing
Prohibits operation
No sound,
Flashing, 2 seconds
Allows operation
Continuous 3 beeps
Flashing
Prohibits operations
Power level Warning Temperature Warning Calibration Warning LED Warning
Replace batteries Allow cool down Send in for repair Send in for repair
Low battery: quiet flashing
Shut off : 3 beeps, flashing
Prohibits operations
3 beeps
Quiet flashing
Prohibits operation
No sound,
Flashing, 2 seconds
Allows operation
Continuous 3 beeps
Flashing
Prohibits operations
CURING MODE: Standard Power mode - 1000 mW/cm2
USES: Curingofrestorativematerialswithphotoinitiators.
TIMINGINTERVALS: 5,10,15,20seconds.
VALOCordlessdefaultstothismodewhenitisINITIALLYpoweredon.TheStatusLightisgreenandthegreenTiming Lights are solidly illuminated.
Tochangetimingintervals,quicklypresstheTime/ModeButton.
PressthePowerButtontocure.Tostopcuringpriortocompletionofatiminginterval,pressthePowerButtonagain.
CURING MODE: High Power mode - 1400 mW/cm2
USES: Initialcuringofrestorativematerialswithphotoinitiators.Tackingofveneers,brackets,andrestorativematerials.
TIMINGINTERVALS: 1,2,3,4seconds.
9
FromStandardPowermode,pressandholdtheTimeButtonfor2seconds.ThegreenTimingLightswillilluminateand flash.TheStatusLightwillilluminateasasteadyorangelight,indicatingHighPowermode.Atwo-secondpowertackisthemostcommonlyusedtimingintervalinthismode.
Tochangetimingintervals,quicklypresstheTime/ModeButton.
PressthePowerButtontocure.Tostopcuringpriortothecompletionofatiminginterval,pressthePowerButtonagain.
ToreturntoStandardPowermode,pressandholdtheTime/ModeButtonfor2seconds,release,holdagainfor2 seconds,andrelease.
CURING MODE: †Xtra Power mode - 3200 mW/cm2
USES: TheXtraPowermodeisusefulforalldentalcuring.Itisespeciallyvaluablefordeepcuringofrestorativematerials,placingthinveneers,attachingorthodonticbrackets,andfastcuringinpediatricsettings.
TIMINGINTERVAL: 3secondsonly(Note: there is a 2 second safety delay at the end of each curing cycle).
FromtheStandardPowermode,presstheTimeButtonfor2seconds,release,pressagainfor2seconds,andrelease.ThreeofthegreenTimingLightsandtheorangeStatusLightwillilluminateand flash,indicatingXtraPowermode.
PressthePowerButtontocure.Tostopcuringpriortocompletionofatiminginterval,pressthePowerButtonagain.
ToreturntotheStandardPowermode,pressandholdtheTimeButtonfor2seconds.
NOTE: TheVALOCordlesscuringlightisprogrammedtocyclefromtheStandardPowermodetotheHighPowermodetotheXtraPowermodeinsequence.Forexample,tochangefromtheStandardPowermodetotheXtraPowermode,itisnecessarytocycleintotheHighPowermodeandthentotheXtraPowermode.
†Note:‘XtraPower’equalPlasmaPowerlevelsintheCordedVALO.InthiscontextPlasmarefersto‘plasma-like’duetointenseopticaloutputandcuringcapacity.Actualplasmaarclightsgeneratebroadopticaloutputthatmustbefilteredtoreduceharmfulshortwaveultravioletradiation.
Note:Ifitisnecessarytocurenearsofttissue,coolingwithanairstreamisanoptionforkeepingtheareacooler.
10
WARNING • DONOTlookdirectlyintothelightoutput.Patient,clinicianandassistantsshouldwearUVorangeeye
protection when this device is in use.• DONOTexposesoftoraltissuesatcloseproximity.Maintainasafedistancebetweenthelensandthesoft
tissue.• IfusingtheVALOCordlessLEDCuringLightintheStandardandhighPowermodesandincloseproximityofthegingivaltissue,DONOTexposetissueformorethan20seconds.Iflongercuringtimeisrequired,considera dual-cure product (com posite or adhesive).
• InXtraPowerMode,DONOTexposesoftoraltissueformorethan9seconds.TheXtraPowerModehasa2 secondsafetydelaytolimitoraltissueheatingduringconsecutivecuring.Ifalongercureisneeded,considera dual-cure product (composite or adhesive).
