bill of quantities preamble -...
Post on 23-Oct-2020
25 Views
Preview:
TRANSCRIPT
-
Page 1 of 2
Bill of Quantities PREAMBLE
1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General
Conditions, Particular Conditions of Contract, Works Requirement (Technical Specifications, and Drawings).
2. The quantities given in the Bill of Quantities are estimated and provisional and are given to provide a common basis for bidding. The basis of payment will be the actual quantities
of work ordered and carried out including spares to be handed over to Railway, as
measured by the Contractor and verified by the Engineer and valued at the rates and
prices tendered in the priced Bill of Quantities, where applicable, and otherwise at such
rates and prices as the Engineer may fix within the terms of the Contract. If any
quantities which have been supplied by the contractor and paid by RVNL are
determined to be surplus by the Engineer (except those quantities which become
surplus due to change in planning/scheme by Railway/RVNL) during the progress
of the work or at the completion of the work, shall be taken back by the contractor,
and the payment made for such materials shall be recovered from the pending
claims. The materials which have become surplus due to change in
planning/scheme by Railways/RVNL and are still in usable condition shall be taken
over by RVNL and any part payment still to be made shall be released to the
contractor.
3. In the Bill of Quantities, quantity and unit rates and thereby the amount against each item have been indicated. From this, the estimated price of each bill has been worked out and
indicated in the summary sheet in BOQ. The Bidder shall quote rates as percentage
above/below/at par for each schedule in the summary sheet. If no percentage as above,
below or at par is indicated for any particular bill, the same will be considered as
percentage at par.
4. The rates for each bill shall be written in indelible ink or type written in the summary sheet against each bill, in both words and figures, while clearly indicating whether the
percentage quoted is above/below/at par over the estimated rate in the respective
columns. The price for each bill shall accordingly be calculated and written against each
bill in both words and figures. The total price, as the sum of prices of all bills shall be
shown at the bottom of the summary sheet. The total price shall also be written in both
words and figures.
5. General directions and descriptions of work and materials are not necessarily repeated or detailed in the Bill of Quantities. References to the relevant specifications and sections of
the contract documentation should be made before quoting rates in the Bill of Quantities.
6. The rates and prices Bid in the priced Bill of Quantities shall, except as otherwise provided under the Contract, include all construction equipment, plant, labour,
supervision, materials, erection, maintenance, insurance, profit, royalty, octroi, taxes and
duties, together with all general risks, liabilities and obligations set out or implied in the
-
Page 2 of 2
Contract.
7. The rates are deemed to be inclusive of all lead (except as otherwise specifically provided in the description of the particular item), lifts, ascend, descend, handling, rehandling crossing of nallah/streams/tracks any other obstructions.
8. All enabling works for executing the work e.g. approach road to site, launching arrangements, procuring right of way, arrangement of water and electricity etc is to be
arranged by the contractor at his own cost and deemed to be included in the quoted
rates.
9. Storage of Material: All the material at site will have to be properly stacked & stored so as to facilitate inspection. The material should be properly protected from the detrimental
effects of nature and fire, theft etc. The contractor shall be responsible for watch & ward
and any loss or deterioration on account of above shall lead to rejection of material and
contractor has to replace the same at his own cost.
10. The method of measurement of completed work for payment shall be in accordance with provisions in Works Requirements (Specifications) except as otherwise specifically
provided in the description of item or particular bill of quantities or explanatory notes to
the particular bill of quantities.
-
(A GOVT. OF INDIA ENTERPRISE)
9th Floor, 50, Chowringhee Road,
Kolkata – 700071
TENDER DOCUMENT
TENDER No: ERO/MMD/RVNL/810/1162 dated-11.08.2020
Tender for "Mechanical works comprising Supply, Erection, Testing &
Commissioning of Machinery & Plant in connection with construction of main line
EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”
VOLUME – III
Quoting Sheet
ENGINEERING PROJECTS (INDIA) LIMITED
-
In Figure In Words In Figure In Words
1 13-A
Supply, installation, testing and
commissioning of major machinery & plants8,23,72,459.68₹
2 13-B
Supply, installation, testing and
commissioning of other machinery and
plants pipeline and Storage racking system 1,87,13,831.36₹
3 13-C
Supply and commissioning of tools, gauges,
instruments & plants20,98,630.24₹
4 13-D
Supply and commissioning of office
equipment and furniture34,52,407.62₹
5 Total 10,66,37,329.00₹
Seal & Sign of Bidder
TENDER No: ERO/MMD/RVNL/810/1162 dated-11.08.2020
ENGINEERING PROJECTS (INDIA) LTD.
