cell volume calculator · 2019. 1. 23. · all eflo and thermaflo anilox engravings measured with...
TRANSCRIPT
nilox658010012014015016518020022025028030033036040044050055060066070080090010001100120013001400150016001700180019002000
25304050556065708085100110120130140160180195220240260275315355390430475510550590630670705745785
Anilox Cell VolumeEFLO™
• High Performance Anilox
• Consistent Quality
• Increased Ink Transfer
• Higher Solid Coverage
• Improved Doctorblade Life
• Cleaner Highlights
• Low Dot Gain
• Designed to run at faster press speeds
Range
Range
Anilox Cell Volume™
• BELOW OPTIMUM VALUES AND ABOVE MAXIMUM VALUES CAN BE ACHIEVED FOR SPECIAL APPLICATIONS — TALK TO YOUR PGG REPRESENTATIVE
• LINE COUNTS OUTSIDE THIS RANGE MAY BE POSSIBLE – SEE YOUR PGG REPRESENTATIVE
• ALL VOLUMES CERTIFIED BY PAMARCO CELLBASE READING
Anilox Screen LPI L/cm
• Solid state multi-hit fiber optic technology
• Improved resistance to doctor-blade scoring due to surface hardness of ceramic
• Extended volume ranges due to multi-hit technology
Range
BCM
Range
BCM
cm3/m2
cm3/m2
LPI L/cm ThermaFlo™
6580
100120140150165180200220250280300330360400440500550600660700800900
10001100120013001400150016001700180019002000
25304050556065708085
100110120130140160180195220240260275315355390430475510550590630670705745785
54.2-83.751.4-72.041.2-62.034.1-57.329.4-54.227.1-48.824.8-44.222.4-38.720.1-32.519.4-27.916.3-21.714.7-20.313.6-18.913.1-18.311.6-16.310.8-13.69.92-12.48.2-10.57.6-9.9
7.13-9.16.2-8.25.7-7.64.9-6.24.5-5.64.0-5.13.3-4.63.2-4.22.9-3.72.6-3.22.3-2.92.2-2.72.1-2.62.0-2.41.9-2.31.9-2.3
50.0-64.540.6-52.432.5-41.827.1-34.823.2-29.921.7-28.719.7-27.018.0-24.616.3-21.414.7-20.213.5-18.611.8-16.39.9-13.89.3-12.88.2-11.27.4-10.27.0-9.85.9-8.45.3-7.44.6-6.34.2-5.93.8-5.43.4-5.03.2-4.52.8-3.72.5-3.22.2-2.81.9-2.51.7-2.31.5-2.21.4-2.11.3-2.01.3-2.01.2-1.91.2-1.9
All volumes are measured in cm3/m2
Cell Volume Calculator
nilox
niloxPlate Screen to Anilox ScreenCalculator
1820222628343842485154596980
455055657085100110120133140150175200
140160175210225275300330360400420470540610
35040045053057070076084091510201070120013701550
110115130150160195225255275290300330390440
2802903303804005005706507007407608409901120
90100105120130160180200220230250265310360
230250270300330400450500560580640670790920
707580100105130150160180190200210240280
180190200250260330380400450480500530610710
505560707590105115125135140160175200
120140150180185230270290320340350400450510
Plate ScreenL\cm LPI
Anilox Screen1% Dot
Anilox Screen2% Dot
Anilox Screen3% Dot
Anilox Screen5% Dot
Anilox Screen10% Dot
PRECISION • CONSISTENCY • PERFORMANCE • SERVICE
Anilox Screen for 10% or greater dot 10%
LPI
L/cm
Anilox Screen for minimum 5% dot 5%
LPI
L/cm
Anilox Screen for minimum 3% dot 3%
LPI
L/cm
Anilox Screen for minimum 2% dot 2%
LPI
L/cm
Anilox Screen for 1% or less dot 1%
LPI
L/cm
455055657085
100110120133140150175200
1820222628343842485154596980
Plate Screen LPI L/cm
INSTRUCTIONS Find your Plate Screen (above left). Determine the Minimum Dot Percentage you will image (<1%>10%). The resulting number is your Recommended Anilox Line Screen.
NOTE These are general recommend-ations for minimum anilox roll cell counts at 60° angle. Many variables affect performance including anilox ink release characteristics, ink characteristics, printing speed, atmospheric conditions, and type of stock. Your results may vary depending on these conditions.
All EFLO and THERMAFLO Anilox engravings measured with CellBase interferometric technology.
TM TM
TM
New Cut Lane Industrial EstateWoolston, WarringtonCheshire WA1 4AQUnited Kingdom+44 (0) 1925 [email protected]
www.pamarco.com
www.pamarco.com
Tel: +44 (0) 1925 456789 [email protected]
• Ceramic Anilox Rolls• Ceramic Anilox Sleeves
• Chrome Anilox Rolls• Glue & Metering Rolls
• Coating Rolls• Mechanical Repairs
• Re-Engraves• Anilox Audits
• Anilox Cleaning and Supplies• Technical Advice and Training
EFLO™ THERMAFLO™ EFLO™UV
nilox