Maintenance and Cleaning
TheVALOCordlesscuringlightisasealedunitwithasapphire-likehardsurfaceandascratchresistantglasslens.Aftereachuse,moistenagauzeorsoftclothwithananti-microbialsurfacedisinfectantandwipethesurfaceand lens.
Periodicallycheckthelensforcureddentalresins.Ifnecessary,useanon-diamonddentalinstrumenttocarefullyremove any adhered resin.
Thebarriersleevepreventscrosscontaminationandhelpskeepdentalcompositematerialfromadheringtothesurface of the lens and wand body.
Lightmetersdiffergreatlyandaredesignedforspecificlightguidetipsandlenses.UltradentrecommendscheckingVALOCordlessinStandardPowermode.NOTE:thetruenumericoutputwillbeskewedduetheinaccuracyofcommonlightmetersandthecustomLEDpackVALOCordlessuses.
WARNING - CAUTION • DONOTautoclavebatteries,charger,poweradapter,orVALOCordless.• DONOTinsertfingers,instruments,orotherobjectsintothebatterycompartmentoftheVALOCordless.• DONOTattempttocleanthegoldcontacts,oranypartofthebatterycompartment.CallUltradentCustomer
11
Serviceifthereisaconcern.• DONOTimmerseinanykindofultrasonicbathoranyliquids.• DONOTwipedowntheVALOCordlesscuringlightwithcausticorabrasivecleaners.Seelistsofacceptable
cleaners below:
ACCEPTABLE CLEANERS: • Cavicide™ products • Isopropyl alcohol-based cleaners • Ethyl alcohol-based cleaners • Lysol® disinfectant • Other non-bleach and non-abrasive disinfectants or cleaners
DO NOT USE: • Strongalkalidetergentofanytype,includinghandsoapsanddishsoaps • Bleach-basedcleaners(e.g.-Clorox™,Sterilox™) • HydrogenPeroxidebasedcleaners • AbrasiveCleansers(e.g.–CometCleanser™) • Acetone-basedcleaners(e.g.–nailpolishremover,Goo-off™) • MEK(MethylEthylKetone)
12
Troubleshooting GuideIfthesolutionssuggestedbelowdonotrectifytheproblem,pleasecallUltradentat800.552.5512.Outside the UnitedStates,callyourUltradentdistributorordentaldealer.
Problem Possible solutions
Light will not turn on 1. PresstheTime/ModeorPowerButtontowakefromPowerSaveMode.
2. ChecktheredLowBatteryIndicatorforbatterycharge status.
3. Checkthatfreshbatteriesarecorrectlyinsertedinto the unit.
4. If red and yellow Warning LEDs are flashing this means the VALO Cordless has reached its internal temperature safety limit. Allow the VALO Cordless tocooldownfor10minutesoruseacoolmoisttoweltocooltheunitdownquickly.
5. IfredWarningLEDflashesandbeepscontinuously,callUltradentCustomerServiceforrepair.
Light does not stay on for desired time 1. CheckthattheunitissettodesiredMode.2. ChecktheLowBatteryIndicatorforbatterycharge
status.3. Checkthatfreshbatteriesareproperlyinserted
into the unit.
Light is not curing resins properly 1. Checklensforresidualcuredresins/composites(see“MaintenanceandCleaning”).
2. UsingproperorangeUVeyeprotection,verifytheLEDdielightsareworking.
3. Checkpowerlevelwithlightmeter.4. Checkexpirationdateoncuringresin.
13
Batterieswillnotcharge 1. Makesurebatteriesareinsertedintothechargerinthe correct orientation and allow batteries to charge for 1 hour.
2. If red LEDs on the charger do not change to green,callUltradentCustomerServicetoorderreplacementbatteriesand/orcharger.
3. If neither green nor red LEDs on the charger are visible,callUltradentCustomerServicetoorderorreplacechargerand/orACadapter.
Batteriesshowcorrosionoremitascorchedodor 1. Remove charger from outlet immediately.2. CallUltradentCustomerServicefornewbatteries
and/orcharger.
Charger does not charge batteries 1. MakesurechargerispluggedinandACadapterispluggedintoaworkingpoweroutlet.