(A Govt. of India Enterprise)
Eastern Regional Office, Kolkata
Price Bid
Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant in connection with construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”
iii) The breakup of cost and levies such as GST and other Taxes considered in the above quoted prices should be submitted separately as per Annexure- I
Note: ii) Amount in figures and amount in words must be filled in the designated cell as depicted above.
Sl No. Description Estimated Project Cost
BIDDER'S PRICE
i) The quoted price by the bidder shall be inclusive of all taxes, duties, cess, levies, Fees, royalty etc. and Goods and Service Tax (GST).
Bill No. % QUOTE ABOVE /AT PAR/
BELOW
AMOUNT IN Rs.
(after considering percentage above, at
par or below)
-
Sl.No Bill No Description of Schedule Estimated Cost (Rs) Bidder's Price (Rs.)
1
13-A Supply, installation, testing and
commissioning of major machinery &
plants
8,23,72,459.68₹ -₹
2
13-B Supply, installation, testing and
commissioning of other machinery and
plants pipeline and Storage racking
system
1,87,13,831.36₹ -₹
3
13-C Supply and commissioning of tools,
gauges, instruments & plants20,98,630.24₹ -₹
4
13-D Supply and commissioning of office
equipment and furniture 34,52,407.62₹ -₹
Sub total Mechanical 10,66,37,328.90₹ -₹
ABSTRACT FOR MECHANICAL WORKS
Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant in connection with
construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”
TENDER No: ERO/MMD/RVNL/810/1162 dated-11.08.2020
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
A1 CNC under Floor Wheel Lathe (BG) 1.00 No 5,02,53,912.80 5,02,53,912.80 A2 EOT Crane 30T 2.00 No 97,05,287.20 1,94,10,574.40 A3 Rail cum road vehicle 350T 1.00 No 1,27,07,972.48 1,27,07,972.48
8,23,72,459.68
B1 Scissor lift 1T 4.00 No 8,27,825.60 33,11,302.40 B2 Air Compressor 500 cfm 1.00 No 17,20,222.56 17,20,222.56 B3 Fork Lift Truck 3T 1.00 No 11,97,912.80 11,97,912.80 B4 Scissor lift 4T 1.00 No 18,01,739.52 18,01,739.52 B5 Gas Chromatograph 1.00 No 10,22,608.16 10,22,608.16 B6 Platform Truck 2T 2.00 No 5,49,482.08 10,98,964.16 B7 Ultrasonic Flaw Detector 2.00 No 2,61,102.24 5,22,204.48 B8 Stacker 1T 1.00 No 10,10,432.64 10,10,432.64 B9 Portable Transformer Oil Filtration Plant 5000LPH 1.00 No 6,81,739.52 6,81,739.52
B10 Trolley mounted fire fighting equipment 2.00 No 2,72,695.36 5,45,390.72 B11 Trestle- one set comprising 4 trestles each designed for 15T
capacity as per schematic sketch no B13
2.00 Set 1,95,623.68 3,91,247.36
B12 Battery charging and discharging panel 1.00 No 3,70,366.08 3,70,366.08 B13 E-Loader 2.00 No 1,51,004.00 3,02,008.00 B14 Tester diagnostic insulation 5KV Motwane model 5K-PI or
similar with 3x10m test leads with large insulated clamps, RS
232 communication cable, Usb cable RS 232 to USB converter,
software CD & other standard accessories etc.
