catalogo geral

®

CATALOGOGERAL

PROFISSIONALISMO EM MOVIMENTO

EQUIPAMENTOS PARA VEÍCULOS C O M E R C I A I S

1

The Fami GroupThe history

What is Store VanThe product

Safety3D drawing systemOur service partners

Floorings and LiningsFast Line

Roof and Ladder rackLoading rampAccessoriesTool cases

INDEX

2-34-56-78-910-1112-1314-15

16-1920-3738-4546-4950-6162-65

2

The Fami Group head office has 250 employees andconsists of a number of production divisions operatingin an area of 200.000 square metres, 86.000 ofwhich are covered. Fami has foreign subsidiaries inGermany, Switzerland, Poland and Austria, and au-thorised distributors all over Europe, in South EastAsia, the Middle East and Latin America. Every year, Fami uses eight million kilos of ironand steel and two and a half million kilos of plastic. All the production takes place in-side the group, with a division exclusively dedicated to the production and the moul-ding of the plastic items.Fami is a consolidated operator on the international market, thanks to the flexibilityand the quality of the products, with definite targets of international development.

The Fami products manufactured for internal and external industrial uses areamong the most evolved and innovative on the market. Fami dedicates a signifi-cant amount of time and energy to research, carried out by a team of internalspecialists who make use of the most advanced technology. The safety andquality of each single Fami product enables to satisfy the most complex re-quirements of the most advanced industries, as a result of which the group isone of the most important in its sector. Fami is highly attentive to the ecolo-gical impact of the used technology. Consequently, the entire productionprocess is certified to guarantee the reliability of the products and the effi-ciency of the company organisation.The plant and raw materials are regularly renewed and selected to gua-rantee maximum compliance with the anti-pollution regulations. Amongthe company plant is a plastic recycling system.

®

THE FAMI GROUP

3

4

Fami was established in 1929. The name stands forFABBRICA ACCESSORI MOBILI INDUSTRIALI (In-dustrial Accessory and Furnishing Manufacture), andits products include metal and plastic furnishings forworkshops, industrial systems and storage. In theseventies, while the industrial development wasgrowing, Fami entered the foreign markets, with the setting up of working relationshipswith French and Swiss companies. These were important years for the development ofthe company. As a result of the intuition of its owner, Mario Milani, Fami innovated anddiversified its products, which soon turned out to be a successful formula for fast,profitable progress. The company’s success is based on its carefully achieved flexi-bility, which has enabled to offer customised systems which are able to satisfy all cu-stomers’ requirements.

The radical change which has taken place is due to the adoption of plastic, whichis lighter, more modern and easier to handle than metal, and with which the com-pany produces polypropylene boxes and containers. The company has grown,developed and been transformed with the production of a full range of acces-sories for industrial installations, including: boxes, shelvings, cabinets, tool hol-ders and trolleys. The company began to make a name for itself through thefirst sector trade fairs, which were an ideal promotion vehicle and occasionfor reaching business agreements beyond the Italian borders. FAMI SPAwas established in 1980. Intense technological evolution made it possibleto transform the workforce into specialist technicians, while a significantpart of the production process was automated to create an avant-gardeorganisation.

Today, the company with its 200,000 square metres of space is runalong managerial lines, passed on from one generation to the next,and is in a leading position on the international market.

THE HISTORY

5

6

Store Van is a brand of the Fami Group which was founded in 2003 to respond to a very pre-cise market requirements the fitting out of commercial vehicles.Store Van, with its design and production departments, is as innovative as Fami, whose phi-losophy and managerial approach it shares. Store Van operates all over Italy and Europe,and has set its sights on coordinated expansion. Store Van is a young division which car-ries on the traditions and guarantees the reliability of a major organisation. As a brand ofthe Fami Group, the flexibility of its products is a source of pride within the industrialgroup and helps ensure its position as a valid partner for its customers.

Increased production efficiency and high quality yield are of great importance for allcompanies, and it’s in this light that Store Van offers its range of accessories for thefitting out of commercial vehicles. Store Van studies, designs and manufactures theproducts and fits out all the interior spaces, making use of accessories speciallymade to measure for all types of requirement.

WHAT IS STORE VAN

7

8

THE SOLUTIONSThe products that bear the Store Van name are the result of careful, meticulous design workand a thorough awareness of the requirements of those who use commercial vehicles onan everyday basis. Store Van offers a range of accessories in which the maximum atten-tion is paid to detail, with a view to making working life simpler. The products are the re-sult of our many years of experience and technological skills.Store Van designs workshops on wheels, and adapts its full range of accessories toevery kind of layout.

MAKING THE MOST OF SPACEAll the Store Van solutions are designed to make the most of space, simplify move-ment and make sure that the materials are immediately within reach. In this way, it’spossible to save time and space, with your tools and accessories securely stowedaway, just where you want them.

