comp · comp cat-10.15 comp comp v3 function working principle the comp v3 offers fine adjustment...
TRANSCRIPT
COMPCompensation Tool Drill and Countersinking • Threedifferentversionswithdifferentvariancesandheightincrements
• Leaveseventhemostcriticalfinishesunmarked
• UsesremarkableVEXtechnologyforthecarbidedrillandcountersinksthreadquickly
COMP CAT-01.14
COMP
TheInnovatorandQualityLeaderintheCuttingToolIndustrysince1961
Foundedin1961byHeinrichHeule intheRhineValleyof
easternSwitzerland,HEULEcontinuestobeaworldleader
inmanufacturingofchamferinganddeburringtools.After
servingtheEuropeancommunityforover25years,HEULE
expandedtotheUnitedStates.HeuleToolCorporationhas
beenprovidinghighqualitychamferinganddeburringtools
totheNorthAmericanmarketsince1988.
HEULE is committed to the values of quality, precision
and service. Competent service, fast delivery times and
customized solutions are the highest priorities. From all
ranks, HEULE’s committed andmotivated expert staff
carry out theirworkwith reliability and professionalism.
Customer’sworldwideattest to thehighqualitystandard
HEULEprovidesandcontinuallyimprovesthroughinnovative
ideasandsophisticatedtechnology.
InnovativeToolswithTimesavingResults
Founded in 1961 by Heinrich Heule in the Rhine Valley of
western Switzerland, HEULE continues to be a world leader in
manufacturing of chamfering and deburring tools. After serving
the European community for over 25 years, HEULE expanded
to the United States. Heule Tool Corporation has been providing
high quality chamfering and deburring tools to the North
American market since 1988.
HEULE is committed to the values of quality, precision,and
service. Competent service, fast delivery times, and customized
solutions are the highest priorities. From all ranks, HEULE’s
committed and motivated expert staff carry out their work with
reliability and professionalism. Customer’s worldwide attest
to the high quality standard HEULE provides and continually
improves through innovative ideas and sophisticated technology.
•StateoftheartandEcofriendlyfactory
•Familyownedandoperated
•Guaranteedcustomersatisfaction
•Customizeddesignandbuilttooling
Innovative Tools with Timesaving Results
HeuleTool.com (513) 860-9900
Table of Contents
Heule Tool Corporation 4722 A Interstate Drive | Cincinnati, Ohio 45246
3 Case Study
4 Introduction
5-6 MICROSNAp Series 2
7-8 MICROSNAp Series 3
9-10 MICROSNAp Series 4
11 Technical Instructions
12 Technical Information
13 Programming Information
14 Technical Information
MICROSNAPTableofContents
3
3
4
5
6
Overview
Good Things Come in 3
COMP V1 Function
COMP V2 Function
COMP V3 Function
COMP
HeuleTool.com (513) 860-9900Huele Tool Corporation
4722 A Interstate Drive | Cincinnati, Ohio 45246
ONEOPERATION
513-860-9900 www.heuletool.com
COMP CAT-10.15
SNAP OverviewCOMP
Meetingaerospacecustomers’furtherneedforaccuracyandnon-rotationalendeffectorsthatcannotmarksupercriticalfinishes,theCOMPtoolwasborn.
TheHeuleCOMPtoolhighlightsthetruemeaningofswissengineering and innovation by meeting the challenges ofmanufacturing state of the art tooling that can hold up inhighdemandproductionfacilities.
Compensation Tool
GOOD THINGS COME IN THREESV1The earliest version of an adjustable countersink allowed simple insert-able inserts to front countersink holes where the surface of the part varied.
Variant of part +/- 2.5mm/height increments +.04
V2This tool allowed the nylon cage to contact the part first avoiding chip interference. The double compression action allows for drilling and accurate countersinking with a solid carbide step drill.
V3The lastest COMP tool offers fine adjustment to the chamfer depth of .0008” (0.02mm), a longer drill depth of
Variant of part +/- 3.75mm/height increments +.02
up to 3xd, and non-rotating arm for no marking of critical parts
Variant of part +/- 3.5mm/height increments +.04
3
513-860-9900 www.heuletool.com
COMP CAT-10.15
COMP V1 FunctionCOMP
ProgrammingSequence
TestPlates:CountersinkAnglesorRadius
This tool is spring loaded anddesigned to cut a specific countersink size.Once the specific size chamfer isproduced, the faceof the toolstops rotationwhilemakingcontactwith thepart; and thecuttercannot travelfurtherintothepart.COMPV1wasdesignedwithapproximately2mmofspringloadedtravelsoevenapartlocationvarianceofupto0.080ofaninchwillnotbeaproblem.Variantofpart+/-2.5mm/heightincrements+.04.
HowDoesTheCOMPV1ToolWork?
COMPToolwithbronzecontactring
4
513-860-9900 www.heuletool.com
COMP CAT-10.15
COMP V2 FunctionCOMP
ProgrammingSequence
SteppedSurface
SteppedSurfaceCountersinking
Thistoolallowsthecagetocontacttheworkingpartfirst,avoidinganychipinterference.Thedoublecompressionactionallowsfordrillingandcountersinkingwithacarbidestepdrillorcounterwithpilot.UsingtheVEXtechnol-ogy,thecarbidedrillhasathreadedquickchangesteelshank.Theacrylicringiseasilyreplaceable;variantofpart+/-3.55mm/heightincrementsof+.04.
HowDoesTheCOMPV2ToolWork?
5
513-860-9900 www.heuletool.com
COMP CAT-10.15
COMP V3 FUNCTIONCOMP
WorkingPrinciple
TheCOMPV3offersfineadjustmenttothechamferdepthof.0008”(0.02mm),alongerdrilldepthofupto4xd,andcoolantthroughcapabilities.Thisisadoublecompensationtoolwhichmeansthecontactringcompressesastheholeisdrilled,andthenthecontactringholdercompressesafterthepredeterminedcountersinkdepthisreached.TheCOMPV3contactringdoesnotspinduetotheantirotationdevice,leavingnomarkings.Thistoolisbestchosenwhenfinishisahighpriority.Variantofpart+/-3.75mm/heightincrementsof+.02.
HowDoesTheCOMPV3ToolWork?
Step 1
Step 3
Step 2
Step 4
Step 6
Step 5
Makescontactwithworkpiece
Compression 1Contactringmovesupasitdrillshole
Thepresetcountersinkisproduced
Compression 2Countersinkreachesmaximumdepth.Thecontactringholderandcontactringwillmoveuptogetherasthedrillstaysstationary.
Drillremoved
Finishedpart
Adjustment Ring
Contact Ring Holder
Contact Ring
Tool Head
Workpiece
6
Over 50 Years of Manufacturing Cutting ToolsHEULE manufactures cutting tools of the highest quality and precision consistent with Swiss craftsmanship for use in the machine tools of some of the world’s largest manufacturers; and the smallest machine shops.
ISO 9001:2008 CompanyHEULE TOOL CORPORATION 4722 A Interstate Drive Cincinnati, Ohio 45246 USA
Phone (513) 860-9900 Fax (513) 860-9992 [email protected] www.heuletool.com
HEULE WERKZEUG AG Wegenstrasse 11/Postfach 9436 Balgach Switzerland
Phone +41 71 726 38 38 Fax +41 71 726 38 39 www.heule.com
DEBURRING CHAMFERING
COUNTERSINKING DRILLING
COFA
SNAP
BSF
SOLO
GH-Z/E
GH-K
SNAP
GH-S
DEFA
VEX-P
VEX-S