1.00 No 2,02,700.96 2,02,700.96
B15 Welding plant MMA 1.00 No 1,34,594.88 1,34,594.88 B16 Hand pallet truck 2500Kg Godrej model GPT 2500 or similar 4.00 No 22,410.08 89,640.32 B17 Pneumatic Pipeline with Accessories - - (a) 80 mm pipe with elbow, bends, T joints, nipples, reducers etc 1,050.00 m 1,333.92 14,00,616.00 (b) 25 mm pipe with elbow, bends, T joints, nipples, reducers etc 355.00 m 206.08 73,158.40 (c) Valve 80 mm 6.00 No 11,689.44 70,136.64 (d) Valve 25 mm 100.00 No 2,434.88 2,43,488.00 (e) QRC 25 mm 100.00 No 974.40 97,440.00 (f) Filter regulator 1" 100.00 No 8,396.64 8,39,664.00
BILL OF QUANTITIES FOR MECHANICAL WORKS
Total for Bill No 13A
Bill No 13A-Bill of Quantities for Mechanical Engineering Works
Bill No 13B- Supply, installation, testing and commissioning of other machinery and plants pipeline and Storage racking system
Page 4 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
(g) Auto drain valve 100.00 No 7,545.44 7,54,544.00 (h) Pressure gauge 8" 6.00 No 2,364.32 14,185.92 (i) Pneumatic Gun with Hose 15.00 No 340.48 5,107.20
B18 Storage Racking system (3 level) - - (a) Starter Bay 2.00 No 16,264.64 32,529.28 (b) Extension Bay 8.00 No 13,732.32 1,09,858.56 (c) Pallet Cage 80.00 No 8,375.36 6,70,028.80
1,87,13,831.36
C1 Drilling machine electrical 16 mm Bosch model GBM 1600 RE
professional or similar along with spare HSS drill bit(parallel)
set 3mm to 12mm.
2.00 No 8,064.00 16,128.00
C2 Drilling machine electrical 13 mm Bosch model GBM 13 RE
Professional or similar along with spare HSS drill bit(parallel)
set 3 mm to 12 mm.
2.00 No 4,382.56 8,765.12
C3 Grinder angle pneumatic heavy duty 4" disc dia Chicago
pneumatic model CP 7540-C or similar with inlet quick coupler
and one dozen 4" grinding wheels.
1.00 No 19,477.92 19,477.92
C4 Grinder angle pneumatic heavy duty 5" disc dia CP model
CP7550-A or similar with 05 grinding wheels, quick release
coupling & adopter etc.
1.00 No 58,434.88 58,434.88
C5 Grinder angle hand held 4" power spindle BOSCH model GWS
900-100 professional or similar with 05 grinding wheels 4"
make Bosch or similar.
2.00 No 2,749.60 5,499.20
C6 Cutter abrasive saw Bosch or similar 2400 W cutting capacity:
rectangle 85 mm x 180mm, Square 110 mm x 110 mm & L-
profile 130 mm x 130 mm No-load speed 3800 rpm grinding
disc diameter 355 mm grinding bore diameter 25.4 mm.
2.00 No 9,252.32 18,504.64
C7 Spanner set double open end set of 12 pieces TAPARIA model
DEP 12 or similar.
4.00 Set 548.80 2,195.20
C8 Spanner single open end with raised collar Taparia model SER
or similar for set of 6 pieces size 60, 65, 70, 75, 80, 85 mm.
4.00 Set 16,522.24 66,088.96
Total for Bill No 13B
Bill No 13C- Supply and commissioning of tools, gauges, instruments & plants
Page 5 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
C9 Spanner set double ended ring set of 12 pieces of size 6x7, 8x9,
10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27,
25x28, 30x32 mm TAPARIA model 1812 or similar.
5.00 Set 1,169.28 5,846.40
C10 Spanner set ring spanner deep offset pattern, GRIP-RITE
configuration model EVEREST or similar for set of 12 pieces of
size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22,
21x23, 24x26, 25x27, 30x32 mm.
8.00 Set 1,495.20 11,961.60
C11 Socket hexagonal set 12.7 mm TAPARIA model S-14HXL (22
sockets + 5 accessories) or similar.
