bill of quantities preamble -...

of 2

Bill of Quantities PREAMBLE

1. The Bill of Quantities shall be read in conjunction with the Instructions to Bidders, General

Conditions, Particular Conditions of Contract, Works Requirement (Technical Specifications, and Drawings).

2. The quantities given in the Bill of Quantities are estimated and provisional and are given to provide a common basis for bidding. The basis of payment will be the actual quantities

of work ordered and carried out including spares to be handed over to Railway, as

measured by the Contractor and verified by the Engineer and valued at the rates and

prices tendered in the priced Bill of Quantities, where applicable, and otherwise at such

rates and prices as the Engineer may fix within the terms of the Contract. If any

quantities which have been supplied by the contractor and paid by RVNL are

determined to be surplus by the Engineer (except those quantities which become

surplus due to change in planning/scheme by Railway/RVNL) during the progress

of the work or at the completion of the work, shall be taken back by the contractor,

and the payment made for such materials shall be recovered from the pending

claims. The materials which have become surplus due to change in

planning/scheme by Railways/RVNL and are still in usable condition shall be taken

over by RVNL and any part payment still to be made shall be released to the

contractor.

3. In the Bill of Quantities, quantity and unit rates and thereby the amount against each item have been indicated. From this, the estimated price of each bill has been worked out and

indicated in the summary sheet in BOQ. The Bidder shall quote rates as percentage

above/below/at par for each schedule in the summary sheet. If no percentage as above,

below or at par is indicated for any particular bill, the same will be considered as

percentage at par.

4. The rates for each bill shall be written in indelible ink or type written in the summary sheet against each bill, in both words and figures, while clearly indicating whether the

percentage quoted is above/below/at par over the estimated rate in the respective

columns. The price for each bill shall accordingly be calculated and written against each

bill in both words and figures. The total price, as the sum of prices of all bills shall be

shown at the bottom of the summary sheet. The total price shall also be written in both

words and figures.

5. General directions and descriptions of work and materials are not necessarily repeated or detailed in the Bill of Quantities. References to the relevant specifications and sections of

the contract documentation should be made before quoting rates in the Bill of Quantities.

6. The rates and prices Bid in the priced Bill of Quantities shall, except as otherwise provided under the Contract, include all construction equipment, plant, labour,

supervision, materials, erection, maintenance, insurance, profit, royalty, octroi, taxes and

duties, together with all general risks, liabilities and obligations set out or implied in the

of 2

Contract.

7. The rates are deemed to be inclusive of all lead (except as otherwise specifically provided in the description of the particular item), lifts, ascend, descend, handling, rehandling crossing of nallah/streams/tracks any other obstructions.

8. All enabling works for executing the work e.g. approach road to site, launching arrangements, procuring right of way, arrangement of water and electricity etc is to be

arranged by the contractor at his own cost and deemed to be included in the quoted

rates.

9. Storage of Material: All the material at site will have to be properly stacked & stored so as to facilitate inspection. The material should be properly protected from the detrimental

effects of nature and fire, theft etc. The contractor shall be responsible for watch & ward

and any loss or deterioration on account of above shall lead to rejection of material and

contractor has to replace the same at his own cost.

10. The method of measurement of completed work for payment shall be in accordance with provisions in Works Requirements (Specifications) except as otherwise specifically

provided in the description of item or particular bill of quantities or explanatory notes to

the particular bill of quantities.

(A GOVT. OF INDIA ENTERPRISE)

9th Floor, 50, Chowringhee Road,

Kolkata – 700071

TENDER DOCUMENT

TENDER No: ERO/MMD/RVNL/810/1162 dated-11.08.2020

Tender for "Mechanical works comprising Supply, Erection, Testing &

Commissioning of Machinery & Plant in connection with construction of main line

EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”

VOLUME – III

Quoting Sheet

ENGINEERING PROJECTS (INDIA) LIMITED

In Figure In Words In Figure In Words

1 13-A

Supply, installation, testing and

commissioning of major machinery & plants8,23,72,459.68₹

2 13-B

Supply, installation, testing and

commissioning of other machinery and

plants pipeline and Storage racking system 1,87,13,831.36₹

3 13-C

Supply and commissioning of tools, gauges,

instruments & plants20,98,630.24₹

4 13-D

Supply and commissioning of office

equipment and furniture34,52,407.62₹

5 Total 10,66,37,329.00₹

Seal & Sign of Bidder


ENGINEERING PROJECTS (INDIA) LTD.

