comp · comp cat-10.15 comp comp v3 function working principle the comp v3 offers fine adjustment...

COMPCompensation Tool Drill and Countersinking • Threedifferentversionswithdifferentvariancesandheightincrements

• Leaveseventhemostcriticalfinishesunmarked

• UsesremarkableVEXtechnologyforthecarbidedrillandcountersinksthreadquickly

COMP CAT-01.14

COMP

TheInnovatorandQualityLeaderintheCuttingToolIndustrysince1961

Foundedin1961byHeinrichHeule intheRhineValleyof

easternSwitzerland,HEULEcontinuestobeaworldleader

inmanufacturingofchamferinganddeburringtools.After

servingtheEuropeancommunityforover25years,HEULE

expandedtotheUnitedStates.HeuleToolCorporationhas

beenprovidinghighqualitychamferinganddeburringtools

totheNorthAmericanmarketsince1988.

HEULE is committed to the values of quality, precision

and service. Competent service, fast delivery times and

customized solutions are the highest priorities. From all

ranks, HEULE’s committed andmotivated expert staff

carry out theirworkwith reliability and professionalism.

Customer’sworldwideattest to thehighqualitystandard

HEULEprovidesandcontinuallyimprovesthroughinnovative

ideasandsophisticatedtechnology.

InnovativeToolswithTimesavingResults

Founded in 1961 by Heinrich Heule in the Rhine Valley of

western Switzerland, HEULE continues to be a world leader in

manufacturing of chamfering and deburring tools. After serving

the European community for over 25 years, HEULE expanded

to the United States. Heule Tool Corporation has been providing

high quality chamfering and deburring tools to the North

American market since 1988.

HEULE is committed to the values of quality, precision,and

service. Competent service, fast delivery times, and customized

solutions are the highest priorities. From all ranks, HEULE’s

committed and motivated expert staff carry out their work with

reliability and professionalism. Customer’s worldwide attest

to the high quality standard HEULE provides and continually

improves through innovative ideas and sophisticated technology.

•StateoftheartandEcofriendlyfactory

•Familyownedandoperated

•Guaranteedcustomersatisfaction

•Customizeddesignandbuilttooling

Innovative Tools with Timesaving Results

HeuleTool.com (513) 860-9900

Table of Contents

Heule Tool Corporation 4722 A Interstate Drive | Cincinnati, Ohio 45246

3 Case Study

4 Introduction

5-6 MICROSNAp Series 2

7-8 MICROSNAp Series 3

9-10 MICROSNAp Series 4

11 Technical Instructions

12 Technical Information

13 Programming Information

14 Technical Information

MICROSNAPTableofContents

3

3

4

5

6

Overview

Good Things Come in 3

COMP V1 Function

COMP V2 Function

COMP V3 Function

COMP

HeuleTool.com (513) 860-9900Huele Tool Corporation

4722 A Interstate Drive | Cincinnati, Ohio 45246

ONEOPERATION

513-860-9900 www.heuletool.com

COMP CAT-10.15

SNAP OverviewCOMP

Meetingaerospacecustomers’furtherneedforaccuracyandnon-rotationalendeffectorsthatcannotmarksupercriticalfinishes,theCOMPtoolwasborn.

TheHeuleCOMPtoolhighlightsthetruemeaningofswissengineering and innovation by meeting the challenges ofmanufacturing state of the art tooling that can hold up inhighdemandproductionfacilities.

Compensation Tool

GOOD THINGS COME IN THREESV1The earliest version of an adjustable countersink allowed simple insert-able inserts to front countersink holes where the surface of the part varied.

Variant of part +/- 2.5mm/height increments +.04

V2This tool allowed the nylon cage to contact the part first avoiding chip interference. The double compression action allows for drilling and accurate countersinking with a solid carbide step drill.

V3The lastest COMP tool offers fine adjustment to the chamfer depth of .0008” (0.02mm), a longer drill depth of

Variant of part +/- 3.75mm/height increments +.02

up to 3xd, and non-rotating arm for no marking of critical parts

Variant of part +/- 3.5mm/height increments +.04

3

513-860-9900 www.heuletool.com

COMP CAT-10.15

COMP V1 FunctionCOMP

ProgrammingSequence

TestPlates:CountersinkAnglesorRadius

This tool is spring loaded anddesigned to cut a specific countersink size.Once the specific size chamfer isproduced, the faceof the toolstops rotationwhilemakingcontactwith thepart; and thecuttercannot travelfurtherintothepart.COMPV1wasdesignedwithapproximately2mmofspringloadedtravelsoevenapartlocationvarianceofupto0.080ofaninchwillnotbeaproblem.Variantofpart+/-2.5mm/heightincrements+.04.

HowDoesTheCOMPV1ToolWork?

COMPToolwithbronzecontactring

4

513-860-9900 www.heuletool.com

COMP CAT-10.15

COMP V2 FunctionCOMP

ProgrammingSequence

SteppedSurface

SteppedSurfaceCountersinking

Thistoolallowsthecagetocontacttheworkingpartfirst,avoidinganychipinterference.Thedoublecompressionactionallowsfordrillingandcountersinkingwithacarbidestepdrillorcounterwithpilot.UsingtheVEXtechnol-ogy,thecarbidedrillhasathreadedquickchangesteelshank.Theacrylicringiseasilyreplaceable;variantofpart+/-3.55mm/heightincrementsof+.04.

HowDoesTheCOMPV2ToolWork?

5

513-860-9900 www.heuletool.com

COMP CAT-10.15

COMP V3 FUNCTIONCOMP

WorkingPrinciple

TheCOMPV3offersfineadjustmenttothechamferdepthof.0008”(0.02mm),alongerdrilldepthofupto4xd,andcoolantthroughcapabilities.Thisisadoublecompensationtoolwhichmeansthecontactringcompressesastheholeisdrilled,andthenthecontactringholdercompressesafterthepredeterminedcountersinkdepthisreached.TheCOMPV3contactringdoesnotspinduetotheantirotationdevice,leavingnomarkings.Thistoolisbestchosenwhenfinishisahighpriority.Variantofpart+/-3.75mm/heightincrementsof+.02.

HowDoesTheCOMPV3ToolWork?

Step 1

Step 3

Step 2

Step 4

Step 6

Step 5

Makescontactwithworkpiece

Compression 1Contactringmovesupasitdrillshole

Thepresetcountersinkisproduced

Compression 2Countersinkreachesmaximumdepth.Thecontactringholderandcontactringwillmoveuptogetherasthedrillstaysstationary.

Drillremoved

Finishedpart

Adjustment Ring

Contact Ring Holder

Contact Ring

Tool Head

Workpiece

6

Over 50 Years of Manufacturing Cutting ToolsHEULE manufactures cutting tools of the highest quality and precision consistent with Swiss craftsmanship for use in the machine tools of some of the world’s largest manufacturers; and the smallest machine shops.

ISO 9001:2008 CompanyHEULE TOOL CORPORATION 4722 A Interstate Drive Cincinnati, Ohio 45246 USA

Phone (513) 860-9900 Fax (513) 860-9992 info@heuletool.com www.heuletool.com

HEULE WERKZEUG AG Wegenstrasse 11/Postfach 9436 Balgach Switzerland

Phone +41 71 726 38 38 Fax +41 71 726 38 39 www.heule.com

DEBURRING CHAMFERING

COUNTERSINKING DRILLING

COFA

SNAP

BSF

SOLO

GH-Z/E

GH-K

SNAP

GH-S

DEFA

VEX-P

VEX-S