QUALITY AND DESIGNAll the Store Van modules are made of high quality materials. The structures aretested and we combine steel, plastic and aluminium to offer maximum safetyand stability, lightness and design quality, with noise levels reduced to the mi-nimum. Standard fittings are available in assembly kits for the fitting out of alltypes of commercial vehicles from estate cars to large vans.

SPECIAL ASSEMBLYStore Van makes use of a special fixation process that reduces installationtimes and makes it possible to transfer the fittings from one vehicle toanother.

THE PRODUCT

9

10

CRASH TESTECE-R17

As far as the law is concerned, a van in whichtools and spare parts are carried and materialsare transported is a workplace. The safety re-gulations are comprehensive and cover a largenumber of aspects, and this means that ve-hicle owners have to be able to rely on ex-perienced, precise professionals. Theregulations in force on the safety of vehi-cles as workplaces are strict.

Store Van personnel knows these rules well, and all our products are designedusing materials and methods that take the ergonomic aspects of specific opera-tions into account. Our products bear the CE mark, where required.

CRASH-TEST with impact at 50 Km/h:

SAFETY

11

CRASH TESTECE-R17

CRASH TESTECE-R17

12

All fittings proposed to customers are accompanied by 3D drawings of the specific van modeland of the relevant fitting; in this way the interested user can see a realistic and high defini-tion simulation of the internal fitting down to the smallest detail.

Thanks to state-of-the-art software and the high professionalism of the program users injust a few minutes the inside of a van can be created and modified to meet customer re-quirements; endless solutions can be created to meet the working requirements of allthose categories that use a fitted van as part of their work.

3D DRAWING SYSTEM

13

14

The affiliated companies are responsible for the distribution of Store Van accessories andbranded products. These affiliates operate all over the Italian and European territory, wherethey offer standard or special layouts on an entirely autonomous basis.All the affiliates take part in the Store Van project in an innovative way, on the basis of thegroup’s philosophy, and have important business agreements with general management.

The assistance and constant updates we offer them ensure that the Store Van profes-sionals are highly skilled, and enable them to guide their customers in the selection ofproducts that comply with the regulations in force and offer maximum safety on theroad. As a result of these working relationships, Store Van is undergoing rapid growthon nearly all the European markets. The Fami group provides Store Van with solidsupport in its expansion, and helps it come up with special solutions and technolo-gies in accordance with the increasingly complex requirements emerging on the Ita-lian and foreign markets.

OUR SERVICE PARTNERS

Distributors

Subsidiaries

Production Plants

16

FLOORINGSAND LININGS

IMPACT RESISTANTAluminium profile forangles protection withstandard rounded edgeon the back and sideof the sliding door.

LIGHT4 mm thickhoneycombedpolypropyleneprotective linings.

QUICK INSTALLATIONThe floorings supplied are 9 mm/12 mmthick and in the case of very long vehiclesthey are divided into different sectionswith a special patented aluminium profilejoint for a perfect match when joiningthe sections together.

NO RIVETS, NO HOLESWhen the vehicle is suitable,the floorings are supplied withpolypropylene recessed eyelet fastners,screws and washers to fix the flooringto the vehicle’s original fixing points.

18

INTERNALPROTECTIONOF THE VAN

19

Flooringsand Linings

Pre-shaped loading floors in oneor more jointed pieceswith extruded aluminium inserts

Made of 9 mm/12 mm thick birch and conifer phenolicmulti-ply, resin-bonded on both faces and a wear-resistantand slip-proof surface treatment. Innovative patentedflexible connection system.

Protective linings

4 mm thick honeycombed polypropylene protectivelinings. Light and resistant.

Knurled aluminium

Both the floors and the linings can be made inslipproof knurled aluminium.

Perforated steel panel

To protect the windows of the van’s rear doors.

20

FAST LINE

GUARANTEEDSLIDING MOVEMENTDrawers on super smoothguides with openingand closing safety stops.

SAFE FIXINGInnovativealuminium barfixing systemof the modulesto the bodywork.

RESISTANT AND NOISELESSElements constructed with a highlyresistant and load bearing tubular system.Sound absorbent safety plastic elementsbetween the various metal parts.

ASSEMBLY SPEED,TOTAL MODULARITY25 mm height adjustmentof the various elements.