(A Govt. of India Enterprise)

Eastern Regional Office, Kolkata

Price Bid

Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant in connection with construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”

iii) The breakup of cost and levies such as GST and other Taxes considered in the above quoted prices should be submitted separately as per Annexure- I

Note: ii) Amount in figures and amount in words must be filled in the designated cell as depicted above.

Sl No. Description Estimated Project Cost

BIDDER'S PRICE

i) The quoted price by the bidder shall be inclusive of all taxes, duties, cess, levies, Fees, royalty etc. and Goods and Service Tax (GST).

Bill No. % QUOTE ABOVE /AT PAR/

BELOW

AMOUNT IN Rs.

(after considering percentage above, at

par or below)

Sl.No Bill No Description of Schedule Estimated Cost (Rs) Bidder's Price (Rs.)

1

13-A Supply, installation, testing and

commissioning of major machinery &

plants

8,23,72,459.68₹ -₹

2

13-B Supply, installation, testing and

commissioning of other machinery and

plants pipeline and Storage racking

system

1,87,13,831.36₹ -₹

3

13-C Supply and commissioning of tools,

gauges, instruments & plants20,98,630.24₹ -₹

4

13-D Supply and commissioning of office

equipment and furniture 34,52,407.62₹ -₹

Sub total Mechanical 10,66,37,328.90₹ -₹

ABSTRACT FOR MECHANICAL WORKS

Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant in connection with

construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”


S. No. Description of Item Qty Unit Rate with GST

& Cess

Amount

A1 CNC under Floor Wheel Lathe (BG) 1.00 No 5,02,53,912.80 5,02,53,912.80 A2 EOT Crane 30T 2.00 No 97,05,287.20 1,94,10,574.40 A3 Rail cum road vehicle 350T 1.00 No 1,27,07,972.48 1,27,07,972.48

8,23,72,459.68

B1 Scissor lift 1T 4.00 No 8,27,825.60 33,11,302.40 B2 Air Compressor 500 cfm 1.00 No 17,20,222.56 17,20,222.56 B3 Fork Lift Truck 3T 1.00 No 11,97,912.80 11,97,912.80 B4 Scissor lift 4T 1.00 No 18,01,739.52 18,01,739.52 B5 Gas Chromatograph 1.00 No 10,22,608.16 10,22,608.16 B6 Platform Truck 2T 2.00 No 5,49,482.08 10,98,964.16 B7 Ultrasonic Flaw Detector 2.00 No 2,61,102.24 5,22,204.48 B8 Stacker 1T 1.00 No 10,10,432.64 10,10,432.64 B9 Portable Transformer Oil Filtration Plant 5000LPH 1.00 No 6,81,739.52 6,81,739.52

B10 Trolley mounted fire fighting equipment 2.00 No 2,72,695.36 5,45,390.72 B11 Trestle- one set comprising 4 trestles each designed for 15T

capacity as per schematic sketch no B13

2.00 Set 1,95,623.68 3,91,247.36

B12 Battery charging and discharging panel 1.00 No 3,70,366.08 3,70,366.08 B13 E-Loader 2.00 No 1,51,004.00 3,02,008.00 B14 Tester diagnostic insulation 5KV Motwane model 5K-PI or

similar with 3x10m test leads with large insulated clamps, RS

232 communication cable, Usb cable RS 232 to USB converter,

software CD & other standard accessories etc.

1.00 No 2,02,700.96 2,02,700.96

B15 Welding plant MMA 1.00 No 1,34,594.88 1,34,594.88 B16 Hand pallet truck 2500Kg Godrej model GPT 2500 or similar 4.00 No 22,410.08 89,640.32 B17 Pneumatic Pipeline with Accessories - - (a) 80 mm pipe with elbow, bends, T joints, nipples, reducers etc 1,050.00 m 1,333.92 14,00,616.00 (b) 25 mm pipe with elbow, bends, T joints, nipples, reducers etc 355.00 m 206.08 73,158.40 (c) Valve 80 mm 6.00 No 11,689.44 70,136.64 (d) Valve 25 mm 100.00 No 2,434.88 2,43,488.00 (e) QRC 25 mm 100.00 No 974.40 97,440.00 (f) Filter regulator 1" 100.00 No 8,396.64 8,39,664.00

