cetta 50 cetta 80 cetta 80 flexi - sundex · exterior blinds cetta 50 cetta 65 cetta 80 cetta 80...
Post on 14-May-2018
218 Views
Preview:
TRANSCRIPT
Exterior blindsCetta 50Cetta 65Cetta 80Cetta 80 Flexi
ENExterior blinds CETTA 80 FLEXI
Note: for motorized Cetta 50 blinds the packet height (in its packaged state) is about 40 mm larger
Note: for motorized Cetta 65 blinds the packet height (in its packaged state) is about 20 mm larger
Note: for motorized Cetta 80 blinds the packet height (in its packaged state) is about 20 mm larger
Note: for motorized Cetta 80 Flexi blinds the packet height (in its packaged state) is about 20 mm larger
Packet height Cetta 50
Packet height Cetta 65
Packet height Cetta 80
Packet height Cetta 80 Flexi
Isotra a.s.
Bílovecká 2411/1, 746 01 Opava, Czech Republic
Phone: +420 553 685 111, Fax: +420 553 685 110, E-mail: isotra@isotra.cz
www.isotra.cz
05/2010
Blind height (in mm) 500 510-700 701-1000 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000
Packet height (in mm) 75 85 105 110 120 130 140 150 160 180 200
Blind height (in mm) 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000 3010-3250 3260-3500 3510-3750 3760-4000
Packet height (in mm) 200 220 240 250 270 290 310 320 340 360 380 400
Blind height (in mm) 1010-1250 1260-1500 1510-1750 1760-2000 2010-2250 2260-2500 2510-2750 2760-3000 3010-3250 3260-3500 3510-3750 3760-4000
Packet height (in mm) 160 180 200 220 230 250 270 290 300 320 340 360
Blind height (in mm) 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000
Packet height for operating steel cable (in mm) 125 128 135 140 147 154 161 168 175 181 188 195
Packet height for operating guide rails (in mm) 121 140 150 161 171 182 192 203 213 223 232 245
Ladder cord
72 x 85 mm, polyester, weather and UV ray-
durable
Textile flat cord
8 mm in width, grey, made from special cloth
ensuring increased stability, weather and
UV-ray durability
Side guide channels
- steel cable coated in protective plastic
- aluminum moulding, surface size 20 x 21 mm
anodized aluminum or in available in colors
listed in the RAL catalogue, aluminum anchor
plates, clips available in plastic or steel
CETTA 80 FLEXI BLIND DESCRIPTION
Head rail
56 x 58 mm, made from primed, galvanized steel
plates (measuring 0.6 mm in thickness) or from
extruded aluminum
Bottom rail
83 x 13 mm, made from primed, galvanized steel;
surface material: coated in anodized aluminum or
available in colors listed in the RAL catalogue
Slats
made from adjustable aluminum alloy, surfaces cov-
ered with durable paint, 65 mm in width, (for Cetta
65), 80 mm in width (for Cetta 80) available in colors
listed in the Isotra a.s. catalogue
DESIGN OPTIONS
Double-tilt slats - DUO SYSTEM
enables tilting of the upper and lower slats resulting in
many options for shading unwanted light, suitable for
use in home offices, living rooms or conference rooms.
There are 3 setting options with double-tilt slats: the
upper part of the blinds may be left closed, the lower
part may be closed, or the entire blind may be closed.
Standard measurements
Min. width: 600 mm
Max. width: 4000 mm
Max. height: 4000 mm
Max. guaranteed
surface:
8 m2 (for manually controlled blinds)
16 m2 (for motorized blinds)
Design options for Cetta 80 Flexi
Controls Head rail position direction Control panel placement Gearbox Operation
rod up / down right / left x x
Motor up / down - - x
Front covers
Protect blind from strong wind
Blinds are packaged compact to reduce shipping height.Slats retain C-shape at both ends
BLIND CONTROL
Crank
for manual manipulation of blinds and
slats
Motor
mounted in the head rail, 230V/50Hz power
supply, torque 3 – 20 Nm, power consumption
90 – 210 W, options for solar / wind power, op-
tions for:
remote control
switch
We do not manufacture atypical sizes for exterior blinds.
For atypical size requests, please consult with the manufacturer!
Exterior blinds Cetta 65, Cetta 80Exterior blinds CETTA 50
Exterior blinds Cetta 50, Cetta 65, Cetta 80, Cetta 80 – FlexiAn optimal solution for outdoor shading
Our brand symbolizes a long tradition of the Isotra corporation, enormous
investments into our own development, the use of quality materials,
technological advances, quality work from hundreds of staff members, and a
long line of additional parameters that combine to create our final product.
