■ GETO® Sider Alu curtainsider kit

• Approved for gross vehicle weights

of up to 12 t

• Approved to DIN EN 12642 Code XL

Appendix A. Payloads of up to 7000 kg

with Al sliding pillar and up to 10000 kg

with steel sliding pillar

TITG

EMEY

ER T

f161

8GB(

0313

)1

GETO® Sider Alu curtainsider kit

2 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Flexible aluminium body kit The new GETO® Sider Alu aluminium curtainsider kit is an extensionof the existing range of curtainsider kits which meets the technicaldemands of bodybuilders and vehicle owners alike. It is exceptionallyflexible and is easy to install.

The body kit comprises an aluminium front and aluminium rear frame,a GETO® Versus roof system, rear portal frames, aluminium slidingpillars as well as other accessories for trucks and trailers.

The design of every component is such that they can be ordered as acomplete body kit or as individual parts.

Lashing points approved to DIN EN 12640 are fitted into the front asstandard.

Bigger payloads possible The all-aluminium design of the GETO® Sider Alu and the resultingreduction in vehicle net weight are particularly beneficial for the haulage industry, which has been looking for toll-free vehicles especially, and this also translates into significantly bigger payloads.With no protruding components to get in the way of the cargo, thevehicle’s internal volume can be put to full use. GETO Sider Alu canalso be fitted out with aluminium dropsides.

Features at a glance• Weight of components significantly reduced• Bigger payloads possible• No protruding components in the load area• Can also be combined with dropsides • Easy to install• Good price-to-performance ratio• Lashing points approved to DIN EN 12640 fitted into the front as

standard• Coordinated range of accessories• Can be combined with other standard roof systems• Corrosion-proof: all aluminium profiles are powder-primed• Approved to DIN EN 12642 Code XL Appendix A

Payloads of up to 7000 kg with aluminium sliding pillarsPayloads of up to 10000 kg with steel sliding pillars

GETO® Sider Alu curtainsider kit

3Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

GETO® Sider Alu curtainsider kit

4 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Bulkhead An aluminium bulkhead approved to DIN EN12642 Code XL is available for the GETO SiderAlu. This front bulkhead is supplied without alifting roof, but with hollow aluminium profile-sections for panelling purposes. Two lashingpoints have been integrated into the bulkhead toensure that the cargo control meets the require-ments of DIN EN 12640.

Sliding pillars The lightweight, ergonomic handle makes operating the aluminium sliding pillar easy.Can also be used on vehicles with no lifting roof as required. Optional extra: riveted battenpockets spaced 50 mm apart. Approved for payloads of up to 7 t. With GETO Sider steel pillars approved for payloads of up to 10 t.

GETO® Sider Frame Base frame GETO Sider Frame is availablefor vehicles with a gross vehicleweight of between 7.5 and 26tonnes and a max. overall lengthof 7950 mm. The high-strengthfine-grain steel is hot-dip galvanised to ensure it remainscorrosion-proof.

5Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

GETO® Sider Alu curtainsider kit

GETO® Versus sliding roof GETO Versus sliding roofs stand out for their fast installation and ease of handling. Impact-absorbing folding panels ensure that the sliding roof can be opened and closed with ease. GETO Sider Alu is supplied as standard with the Kubus Light cantrail, butcan also be fitted with Kubus or Quadro cantrails.

GETO® Megaport II flush rear doorThe flush rear door can be combined withGETO Sider and GETO Sider Alu curtainsiderkits and bodywork systems with rear frame.Available with two or four leafs in heights of2330 mm to 3390 mm.

Rear door frame The GETO Sider Alu rear frame is made ofpowder-primed aluminium and has an exter-nal width of 2,550 mm and a clear aperturewidth of 2,480 mm. Sliding-roof and fixed-roof versions are available, each certified toDIN EN 12642 Code XL. Reinforcing bracketsprovide extra stability.

Scope of delivery:GETO Sider Alu (components shown in orange)

GETO® Sider Alu curtainsider kitBulkhead systems

6 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Standard front• Width 2550 mm• Integrated curtain fixing in the bulkhead• Bolt-on attachment to base assembly (for base frame height of 150 mm)• Built-in kick-strip• Lashing points approved to DIN EN 12640 fitted into the front• For aperture heights of up to 2850 mm

Depending on the design• For roof systems with aluminium cantrail, installation height: 100 mm• No central support• Bulkhead frame with bulkhead panelling made of aluminium profiles• Approved to DIN EN 12642 Code XL Appendix A

Options• Batten pockets• Batten storage

Material• Aluminium

Surface• Powder-primed aluminium profiles • Electrolytically galvanised brackets

Standard front with bulkhead panelling made of aluminium profiles Lashing points approved to DIN EN 12640 integrated into thebulkhead pillars

GETO® Sider Alu curtainsider kitRear frame systems

7Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Rear door frame• Width 2550 mm• Width of corner post 35 mm• Bolt-on attachment to base assembly (for base frame height of 150 mm)• For aperture heights of up to 2850 mm