BILL OF QUANTITIES FOR MECHANICAL WORKS

Total for Bill No 13A

Bill No 13A-Bill of Quantities for Mechanical Engineering Works

Bill No 13B- Supply, installation, testing and commissioning of other machinery and plants pipeline and Storage racking system

Page 4 of 13


& Cess

Amount

(g) Auto drain valve 100.00 No 7,545.44 7,54,544.00 (h) Pressure gauge 8" 6.00 No 2,364.32 14,185.92 (i) Pneumatic Gun with Hose 15.00 No 340.48 5,107.20

B18 Storage Racking system (3 level) - - (a) Starter Bay 2.00 No 16,264.64 32,529.28 (b) Extension Bay 8.00 No 13,732.32 1,09,858.56 (c) Pallet Cage 80.00 No 8,375.36 6,70,028.80

1,87,13,831.36

C1 Drilling machine electrical 16 mm Bosch model GBM 1600 RE

professional or similar along with spare HSS drill bit(parallel)

set 3mm to 12mm.

2.00 No 8,064.00 16,128.00

C2 Drilling machine electrical 13 mm Bosch model GBM 13 RE

Professional or similar along with spare HSS drill bit(parallel)

set 3 mm to 12 mm.

2.00 No 4,382.56 8,765.12

C3 Grinder angle pneumatic heavy duty 4" disc dia Chicago

pneumatic model CP 7540-C or similar with inlet quick coupler

and one dozen 4" grinding wheels.

1.00 No 19,477.92 19,477.92

C4 Grinder angle pneumatic heavy duty 5" disc dia CP model

CP7550-A or similar with 05 grinding wheels, quick release

coupling & adopter etc.

1.00 No 58,434.88 58,434.88

C5 Grinder angle hand held 4" power spindle BOSCH model GWS

900-100 professional or similar with 05 grinding wheels 4"

make Bosch or similar.

2.00 No 2,749.60 5,499.20

C6 Cutter abrasive saw Bosch or similar 2400 W cutting capacity:

rectangle 85 mm x 180mm, Square 110 mm x 110 mm & L-

profile 130 mm x 130 mm No-load speed 3800 rpm grinding

disc diameter 355 mm grinding bore diameter 25.4 mm.

2.00 No 9,252.32 18,504.64

C7 Spanner set double open end set of 12 pieces TAPARIA model

DEP 12 or similar.

4.00 Set 548.80 2,195.20

C8 Spanner single open end with raised collar Taparia model SER

or similar for set of 6 pieces size 60, 65, 70, 75, 80, 85 mm.

4.00 Set 16,522.24 66,088.96

Total for Bill No 13B

Bill No 13C- Supply and commissioning of tools, gauges, instruments & plants

Page 5 of 13


& Cess

Amount

C9 Spanner set double ended ring set of 12 pieces of size 6x7, 8x9,

10x11, 12x13, 14x15, 16x17, 18x19, 20x22, 21x23, 24x27,

25x28, 30x32 mm TAPARIA model 1812 or similar.

5.00 Set 1,169.28 5,846.40

C10 Spanner set ring spanner deep offset pattern, GRIP-RITE

configuration model EVEREST or similar for set of 12 pieces of

size 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22,

21x23, 24x26, 25x27, 30x32 mm.

8.00 Set 1,495.20 11,961.60

C11 Socket hexagonal set 12.7 mm TAPARIA model S-14HXL (22

sockets + 5 accessories) or similar.

4.00 Set 2,955.68 11,822.72

C12 Wrench adjustable TAPARIA model 1173N-12 or similar. 4.00 No 324.80 1,299.20 C13 Wrench pipe heavy duty TAPARIA model HPW 24 or similar. 4.00 No 1,435.84 5,743.36 C14 Wrench pipe heavy duty Taparia model HPW 18 or similar. 4.00 No 1,049.44 4,197.76 C15 Plier combination TAPARIA model 1621-8N or similar. 5.00 No 178.08 890.40 C16 Plier bent nose TAPARIA model BN- 06 or similar. 2.00 No 153.44 306.88 C17 Plier long nose Taparia model 1430-6 or similar. 2.00 No 155.68 311.36 C18 Plier circlip internal Taparia model 1444-7S or similar. 2.00 No 183.68 367.36 C19 Plier circlip external Taparia model 1443-7 or similar. 2.00 No 183.68 367.36 C20 Puller two legs forged from chrome vanadium steel arms links

chrome plated to IS 9193 of size 40 to 250 mm spread.