4.00 Set 2,955.68 11,822.72
C12 Wrench adjustable TAPARIA model 1173N-12 or similar. 4.00 No 324.80 1,299.20 C13 Wrench pipe heavy duty TAPARIA model HPW 24 or similar. 4.00 No 1,435.84 5,743.36 C14 Wrench pipe heavy duty Taparia model HPW 18 or similar. 4.00 No 1,049.44 4,197.76 C15 Plier combination TAPARIA model 1621-8N or similar. 5.00 No 178.08 890.40 C16 Plier bent nose TAPARIA model BN- 06 or similar. 2.00 No 153.44 306.88 C17 Plier long nose Taparia model 1430-6 or similar. 2.00 No 155.68 311.36 C18 Plier circlip internal Taparia model 1444-7S or similar. 2.00 No 183.68 367.36 C19 Plier circlip external Taparia model 1443-7 or similar. 2.00 No 183.68 367.36 C20 Puller two legs forged from chrome vanadium steel arms links
chrome plated to IS 9193 of size 40 to 250 mm spread.
2.00 No 720.16 1,440.32
C21 Crimping tool set. 1.00 Set 2,92,174.40 2,92,174.40 C22 Wrench chain pipe TAPARIA model CPW 06 or similar. 4.00 No 3,841.60 15,366.40 C23 Wrench chain pipe TAPARIA model CPW 12 or similar. 2.00 No 8,512.00 17,024.00 C24 Hammer ball pein Taparia model WH 800 B/C or similar. 10.00 No 285.60 2,856.00 C25 Screw driver size 5 x 100 mm Taparia model 934 I or similar. 10.00 No 36.96 369.60 C26 Screw driver size 5 x 300 mm Taparia model 939 I or similar. 10.00 No 48.16 481.60 C27 Chisel octagonal Taparia model 102 or similar. 2.00 No 73.92 147.84 C28 Chisel octagonal Taparia model 105 or similar. 2.00 No 127.68 255.36 C29 Punch centre TAPARIA model 1986 or similar. 5.00 No 52.64 263.20 C30 Torque wrench 1" sq. drive Hytorc model BTST-1400ER or
similar.
2.00 No 28,896.00 57,792.00
C31 Torque wrench 3/4" sq. drive Hytorc model BTST-500DR or
similar.
2.00 No 9,826.88 19,653.76
C32 Torque wrench 1" sq. drive Hytorc model BTST-1000ER or
similar.
2.00 No 18,708.48 37,416.96
C33 Torque wrench 1/2" sq. drive Hytorc model BTST-250CR or
similar.
2.00 No 4,519.20 9,038.40
Page 6 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
C34 Torque wrench 1/2" sq. drive Hytorc model BTST-100CR or
similar.
2.00 No 3,797.92 7,595.84
C35 Torque wrench 3/8" sq. drive Hytorc model BTST-24BR or
similar.
2.00 No 2,658.88 5,317.76
C36 Torque wrench 3/8" sq. Drive Hytorc model BTST-100CR or
similar.
2.00 No 3,700.48 7,400.96
C37 Trolley for carry both DA and Oxygen gas cylinders Messer
three wheel cylinder trolley item code no 80830249 or similar.
1.00 No 10,615.36 10,615.36
C38 Trolley heavy duty hand operated capacity 500 kg platform size
of 500 mm x 800 mm mounted on two axles four solid rubber
wheels swiveling handle for turning trolley. Suitable support
shall be provided on side of the platform to height minimum
300 mm to handle paint drum etc.
2.00 No 13,147.68 26,295.36
C39 Pump water horizontal centrifugal portable type capacity 20
cum/hr ,head 22 MWC complete with electric motor of 3.7 KW
Mather and Platt model MISO 32-125 or similar.
2.00 Set 34,087.20 68,174.40
C40 Pump water self priming centrifugal monoblock, 1.0 HP, 220V,
260 LPH, complete with cable, DOL starter, suction and delivery
pipe 10 m, moveable trolley with canopy & starter stand.
2.00 No 28,730.24 57,460.48
C41 Pump submersible dewatering 1.75 HP Kirloskar model
ETERNA 1300BW or similar.
2.00 No 20,316.80 40,633.60
C42 Pump barrel motorised inlet 3/4", 230V single phase for
pumping diesel, kerosene, SAE90 lubricating etc.
2.00 No 20,316.80 40,633.60
C43 Micrometre digital external 0-150 mm MITUTOYO MODEL 340-
251-30 or similar.
1.00 No 29,972.32 29,972.32
C44 Micrometre digital external 150-300 mm MITUTOYO MODEL
340-252-30 or similar.
