approved for gross vehicle weights • approved to din en 12642 … fileflexible aluminium body kit...
Post on 28-May-2019
214 Views
Preview:
TRANSCRIPT
■ GETO® Sider Alu curtainsider kit
• Approved for gross vehicle weights
of up to 12 t
• Approved to DIN EN 12642 Code XL
Appendix A. Payloads of up to 7000 kg
with Al sliding pillar and up to 10000 kg
with steel sliding pillar
TITG
EMEY
ER T
f161
8GB(
0313
)1
GETO® Sider Alu curtainsider kit
2 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Flexible aluminium body kit The new GETO® Sider Alu aluminium curtainsider kit is an extensionof the existing range of curtainsider kits which meets the technicaldemands of bodybuilders and vehicle owners alike. It is exceptionallyflexible and is easy to install.
The body kit comprises an aluminium front and aluminium rear frame,a GETO® Versus roof system, rear portal frames, aluminium slidingpillars as well as other accessories for trucks and trailers.
The design of every component is such that they can be ordered as acomplete body kit or as individual parts.
Lashing points approved to DIN EN 12640 are fitted into the front asstandard.
Bigger payloads possible The all-aluminium design of the GETO® Sider Alu and the resultingreduction in vehicle net weight are particularly beneficial for the haulage industry, which has been looking for toll-free vehicles especially, and this also translates into significantly bigger payloads.With no protruding components to get in the way of the cargo, thevehicle’s internal volume can be put to full use. GETO Sider Alu canalso be fitted out with aluminium dropsides.
Features at a glance• Weight of components significantly reduced• Bigger payloads possible• No protruding components in the load area• Can also be combined with dropsides • Easy to install• Good price-to-performance ratio• Lashing points approved to DIN EN 12640 fitted into the front as
standard• Coordinated range of accessories• Can be combined with other standard roof systems• Corrosion-proof: all aluminium profiles are powder-primed• Approved to DIN EN 12642 Code XL Appendix A
Payloads of up to 7000 kg with aluminium sliding pillarsPayloads of up to 10000 kg with steel sliding pillars
GETO® Sider Alu curtainsider kit
3Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
GETO® Sider Alu curtainsider kit
4 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Bulkhead An aluminium bulkhead approved to DIN EN12642 Code XL is available for the GETO SiderAlu. This front bulkhead is supplied without alifting roof, but with hollow aluminium profile-sections for panelling purposes. Two lashingpoints have been integrated into the bulkhead toensure that the cargo control meets the require-ments of DIN EN 12640.
Sliding pillars The lightweight, ergonomic handle makes operating the aluminium sliding pillar easy.Can also be used on vehicles with no lifting roof as required. Optional extra: riveted battenpockets spaced 50 mm apart. Approved for payloads of up to 7 t. With GETO Sider steel pillars approved for payloads of up to 10 t.
GETO® Sider Frame Base frame GETO Sider Frame is availablefor vehicles with a gross vehicleweight of between 7.5 and 26tonnes and a max. overall lengthof 7950 mm. The high-strengthfine-grain steel is hot-dip galvanised to ensure it remainscorrosion-proof.
5Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
GETO® Sider Alu curtainsider kit
GETO® Versus sliding roof GETO Versus sliding roofs stand out for their fast installation and ease of handling. Impact-absorbing folding panels ensure that the sliding roof can be opened and closed with ease. GETO Sider Alu is supplied as standard with the Kubus Light cantrail, butcan also be fitted with Kubus or Quadro cantrails.
GETO® Megaport II flush rear doorThe flush rear door can be combined withGETO Sider and GETO Sider Alu curtainsiderkits and bodywork systems with rear frame.Available with two or four leafs in heights of2330 mm to 3390 mm.
Rear door frame The GETO Sider Alu rear frame is made ofpowder-primed aluminium and has an exter-nal width of 2,550 mm and a clear aperturewidth of 2,480 mm. Sliding-roof and fixed-roof versions are available, each certified toDIN EN 12642 Code XL. Reinforcing bracketsprovide extra stability.