EXTERIOR BLINDS = ISOTRA QUALITY = VARIOUS OPTIONS = 3 YEAR GUARANTEE = THERMOREGULATION
▲ Distinct thermoregulation and protective properties
▲ Outdoor noise reduction
▲ Recommended for window frames, window jambs (for newly-
constructed buildings) or facades (with additional mounts)
Cetta 50Cetta 65Cetta 80
Cetta 80 FLEXI
All components are made with highly
durable materials ensuring long-term
reliability in outdoor environments.
All components are made with highly
durable materials ensuring long-term
reliability in outdoor environments.
Cetta 50, Cetta 65 a Cetta 80 exterior blinds
provide optimal technological solutions and
top quality construction making them one of
the most credible components of their kind.
These blinds are perfect for large production
halls, supermarkets, public buildings or priva-
te residences.
CETTA 50 BLIND DESCRIPTION
Head rail
40 x 40 mm, made from primed, galvanized steel
plates measuring 0.5 mm in thickness. For moto-
rized blinds, head rails are 56 x 58 mm.
Bottom rail
49 x 12 mm made from primed, galvanized steel
plates measuring 0.5 mm in thickness; C - shaped
Side covers for head rail and bottom rail
Made from high quality transparent plastic.
Note: For cord-operated blinds, the side cover is only
on one side of the rail. For motorized blinds, covers
are not used. Bottom rails always come with covers.
Slats
made from adjustable aluminum alloy, surfaces
covered with durable paint, 50 mm in width, avai-
lable in colors listed in the Isotra a.s. catalogue
Ladder cord
42 x 54 mm, polyester, weather-durable, avai-
lable in grey
Textile flat cord
6 mm in width, grey, made from special cloth
ensuring increased stability, weather and
UV-ray durability
Side guide channels
steel cable coated in protective plastic with holes
punched for manipulation (comes with PVC co-
vers), clips available in plastic or steel
CETTA 65 NAD CETTA 80 BLIND DESCRIPTION
Head rail
56 x 58 mm, made from primed, galvanized steel
plates (measuring 0.6mm in thickness) or from
extruded aluminum
Bottom rail
67 x 13 mm (for Cetta 65), 83 x 13 mm (for Cetta
80) made from primed, galvanized steel; surface
material: coated in anodized aluminum or avail-
able in colors listed in the RAL catalogue.
Slats
made from adjustable aluminum alloy, surfaces
covered with durable paint, 65 mm in width, (for
Cetta 65), 80 mm in width (for Cetta 80) available
in colors listed in the Isotra a.s. catalogue
Ladder cord
58 x 70 mm (for Cetta 65), 68 x 85 mm (for Ce-
tta 80), polyester, weather and UV ray-durable
Textile flat cord
8mm in width, grey, made from special cloth
ensuring increased stability, weather and
UV-ray durability
Side guide channels
- steel cable coated in protective plastic
- aluminum moulding, surface size 20 x 21 mm
anodized aluminum or in available in colors
listed in the RAL catalogue, aluminum anchor
plates, clips available in plastic or steel.
Standard measurements
Min. width: 600 mm
Max. width: 4000 mm
Max. height: 4000 mm
Max.
guaranteed
surface:
8 m2 (for crank-controlled blinds)
16 m2 (for motorized blinds)
BLIND CONTROL
Cord
made from 4.5 mm, top quality trevira;
enables the fastest possible manipulation
of blinds, best-suited for smaller models,
available in black and white
Crank
for manual manipulation of blinds and
slats (available in color combinations of
white and gray)
Motor
mounted in the head rail, 230V/50Hz power
supply, torque 3 – 20 Nm, power consumption
90 – 210 W, options for solar / wind power,
options for:
remote control
switch
BLIND CONTROL
Crank
for manual manipulation of blinds and
slats (available in color combinations of
white and gray)
Motor
mounted in the head rail, 230V/50Hz power
supply, torque 3 – 20 Nm, power consumption
90 – 210 W, options for solar / wind power,
options for:
remote control
switch
DESIGN OPTIONS
Double-tilt slats - DUO SYSTEM
enables tilting of the upper and lower slats result-
ing in many options for shading unwanted light,
suitable for use in home offices, living rooms or
conference rooms.
There are 3 setting options with double-tilt slats:
the upper part of the blinds may be left closed,
the lower part may be closed, or the entire blind
may be closed.
Bottom part of blind closed
Standard measurements
Min. width: 400 mm
Max. width: 3150 mm
Max. height: 3000 mm
Max.
guaranteed
surface:
6 m2 (for cord-controlled blinds)
8 m2 (for crank-controlled blinds)
10 m2 (for motorized blinds)
top related