check out how many ways we’ve found to build a … files/publication1-vortex.pdf · we took a...
Post on 12-Aug-2018
216 Views
Preview:
TRANSCRIPT
Easy to Install and Maintain • No tank vent required - vents with house plumbing ventilation
( s o no clogging or odors ) . • Aluminum motor mount makes a much lighter pump. • Free-standing pump - no troublesome platforms or fixed
discharge piping. • Flexible discharge with quick disconnect fitting and ball valve in
tank. • 1-1/4 ” discharge at 24 ” below grade for easy installation.
Smart Controls - Reliable and Safe • Level control is accomplished by a 2 or 3 float system • All electrical controls outside of the pump housing and in the
panel box - eliminates failures due to condensation and corrosion.
• LED level control indicators in the panel box highlight on/off and alarm status. Pressure switch controlled systems require ventilation for the tank and motor cavity thus allowing unwanted and excessive condensation build up. Vortex is completely submersible, eliminating that failure causing condensation build up. Additionally, Vortex places the motor contactor in the control panel for ease of replacement rather than in the pump cavity.
• Meets NEMA 4X standards for superior corrosion and water resistance.
• Thermal magnetic breakers and motor contactor in panel for better protection.
• PLC for tracking cycle counts and pump run time available on request.
• All controls are solid state.
One of the Highest Pressure Pump Curves in the Market The V-2000 produces one of the highest dynamic heads today. Period. Why take a chance on marginal performance? The V-2000 gets the job done. It ’ s also nice to know that every Vortex pump is thoroughly tested - and ships with its own certified pump curve document.
Rugged “Built-to-Last” Construction • Precision-balanced components mean less wear, less
maintenance. • Efficient “ progressive cavity ” technology handles suspended
solids without risk of over-pressurization or clogging. • All bolts Loc-TiteTM protected. • The entire unit is UL approved. • Four hardened stainless steel cutter teeth can process a wide
range of waste materials. • Custom stainless steel rotor and stator - designed specifically
for wastewater use. • Redundant seal between motor and pump housing.
Check Out How Many Ways We’ve Found to Build a Better Grinder Pump
Packages Available • Simplex with standard 24 ” x ( desired height )
fiberglass basin.
• Simplex with optional 30 ” x ( d esired height ) f iber-
glass basin, which increases storage between cycles.
• Duplex with any size fiberglass basin.
The V-2000 is a great value - more smart pump technology for less
We took a promising, established
pump design and spent three years
improving i t through research,
redesign and testing. As a
result , the V-2000 is a pump
based on proven technology
that outperforms, out lasts and
requires less maintenance.
The “progressive cavity”
design alone is far more
eff icient and rel iable than
the tradit ional centr ifugal
pumping method.
The V-2000 is the pump
you’l l want to trust for
your next low pressure
project - whether you’re
retrofitt ing an old centrifugal
pump system or building an
entire community.
Vortex Uses a Pitless Adapter System For Discharge
When using a platform tank and “U” tube connector, the discharge is controlled by a fixed distance from the bottom of the tank. When installation necessitates a deep tank, the discharge force main is unnecessarily deep. This, in turn, creates unnecessary trench load on the discharge connection. Consequently breakage of discharge connection pieces are undesirably common. In short, i t is poor engineering to bury your force main more than climate dictates.
7109 Industrial Dr. Owings, MD USA 20736
Phone 410 - 257-5130
Fax 410-257-9641
sales@vortexpump.com www.vortexpump.com
FLEX HOSE
The Next Generation The Next Generation The Next Generation
Low Pressure Low Pressure Low Pressure
Sewage Grinder Sewage Grinder Sewage Grinder
Pump Pump Pump
V-2
00
0 P
rog
res
siv
e C
av
ity
Gri
nd
er
Pu
mp
top related