2.00 No 720.16 1,440.32

C21 Crimping tool set. 1.00 Set 2,92,174.40 2,92,174.40 C22 Wrench chain pipe TAPARIA model CPW 06 or similar. 4.00 No 3,841.60 15,366.40 C23 Wrench chain pipe TAPARIA model CPW 12 or similar. 2.00 No 8,512.00 17,024.00 C24 Hammer ball pein Taparia model WH 800 B/C or similar. 10.00 No 285.60 2,856.00 C25 Screw driver size 5 x 100 mm Taparia model 934 I or similar. 10.00 No 36.96 369.60 C26 Screw driver size 5 x 300 mm Taparia model 939 I or similar. 10.00 No 48.16 481.60 C27 Chisel octagonal Taparia model 102 or similar. 2.00 No 73.92 147.84 C28 Chisel octagonal Taparia model 105 or similar. 2.00 No 127.68 255.36 C29 Punch centre TAPARIA model 1986 or similar. 5.00 No 52.64 263.20 C30 Torque wrench 1" sq. drive Hytorc model BTST-1400ER or

similar.

2.00 No 28,896.00 57,792.00

C31 Torque wrench 3/4" sq. drive Hytorc model BTST-500DR or

similar.

2.00 No 9,826.88 19,653.76

C32 Torque wrench 1" sq. drive Hytorc model BTST-1000ER or

similar.

2.00 No 18,708.48 37,416.96

C33 Torque wrench 1/2" sq. drive Hytorc model BTST-250CR or

similar.

2.00 No 4,519.20 9,038.40

Page 6 of 13


& Cess

Amount

C34 Torque wrench 1/2" sq. drive Hytorc model BTST-100CR or

similar.

2.00 No 3,797.92 7,595.84

C35 Torque wrench 3/8" sq. drive Hytorc model BTST-24BR or

similar.

2.00 No 2,658.88 5,317.76

C36 Torque wrench 3/8" sq. Drive Hytorc model BTST-100CR or

similar.

2.00 No 3,700.48 7,400.96

C37 Trolley for carry both DA and Oxygen gas cylinders Messer

three wheel cylinder trolley item code no 80830249 or similar.

1.00 No 10,615.36 10,615.36

C38 Trolley heavy duty hand operated capacity 500 kg platform size

of 500 mm x 800 mm mounted on two axles four solid rubber

wheels swiveling handle for turning trolley. Suitable support

shall be provided on side of the platform to height minimum

300 mm to handle paint drum etc.

2.00 No 13,147.68 26,295.36

C39 Pump water horizontal centrifugal portable type capacity 20

cum/hr ,head 22 MWC complete with electric motor of 3.7 KW

Mather and Platt model MISO 32-125 or similar.

2.00 Set 34,087.20 68,174.40

C40 Pump water self priming centrifugal monoblock, 1.0 HP, 220V,

260 LPH, complete with cable, DOL starter, suction and delivery

pipe 10 m, moveable trolley with canopy & starter stand.

2.00 No 28,730.24 57,460.48

C41 Pump submersible dewatering 1.75 HP Kirloskar model

ETERNA 1300BW or similar.

2.00 No 20,316.80 40,633.60

C42 Pump barrel motorised inlet 3/4", 230V single phase for

pumping diesel, kerosene, SAE90 lubricating etc.

2.00 No 20,316.80 40,633.60

C43 Micrometre digital external 0-150 mm MITUTOYO MODEL 340-

251-30 or similar.

1.00 No 29,972.32 29,972.32

C44 Micrometre digital external 150-300 mm MITUTOYO MODEL

340-252-30 or similar.

1.00 No 38,888.64 38,888.64

C45 Micrometre internal 5-30 mm MITUTOYO MODEL 145-185 or

similar.