22

SPACEOPTIMISATION

23

2

3

4

5

1

1

2

4

5

3

Fast Line

Work tops

25 mm thick multi-ply beech work tops.Available for modules:Width: 508 / 717 / 1016 / 1225 mmDepth: 365 / 445 mm

Fully extractable drawerswith a 50 Kg to 80 Kg capacity

Easy and intuitive one hand opening with handleoperated opening and closing safety stop.Wide range of dividing options of the drawersby means of plastic or metal accessories.Available for modules:Width: 508 / 717 / 1016 / 1225 mmDepth: 365 / 445 mmDrawer front height: 75 / 100 / 125 / 150 / 200 mm

Hinged doors with floor fittingor shelf fitting

Easy and intuitive one hand handle opening.Available for modules:Width: 508 / 717 / 1016 / 1225 / 1524 mmUseful height: 225 / 400 mm

Available for modules:Width: 508 / 717 / 1016 / 1225 / 1524 mmUseful height: 350 / 400 mm

Available for modules:Width: 508 / 1016 / 1225 mmDepth: 365 / 445 mm

Extractable shelves for one or two tool caseswith the possibility of introducing tool caseswith different heights and depths

Lifting doors with assisted opening

24

SPACEOPTIMISATION

25

2

3

4

5

6

7

1

1

2

3

4

5

6

7

Fast Line

Top tray with aluminium divider

Available for modules:Width: 299 / 508 / 717 / 1016 / 1225 / 1524 / 1733 mmDepth: 265 / 365 / 445 mmFront height: 73 mmBack height: 73 mm

Shelves

Available for modules:Width: 508 / 717 / 1016 / 1225 / 1524 mmDepth: 265 / 365 mmFront height: 35 mmBack height: 100 mmAvailable with or without polypropylene containers

Trays with aluminium dividers

Available for modules:Width: 508 / 717 / 1016 / 1225 / 1524 / 1733 mmDepth: 265 / 365 / 445 mmFront height: 73 mmBack height: 146 mm

Drawers

See page 23

Fixed tool case holder for one or two cases

Available for modules:Width: 508 / 717 / 1016 / 1225 mmDepth: 365 / 445 mm

Connection bars with adjustable belt

Available for modules:Width: 508 / 717 / 1016 / 1225 / 1524 / 1733 mm

Telescopic tray with hinged side door

Available for modules:Width: from 1750 to 4000 mmDepth: 265 / 365 mmHeight: 90 mm

26

SPACEOPTIMISATION

27

Fast Line

Available for modules:Depth: 265 / 365 / 465 mm

Vices

Rotating steel vices with mechanical lock.Jaw width: 100 / 125 mm

Lifting vice benches with floor support

Extractable multi-ply beech vice benches

Possibility of adjusting the work bench in height.Top width: 240 / 340 mmDepth: 1150 mm

28

SPACEOPTIMISATION

29

Verticalretractablesystem

Vertical extractable system with combinedmodule including trays and shelves

Various types of combined modules can be applied tothe extractable system. Mechanical safety stop of theextractable element in opening and closing.

Useful height: 655 / 855 / 1055 mmDepth: 1234 mmExtension: 50% - load capacity 100 KgExtension: 75% - load capacity 75 Kg

30

SPACEOPTIMISATION

31

Horizontalretractablesystem

Horizontal extractable systems with extrudedaluminium guides and oil-resistant top

Safety stop of the top in opening and closing.The system can be blocked in any opening position.

Load capacity: 300 KgExtension: 60%

32

SPACEOPTIMISATION

33

Double levelfloor

Double level floor

100% drawer extraction. Wide range of dividing options ofthe drawers by means of plastic or metal accessories.

DRAWER TECHNICAL SPECIFICATIONS:Load capacity: 150 KgFront height: 50 / 75 / 100 / 125 / 150 / 200 mmUseful width: 906 / 1076 mmUseful depth: 600 mm

34

SPACEOPTIMISATION

35

Double level floorwith trapdoors

Double level floor with trapdoors

The raised level with trapdoor allows for maximisingvehicle load volume by approx. 95%. 100% drawerextraction. Wide range of dividing options of the drawersby means of plastic or metal accessories.Horizontal frame, extraction 60% load capacity 160 Kg.

DRAWER TECHNICAL SPECIFICATIONS:Load capacity: 150 KgFront height: 50 / 75 / 100 / 125 / 150 / 200 mmUseful width: 906 / 1076 mmUseful depth: 600 mm

36

SPACEOPTIMISATION

37

2

3

1

Crane

Revolving crane with positioning brakeand folding arm

Including 12 V motor and lifting hook sliding onan aluminium guide and electric limit switch,equipped with remote control with cable.

Load capacity: from 150 to 190 Kg

38

ROOF ANDLADDER RACK

PATENTED FIXINGCONNECTORSModular and specificfixing connectors to adaptthe structure of the ladder rackto the rounded shapeof the vehicle’s roof top.

ANTI-CORROSIONStructure entirelymade of aluminiumand stainless steel.

GUARANTEED SAFETYOn both the roof rack and ladder rackcarriage there is a load capacity label andboth products are GS - TÜV certified.