Scope of delivery:GETO Sider Alu (components shown in orange)
GETO® Sider Alu curtainsider kitBulkhead systems
6 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Standard front• Width 2550 mm• Integrated curtain fixing in the bulkhead• Bolt-on attachment to base assembly (for base frame height of 150 mm)• Built-in kick-strip• Lashing points approved to DIN EN 12640 fitted into the front• For aperture heights of up to 2850 mm
Depending on the design• For roof systems with aluminium cantrail, installation height: 100 mm• No central support• Bulkhead frame with bulkhead panelling made of aluminium profiles• Approved to DIN EN 12642 Code XL Appendix A
Options• Batten pockets• Batten storage
Material• Aluminium
Surface• Powder-primed aluminium profiles • Electrolytically galvanised brackets
Standard front with bulkhead panelling made of aluminium profiles Lashing points approved to DIN EN 12640 integrated into thebulkhead pillars
GETO® Sider Alu curtainsider kitRear frame systems
7Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Rear door frame• Width 2550 mm• Width of corner post 35 mm• Bolt-on attachment to base assembly (for base frame height of 150 mm)• For aperture heights of up to 2850 mm
Depending on the design• For roof systems with aluminium cantrail, installation height: 100 mm• Various end member heights: 100 und 120 mm• Approved to DIN EN 12642 Code XL Appendix A
Options• Batten pockets• Batten storage
Material• Aluminium
Surface• Powder-coated aluminium profiles • Electrolytically galvanised brackets
Rear frame, KTL-coated, black with loading platform and tail-lift flap
GETO® Sider Alu curtainsider kitSliding pillar systems
8 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Sliding pillarThe GETO Sider sliding pillar system is used as the centre post for the vehicle body. Simple one-handed operation ensures fastaccess to the loading area. The system’s locking mechanism providesa secure, flush join with the side rave. All individual components are compatible with the GETO Sider and GETO Sider Alu range.The standard version makes use of a 35 mm thick aluminium pillar,but the system can also be fitted with a steel sliding pillar from theGETO Sider range if heavier loads are being used.• Aluminium pillar approved for payloads of up to 7000 kg• Steel pillar approved for payloads of up to 10000 kg
Surface• Aluminium pillar Aluminium, mill finish,
locking components KTL-coated• Steel pillar KTL-coated
Material• Aluminium pillar Aluminium • Steel pillar S 700 MC
Options• Batten pockets and batten storage
Aluminium pillar without batten pockets
Steel pillar withbatten pockets
GETO® Sider Alu curtainsider kitAccessories
9Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
Tensioner
GETO® Sider Alu is supplied with the following accessories:
Curtain rollers • Designed to match the relevant cantrail profile
Part No. 250 998 036for Kubus
Kubus light
Part No. 250 998 035for Kubus
Kubus light
Curtain tensioning system• Hook-attachment profile• Tension tube “27” with pressed-on adapter• Tensioner or ratchet supplied to order• Fitting plates for tensioner or ratchet
Pelmets• Available in black or grey
Cast-steel, four-way ratchet tensionerPart No. 606 502 / 503
Steel ratchet with notch mechanismPart No. 606 504 / 505
10 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
GETO® Sider Alu curtainsider kitOther system components
GETO® Megaport IIGETO Megaport II flush rear doors are ideal for the vehicle manu -facturing sector. Their clean appearance makes them perfect for signwriting. They are not only lightweight but also very stable. • Door frames made of high-strength aluminium profiles• Filler panels made of 25 mm sandwich panelling• No visible seals• Concealed, continuous EPDM rubber tubing seals • The lock is located below the door leafs• Double pivoting hinge• Kick strip, built-in• Integrated customs-approved lock
For all those who have something to sayThe generous advertising space puts your message in the spotlight
GETO ® Megaport IIAvailable with two-leaf or four-leaf door
Loading made easyExceptionally easy to open thanks to the fail-safe double pivoting hinge
11Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL
GETO® Sider Alu curtainsider kitOther system components
GETO® Sider FrameThis GETO Sider Frame base assembly has been developed withvehicles with a maximum gross vehicle weight of between 7.5 and 26 tonnes in mind. • For bodywork and curtainsider kits• End member 150 mm high• 21 and 27 mm floor recess• Longitudinal member in heights of 100 mm, 120 mm, 140 mm• With matching side rave• For max. overall length of 7950 mm• All components hot-dip galvanised• Side rave with lashing bar• Quick and easy installation
GETO® VersusGETO Versus sliding roofs stand out for their impact-absorbing folding panels with centre spring elements which are designed toensure easy opening and closing – and therefore do away with theneed for hinges.
At a glance• Large, screw-on running rollers for very smooth gliding curtain• Quick and easy installation• Attractive price-to-performance ratio• Short delivery times• GETO Versus is particularly resistant to corrosion• Various types of cantrails• The modular design of GETO Versus makes it an ideal addition
to the TITGEMEYER curtainsider systems• Available as a fixed sliding roof
Can also be combined with a tail-lift: GETO ® Rear Header
The
tech
nica
l spe
cific
atio
ns c
onta
ined
in th
is b
roch
ure
are
appr
oxim
ate
and
no g
uara
ntee
is g
iven
as
to th
eir a
ccur
acy!
Des
igns
are
sub
ject
to c
hang
e. O
ur d
esig
n pr
opos
als
are
non-
bind
ing!
TI
TGEM
EYER
, GET
O an
d M
egap
ort a
re tr
adem
arks
, reg
iste
red
trade
mar
ks o
r pro
duct
nam
es b
elon
ging
to th
e re
spec
tive
title
hol
der.
Gebr. TITGEMEYER GmbH & Co. KGHannoversche Straße 97(Navigation: Hettlicher Masch 2)49084 Osnabrück, GermanyP.O. Box 43 2049033 Osnabrück, GermanyPhone: +49 (0)5 41/58 22-0Fax: +49 (0)5 41/58 22-494email: truckandtrailer@titgemeyer.comwww.titgemeyer.com
top related