1.00 No 8,302.56 8,302.56

C46 Vernier calliper outside 0-300 mm MITUTOYO MODEL 500-754-

10 or similar.

1.00 No 17,623.20 17,623.20

C47 Vernier height gauge digital 0-450 mm MITUTOYO MODEL 514-

104 or similar.

1.00 No 32,809.28 32,809.28

Page 7 of 13


& Cess

Amount

C48 Tape steel 15 M measuring range make Freeman model

Freemans measures engineer long steel 13mm 15 M or similar.

2.00 No 282.24 564.48

C49 Tape steel 30 M measuring range make Freeman model

Freeman measures engineer long steel 13mm 30 M or similar.

2.00 No 458.08 916.16

C50 Tape steel 3 M measuring range Freeman model Freeman

measures 2 Lock 3Meters 16mm or similar.

5.00 No 50.40 252.00

C51 Tape stelel 5 M measuring range make Freeman model Hi-Matt

5M/19mm with Revolutionary End Hook or similar.

5.00 No 124.32 621.60

C52 Weighing digital scale 200 Kg, 0.6m x 0.6 m table accuracy 20

gm with LED display, inbuilt battery backup TULAMAN model

EPS 200kg or similar.

2.00 No 9,934.40 19,868.80

C53 Weighing spring balance 0-50 Kg, LC 0.5 Kg. 2.00 No 1,636.32 3,272.64 C54 Vice pipe TAPARIA model PV 04 or similar. 4.00 No 4,027.52 16,110.08 C55 Gauge digital wheel distance PIE model WG 1 (E) or similar. 2.00 No 45,140.48 90,280.96 C56 Gauge wheel defect (flat face 50mm, condemning thickness

22mm) PIE model TDG-1 or similar.

2.00 No 5,517.12 11,034.24

C57 Gauge digital wheel dia for MEMU as per PIE model WD-1(D) or

similar.

2.00 No 57,178.24 1,14,356.48

C58 Gauge buffer height for MEMU PIE model BHG-3 or similar. 2.00 No 24,075.52 48,151.04 C59 Gauge digital flange wear for MEMU PIE model FWG-1(D) or

similar.

2.00 No 18,558.40 37,116.80

C60 Gauge digital root wear for MEMU PIE model RWG-1(D) or

similar.

2.00 No 18,558.40 37,116.80

C61 Gauge tread wear for MEMU PIE model TWG-1 or similar. 2.00 No 13,040.16 26,080.32 C62 Lamp LED based 1000 lumen range (approx) rechargeable

Felix model. UC 30 or similar along with lanyard, holster, spare

O rings, USB charging cable, Battery, spare rubber switch boot

etc.

15.00 No 5,356.96 80,354.40

C63 Grease gun lever operated , chrome vanadium steel, pressure

bar length 320mm, dia 56mm and overall length

430mm(approx).

2.00 No 2,064.16 4,128.32

C64 Multimeter benchtop Metravi model M-3510A or similar with

standard test leads, power line cord, USB cable, USB & GPI B

remote control interfaces, software application CD etc.

2.00 No 60,488.96 1,20,977.92

Page 8 of 13


& Cess

Amount

C65 Tester Insulation digital Motwane model i-12 or similar with

test leads set, test leads set with crocodile clips, carrying case,

main eliminator, batteries, fuse etc.

2.00 No 7,207.20 14,414.40

C66 Tester Insulation 1000 V hand driven WACO model WI - 1003/

Rishabh or similar.

1.00 No 6,204.80 6,204.80

C67 Tester insulation 500 V hand driven WACO model WI-502/

Rishabh or similar.

1.00 No 5,663.84 5,663.84

C68 Tester inter turn short circuit Metravi model Little giant or

similar along with all accessories, items, battery etc.

1.00 No 14,608.16 14,608.16

C69 Meter micro ohm bench top MOTWANE model LR2045-S or

similar with set of test leads with GP kelvin clip, set of test leads

with heavy duty crocodile clip, C clamp with long test leads, test

leads with heavy duty bond testing probes, USB interface cable,

protection fuses, main cord.

1.00 No 60,391.52 60,391.52

C70 Meter clamp AC/DC Fluke model 374 true rms AC/DC or

similar with AC220 alligator clip set, TP1 test probe (flat blade),

carrying case, C550 tool bag, TL75 test lead set etc.