1.00 No 38,888.64 38,888.64
C45 Micrometre internal 5-30 mm MITUTOYO MODEL 145-185 or
similar.
1.00 No 8,302.56 8,302.56
C46 Vernier calliper outside 0-300 mm MITUTOYO MODEL 500-754-
10 or similar.
1.00 No 17,623.20 17,623.20
C47 Vernier height gauge digital 0-450 mm MITUTOYO MODEL 514-
104 or similar.
1.00 No 32,809.28 32,809.28
Page 7 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
C48 Tape steel 15 M measuring range make Freeman model
Freemans measures engineer long steel 13mm 15 M or similar.
2.00 No 282.24 564.48
C49 Tape steel 30 M measuring range make Freeman model
Freeman measures engineer long steel 13mm 30 M or similar.
2.00 No 458.08 916.16
C50 Tape steel 3 M measuring range Freeman model Freeman
measures 2 Lock 3Meters 16mm or similar.
5.00 No 50.40 252.00
C51 Tape stelel 5 M measuring range make Freeman model Hi-Matt
5M/19mm with Revolutionary End Hook or similar.
5.00 No 124.32 621.60
C52 Weighing digital scale 200 Kg, 0.6m x 0.6 m table accuracy 20
gm with LED display, inbuilt battery backup TULAMAN model
EPS 200kg or similar.
2.00 No 9,934.40 19,868.80
C53 Weighing spring balance 0-50 Kg, LC 0.5 Kg. 2.00 No 1,636.32 3,272.64 C54 Vice pipe TAPARIA model PV 04 or similar. 4.00 No 4,027.52 16,110.08 C55 Gauge digital wheel distance PIE model WG 1 (E) or similar. 2.00 No 45,140.48 90,280.96 C56 Gauge wheel defect (flat face 50mm, condemning thickness
22mm) PIE model TDG-1 or similar.
2.00 No 5,517.12 11,034.24
C57 Gauge digital wheel dia for MEMU as per PIE model WD-1(D) or
similar.
2.00 No 57,178.24 1,14,356.48
C58 Gauge buffer height for MEMU PIE model BHG-3 or similar. 2.00 No 24,075.52 48,151.04 C59 Gauge digital flange wear for MEMU PIE model FWG-1(D) or
similar.
2.00 No 18,558.40 37,116.80
C60 Gauge digital root wear for MEMU PIE model RWG-1(D) or
similar.
2.00 No 18,558.40 37,116.80
C61 Gauge tread wear for MEMU PIE model TWG-1 or similar. 2.00 No 13,040.16 26,080.32 C62 Lamp LED based 1000 lumen range (approx) rechargeable
Felix model. UC 30 or similar along with lanyard, holster, spare
O rings, USB charging cable, Battery, spare rubber switch boot
etc.
15.00 No 5,356.96 80,354.40
C63 Grease gun lever operated , chrome vanadium steel, pressure
bar length 320mm, dia 56mm and overall length
430mm(approx).
2.00 No 2,064.16 4,128.32
C64 Multimeter benchtop Metravi model M-3510A or similar with
standard test leads, power line cord, USB cable, USB & GPI B
remote control interfaces, software application CD etc.
2.00 No 60,488.96 1,20,977.92
Page 8 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
C65 Tester Insulation digital Motwane model i-12 or similar with
test leads set, test leads set with crocodile clips, carrying case,
main eliminator, batteries, fuse etc.
2.00 No 7,207.20 14,414.40
C66 Tester Insulation 1000 V hand driven WACO model WI - 1003/
Rishabh or similar.
1.00 No 6,204.80 6,204.80
C67 Tester insulation 500 V hand driven WACO model WI-502/
Rishabh or similar.
1.00 No 5,663.84 5,663.84
C68 Tester inter turn short circuit Metravi model Little giant or
similar along with all accessories, items, battery etc.
1.00 No 14,608.16 14,608.16
C69 Meter micro ohm bench top MOTWANE model LR2045-S or
similar with set of test leads with GP kelvin clip, set of test leads
with heavy duty crocodile clip, C clamp with long test leads, test
leads with heavy duty bond testing probes, USB interface cable,
protection fuses, main cord.