EASY TO USEThe hydraulic brakeand gas springs make the upand down movements of theAladin ladder rack carriageeasy and not heavy.

40

TO SAFELYTRANSPORTYOUR LADDER

41

2

3

1

4

Roof andLadder rack

Ladder rack series Aladin

Servo assisted lowering and lifting systemfor ladders up to 60 Kg.

42

TO SAFELYTRANSPORTYOUR LADDER

43

2

3

1

4

Roof andLadder rack

Ladder rack series Talento

Lowering system with brake for ladders up to 60 Kg.

44

TO SAFELYTRANSPORTYOUR LADDER

45

4

2

3

1

Roof andLadder rack

Ladder rack series Golia

Balanced system for ladders up to 60 Kg.

46

LOADINGRAMP

PERFECT BALANCINGGas springsfor easier openingand closing movements.

ADJUSTABLEFOOTThe feet are adjustablein height with rollersupport to adaptthe ramp to thevertical movementsof the vehicle.

FOR ALL REQUIREMENTSWide range of vehicle ramps for:FIAT, PEUGEOT, CITROËN,VOLKSWAGEN, MERCEDES, FORD,RENAULT, OPEL, NISSAN, IVECO.Load capacity from 600 Kg to 1500 Kg.

DOUBLE FIXINGLower fixing usingthe vehicle’s original fixing points;therefore it is not necessaryto drill holes. Upper fixing tostabilise and strengthen the structure.

48

1

THE SAFEST WAYTO ENTERTHE VEHICLE

49

2

3

4

Loadingramp

Connection to the vehicle by means of a telescopiccolumn and self-positioning feet. The assembly does notrequire any structural modifications to the body of thevehicle and the platform itself. Extremely fast assembly.

Load capacity: from 600 Kg to 1500 KgUseful surface width: from 800 to 1350 mmUseful surface length: from 2000 to 3000 mm

Servo assisted loading rampswith tubular steel structureand knurled slip-proof aluminium platform

50

ACCESSORIES

TOOL ACCESSORIES

ACCESSORIESFOR MODULES

LOAD SAFETY ACCESSORIES

ELECTRICAL ANDPNEUMATIC ACCESSORIES

52

ACCESSORIESFOR MODULES

53

3

5

2

4

1

2

3

1

4

5

Accessoriesfor modules

Spray-can holder kit

First aid kit

DIN A5 and DIN A4 document holder

Paper roll holder ∅ 140 mm / 240 mm

Painted aluminium cable saddlesavailable in three different sizes

54

55

9

7

8

6

8

9

6

7

Accessoriesfor modules

Hand washing kit

Can and can holder

Steel vices with revolving baseand jaws for pipes

Supports with belt for gas cylindersand extinguishers

56

ALL TOOLSWITHIN EASY REACH

57 57

3

1

2

3

4

5

1

4

2

5

Toolaccessories

15” Professional tool box

Dimensions: 400x210x210 mm (WxDxH)

Professional trolley with two 18” elements

Dimensions: 455x270x585 mm (WxDxH)

18” / 22” Professional tool box

Dimensions 18”: 445x265x250 mm (WxDxH)Dimensions 22”: 575x275x290 mm (WxDxH)

24” Professional tool box

Dimensions: 625x395x420 mm (WxDxH)

Tool hanging magnets

58

SUPPLEMENTARYPARTS TO IMPROVEPERFORMANCE

59

3

4

2

1

2

1

4

3

Electrical andpneumaticaccessories

220 V - 380 V Compressors

LED 24 V lighting systems

Multi-power unit for electricityand compressed air

Winding device for pneumaticand electrical systems

60

RESTRAINYOUR LOAD ANDTRAVEL SAFELY

61

4

32

1

2

3

1

4

Aluminium load restraining profiles

Aluminium load restraining sides

Load safetyaccessories

Profiled aluminium load restraining bars

Load restraining belts

62

TOOL CASES

EASY OPENINGOpening system detail.

SIDEPROTECTIONSFront and rearpolypropyleneprotection.

GREAT VISIBILITYCover open position (100°).

ERGONOMIC GRIPAnti-crush handle.

64

IDEAL FORSMALL PARTS

65

Steel casesempty or with boxes

Front and rear polypropylene protection.Anti-crush handle.Cover open position (100°).

Tool cases depth 292 mmTool cases depth 343 mmTool cases height: 67 / 102 mm

Tool cases

Carga de Trabalho, Unip. Lda.Tel.: 218048500 - Tlm.: 938720472/ 3E-mail: geral@cargadetrabalho.com

www.cargadetrabalho.com

www.famispa.comwww.storevan.com

®

O SEU PARCEIRO STOREVAN

PROFISSIONALISMOEM MOVIMENTO

www.cargadetrabalho.com