1.00 No 43,433.60 43,433.60

C71 Meter Lux digital KUSAM-MECO model KM-LUX-200K or

similar with soft carrying case,light sensor, battery etc.

1.00 No 3,027.36 3,027.36

C72 Meter vibration digital METVARI model AVD-80 or similar with

accelerometer probe and carrying case.

1.00 No 28,730.24 28,730.24

C73 Meter anenometer digital thermo KUSAM-MECO model KM-909

or similar with battery, carrying case, probes etc.

1.00 No 6,665.12 6,665.12

C74 Meter LCR MECO model LCR999A or similar with short circuit

plate, 7.2V Ni MH rechargeable battery, 9V/150mA AC adaptor,

4-terminal kelvin test leads, SMD 4 terminal kevin test

tweezers, banana plugs-crocodile clip test leads, min USB

communication cable etc.

1.00 No 22,887.20 22,887.20

C75 Tachometer contact/Non-contact KUSAM-MECO model KM

2241 or similar with carrying case, surface speed test wheel,

cone & funnel RPM adapters, 2pcs of reflecting tape, AC adaptor

etc.

1.00 No 4,046.56 4,046.56

C76 Thermometer non contact Infra red Fluke model 62 Max or

similar.

2.00 No 6,695.36 13,390.72

C77 Cutter cable Taparia CC 32 or similar. 4.00 No 365.12 1,460.48 C78 Stripper wire Taparia model WS 05 or similar. 4.00 No 59.36 237.44

Page 9 of 13


& Cess

Amount

C79 Soldering iron 25 W. 2.00 No 347.20 694.40 C80 Soldering iron 75 W. 2.00 No 666.40 1,332.80 C81 Vaccum cleaner Karcher model NT 75/2 AP ME TC or better

along with 10 meters cable and other standard equipment and

items.

1.00 No 80,834.88 80,834.88

C82 Chimney electrical Faber model Stilux energy LTW 60 or

Kuuchina model Auto clean florentine or better.

2.00 No 20,149.92 40,299.84

C83 Dust bin with foot pedal Nilkamal model ROTO RWB120L1 blue

or better.

10.00 No 2,830.24 28,302.40

C84 Gas stove 4-burner crystal make Sun-flame or similar. 2.00 No 8,121.12 16,242.24 C85 Mixer grinder Philips Model HL-1643/06 or better. 2.00 No 3,407.04 6,814.08 C86 Safety helmet Karam model PN542 or similar. 5.00 No 706.72 3,533.60

20,98,630.24 Total for Bill No 13C

Page 10 of 13


& Cess

Amount

D1 Desktop PC all-in-one HP model PRO ONE 400 G3 or better

with windows 10 and 1year internet security license.

10.00 No 61,356.96 6,13,569.60

D2 Printer laser colour HP model color laserjet pro M154a or

better.

5.00 No 24,347.68 1,21,738.40

D3 Printer laser HP model LaserJet pro P1108 or better. 3.00 No 8,960.00 26,880.00 D4 Scanner A4 Canon model DR-F120 or better. 1.00 No 26,685.12 26,685.12 D5 Copier digital A3 size Canon model IR advance C3520 or better. 2.00 No 2,61,008.16 5,22,016.32

D6 UPS MICROTEK model Twin guard pro+ 1000 VA or better. 10.00 No 4,674.88 46,748.80 D7 RO plus water Cooler ION Exchange model ZERO-B ECO CHILL

20-40-20 or similar.

2.00 No 1,13,516.48 2,27,032.96

D8 Refrigerator 190 L 5-star rating single door stablizer free make

Samsung or better.

1.00 No 16,556.96 16,556.96

D9 Shredder paper, CD BAMBALIO model BCC 2700(Desire) or

better.

2.00 No 3,894.24 7,788.48

D10 Camera digital Sony cyber shot model DSC-WX350 or better. 2.00 No 17,432.80 34,865.60 D11 Kettle electric Philips model HD4649 or better. 2.00 No 2,727.20 5,454.40 D12 Microwave Oven Godrej GME 720 CP1 PM or better. 2.00 No 9,494.24 18,988.48 D13 Desk executive Godrej model WT-718+RHS+ERU or better. 1.00 No 35,305.20 35,305.20 D14 Desk junior executive Godrej model ENTERPRISE 1500 or

better.