Depending on the design• For roof systems with aluminium cantrail, installation height: 100 mm• Various end member heights: 100 und 120 mm• Approved to DIN EN 12642 Code XL Appendix A

Options• Batten pockets• Batten storage

Material• Aluminium

Surface• Powder-coated aluminium profiles • Electrolytically galvanised brackets

Rear frame, KTL-coated, black with loading platform and tail-lift flap

GETO® Sider Alu curtainsider kitSliding pillar systems

8 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Sliding pillarThe GETO Sider sliding pillar system is used as the centre post for the vehicle body. Simple one-handed operation ensures fastaccess to the loading area. The system’s locking mechanism providesa secure, flush join with the side rave. All individual components are compatible with the GETO Sider and GETO Sider Alu range.The standard version makes use of a 35 mm thick aluminium pillar,but the system can also be fitted with a steel sliding pillar from theGETO Sider range if heavier loads are being used.• Aluminium pillar approved for payloads of up to 7000 kg• Steel pillar approved for payloads of up to 10000 kg

Surface• Aluminium pillar Aluminium, mill finish,

locking components KTL-coated• Steel pillar KTL-coated

Material• Aluminium pillar Aluminium • Steel pillar S 700 MC

Options• Batten pockets and batten storage

Aluminium pillar without batten pockets

Steel pillar withbatten pockets

GETO® Sider Alu curtainsider kitAccessories

9Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

Tensioner

GETO® Sider Alu is supplied with the following accessories:

Curtain rollers • Designed to match the relevant cantrail profile

Part No. 250 998 036for Kubus

Kubus light

Part No. 250 998 035for Kubus

Kubus light

Curtain tensioning system• Hook-attachment profile• Tension tube “27” with pressed-on adapter• Tensioner or ratchet supplied to order• Fitting plates for tensioner or ratchet

Pelmets• Available in black or grey

Cast-steel, four-way ratchet tensionerPart No. 606 502 / 503

Steel ratchet with notch mechanismPart No. 606 504 / 505

10 Tf1618GB(0313)1Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

GETO® Sider Alu curtainsider kitOther system components

GETO® Megaport IIGETO Megaport II flush rear doors are ideal for the vehicle manu -facturing sector. Their clean appearance makes them perfect for signwriting. They are not only lightweight but also very stable. • Door frames made of high-strength aluminium profiles• Filler panels made of 25 mm sandwich panelling• No visible seals• Concealed, continuous EPDM rubber tubing seals • The lock is located below the door leafs• Double pivoting hinge• Kick strip, built-in• Integrated customs-approved lock

For all those who have something to sayThe generous advertising space puts your message in the spotlight

GETO ® Megaport IIAvailable with two-leaf or four-leaf door

Loading made easyExceptionally easy to open thanks to the fail-safe double pivoting hinge

11Tf1618GB(0313)1 Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-494 email: truckandtrailer@titgemeyer.comL

GETO® Sider Alu curtainsider kitOther system components

GETO® Sider FrameThis GETO Sider Frame base assembly has been developed withvehicles with a maximum gross vehicle weight of between 7.5 and 26 tonnes in mind. • For bodywork and curtainsider kits• End member 150 mm high• 21 and 27 mm floor recess• Longitudinal member in heights of 100 mm, 120 mm, 140 mm• With matching side rave• For max. overall length of 7950 mm• All components hot-dip galvanised• Side rave with lashing bar• Quick and easy installation

GETO® VersusGETO Versus sliding roofs stand out for their impact-absorbing folding panels with centre spring elements which are designed toensure easy opening and closing – and therefore do away with theneed for hinges.

At a glance• Large, screw-on running rollers for very smooth gliding curtain• Quick and easy installation• Attractive price-to-performance ratio• Short delivery times• GETO Versus is particularly resistant to corrosion• Various types of cantrails• The modular design of GETO Versus makes it an ideal addition

to the TITGEMEYER curtainsider systems• Available as a fixed sliding roof

Can also be combined with a tail-lift: GETO ® Rear Header

The

tech

nica

l spe

cific

atio

ns c

onta

ined

in th

is b

roch

ure

are

appr

oxim

ate

and

no g

uara

ntee

is g

iven

as

to th

eir a

ccur

acy!

Des

igns

are

sub

ject

to c

hang

e. O

ur d

esig

n pr

opos

als

are

non-

bind

ing!

TI

TGEM

EYER

, GET

O an

d M

egap

ort a

re tr

adem

arks

, reg

iste

red

trade

mar

ks o

r pro

duct

nam

es b

elon

ging

to th

e re

spec

tive

title

hol

der.

Gebr. TITGEMEYER GmbH & Co. KGHannoversche Straße 97(Navigation: Hettlicher Masch 2)49084 Osnabrück, GermanyP.O. Box 43 2049033 Osnabrück, GermanyPhone: +49 (0)5 41/58 22-0Fax: +49 (0)5 41/58 22-494email: truckandtrailer@titgemeyer.comwww.titgemeyer.com