cell volume calculator · 2019. 1. 23. · all eflo and thermaflo anilox engravings measured with...

nilox658010012014015016518020022025028030033036040044050055060066070080090010001100120013001400150016001700180019002000

25304050556065708085100110120130140160180195220240260275315355390430475510550590630670705745785

Anilox Cell VolumeEFLO™

• High Performance Anilox

• Consistent Quality

• Increased Ink Transfer

• Higher Solid Coverage

• Improved Doctorblade Life

• Cleaner Highlights

• Low Dot Gain

• Designed to run at faster press speeds

Range

Range

Anilox Cell Volume™

• BELOW OPTIMUM VALUES AND ABOVE MAXIMUM VALUES CAN BE ACHIEVED FOR SPECIAL APPLICATIONS — TALK TO YOUR PGG REPRESENTATIVE

• LINE COUNTS OUTSIDE THIS RANGE MAY BE POSSIBLE – SEE YOUR PGG REPRESENTATIVE

• ALL VOLUMES CERTIFIED BY PAMARCO CELLBASE READING

Anilox Screen LPI L/cm

• Solid state multi-hit fiber optic technology

• Improved resistance to doctor-blade scoring due to surface hardness of ceramic

• Extended volume ranges due to multi-hit technology

Range

BCM

Range

BCM

cm3/m2

cm3/m2

LPI L/cm ThermaFlo™

6580

100120140150165180200220250280300330360400440500550600660700800900

10001100120013001400150016001700180019002000

25304050556065708085

100110120130140160180195220240260275315355390430475510550590630670705745785

54.2-83.751.4-72.041.2-62.034.1-57.329.4-54.227.1-48.824.8-44.222.4-38.720.1-32.519.4-27.916.3-21.714.7-20.313.6-18.913.1-18.311.6-16.310.8-13.69.92-12.48.2-10.57.6-9.9

7.13-9.16.2-8.25.7-7.64.9-6.24.5-5.64.0-5.13.3-4.63.2-4.22.9-3.72.6-3.22.3-2.92.2-2.72.1-2.62.0-2.41.9-2.31.9-2.3

50.0-64.540.6-52.432.5-41.827.1-34.823.2-29.921.7-28.719.7-27.018.0-24.616.3-21.414.7-20.213.5-18.611.8-16.39.9-13.89.3-12.88.2-11.27.4-10.27.0-9.85.9-8.45.3-7.44.6-6.34.2-5.93.8-5.43.4-5.03.2-4.52.8-3.72.5-3.22.2-2.81.9-2.51.7-2.31.5-2.21.4-2.11.3-2.01.3-2.01.2-1.91.2-1.9

All volumes are measured in cm3/m2

Cell Volume Calculator

nilox

niloxPlate Screen to Anilox ScreenCalculator

1820222628343842485154596980

455055657085100110120133140150175200

140160175210225275300330360400420470540610

35040045053057070076084091510201070120013701550

110115130150160195225255275290300330390440

2802903303804005005706507007407608409901120

90100105120130160180200220230250265310360

230250270300330400450500560580640670790920

707580100105130150160180190200210240280

180190200250260330380400450480500530610710

505560707590105115125135140160175200

120140150180185230270290320340350400450510

Plate ScreenL\cm LPI

Anilox Screen1% Dot

Anilox Screen2% Dot

Anilox Screen3% Dot

Anilox Screen5% Dot

Anilox Screen10% Dot

PRECISION • CONSISTENCY • PERFORMANCE • SERVICE

Anilox Screen for 10% or greater dot 10%

LPI

L/cm

Anilox Screen for minimum 5% dot 5%

LPI

L/cm

Anilox Screen for minimum 3% dot 3%

LPI

L/cm

Anilox Screen for minimum 2% dot 2%

LPI

L/cm

Anilox Screen for 1% or less dot 1%

LPI

L/cm

455055657085

100110120133140150175200

1820222628343842485154596980

Plate Screen LPI L/cm

INSTRUCTIONS Find your Plate Screen (above left). Determine the Minimum Dot Percentage you will image (<1%>10%). The resulting number is your Recommended Anilox Line Screen.

NOTE These are general recommend-ations for minimum anilox roll cell counts at 60° angle. Many variables affect performance including anilox ink release characteristics, ink characteristics, printing speed, atmospheric conditions, and type of stock. Your results may vary depending on these conditions.

All EFLO and THERMAFLO Anilox engravings measured with CellBase interferometric technology.

TM TM

TM

New Cut Lane Industrial EstateWoolston, WarringtonCheshire WA1 4AQUnited Kingdom+44 (0) 1925 456789anilox@pamarco.comwww.pamarco.com

www.pamarco.com

www.pamarco.com

Tel: +44 (0) 1925 456789 anilox@pamarco.com

• Ceramic Anilox Rolls• Ceramic Anilox Sleeves

• Chrome Anilox Rolls• Glue & Metering Rolls

• Coating Rolls• Mechanical Repairs

• Re-Engraves• Anilox Audits

• Anilox Cleaning and Supplies• Technical Advice and Training

EFLO™ THERMAFLO™ EFLO™UV

nilox