1.00 No 60,391.52 60,391.52
C70 Meter clamp AC/DC Fluke model 374 true rms AC/DC or
similar with AC220 alligator clip set, TP1 test probe (flat blade),
carrying case, C550 tool bag, TL75 test lead set etc.
1.00 No 43,433.60 43,433.60
C71 Meter Lux digital KUSAM-MECO model KM-LUX-200K or
similar with soft carrying case,light sensor, battery etc.
1.00 No 3,027.36 3,027.36
C72 Meter vibration digital METVARI model AVD-80 or similar with
accelerometer probe and carrying case.
1.00 No 28,730.24 28,730.24
C73 Meter anenometer digital thermo KUSAM-MECO model KM-909
or similar with battery, carrying case, probes etc.
1.00 No 6,665.12 6,665.12
C74 Meter LCR MECO model LCR999A or similar with short circuit
plate, 7.2V Ni MH rechargeable battery, 9V/150mA AC adaptor,
4-terminal kelvin test leads, SMD 4 terminal kevin test
tweezers, banana plugs-crocodile clip test leads, min USB
communication cable etc.
1.00 No 22,887.20 22,887.20
C75 Tachometer contact/Non-contact KUSAM-MECO model KM
2241 or similar with carrying case, surface speed test wheel,
cone & funnel RPM adapters, 2pcs of reflecting tape, AC adaptor
etc.
1.00 No 4,046.56 4,046.56
C76 Thermometer non contact Infra red Fluke model 62 Max or
similar.
2.00 No 6,695.36 13,390.72
C77 Cutter cable Taparia CC 32 or similar. 4.00 No 365.12 1,460.48 C78 Stripper wire Taparia model WS 05 or similar. 4.00 No 59.36 237.44
Page 9 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
C79 Soldering iron 25 W. 2.00 No 347.20 694.40 C80 Soldering iron 75 W. 2.00 No 666.40 1,332.80 C81 Vaccum cleaner Karcher model NT 75/2 AP ME TC or better
along with 10 meters cable and other standard equipment and
items.
1.00 No 80,834.88 80,834.88
C82 Chimney electrical Faber model Stilux energy LTW 60 or
Kuuchina model Auto clean florentine or better.
2.00 No 20,149.92 40,299.84
C83 Dust bin with foot pedal Nilkamal model ROTO RWB120L1 blue
or better.
10.00 No 2,830.24 28,302.40
C84 Gas stove 4-burner crystal make Sun-flame or similar. 2.00 No 8,121.12 16,242.24 C85 Mixer grinder Philips Model HL-1643/06 or better. 2.00 No 3,407.04 6,814.08 C86 Safety helmet Karam model PN542 or similar. 5.00 No 706.72 3,533.60
20,98,630.24 Total for Bill No 13C
Page 10 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
D1 Desktop PC all-in-one HP model PRO ONE 400 G3 or better
with windows 10 and 1year internet security license.
10.00 No 61,356.96 6,13,569.60
D2 Printer laser colour HP model color laserjet pro M154a or
better.
5.00 No 24,347.68 1,21,738.40
D3 Printer laser HP model LaserJet pro P1108 or better. 3.00 No 8,960.00 26,880.00 D4 Scanner A4 Canon model DR-F120 or better. 1.00 No 26,685.12 26,685.12 D5 Copier digital A3 size Canon model IR advance C3520 or better. 2.00 No 2,61,008.16 5,22,016.32
D6 UPS MICROTEK model Twin guard pro+ 1000 VA or better. 10.00 No 4,674.88 46,748.80 D7 RO plus water Cooler ION Exchange model ZERO-B ECO CHILL
20-40-20 or similar.
2.00 No 1,13,516.48 2,27,032.96
D8 Refrigerator 190 L 5-star rating single door stablizer free make
Samsung or better.
1.00 No 16,556.96 16,556.96
D9 Shredder paper, CD BAMBALIO model BCC 2700(Desire) or
better.
2.00 No 3,894.24 7,788.48
D10 Camera digital Sony cyber shot model DSC-WX350 or better. 2.00 No 17,432.80 34,865.60 D11 Kettle electric Philips model HD4649 or better. 2.00 No 2,727.20 5,454.40 D12 Microwave Oven Godrej GME 720 CP1 PM or better. 2.00 No 9,494.24 18,988.48 D13 Desk executive Godrej model WT-718+RHS+ERU or better. 1.00 No 35,305.20 35,305.20 D14 Desk junior executive Godrej model ENTERPRISE 1500 or
better.