2. IfgreenorredLEDsonthechargerarenotvisible,callUltradentCustomerServicefornewchargerand/orACadapter.
Wrapping (plastic covering) comes off of the battery 1. Do not use these batteries in the VALO Cordless.2. Recycle batteries.3. CallUltradentCustomerServicetoorder
replacement batteries.
14
Technical Information VALO Cordless LED Curing LightWavelength range 395nm–480nm(seequalificationbelow)
EffectiveoutputPowerofVALOCordlessfallswithinthe following wavelength range:• 395nm<=EP<=480nm
Minimalandinsignificantpowercanbefoundinwavelength ranges:• 380nm–395nmand480nm–510nm
40000
35000
30000
25000
20000
15000
10000
5000
0360 380 400 420 440 460 480 500 520 540
XTRA POWER MODE3200 mW/cm2†
HIGH POWER MODE1400 mW/cm2*
STANDARD POWER MODE1000 mW/cm2*
RADI
ANT
FLUX
(µW
/nm
)
†As measured by integrating sphere*As measured by a Demitron Radiometer
Effective lower wavelength band395 nm - 415 nm
Effective Upper wavelength band440 nm - 480 nm
Effective Composite Curing Wavelength Bands
WAVELENGTH (nm)
15
Light Intensity *Standardpower–1000mW/cm2 +/-10%
*Highpower–1400mW/cm2 +/-10%
†XtraPower–3200mW/cm2 +/-20%(formerlycalled‘PlasmaEmulation’)
* As measured by a Demetron®L.E.D,Radiometer
† As measured by a spectrum analyzer
Den-Mat®SapphirePlasmaArcCuringLight–Irradiancemeasuredat2,600mW/cm2 with a spectrum analyzer
ACPowerAdapter GlobtekMedicalGradewithinternationalpluginsertsOutput: 12VDC,500mAInput: 100VAC–240VACRatings: MedicalGrade,(UL,CE,RoHS,WEEE)Cord: 6ft(1.8m),2.5mmDCconnector
16
VALO Cordless Protections: LowBattery,OverVoltage,OverTemperature,LEDFailure,CalibrationFailureLimitations for Use: VALO Cordless will not allow operationiftemperaturesexceed50°C.
Ratings: MedicalGrade,CE,RoHS,WEEEWeight: •Withbatteries: 5.5troyoz.(170grams) •Withoutbatteries: 4.4troyoz.(136grams)Dimension: (8x1.28x1.06)inches, (203x32.5x27)mm
VALO Charger VALO3.6VDCLithiumIronPhosphatesmartbatterycharger: • Automaticshutoffwhenfullycharged • Auto-detectionofdefectivebatteries • Protections: Thermal,Overcharge,Short-circuit,
reverse polarity o RedLED–Charging o GreenLED–EmptyorFullyCharged o LEDoff–shortcircuit • Chargingtime: 1–3hoursRating: CE,WEEE
VALOBatteries Rechargeable: SafechemistryLithiumIronPhosphate(LiFePO
4)RCR123A
• WorkingVoltage: 3.2VDCRatings: CE,RoHS,WEEE
Alternate use Non-rechargeable: LithiumCR-123A3VDC(usebatteriesgreaterthan1400mAh)
17
WARNING: Whensendingunitsinforrepair,service,orcalibrations,always remove the batteries from the VALOCordlessandcharger.Wrapbatteries,charger,adapter,andVALOCordlessseparatelyinthereturnbox.
WARNINGSandPRECAUTIONS
Read all instructions before operating this unit.
Themanufactureracceptsnoliabilityforanydamageresultingfromtheimproperuseofthisunitand/orforanypurpose other than those covered by these instructions.
USER-PATIENTSAFETYWARNINGS:• TheVALOCordlesscuringlightemitsextremelyhighintensitylightverysimilartohighintensityquartzhalogen
lights and must only be used as indicated in this manual.• DONOTlookdirectlyintothelightoutput.Patient,clinicianandassistantsshouldwearUVorangeeye
protection when this device is in use.• DONOTexposesoftoraltissuesatcloseproximity.Maintainasafedistancebetweenthelensandthesoft
tissue.• InXtraPowerMode,DONOTexposesoftoraltissueformorethan9seconds.TheXtraPowerModehasa
2 secondsafetydelaytolimitoraltissueheatingduringconsecutivecuring.Ifalongercureisneeded,considera dual-cure product (composite or adhesive).