4.00 No 18,769.33 75,077.32

D15 Desk Godrej model T101 or better. 5.00 No 10,296.53 51,482.65 D16 Table Conference Godrej model SENATE (10Seater) or better. 1.00 No 85,568.00 85,568.00 D17 Table Canteen Godrej modeL TIMEOUT six Seater PU Coated or

better along with 6 Chairs Godrej model Unwind cafe without

arms or better

4.00 Set 28,177.33 1,12,709.32

D18 Table computer Godrej model Companion C2 or better. 2.00 No 9,555.47 19,110.94 D19 Chair mid back Godrej model Bravo -7046R or better. 10.00 No 6,812.40 68,124.00 D20 Chair high back Godrej model KAREENA high back or better. 2.00 No 11,923.33 23,846.66 D21 Chair visitor Godrej model Multipurpose CH-4012 IW or better. 20.00 No 3,493.47 69,869.40

D22 Sofa set 3+1+1 Godrej model ARISTOCRAT or better. 1.00 Set 1,32,583.73 1,32,583.73

Bill No 13D - Supply and commissioning of office equipment and furniture

Page 11 of 13


& Cess

Amount

D23 Cabinet Filing 4 drawer Vertical with lockers size 1320 H x 470

W x 620 D mm make Godrej or better.

5.00 No 16,780.40 83,902.00

D24 Almirah Godrej model VSDU-7 or better. 5.00 No 18,997.07 94,985.35 D25 Cabinet personal 6 lockers size 380 W x 450 D x 1830 H in mm

make Godrej or better.

15.00 No 13,278.53 1,99,177.95

D26 Steel rack slotted angle 7-shelves 1950 mm x 900 mm x 450

mm, MS angle 50 x 50 mm make Godrej or better.

2.00 No 13,370.00 26,740.00

D27 Work table modular 2400 mm (L) x 1200 mm (W) x

(900+1050) mm (H) with cabinet and other accessories. Frame

60x32x2mm ERW square tube heavy duty construction with

epoxy polyster powder coating, 30mm thick marine grade

polywood work top thick marine grade plywood work top with

2mm thick edge tape and 3mm thick MS powder coated

sheet/SS 304 cover on top, make Modern lab engineers chennai

or similar.

2.00 No 1,99,733.33 3,99,466.66

D28 Work table modular 2400 mm (L) x 600 mm (W) x (900+1050)

mm (H) with cabinet and other accessories. Frame 60x32x2mm

ERW square tube heavy duty construction with epoxy polyster

powder coating, 30mm thick marine grade polywood work top

thick marine grade plywood work top with 2mm thick edge

tape and 3mm thick MS powder coated sheet/SS 304 cover on

top, make Modern lab engineers chennai or similar.

2.00 No 1,10,133.33 2,20,266.66

D29 Table Heavy duty modular 900 mm (L) x 750 mm (W) x 900

mm (H) with cabinet and other accessories. Frame 40x40x2mm

ERW square tube heavy duty construction with epoxy polyster

powder coating, top 40 mm thick marine grade polywood work

top thick marine grade plywood work top with 2mm thick

polished granite, make Modern lab engineers Chennai or

similar.

2.00 No 16,800.00 33,600.00

D30 Bench work structure 50 mm x 50 mm x 6 mm angle with 3 mm

SS top with support/ strippner on sides and bottom. Table top

size 1500 mm (L) x 900 mm (W) x 900 mm (H).

2.00 No 26,133.33 52,266.66

34,52,407.62 Total for Bill No 13D

Page 12 of 13

Sl No DescriptionAmount of bid price on

which applicable (Rs.)

Rate of the tax as on seven (7) days

prior to last date of submission of bidAmount (Rs.)

1 GST 0.00 12.00% -₹

2Any other Tax(es)

(Please specify)

Total=

Annexure- I

Tender for "Mechanical works comprising Supply, Erection, Testing & Commissioning of Machinery & Plant

in connection with construction of main line EMU Car Shed (Phase-2) at Khurda Road, Odisha (India)”


bill of quantities preamble -...

Documents