4.00 No 18,769.33 75,077.32
D15 Desk Godrej model T101 or better. 5.00 No 10,296.53 51,482.65 D16 Table Conference Godrej model SENATE (10Seater) or better. 1.00 No 85,568.00 85,568.00 D17 Table Canteen Godrej modeL TIMEOUT six Seater PU Coated or
better along with 6 Chairs Godrej model Unwind cafe without
arms or better
4.00 Set 28,177.33 1,12,709.32
D18 Table computer Godrej model Companion C2 or better. 2.00 No 9,555.47 19,110.94 D19 Chair mid back Godrej model Bravo -7046R or better. 10.00 No 6,812.40 68,124.00 D20 Chair high back Godrej model KAREENA high back or better. 2.00 No 11,923.33 23,846.66 D21 Chair visitor Godrej model Multipurpose CH-4012 IW or better. 20.00 No 3,493.47 69,869.40
D22 Sofa set 3+1+1 Godrej model ARISTOCRAT or better. 1.00 Set 1,32,583.73 1,32,583.73
Bill No 13D - Supply and commissioning of office equipment and furniture
Page 11 of 13
-
S. No. Description of Item Qty Unit Rate with GST
& Cess
Amount
D23 Cabinet Filing 4 drawer Vertical with lockers size 1320 H x 470
W x 620 D mm make Godrej or better.
5.00 No 16,780.40 83,902.00
D24 Almirah Godrej model VSDU-7 or better. 5.00 No 18,997.07 94,985.35 D25 Cabinet personal 6 lockers size 380 W x 450 D x 1830 H in mm
make Godrej or better.
15.00 No 13,278.53 1,99,177.95
D26 Steel rack slotted angle 7-shelves 1950 mm x 900 mm x 450
mm, MS angle 50 x 50 mm make Godrej or better.
2.00 No 13,370.00 26,740.00
D27 Work table modular 2400 mm (L) x 1200 mm (W) x
(900+1050) mm (H) with cabinet and other accessories. Frame
60x32x2mm ERW square tube heavy duty construction with
epoxy polyster powder coating, 30mm thick marine grade
polywood work top thick marine grade plywood work top with
2mm thick edge tape and 3mm thick MS powder coated
sheet/SS 304 cover on top, make Modern lab engineers chennai
or similar.
2.00 No 1,99,733.33 3,99,466.66
D28 Work table modular 2400 mm (L) x 600 mm (W) x (900+1050)
mm (H) with cabinet and other accessories. Frame 60x32x2mm
ERW square tube heavy duty construction with epoxy polyster
powder coating, 30mm thick marine grade polywood work top
thick marine grade plywood work top with 2mm thick edge
tape and 3mm thick MS powder coated sheet/SS 304 cover on
top, make Modern lab engineers chennai or similar.
2.00 No 1,10,133.33 2,20,266.66
D29 Table Heavy duty modular 900 mm (L) x 750 mm (W) x 900
mm (H) with cabinet and other accessories. Frame 40x40x2mm
ERW square tube heavy duty construction with epoxy polyster
powder coating, top 40 mm thick marine grade polywood work
top thick marine grade plywood work top with 2mm thick
polished granite, make Modern lab engineers Chennai or
similar.
2.00 No 16,800.00 33,600.00
D30 Bench work structure 50 mm x 50 mm x 6 mm angle with 3 mm
SS top with support/ strippner on sides and bottom. Table top
size 1500 mm (L) x 900 mm (W) x 900 mm (H).
2.00 No 26,133.33 52,266.66
34,52,407.62 Total for Bill No 13D
Page 12 of 13
-
Sl No DescriptionAmount of bid price on
which applicable (Rs.)
Rate of the tax as on seven (7) days
prior to last date of submission of bidAmount (Rs.)
1 GST 0.00 12.00% -₹
2Any other Tax(es)
(Please specify)
Total=
Annexure- I
Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant
in connection with construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”
TENDER No: ERO/MMD/RVNL/810/1162 dated-11.08.2020
top related