• IfusingtheVALOCordlesscuringlightincloseproximityofthegingival,DONOTexposetissueformorethan20seconds.Ifa40-secondcureisneeded,allow2minutesbetweentwo20secondcures.Iflongercuringtimeisrequired,consideradual-cure.
PRODUCTSAFETYWARNINGS:• DONOTautoclave.• DONOTimmerseindisinfectant,cleaningsolutions,oranykindofliquid.• DONOTimmerseinanykindofultrasonicbath.• PRECAUTION: StaticElectricity–Thisunitmaybesusceptibletostrongmagneticorstaticelectricfieldswhichcoulddisrupttheprogramming.Ifyoususpectthishasoccurred,removethebatteriesfromtheunitmomentarily and then re-insert them.
18
Warningtoreadandfollowinginstructionsandpayattentiontospecificusewarningsandcautions.ThissymbolisontheVALOCordlessandonthepackaging.
VALOCordlesscomplieswithMedicalClassBelectricalsafety.ThissymbolisontheVALOCordlessandonthepackaging.
VALOCordlesscomplieswithEUregulationsforsafety,electricalandelectronicinterferenceandimmunity.ThissymbolisontheVALOCordlessandonthepackaging.
WEEEcompliant:Recycle,DoNotdiscardimproperly.ThissymbolisontheVALOCordlesspackagingbox.
RoHScompliant:VALOCordlesscontainsnorestrictedorhazardouscomponentsorsubstances.Thissymbol also means recycle and this symbol also indicates the direction of turning for reattaching the backcap.
VALOCordlessismanufacturedbyUltradentinaccordancewithGMPandISO13485practices.ThissymbolisontheVALOCordlesspackagingbox.
DateofManufacturesymbol.Thissymbol,followedbythedate(monthandyear)ofmanufacture,islocated on the top panel of the VALO Cordless.
Upper and lower temperature limitations: Do not store or transport VALO Cordless in areas above 65°C(149°F)orbelow-34°C(-30°F).Thissymbolisonthepackagingbox.
19
Keep Dry: Cargoes bearing this symbol must be protected from excessive humidity and must bestoredundercover.Thissymbolisonthepackagingbox.
VALO Cordless is to be used only by trained dental or medical professionals. This symbol is onthepackagingbox.
Authorized representativeThissymbolandaddressisontheinsidethebackcapoftheVALOCordless
Manufacturer-ManufacturingaddressThisaddressisontheinsideofthebackcapofVALOCordless
SerialnumberofVALOCordless.ThismarkandnumberisonthetoppanelofVALOCordless.
Thismarkingindicatesthecorrectmethodofinsertingbatteries,andislocatedonthetopsurfaceofthebatterycompartmentinlarge,yellowprint.
WarrantyUltradentherebywarrantsthatthisinstrumentshall,fora periodof2**yearsfromthedateofpurchase,conforminallmaterialrespectstothespecificationsassetforthinUltradent’s documentationaccompanyingtheproduct,andbefreefromanydefectsinmaterialsand/orworkmanship.Thiswarrantyappliessolelytotheoriginalpurchaserandisnottransferable.This warranty applies solely to the VALO Cordless and does not cover any accessory componentssuchasbatteries,chargers,adapters,andadaptivelenses.Therearenouserserviceable components of the VALO Cordless system. Tampering with VALO Cordless will void its warranty.TheVALOwarrantydoesnotcovercustomercauseddamage.Morespecificallythewarrantydoesnotcoverthecordorthelens.Forexample;ifaVALOisdroppedandthelensbreaks,the customer would be responsible to pay for any necessary repairs. **With sales receipt indicating the date of sale to the dentist.
UPDentalGmbHAmWesthoverBerg3051149Koln-PorzGermany
505W.10200S.SouthJordan,UT84095
20
505 West 10200 SouthSouth Jordan, UT 84095
88920.2 091211
© Copyright 2011 Ultradent Products, Inc. Patent Pending
U.S. federal law restricts this device to sale by or on the order of a dentist. For immediate reorder and/or complete descriptions of Ultradent’s product line,
refer to Ultradent’s catalog or call Toll Free 1-800-552-5512.Outside U.S. call +1-801- 572-4200
or visit www.ultradent.com.
top related