cfrg adapter harness for garmin - j&m corp · cfrg adapter harness for garmin zumo-660/665...
Post on 10-May-2018
219 Views
Preview:
TRANSCRIPT
CFRG AdapterHarness for
Garmin Zumo-660/665
Installation & OperatingInstructions
© 2
010 J
&M
Cor
pora
tion.
All
right
s re
serv
ed.
11/1
0
Part #CFRG-ZUMO660
black wire—ground connection
Zumo 660/665 Power Cable & Audio Harness(Not Included)
Zumo 660/665 Cradle(Not Included)
black2-pinplug
red4-pinplug
J&M CFRGIntegration
Terminal
J&M CFRG-ZUMO660
black 2-pinplug (to Radar)
red wire—power connection forZumo 660/665
radar connection harness
Installation
1. Mount the CFRG-ZUMO660 adapter harness black box in close proximity to your J&M CFRG unit. Take into account the length of wiring harness available to make proper connections.
2. Using the supplied butt-style connectors, connect your ZUMO 660 power harness to the red and black wires from the CFRG-ZUMO660 adapter harness. Plug the 2.5mm mono and the 3.5mm stereo plugs from the adapter harness into your Zumo 660 or Zumo 665 Harness. (See Diagram)
3. Locate the black 2-pin radar power connector from your J&M CFRG unit. (Refer to J&M CFRG instructions) Plug the corresponding black 2-pin connector from the CFRG-ZUMO660 Adapter Harness into the black 2-pin connector from the CFRG integration terminal. (See Diagram)NOTE: If you are using a radar detector and it is connected to the black 2-pin connector from the CFRG unit, simply plug the black 2-pinconnectors from the CFRG-ZUMO660 adapter harness in-line between the black 2-pin connector from the CFRG unit and the black 2-pin connector on your radar power cable.
Thank you for the confidence you have shown by purchasing one of J&M’s innovative products. If you have any questions during installation, or require furtherassistance, you may call us at 1-800-358-0881 from 8:00 a.m. to 5:00 p.m.Mountain Standard Time, Monday through Friday.
Tucson, Arizona, U.S.A.
Tel: (800) 358-0881
Website: http://www.jmcorp.com
E-mail: audio@jmcorp.com
4. Locate the red 4-pin female connector from the J&M CFRG unit. Plugthe red 4-pin male connector from the CFRG-ZUMO660 Adapter harnessinto the red 4-pin female connector from the CFRG integration terminal.(See Diagram) NOTE: If you already have a cell phone connection har-ness connected to the red 4-pin connector on the GFRG unit, it mustbe disconnected and removed as it will no longer be used.
Operation - Cell Phone
This adapter harness utilizes the available Bluetooth cell phone linkthrough the Zumo 660/665 for hands free cell phone operation for the driver’s helmet headset.
Operation - GPS Audio
Refer to your ZUMO 660/665 instructions for volume control/adjustments.
top related